The PARIS Forums


Home » The PARIS Forums » PARIS: Main » How is everyone dealing with Serial ATA /PCI /EDS Issues..Work Arounds
How is everyone dealing with Serial ATA /PCI /EDS Issues..Work Arounds [message #58579] Wed, 28 September 2005 14:03 Go to next message
LaMont is currently offline  LaMont
Messages: 828
Registered: October 2005
Senior Member
stall them on
> other macs and it performed fine. bring theirs into mine and the same
> no works results ensued. hell. a single 867 notebook could smoke my
> dual 1.25 running the same data through it. after several months of
> the back and forth calling i was able to bypass all the lower folk and
> talk to the tech folk direct. it was shortly after that i was told
> that once i put anything into the computer ie. ram, drives or programs
> of any k
Re: How is everyone dealing with Serial ATA /PCI /EDS Issues..Work Arounds [message #58582 is a reply to message #58579] Wed, 28 September 2005 16:18 Go to previous messageGo to next message
Kim is currently offline  Kim
Messages: 1246
Registered: October 2005
Senior Member
"program has unexpectedly quit" box appearance
>>>>> preventing an app. from even loading.
>>>>>
>>>>> all of us have copied files from one drive to another only to have
>>>>> them disappear 5 minutes, the next day or later along with all the new
>>>>> edits; yes they were saved and had been reloaded. plugins that have
>>>>> worked for months stop working (oddly enough they will work for one
>>>>> song but not another or for one administrator and not the other).
>>>>> other times they can show up but when you click on them they open a
>>>>> new either non functioning or un closable rearranged version of the
>>>>> plug per click.
>>>>>
>>>>> i could see if this were just my mac as i was one of the fortunate
>>>>> ones to buy the limited production run (one month) infamous FW800
>>>>> single boot G4 that has just begun to function around v10.3.8. so yes
>>>>> i guess you are lucky beyond the scope of your wife. like those lucky
>>>>> enough to get the pc's we have all read about that work perfectly from
>>>>> day one the rest of us get the others that perform a bit less
>>>>> perfectly.
>>>>>
>>>>>
>>>>>
>>>>> On Tue, 27 Sep 2005 1
Re: How is everyone dealing with Serial ATA /PCI /EDS Issues..Work Arounds [message #58585 is a reply to message #58582] Wed, 28 September 2005 16:30 Go to previous messageGo to next message
LaMont is currently offline  LaMont
Messages: 828
Registered: October 2005
Senior Member
ounds@hotmail.com> wrote in message news:433b3298$1@linux...
>>
>>
>> Just noticed accidentally in a search... today marks the 1st anniversary
>> of the shutdown of Chuck's newserver.
>>
>> Good to see a year on that things are moving on as usual. Many of the old
>> crew are still around, and my server seems to be happy in it's role and
>> doing
>> the job pretty nicely. All the hardware is handling the load.
>>
>> In the next couple of months I'll be moving the server to a new home. :o)
>>
>> Cheers,
>> Kim.
>
>Amen!

"Aaron Allen" <nospam@not_here.dude> wrote:
>Thanks Kim.. good show dude.
>AA
>
>
>"Kim" <hiddensounds@hotmail.com> wrote in message news:433b3298$1@linux...
>>
>>
>> Just noticed accidentally in a search... today marks the 1st anniversary
>> of the shutdown of Chuck's newserver.
>>
>> Good to see a year on that things are moving on as usual. Many of the
old
>> crew are still around, and my server seems to be happy in it's role and

>> doing
>> the job pretty nicely. All the hardware is handling the load.
>>
>> In the next couple of months I'll be moving the server to a new home.
:o)
>>
>> Cheers,
>> Kim.
>
>Hehe, I didn't actually post this so you could all thank me. ;o) Though your
thanks are appreciated...

Perhaps we should make this official Chuck Duffy Day? Where we remember all
Chuck has done for Paris. :o)

Cheers,
Kim.

"Kim" <hiddensounds@hotmail.com> wrote:
>
>
>Just noticed accidentally in a search... today marks the 1st anniversary
>of the shutdown of Chuck's newserver.
>
>Good to see a year on that things are moving on as usual. Many of the old
>crew are still around, and my server seems to be happy in it's role and
Re: How is everyone dealing with Serial ATA /PCI /EDS Issues..Work Arounds [message #58586 is a reply to message #58585] Wed, 28 September 2005 16:49 Go to previous messageGo to next message
Kim is currently offline  Kim
Messages: 1246
Registered: October 2005
Senior Member
> doing
>the job pretty nicely. All the hardware is handling the load.
>
>In the next couple of months I'll be moving the server to a new home. :o)
>
>Cheers,
>Kim.Me too.

JH

cujo wrote:
> Amen!
>
> "Aaron Allen" <nospam@not_here.dude> wrote:
>
>>Thanks Kim.. good show dude.
>>AA
>>
>>
>>"Kim" <hiddensounds@hotmail.com> wrote in message news:433b3298$1@linux...
>>
>>>
>>>Just noticed accidentally in a search... today marks the 1st anniversary
>>>of the shutdown of Chuck's newserver.
>>>
>>>Good to see a year on that things are moving on as usual. Many of the
>
> old
>
>>>crew are still around, and my server seems to be happy in it's role and
>
>
>>>doing
>>>the job pretty nicely. All the hardware is handling the load.
>>>
>>>In the next couple of months I'll be moving the server to a new home.
>
> :o)
>
>>>Cheers,
>>>Kim.
>>
>>
>This is a multi-part message in MIME format.

---=_linux433b5aaa
Content-Type: text/plain
Content-Transfer-Encoding: 7bit


Dimitrios

At down of this page my Chorus presets.For mono much of variations for el.guitar,
cabs simulators, tremolo ...
Chorus stereo (Aux) with leslie presets.

Best Regards

Zmora



"zmora" <docent191@wp.pl> wrote:
>
>Hello Dimitrios
>
>It's my fault, no TapeDel but RoomRev for simulating spring rev.
>For TapeDel I used Wire of course.Chorus mono also good working as filter
>for el.guitar, something like cabsimule.I'll send to you some examples.Today
>Im little bit busy, it will be at night.
>
> Zmora
>
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>Bravo Zmora !
>>What do you do for dry mix on tap delay in mono insert ?
>>Regards,
>>Dimitrios
>>"zmora" <docent191@wp.pl> wrote in message news:433a05f9$1@linux...
>>>
>>> It was some general concept but chorus and Tape Delay mono insert I've
>>done
>>> by myself.TapeDel mono is fine for el.guitar too.
>>>
>>>
>>> "Dimitrios" <musurgio@otenet.gr> wrote:
>>> >Thanks Zmora.
>>> >Now I have chorus on insert !!
>>> >How did you find that ?
>>> >I was looking everywhere for some info but nothing about chorus....
>>> >I am thinking that maybe it was there from the start but I somehow missed
Re: How is everyone dealing with Serial ATA /PCI /EDS Issues..Work Arounds [message #58599 is a reply to message #58585] Wed, 28 September 2005 20:58 Go to previous messageGo to next message
RZ is currently offline  RZ   UNITED STATES
Messages: 61
Registered: July 2005
Member
gt; >> be
>>> >>>quite in league with RME and Lynx, but I installed a couple in A/V
>>media
>>> >>>systems and never had a problem for that use. They would do quite
> well
>>> >> with
>>> >>>a $500+ 8-channel ADDA unit using those converters.
>>> >>>
>>> >>>If you are looking for a DAW alternative to Paris, there are quite
> a
>>few
>>> >>>great options.
>>> >>>
>>> >>>I wouldn't trash Emu just because Paris couldn't survive. Emu didn't
>>>
>>> >>>really
>>> >>>have the money or resources to run with Paris anyway - I am guessing
>>> >>>Creative just said "okay, give it a try, but if it doesn't make money
>>> >>>instead of costing money, it's done."
>>> >>>
>>> >>>I have an Emu Audity 2000 - great rack synth. I have no intention
> of
>>> >>>selling it. Emu may not be running wild with cutting edge soft-synth
>>> and
>>> >>>hardware synth technology, but they do what they do, and it is a
>>> >>>niche
>>> for
>>> >>>them.
>>> >>>
>>> >>>Regards,
>>> >>>Dedric
>>> >>>
>>> >>>On 9/24/05 3:46 PM, in article 4335c918$1@linux, "Kim Glanville"
>>> >>><kgdrumz@telusplanet.com> wrote:
>>> >>>
>>> >>>>
>>> >>>> I hear you! And you're giving food for thought. From my little
>>> >>>> perspective, though, I also wax a bit philosophic about it:
>>> >>>> Paris lost the war w. Pro-tools, kinda like Sony's Betamax VCR lost
>>> the
>>> >> war
>>> >>>> to VHS. The 'better' formats lost--and investment stopped...but
>>you're
>>> >> right,
>>> >>>> those who spent the $$$ should not
>>> >>>> have been abandoned by Emu. Maybe Creative just wanted Paris
>>> >>>> so they could steal some of the great A/D converter stuff for
>>> >>>> Audigy!
>>> >>>>
>>> >>>> I'm also considering the portable convenience of a Tascam 2488,
>>> >>>> tho' pretty sure it won't sound as good Paris.
>>> >>>> Thanks,
>>> >>>> Kim
>>> >>>>
>>> >>>>
>>> >>>> "nobody" <no@no.com> wrote:
>>> >>>>>
>>> &g
Re: How is everyone dealing with Serial ATA /PCI /EDS Issues..Work Arounds [message #58604 is a reply to message #58599] Wed, 28 September 2005 23:23 Go to previous messageGo to next message
LaMont is currently offline  LaMont
Messages: 828
Registered: October 2005
Senior Member
am by mushkin. this ram was recommended either #1 02 at
every mac site i visited prior to buying the G4. ironically it turned
out that no mac service center had an accurate test for ram because
apple didn't have one. though months late in coming this info did
finally prompt me to purchase another band which did work better. i
should mention that i had in the mean time swapped out my ram with 2
other G4s with apple supplied ram that had not solved the problem.
mine worked in theirs while theirs didn't in mine. this i suppose is
why they kept replacing the other guts in mine.

after that then another issue arose and that was FW800 incompatibility
which apple says was the fault of everyone else. well, we all know
the answer to that one. that issue was more or less resolved by th
other manufacturers with the updates to their gear. for best
performance i still have to use FW400 for the audio drive and the 800
for storage...cool huh.

at present i'm on 10.3.9 which is now functioning the best since my
purchase. since my rig was more of a G5 than a G4 all those little
changes to take advantage of the 5s architecture performance and
stability have improved. i can sill run more tracks (on SX), plugins,
and vst instruments on my 3+ yr. old 2.6 P4 pc than i can on the mac
but the gap is closing.

"The statement that they (Apple) can't warranty it working with third
party products is unreasonable, you have a reasonable expectation of
it working when you bought it" true or not it's apples position that
problems are yours and not theirs. after all, you own a mac which is
like being a part of the second coming so it must be your fault.

all of this comes too little too late for me. it's sad, it took me 10
months of 16 hour days and a couple buckets of money to build my
studio. add another 6 years of 16 hour days building the business to
where i was making pretty good money. then came the mac and after 2
plus more years of trying to keep my dream alive i threw in the towel.
my wife and i plan on moving to oregon in about 3 years and i don't
wish to take 2 of those years to try to rebuild a client base and
reputation only to leave it when we move. so there you have it, i'm
just plain out of grease.

rick, sans his inner child ;o)





On 29 Sep 2005 13:45:36 +1000, "James McCloskey" <excelsm@hotmail.com>
wrote:

>
> Rick, it actually could be the RAM. Some systems act funny with different
>brands of RAM. I assume it shows up in the hardware profile? Have you tried
>other brands? How does it run with out the added memory? Have you tried
>different drives internally? What version of OSX are you running?
>
>The statement that they (Apple) can't warranty it working with third party
>products is unreasonable, you have a reasonable expectation of it working
>when you bought it. Apple can not guaranty that their product will or won't
>work with third party products, that is a given. I would ignore that statement,
>and do as I suggested, take it in, if that doesn't work hire an attorney
>to write a letter. Start with the BBB, it's free. Also bad press is not
>good, people have set up negative web sites and Apple ands up fixing the
>problem. iPod nano screen, etc.
>
>By the way Apple was number one for years in customer service and satisfaction.
> I believe they were rated number one again last year for the first time
>in years. I think reputatio
Re: How is everyone dealing with Serial ATA /PCI /EDS Issues..Work Arounds [message #58631 is a reply to message #58604] Thu, 29 September 2005 15:55 Go to previous messageGo to next message
Brandon is currently offline  Brandon   UNITED STATES
Messages: 49
Registered: June 2005
Member
b sites and Apple ands up fixing the
>>>problem. iPod nano screen, etc.
>>>
>>>By the way Apple was number one for years in customer service and satisfaction.
>>>I believe they were rated number one again last year for the first time
>>>in years. I think reputation is important to them, so don't give up.
>
> Remember,
>
>>>The squeaky wheel gets the grease!
>>>
>>>People have won many lawsuits against Apple, you just don't hear about
>
> it.
>
>>>Usually the issue is resolved with some form of remedy. I don't think
>
> you
>
>>>need to go as far as to file a suit with them, I think a letter will work.
>>>
>>>
>>>James
>>>
>>>
>>>rick <parnell68@hotmail.com> wrote:
>>>
>>>>james,
>>>>
>>>>i went through about 8 to 10 months of back and forth with apple on
>>>>this. they did replace the cpu, mobo, boot drive twice during this
>>>>period. the problem was is that they kept giving me the prototype
>>>>version. while it would benchmark fine once it was put in the real
>>>>world nothing worked. i could take my drives and install them on
>>>>other macs and it performed fine. bring theirs into mine and the same
>>>>no works results ensued. hell. a single 867 notebook could smoke my
>>>>dual 1.25 running the same data through it. after several months of
>>>>the back and forth calling i was able to bypass all the lower folk and
>>>>talk to the tech folk direct. it was shortly after that i was told
>>>>that once i put anything into the computer ie. ram, drives or programs
>>>>of any kind that apple could not and would not warranty it working
>>>>properly. in so far as informing apple of my situation, they knew
>>>>that this was a recording studio and my sole livelihood. after that i
>>>>exploded...(quietly) and hung up.
>>>>
>>>>as far as filing a suit goes i think the only successful suit brought
>>>>against apple was a class action one a couple of years ago.
>>>>
>>>>thanks
>>>>
>>>>
>>>>
>>>>On 29 Sep 2005 04:54:41 +1000, "James McCloskey" <excelsm@hotmail.com>
>>>>wrote:
>>>>
>>>>
>>>>>Hey Rick! Mac OSX 10.3.5 Panther is solid as a rock on all my systems.
>>>
>>>My
>>>
>>>>>opinion is that tiger is great, but it is not ready for prime time yet.
>>>
>>>>>if you want to do critical work don't go with tiger yet. Sorry to hear
>>>
>>>about
>>>
>>>>>all the problems with your system. In my years of experience as a user
>>>
>>>and
>>>
>>>>>a computer dealer, it's not like Apple to not address this type of issue.
>>>>>
>>>>>
>>>>>Here are some recommendations:
>>>>>
>>>>>If you have case numbers from the past, you should take your G4 in to
>
> an
>
>>>>>Apple store and have there tech guys fix it. If it is an unresolved
>
> issue
>
>>>>>with a case number they will still take care of it, if you have a case
>>>
>>>number.
>>>
>>>>>
>>>>>If Apple does not resolve all of the issues, I would contact a law firm
>>>>>in Silicon Valley to rite a letter and send it to Apple's legal department.
>>>>>It shouldn't cost that much. In the letter, I would state all the problems,
>>>>>list the case numbers. I would request a refund of the purchase
Re: How is everyone dealing with Serial ATA /PCI /EDS Issues..WorkArounds [message #58676 is a reply to message #58579] Sun, 02 October 2005 07:12 Go to previous message
Chris Ludwig is currently offline  Chris Ludwig   UNITED STATES
Messages: 868
Registered: May 2006
Senior Member
the
> > > cheapest one is 2 GHz which I am assuming means 2GHz x 2 or 4Ghz and
the
> > > most expensive one is 2.4GHz so I'm assuming that this means it's
> possible
> > > of achieving around 5GHz if nudged a little.
> >
> > UADs and TC powercore work great in either setup. The only issue is with
> > the UAD on the AMD64 X2 is you have a firewire audio interface. UAD is
> > already working on this (we sent them a machine).
> >
> > If you want to get something that is gonna the most future proof (if
> > there is such a thing) then the Tyan s2895 with the Opterons would be
> > the best choice. But also the most expensive at the start.
> >
> > The K8NS like all of the Nforce 3 chipset motherboards are on the way to
> > being phased out. The Nforce 4 single CPU board are having performance
> > issues with PCI. They will hopefully be changing this with some chipset
> > changes soon.
> >
> > If your money is tight then the AMD64 X2 single processor will still be
> > the best choice for performance.
> >
> > Best price/performance:
> >
> > AMD Athlon64-
> &
Previous Topic: My new blog
Next Topic: Aaron, anybody if you have any other ideals on cfg missing
Goto Forum:
  


Current Time: Thu May 23 03:10:46 PDT 2024

Total time taken to generate the page: 0.01946 seconds