The PARIS Forums


Home » The PARIS Forums » PARIS: Main » It's stranger than fiction around here sometimes
It's stranger than fiction around here sometimes [message #81309] Thu, 08 March 2007 12:19 Go to next message
Deej [4] is currently offline  Deej [4]   UNITED STATES
Messages: 1292
Registered: January 2007
Senior Member
Well, my Lexicon PCM 91 quit passing signal reliably last night. After
troubleshooting it, my RME ADI-DD, my harness from the ADI4-DD to the
outboard processors and putting in calls to Morgan, CBI and Synthax, I found
the problem. The WC cable that was feeding the ADI8-DD from the GenX-6 that
is distributing WC from my Mytek clock was full of punctures. Either there's
bad studiocat behaviour going on or a bad mouse or other vermin that the bad
studiocat should be attending to. This is, by far, one of the wierdest
studio occurrences I've had yet. This was a very expensive Zaolla 75 ohm WC
cable and I would have definitely noticed if it would have been punctured
prior to my installing it.

;oP
Re: It's stranger than fiction around here sometimes [message #81320 is a reply to message #81309] Thu, 08 March 2007 16:28 Go to previous messageGo to next message
John [1] is currently offline  John [1]
Messages: 2229
Registered: September 2005
Senior Member
This means your setup is still to complicated. Sell half and see how it works.
Rinse and repeat. hehe
Re: It's stranger than fiction around here sometimes [message #81327 is a reply to message #81309] Fri, 09 March 2007 01:55 Go to previous messageGo to next message
rick is currently offline  rick   UNITED STATES
Messages: 1976
Registered: February 2006
Senior Member
try having ghosts...and i'm not the only one who sees the shadows
moving about.

On Thu, 8 Mar 2007 13:19:13 -0700, "DJ" <www.aarrrrggghhh!!!.com>
wrote:

>Well, my Lexicon PCM 91 quit passing signal reliably last night. After
>troubleshooting it, my RME ADI-DD, my harness from the ADI4-DD to the
>outboard processors and putting in calls to Morgan, CBI and Synthax, I found
>the problem. The WC cable that was feeding the ADI8-DD from the GenX-6 that
>is distributing WC from my Mytek clock was full of punctures. Either there's
>bad studiocat behaviour going on or a bad mouse or other vermin that the bad
>studiocat should be attending to. This is, by far, one of the wierdest
>studio occurrences I've had yet. This was a very expensive Zaolla 75 ohm WC
>cable and I would have definitely noticed if it would have been punctured
>prior to my installing it.
>
>;oP
>
>
Re: It's stranger than fiction around here sometimes [message #81328 is a reply to message #81327] Fri, 09 March 2007 05:07 Go to previous messageGo to next message
John [1] is currently offline  John [1]
Messages: 2229
Registered: September 2005
Senior Member
Just play the Zeppelin Immigrant's Song from Zep3 at 105 db. Ghost hate that
and leave permanently.

Ah, ah,
We come from the land of the ice and snow,
from the midnight sun where the hot springs blow.
The hammer of the gods
Will drive our ships to new lands,
To fight the horde, singing and crying:
Valhalla, I am coming!
On we sweep with threshing oar,
Our only goal will be the western shore.
Ah, ah,
We come from the land of the ice and snow,
from the midnight sun where the hot springs blow.
How soft your fields so green,
Can whisper tales of gore,
Of how we calmed the tides of war.
We are your overlords.
On we sweep with threshing oar,
Our only goal will be the western shore.
So now youd better stop and rebuild all your ruins,
For peace and trust can win the day
Despite of all your losing.
Re: It's stranger than fiction around here sometimes [message #81332 is a reply to message #81328] Fri, 09 March 2007 10:10 Go to previous messageGo to next message
excelav is currently offline  excelav   
Messages: 2130
Registered: July 2005
Location: Metro Detroit
Senior Member
Yeah, they hate Britney Spears Too!

"John" <no@no.com> wrote:
>
>Just play the Zeppelin Immigrant's Song from Zep3 at 105 db. Ghost hate
that
>and leave permanently.
>
>Ah, ah,
>We come from the land of the ice and snow,
>from the midnight sun where the hot springs blow.
>The hammer of the gods
>Will drive our ships to new lands,
>To fight the horde, singing and crying:
>Valhalla, I am coming!
>On we sweep with threshing oar,
>Our only goal will be the western shore.
>Ah, ah,
>We come from the land of the ice and snow,
>from the midnight sun where the hot springs blow.
>How soft your fields so green,
>Can whisper tales of gore,
>Of how we calmed the tides of war.
>We are your overlords.
>On we sweep with threshing oar,
>Our only goal will be the western shore.
>So now youd better stop and rebuild all your ruins,
>For peace and trust can win the day
>Despite of all your losing.
>
>
Re: It's stranger than fiction around here sometimes [message #81336 is a reply to message #81328] Fri, 09 March 2007 09:45 Go to previous messageGo to next message
rick is currently offline  rick   UNITED STATES
Messages: 1976
Registered: February 2006
Senior Member
if they can deal with some of the bands that come though here then
that ain't nuthin'

On 9 Mar 2007 23:07:57 +1000, "John" <no@no.com> wrote:

>
>Just play the Zeppelin Immigrant's Song from Zep3 at 105 db. Ghost hate that
>and leave permanently.
>
>Ah, ah,
>We come from the land of the ice and snow,
>from the midnight sun where the hot springs blow.
>The hammer of the gods
>Will drive our ships to new lands,
>To fight the horde, singing and crying:
>Valhalla, I am coming!
>On we sweep with threshing oar,
>Our only goal will be the western shore.
>Ah, ah,
>We come from the land of the ice and snow,
>from the midnight sun where the hot springs blow.
>How soft your fields so green,
>Can whisper tales of gore,
>Of how we calmed the tides of war.
>We are your overlords.
>On we sweep with threshing oar,
>Our only goal will be the western shore.
>So now youd better stop and rebuild all your ruins,
>For peace and trust can win the day
>Despite of all your losing.
>
Re: It's stranger than fiction around here sometimes [message #81339 is a reply to message #81309] Fri, 09 March 2007 15:21 Go to previous messageGo to next message
Sarah is currently offline  Sarah   UNITED STATES
Messages: 608
Registered: February 2007
Senior Member
Is it bad that I have no idea what you're talking about? :)

Sarah


"DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45f06fde$1@linux...
> Well, my Lexicon PCM 91 quit passing signal reliably last night. After
> troubleshooting it, my RME ADI-DD, my harness from the ADI4-DD to the
> outboard processors and putting in calls to Morgan, CBI and Synthax, I
> found the problem. The WC cable that was feeding the ADI8-DD from the
> GenX-6 that is distributing WC from my Mytek clock was full of punctures.
> Either there's bad studiocat behaviour going on or a bad mouse or other
> vermin that the bad studiocat should be attending to. This is, by far, one
> of the wierdest studio occurrences I've had yet. This was a very expensive
> Zaolla 75 ohm WC cable and I would have definitely noticed if it would
> have been punctured prior to my installing it.
>
> ;oP
>
>
>
Re: It's stranger than fiction around here sometimes [message #81341 is a reply to message #81339] Fri, 09 March 2007 18:01 Go to previous messageGo to next message
Deej [4] is currently offline  Deej [4]   UNITED STATES
Messages: 1292
Registered: January 2007
Senior Member
Ok......hmmmm......letsee..........

PCM 91 = outboard reverb processor

RME ADI4-DD=ADAT to AES format converter which allows 4 x devices with AES
inputs and outputs to interface with the optical ports on an audio card

harness=the cabling that attaches the AES devices to the RME ADI4-DD

GENX-6=module that takes a word clock signal from another device, spiits it
6 ways and then feeds it to six different devices

Zaolla 75ohm WC cable=a pretty darned expensive piece of silver wire covered
with rubber and having BNC connectors on either end to connect to other
devices with similar connectors.

bad studiocat=little grey horror who likes to leave the carcasses of dead
rodents in my chair as a present upon occasion.

hmmm.....not sure if this is clear even now after looking at it.

;o)



"Sarah" <sarahjane@sarahtonin.com> wrote in message news:45f1ec0b@linux...
> Is it bad that I have no idea what you're talking about? :)
>
> Sarah
>
>
> "DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45f06fde$1@linux...
>> Well, my Lexicon PCM 91 quit passing signal reliably last night. After
>> troubleshooting it, my RME ADI-DD, my harness from the ADI4-DD to the
>> outboard processors and putting in calls to Morgan, CBI and Synthax, I
>> found the problem. The WC cable that was feeding the ADI8-DD from the
>> GenX-6 that is distributing WC from my Mytek clock was full of punctures.
>> Either there's bad studiocat behaviour going on or a bad mouse or other
>> vermin that the bad studiocat should be attending to. This is, by far,
>> one of the wierdest studio occurrences I've had yet. This was a very
>> expensive Zaolla 75 ohm WC cable and I would have definitely noticed if
>> it would have been punctured prior to my installing it.
>>
>> ;oP
>>
>>
>>
>
>
Re: It's stranger than fiction around here sometimes [message #81355 is a reply to message #81341] Fri, 09 March 2007 23:39 Go to previous messageGo to next message
Sarah is currently offline  Sarah   UNITED STATES
Messages: 608
Registered: February 2007
Senior Member
Uh yeah, thanks for clearing that up. :)

Sarah

PS: Does your bad studiocat leave the rodents in good condition, aside from
being dead? My cat leaves them on my front doormat looking completely
undamaged. I think she just plays with them til they die of fright. I
thought about saving them last winter and making an all mouse nativity
scene, or maybe mouse Santa and reindeer.

"DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45f21179$1@linux...
> Ok......hmmmm......letsee..........
>
> PCM 91 = outboard reverb processor
>
> RME ADI4-DD=ADAT to AES format converter which allows 4 x devices with AES
> inputs and outputs to interface with the optical ports on an audio card
>
> harness=the cabling that attaches the AES devices to the RME ADI4-DD
>
> GENX-6=module that takes a word clock signal from another device, spiits
> it 6 ways and then feeds it to six different devices
>
> Zaolla 75ohm WC cable=a pretty darned expensive piece of silver wire
> covered with rubber and having BNC connectors on either end to connect to
> other devices with similar connectors.
>
> bad studiocat=little grey horror who likes to leave the carcasses of dead
> rodents in my chair as a present upon occasion.
>
> hmmm.....not sure if this is clear even now after looking at it.
>
> ;o)
>
>
>
> "Sarah" <sarahjane@sarahtonin.com> wrote in message news:45f1ec0b@linux...
>> Is it bad that I have no idea what you're talking about? :)
>>
>> Sarah
>>
>>
>> "DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45f06fde$1@linux...
>>> Well, my Lexicon PCM 91 quit passing signal reliably last night. After
>>> troubleshooting it, my RME ADI-DD, my harness from the ADI4-DD to the
>>> outboard processors and putting in calls to Morgan, CBI and Synthax, I
>>> found the problem. The WC cable that was feeding the ADI8-DD from the
>>> GenX-6 that is distributing WC from my Mytek clock was full of
>>> punctures. Either there's bad studiocat behaviour going on or a bad
>>> mouse or other vermin that the bad studiocat should be attending to.
>>> This is, by far, one of the wierdest studio occurrences I've had yet.
>>> This was a very expensive Zaolla 75 ohm WC cable and I would have
>>> definitely noticed if it would have been punctured prior to my
>>> installing it.
>>>
>>> ;oP
>>>
>>>
>>>
>>
>>
>
>
Re: It's stranger than fiction around here sometimes [message #81360 is a reply to message #81355] Sat, 10 March 2007 03:50 Go to previous messageGo to next message
rick is currently offline  rick   UNITED STATES
Messages: 1976
Registered: February 2006
Senior Member
ours just ate the heads...kinda weird. then a cayote came and invited
her to lunch. she must have liked what they were serving as she never
came back.


On Fri, 9 Mar 2007 23:39:21 -0800, "Sarah" <sarahjane@sarahtonin.com>
wrote:

>Uh yeah, thanks for clearing that up. :)
>
>Sarah
>
>PS: Does your bad studiocat leave the rodents in good condition, aside from
>being dead? My cat leaves them on my front doormat looking completely
>undamaged. I think she just plays with them til they die of fright. I
>thought about saving them last winter and making an all mouse nativity
>scene, or maybe mouse Santa and reindeer.
>
>"DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45f21179$1@linux...
>> Ok......hmmmm......letsee..........
>>
>> PCM 91 = outboard reverb processor
>>
>> RME ADI4-DD=ADAT to AES format converter which allows 4 x devices with AES
>> inputs and outputs to interface with the optical ports on an audio card
>>
>> harness=the cabling that attaches the AES devices to the RME ADI4-DD
>>
>> GENX-6=module that takes a word clock signal from another device, spiits
>> it 6 ways and then feeds it to six different devices
>>
>> Zaolla 75ohm WC cable=a pretty darned expensive piece of silver wire
>> covered with rubber and having BNC connectors on either end to connect to
>> other devices with similar connectors.
>>
>> bad studiocat=little grey horror who likes to leave the carcasses of dead
>> rodents in my chair as a present upon occasion.
>>
>> hmmm.....not sure if this is clear even now after looking at it.
>>
>> ;o)
>>
>>
>>
>> "Sarah" <sarahjane@sarahtonin.com> wrote in message news:45f1ec0b@linux...
>>> Is it bad that I have no idea what you're talking about? :)
>>>
>>> Sarah
>>>
>>>
>>> "DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45f06fde$1@linux...
>>>> Well, my Lexicon PCM 91 quit passing signal reliably last night. After
>>>> troubleshooting it, my RME ADI-DD, my harness from the ADI4-DD to the
>>>> outboard processors and putting in calls to Morgan, CBI and Synthax, I
>>>> found the problem. The WC cable that was feeding the ADI8-DD from the
>>>> GenX-6 that is distributing WC from my Mytek clock was full of
>>>> punctures. Either there's bad studiocat behaviour going on or a bad
>>>> mouse or other vermin that the bad studiocat should be attending to.
>>>> This is, by far, one of the wierdest studio occurrences I've had yet.
>>>> This was a very expensive Zaolla 75 ohm WC cable and I would have
>>>> definitely noticed if it would have been punctured prior to my
>>>> installing it.
>>>>
>>>> ;oP
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
Re: It's stranger than fiction around here sometimes [message #81364 is a reply to message #81309] Sat, 10 March 2007 04:33 Go to previous messageGo to next message
Bill Lorentzen is currently offline  Bill Lorentzen   UNITED STATES
Messages: 140
Registered: June 2005
Senior Member
My old cat would go right under the console and start biting my cables when
she was pissed at me.


"DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45f06fde$1@linux...
> Well, my Lexicon PCM 91 quit passing signal reliably last night. After
> troubleshooting it, my RME ADI-DD, my harness from the ADI4-DD to the
> outboard processors and putting in calls to Morgan, CBI and Synthax, I
> found the problem. The WC cable that was feeding the ADI8-DD from the
> GenX-6 that is distributing WC from my Mytek clock was full of punctures.
> Either there's bad studiocat behaviour going on or a bad mouse or other
> vermin that the bad studiocat should be attending to. This is, by far, one
> of the wierdest studio occurrences I've had yet. This was a very expensive
> Zaolla 75 ohm WC cable and I would have definitely noticed if it would
> have been punctured prior to my installing it.
>
> ;oP
>
>
>
Re: It's stranger than fiction around here sometimes [message #81378 is a reply to message #81364] Sat, 10 March 2007 11:12 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_00BC_01C7631E.20C1F7E0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hence the term "old" cat.


"Bill Lorentzen" <bill@lorentzen.ws> wrote in message =
news:45f2a57c@linux...
My old cat would go right under the console and start biting my cables =
when=20
she was pissed at me.


"DJ" <www.aarrrrggghhh!!!.com> wrote in message =
news:45f06fde$1@linux...
> Well, my Lexicon PCM 91 quit passing signal reliably last night. =
After=20
> troubleshooting it, my RME ADI-DD, my harness from the ADI4-DD to =
the=20
> outboard processors and putting in calls to Morgan, CBI and Synthax, =
I=20
> found the problem. The WC cable that was feeding the ADI8-DD from =
the=20
> GenX-6 that is distributing WC from my Mytek clock was full of =
punctures.=20
> Either there's bad studiocat behaviour going on or a bad mouse or =
other=20
> vermin that the bad studiocat should be attending to. This is, by =
far, one=20
> of the wierdest studio occurrences I've had yet. This was a very =
expensive=20
> Zaolla 75 ohm WC cable and I would have definitely noticed if it =
would=20
> have been punctured prior to my installing it.
>
> ;oP
>
>
>=20




I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_00BC_01C7631E.20C1F7E0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hence the term "old" cat.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV>&nbsp;</DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Bill Lorentzen" &lt;<A=20
href=3D"mailto:bill@lorentzen.ws">bill@lorentzen.ws</A>&gt; wrote in =
message <A=20
href=3D"news:45f2a57c@linux">news:45f2a57c@linux</A>...</DIV>My old =
cat would go=20
right under the console and start biting my cables when <BR>she was =
pissed at=20
me.<BR><BR><BR>"DJ" &lt;<A=20
=
href=3D"http://www.aarrrrggghhh!!!.com">www.aarrrrggghhh!!!.com</A>&gt; =
wrote in=20
message <A =
href=3D"news:45f06fde$1@linux">news:45f06fde$1@linux</A>...<BR>&gt;=20
Well, my Lexicon PCM 91 quit passing signal reliably last night. After =

<BR>&gt; troubleshooting it, my RME ADI-DD, my harness from the =
ADI4-DD to the=20
<BR>&gt; outboard processors and putting in calls to Morgan, CBI and =
Synthax,=20
I <BR>&gt; found the problem. The WC cable that was feeding the =
ADI8-DD from=20
the <BR>&gt; GenX-6 that is distributing WC from my Mytek clock was =
full of=20
punctures. <BR>&gt; Either there's bad studiocat behaviour going on or =
a bad=20
mouse or other <BR>&gt; vermin that the bad studiocat should be =
attending to.=20
This is, by far, one <BR>&gt; of the wierdest studio occurrences I've =
had yet.=20
This was a very expensive <BR>&gt; Zaolla 75 ohm WC cable and I would =
have=20
definitely noticed if it would <BR>&gt; have been punctured prior to =
my=20
installing it.<BR>&gt;<BR>&gt; ;oP<BR>&gt;<BR>&gt;<BR>&gt; =
<BR><BR></BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>&nbsp;&nbsp;&nbsp;</FONT></DIV></BODY ></HTML>

------=_NextPart_000_00BC_01C7631E.20C1F7E0--
Re: It's stranger than fiction around here sometimes [message #81379 is a reply to message #81355] Sat, 10 March 2007 12:19 Go to previous message
Deej [4] is currently offline  Deej [4]   UNITED STATES
Messages: 1292
Registered: January 2007
Senior Member
bad studio cat is messy........bits and pieces everywhere.....plus hairballs
and other regurtgitated stuff. She's of the opinion that whatever is offered
should be equally appreciated........because she's a cat.

;o)

"Sarah" <sarahjane@sarahtonin.com> wrote in message news:45f260c2@linux...
> Uh yeah, thanks for clearing that up. :)
>
> Sarah
>
> PS: Does your bad studiocat leave the rodents in good condition, aside
> from being dead? My cat leaves them on my front doormat looking
> completely undamaged. I think she just plays with them til they die of
> fright. I thought about saving them last winter and making an all mouse
> nativity scene, or maybe mouse Santa and reindeer.
>
> "DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45f21179$1@linux...
>> Ok......hmmmm......letsee..........
>>
>> PCM 91 = outboard reverb processor
>>
>> RME ADI4-DD=ADAT to AES format converter which allows 4 x devices with
>> AES inputs and outputs to interface with the optical ports on an audio
>> card
>>
>> harness=the cabling that attaches the AES devices to the RME ADI4-DD
>>
>> GENX-6=module that takes a word clock signal from another device, spiits
>> it 6 ways and then feeds it to six different devices
>>
>> Zaolla 75ohm WC cable=a pretty darned expensive piece of silver wire
>> covered with rubber and having BNC connectors on either end to connect to
>> other devices with similar connectors.
>>
>> bad studiocat=little grey horror who likes to leave the carcasses of dead
>> rodents in my chair as a present upon occasion.
>>
>> hmmm.....not sure if this is clear even now after looking at it.
>>
>> ;o)
>>
>>
>>
>> "Sarah" <sarahjane@sarahtonin.com> wrote in message
>> news:45f1ec0b@linux...
>>> Is it bad that I have no idea what you're talking about? :)
>>>
>>> Sarah
>>>
>>>
>>> "DJ" <www.aarrrrggghhh!!!.com> wrote in message news:45f06fde$1@linux...
>>>> Well, my Lexicon PCM 91 quit passing signal reliably last night. After
>>>> troubleshooting it, my RME ADI-DD, my harness from the ADI4-DD to the
>>>> outboard processors and putting in calls to Morgan, CBI and Synthax, I
>>>> found the problem. The WC cable that was feeding the ADI8-DD from the
>>>> GenX-6 that is distributing WC from my Mytek clock was full of
>>>> punctures. Either there's bad studiocat behaviour going on or a bad
>>>> mouse or other vermin that the bad studiocat should be attending to.
>>>> This is, by far, one of the wierdest studio occurrences I've had yet.
>>>> This was a very expensive Zaolla 75 ohm WC cable and I would have
>>>> definitely noticed if it would have been punctured prior to my
>>>> installing it.
>>>>
>>>> ;oP
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
Previous Topic: ADK is giving away a computer recording system. Those guys are nuts!
Next Topic: OT Toshiba laptop gone belly up
Goto Forum:
  


Current Time: Sun May 05 12:50:27 PDT 2024

Total time taken to generate the page: 0.01576 seconds