The PARIS Forums: PARIS: Main » OT: ADAT & WC Sync

Home » The PARIS Forums » PARIS: Main » OT: ADAT & WC Sync

Show: Today's Messages :: Polls :: Message Navigator

OT: ADAT & WC Sync [message #70278]

Wed, 12 July 2006 23:45

Matthias Steinke
Messages: 7
Registered: April 2006

Junior Member

Hi Parisians,
Sorry for being possibly dumb, ignorant and somewhat off-topic.
I'm using the Apogee Big Ben as my master clock and Paris locks superbly
to it. Now I want to use my ADAT card in PARIS for a number of audio transfers
between another computer fitted with an RME HDSP9652. Would I need to use
the 9-pin sync on the ADAT card or is it enough to keep both PARIS and the
HDSP9652 connected to the Big Ben?

Matt

Report message to a moderator

Re: ADAT & WC Sync [message #70284 is a reply to message #70278]

Thu, 13 July 2006 06:14

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

The sync generated from the Paris ADAT will be the same as the Sync provided
by the Apogee Big Ben as long as Paris is slaved to the Big Ben. Just use a
9 pin sync cable from the paris ADAt module to the ADAT sync port on the RME
card. I'm syncing x RME HDSDP cards this way.,

DJ

"Matt Steinke" <matthias.steinke@ses-astra.com> wrote in message
news:44b5ebfa$1@linux...
>
> Hi Parisians,
> Sorry for being possibly dumb, ignorant and somewhat off-topic.
> I'm using the Apogee Big Ben as my master clock and Paris locks superbly
> to it. Now I want to use my ADAT card in PARIS for a number of audio
transfers
> between another computer fitted with an RME HDSP9652. Would I need to use
> the 9-pin sync on the ADAT card or is it enough to keep both PARIS and the
> HDSP9652 connected to the Big Ben?
>
> Matt

Report message to a moderator

Re: ADAT & WC Sync [message #70351 is a reply to message #70284]

Sun, 16 July 2006 23:38

Matthias Steinke
Messages: 7
Registered: April 2006

Junior Member

Thank you very much :-))

"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>The sync generated from the Paris ADAT will be the same as the Sync provided
>by the Apogee Big Ben as long as Paris is slaved to the Big Ben. Just use
a
>9 pin sync cable from the paris ADAt module to the ADAT sync port on the
RME
>card. I'm syncing x RME HDSDP cards this way.,
>
>DJ
>
>"Matt Steinke" <matthias.steinke@ses-astra.com> wrote in message
>news:44b5ebfa$1@linux...
>>
>> Hi Parisians,
>> Sorry for being possibly dumb, ignorant and somewhat off-topic.
>> I'm using the Apogee Big Ben as my master clock and Paris locks superbly
>> to it. Now I want to use my ADAT card in PARIS for a number of audio
>transfers
>> between another computer fitted with an RME HDSP9652. Would I need to
use
>> the 9-pin sync on the ADAT card or is it enough to keep both PARIS and
the
>> HDSP9652 connected to the Big Ben?
>>
>> Matt
>
>

Report message to a moderator

Previous Topic:	Monitoring in Mono
Next Topic:	Hello???

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed May 29 15:13:10 PDT 2024

Total time taken to generate the page: 0.01141 seconds