Tip to have outboard reverb on all mecs (442's) ! [message #78472] |
Tue, 16 January 2007 09:06 |
Dimitrios
Messages: 1056 Registered: August 2005
|
Senior Member |
|
|
http://www.thomann.de/gb/behringer_micromix_mx400.htm
This is the device I once posted about here.
With these devices one for each MEC or 442 you can mix your mecs aux outs
to one out for a single hardware reverb.
For instance I have three mecs and so with three of those I mix one output
from each mec (to three inputs of this MX400) to the left input of a LXP1.
The out of the LXP1 can be inserted on one mec.
If you want stereo you need six of those if you have three mecs (up to four
mecs or 442's).
They are dead cheap at www.thomann.de
Around 20 $ each.
Hope this helps.
Regards,
Dimitrios
|
|
|