The PARIS Forums: PARIS: Main

Home » The PARIS Forums » PARIS: Main » paris 101

Show: Today's Messages :: Polls :: Message Navigator

paris 101 [message #69482]

Sun, 18 June 2006 19:13

jp
Messages: 65
Registered: June 2005

Member

help
everything is freezing up
everything is going wrong since i reloaded my software 2.1
....
originally someone helped me
with new cinfig files.

this is what i got now:
dusk i/o = 64
disk cache = 10 mb
prerview = 2048 kb

what do i change so the thing isn't stopping all the time?
thanks
jp

Report message to a moderator

Re: paris 101 [message #69487 is a reply to message #69482]

Mon, 19 June 2006 01:46

Kim
Messages: 1246
Registered: October 2005

Senior Member

So you're getting streaming errors?

Disk I/O should usually be higher rather than lower. Try 128 as a start point.

Personally I have:

Disk I/O =128
Disk Cache = 30 Meg
Overview Cache = 4096

It all depends on your system, how big it is (bigger needs higher numbers).
I have a two card system and those settings work fine for me. Don't remember
the last disk error I had. Maybe none on this system. It's been said that
your disk cache should allow for double the number of tracks that you're
really using.

If you're on a single card system the setting may be ok, maybe... except
I'd up the Disk I/O first to 128.

What is your system? How many cards?

Cheers,
Kim.

"jp" <jpj@jpjones.net> wrote:
>
>help
>everything is freezing up
>everything is going wrong since i reloaded my software 2.1
>...
>originally someone helped me
>with new cinfig files.
>
>this is what i got now:
>dusk i/o = 64
>disk cache = 10 mb
>prerview = 2048 kb
>
>what do i change so the thing isn't stopping all the time?
>thanks
>jp
>

Report message to a moderator

Re: paris 101 [message #69488 is a reply to message #69487]

Mon, 19 June 2006 03:57

John [1]
Messages: 2229
Registered: September 2005

Senior Member

Can you verify that your eds card(s) are on the same IRQ and that they are
NOT sharing with anything else? On boot up you should see what the bios
is putting them on.

In bios turn off parallel, serial, usb ports till you get it figured out.

John

Report message to a moderator

Re: paris 101 [message #69498 is a reply to message #69487]

Mon, 19 June 2006 09:57

jp
Messages: 65
Registered: June 2005

Member

Kim--
thanks--
my system is antiquated-- about eight years old
with one card in a G3. i had similar issues when i
first began working with paris and the default configuration
and someone on this newsgroup, i think chuck duffy, gave me some
suggestions that ultimately cleared up the problem. at this point i'm
very nearly at the end of a lengthy project, ten songs with an average of
12 trks and a whole lot of submixes all of which
need final mixes, and suddenly my computer does not want to comply... a little
scary... the cursor stops midway through the tracks, the music continues
to play, and the only way to stop it is to force quit the program, and then
force the mac to restart.

i'll try your suggestions.
cheers back at ya
jp

"Kim" <hiddensounds@hotmail.com> wrote:
>
>
>So you're getting streaming errors?
>
>Disk I/O should usually be higher rather than lower. Try 128 as a start
point.
>
>Personally I have:
>
>Disk I/O =128
>Disk Cache = 30 Meg
>Overview Cache = 4096
>
>It all depends on your system, how big it is (bigger needs higher numbers).
>I have a two card system and those settings work fine for me. Don't remember
>the last disk error I had. Maybe none on this system. It's been said that
>your disk cache should allow for double the number of tracks that you're
>really using.
>
>If you're on a single card system the setting may be ok, maybe... except
>I'd up the Disk I/O first to 128.
>
>What is your system? How many cards?
>
>Cheers,
>Kim.
>
>"jp" <jpj@jpjones.net> wrote:
>>
>>help
>>everything is freezing up
>>everything is going wrong since i reloaded my software 2.1
>>...
>>originally someone helped me
>>with new cinfig files.
>>
>>this is what i got now:
>>dusk i/o = 64
>>disk cache = 10 mb
>>prerview = 2048 kb
>>
>>what do i change so the thing isn't stopping all the time?
>>thanks
>>jp
>>
>

Report message to a moderator

Re: paris 101 [message #69499 is a reply to message #69488]

Mon, 19 June 2006 09:59

jp
Messages: 65
Registered: June 2005

Member

John--
I doubt that it is an IRQ conflict, since nothing has been changed... if
all else fails i'll surely work with your suggestion...
thanks,
jp

"John" <no@no.com> wrote:
>
>Can you verify that your eds card(s) are on the same IRQ and that they are
>NOT sharing with anything else? On boot up you should see what the bios
>is putting them on.
>
>In bios turn off parallel, serial, usb ports till you get it figured out.
>
>John

Report message to a moderator

Re: paris 101 [message #69501 is a reply to message #69487]

Mon, 19 June 2006 11:10

jp
Messages: 65
Registered: June 2005

Member

I seem to remember there being some issue with the disk cache size of the
G3 itself. Is this correct? system profiler is telling
me that I have 128K in the disk cache at the moment. Should this be changed?
thanks
jp

"Kim" <hiddensounds@hotmail.com> wrote:
>
>
>So you're getting streaming errors?
>
>Disk I/O should usually be higher rather than lower. Try 128 as a start
point.
>
>Personally I have:
>
>Disk I/O =128
>Disk Cache = 30 Meg
>Overview Cache = 4096
>
>It all depends on your system, how big it is (bigger needs higher numbers).
>I have a two card system and those settings work fine for me. Don't remember
>the last disk error I had. Maybe none on this system. It's been said that
>your disk cache should allow for double the number of tracks that you're
>really using.
>
>If you're on a single card system the setting may be ok, maybe... except
>I'd up the Disk I/O first to 128.
>
>What is your system? How many cards?
>
>Cheers,
>Kim.
>
>"jp" <jpj@jpjones.net> wrote:
>>
>>help
>>everything is freezing up
>>everything is going wrong since i reloaded my software 2.1
>>...
>>originally someone helped me
>>with new cinfig files.
>>
>>this is what i got now:
>>dusk i/o = 64
>>disk cache = 10 mb
>>prerview = 2048 kb
>>
>>what do i change so the thing isn't stopping all the time?
>>thanks
>>jp
>>
>

Report message to a moderator

Re: paris 101 [message #69504 is a reply to message #69482]

Mon, 19 June 2006 12:24

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Hey JP! Here is what I recommend you try.

You will need to know how much memory is available for Paris. Do a "about
this Mac" from the Apple menu to see how much memory is available for Paris

Go to the Paris program where ever it's located, and click once on the Paris
icon just to high light it. Do a "get info", Go file> Get info>memory.
Allocate more memory to the Paris program, type in a higher number In the
preferred memory box.

Try reloading the program again.

If that does not work, you may have an Extensions conflict. Check the Paris
Q&A web page to see Mac extension settings. Create an optimized extension
set just for Paris. Or you could just start with the system extensions and
paris extensions. You may have to test different extensions, by adding and
rebooting.

Good luck!

James

"jp" <jpj@jpjones.net> wrote:
>
>help
>everything is freezing up
>everything is going wrong since i reloaded my software 2.1
>...
>originally someone helped me
>with new cinfig files.
>
>this is what i got now:
>dusk i/o = 64
>disk cache = 10 mb
>prerview = 2048 kb
>
>what do i change so the thing isn't stopping all the time?
>thanks
>jp
>

Report message to a moderator

Re: paris 101 [message #69505 is a reply to message #69504]

Mon, 19 June 2006 12:28

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Sorry,

Try giving the program more memory first, then if that doesn't work, then
try reloading the program.

James

"James McCloskey" <excelsm@hotmail.com> wrote:
>
>Hey JP! Here is what I recommend you try.
>
>You will need to know how much memory is available for Paris. Do a "about
>this Mac" from the Apple menu to see how much memory is available for Paris
>
>Go to the Paris program where ever it's located, and click once on the Paris
>icon just to high light it. Do a "get info", Go file> Get info>memory.

>Allocate more memory to the Paris program, type in a higher number In the
>preferred memory box.
>
>Try reloading the program again.
>
>If that does not work, you may have an Extensions conflict. Check the Paris
>Q&A web page to see Mac extension settings. Create an optimized extension
>set just for Paris. Or you could just start with the system extensions
and
>paris extensions. You may have to test different extensions, by adding
and
>rebooting.
>
>
>
>Good luck!
>
>James
>
>
>"jp" <jpj@jpjones.net> wrote:
>>
>>help
>>everything is freezing up
>>everything is going wrong since i reloaded my software 2.1
>>...
>>originally someone helped me
>>with new cinfig files.
>>
>>this is what i got now:
>>dusk i/o = 64
>>disk cache = 10 mb
>>prerview = 2048 kb
>>
>>what do i change so the thing isn't stopping all the time?
>>thanks
>>jp
>>
>

Report message to a moderator

Re: paris 101 [message #69506 is a reply to message #69504]

Mon, 19 June 2006 13:17

jp
Messages: 65
Registered: June 2005

Member

Jim!
hey, it's all coming back to me-- i remember doing this when i first got
paris
years ago. unfortunately i've lost all the initial documentation
i started at the time. your recommendation sounds like the
way to go./

i'll let you know
thanks
jp

"James McCloskey" <excelsm@hotmail.com> wrote:
>
>Hey JP! Here is what I recommend you try.
>
>You will need to know how much memory is available for Paris. Do a "about
>this Mac" from the Apple menu to see how much memory is available for Paris
>
>Go to the Paris program where ever it's located, and click once on the Paris
>icon just to high light it. Do a "get info", Go file> Get info>memory.

>Allocate more memory to the Paris program, type in a higher number In the
>preferred memory box.
>
>Try reloading the program again.
>
>If that does not work, you may have an Extensions conflict. Check the Paris
>Q&A web page to see Mac extension settings. Create an optimized extension
>set just for Paris. Or you could just start with the system extensions
and
>paris extensions. You may have to test different extensions, by adding
and
>rebooting.
>
>
>
>Good luck!
>
>James
>
>
>"jp" <jpj@jpjones.net> wrote:
>>
>>help
>>everything is freezing up
>>everything is going wrong since i reloaded my software 2.1
>>...
>>originally someone helped me
>>with new cinfig files.
>>
>>this is what i got now:
>>dusk i/o = 64
>>disk cache = 10 mb
>>prerview = 2048 kb
>>
>>what do i change so the thing isn't stopping all the time?
>>thanks
>>jp
>>
>

Report message to a moderator

Re: paris 101 [message #69509 is a reply to message #69504]

Mon, 19 June 2006 13:36

jp
Messages: 65
Registered: June 2005

Member

James, thanks!

this seems to be the fix--
more memory allocated to the program.
paris 101 indeed.

do i feel foolish?
:-)
jp

"James McCloskey" <excelsm@hotmail.com> wrote:
>
>Hey JP! Here is what I recommend you try.
>
>You will need to know how much memory is available for Paris. Do a "about
>this Mac" from the Apple menu to see how much memory is available for Paris
>
>Go to the Paris program where ever it's located, and click once on the Paris
>icon just to high light it. Do a "get info", Go file> Get info>memory.

>Allocate more memory to the Paris program, type in a higher number In the
>preferred memory box.
>
>Try reloading the program again.
>
>If that does not work, you may have an Extensions conflict. Check the Paris
>Q&A web page to see Mac extension settings. Create an optimized extension
>set just for Paris. Or you could just start with the system extensions
and
>paris extensions. You may have to test different extensions, by adding
and
>rebooting.
>
>
>
>Good luck!
>
>James
>
>
>"jp" <jpj@jpjones.net> wrote:
>>
>>help
>>everything is freezing up
>>everything is going wrong since i reloaded my software 2.1
>>...
>>originally someone helped me
>>with new cinfig files.
>>
>>this is what i got now:
>>dusk i/o = 64
>>disk cache = 10 mb
>>prerview = 2048 kb
>>
>>what do i change so the thing isn't stopping all the time?
>>thanks
>>jp
>>
>

Report message to a moderator

Re: paris 101 [message #69521 is a reply to message #69509]

Mon, 19 June 2006 15:36

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Don't feel foolish, this is the number one reason people think Macs crash.
It's because they do, if you don't give the programs enough memory. Everybody
forgets this. Me included.

James

"jp" <jpj@jpjones.net> wrote:
>
>James, thanks!
>
>this seems to be the fix--
>more memory allocated to the program.
>paris 101 indeed.
>
>do i feel foolish?
>:-)
>jp
>
>"James McCloskey" <excelsm@hotmail.com> wrote:
>>
>>Hey JP! Here is what I recommend you try.
>>
>>You will need to know how much memory is available for Paris. Do a "about
>>this Mac" from the Apple menu to see how much memory is available for Paris
>>
>>Go to the Paris program where ever it's located, and click once on the
Paris
>>icon just to high light it. Do a "get info", Go file> Get info>memory.
>
>>Allocate more memory to the Paris program, type in a higher number In the
>>preferred memory box.
>>
>>Try reloading the program again.
>>
>>If that does not work, you may have an Extensions conflict. Check the
Paris
>>Q&A web page to see Mac extension settings. Create an optimized extension
>>set just for Paris. Or you could just start with the system extensions
>and
>>paris extensions. You may have to test different extensions, by adding
>and
>>rebooting.
>>
>>
>>
>>Good luck!
>>
>>James
>>
>>
>>"jp" <jpj@jpjones.net> wrote:
>>>
>>>help
>>>everything is freezing up
>>>everything is going wrong since i reloaded my software 2.1
>>>...
>>>originally someone helped me
>>>with new cinfig files.
>>>
>>>this is what i got now:
>>>dusk i/o = 64
>>>disk cache = 10 mb
>>>prerview = 2048 kb
>>>
>>>what do i change so the thing isn't stopping all the time?
>>>thanks
>>>jp
>>>
>>
>

Report message to a moderator

Re: paris 101 [message #69522 is a reply to message #69482]

Mon, 19 June 2006 16:20

Mark McDermott

Messages: 204
Registered: February 2006
Location: Portland, OR

Senior Member

JP,

Here's a link to some info I provided on OS 9 configuration a while back.
I think it should help you out.

Feel free to contact me if you have any questions!

Mark

http://news.parisnewsgroup.com/cgi-bin/dnewsweb?cmd=article& amp;group=IDEA.EMUEnsoniqPARIS&item=176119&utag=

"jp" <jpj@jpjones.net> wrote:
>
>help
>everything is freezing up
>everything is going wrong since i reloaded my software 2.1
>...
>originally someone helped me
>with new cinfig files.
>
>this is what i got now:
>dusk i/o = 64
>disk cache = 10 mb
>prerview = 2048 kb
>
>what do i change so the thing isn't stopping all the time?
>thanks
>jp
>

Report message to a moderator

Previous Topic:	Wrapping VST plug-ins
Next Topic:	Paris + Windows Vista

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun May 12 04:56:17 PDT 2024

Total time taken to generate the page: 0.03165 seconds