The PARIS Forums: PARIS: Main » Raid 0 worth it for streaming audio/samples?

Home » The PARIS Forums » PARIS: Main » Raid 0 worth it for streaming audio/samples?

Show: Today's Messages :: Polls :: Message Navigator

Raid 0 worth it for streaming audio/samples? [message #92079]

Sat, 27 October 2007 16:48

Mic Cross
Messages: 30
Registered: June 2005

Member

Getting delayed write to disk errors again on my Tyan S2885 Raid 0 drives,
which after googling seems to be a large drive/Raid/Win problem when drives
get over 3/4 full. Still trying to resolve after 3 days and nights :-(
The question: does Raid 0 give that much benefit when streaming audio
tracks from disk and DFD VSTIs like Ivory? TIA,

Mic.

Report message to a moderator

Re: Raid 0 worth it for streaming audio/samples? [message #92098 is a reply to message #92079]

Sun, 28 October 2007 07:40

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

HI Mic,
I tend to have better and more reliable results using non raid drives
and just spreading the libraries over the drives.
In general Raid will give you more throughput but will not give you
faster access time, in some cases it will increase it.
Chris

Mic Cross wrote:
> Getting delayed write to disk errors again on my Tyan S2885 Raid 0 drives,
> which after googling seems to be a large drive/Raid/Win problem when drives
> get over 3/4 full. Still trying to resolve after 3 days and nights :-(
> The question: does Raid 0 give that much benefit when streaming audio
> tracks from disk and DFD VSTIs like Ivory? TIA,
>
> Mic.
>
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762

Report message to a moderator

Re: Raid 0 worth it for streaming audio/samples? [message #92112 is a reply to message #92098]

Sun, 28 October 2007 20:19

Mic Cross
Messages: 30
Registered: June 2005

Member

Thanks Chris!

Chris Ludwig <chrisl@adkproaudio.com> wrote:
>HI Mic,
>I tend to have better and more reliable results using non raid drives
>and just spreading the libraries over the drives.
>In general Raid will give you more throughput but will not give you
>faster access time, in some cases it will increase it.
>Chris
>
>
>Mic Cross wrote:
>> Getting delayed write to disk errors again on my Tyan S2885 Raid 0 drives,
>> which after googling seems to be a large drive/Raid/Win problem when drives
>> get over 3/4 full. Still trying to resolve after 3 days and nights :-(
>> The question: does Raid 0 give that much benefit when streaming audio
>> tracks from disk and DFD VSTIs like Ivory? TIA,
>>
>> Mic.
>>
>>
>
>--
>Chris Ludwig
>ADK
>chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>www.adkproaudio.com <http://www.adkproaudio.com/>
>(859) 635-5762

Report message to a moderator

Re: Raid 0 worth it for streaming audio/samples? [message #92124 is a reply to message #92079]

Mon, 29 October 2007 15:18

TCB
Messages: 1261
Registered: July 2007

Senior Member

I think striped RAID is overkill in these situations, almost universally.
Also, if you're using a hardware RAID card (a real one, like a 3Ware) that's
one thing, but if you're having windows us the LVM to set up the RAID I think
your software overhead will far outweigh any performance benefit.

In my experience the only RAID cards worth running are the really expensive
ones with real hardware on the board to do the read/write/parity work. Unless
you're dealing with a low performance situation like a RAID 5 file server,
in which case software RAID can work fine. But if you really want top end
disk performance you have to pony up for the good stuff.

TCB

"Mic Cross" <crzymnmchl@comcast.net> wrote:
>
>Getting delayed write to disk errors again on my Tyan S2885 Raid 0 drives,
>which after googling seems to be a large drive/Raid/Win problem when drives
>get over 3/4 full. Still trying to resolve after 3 days and nights :-(
> The question: does Raid 0 give that much benefit when streaming audio
>tracks from disk and DFD VSTIs like Ivory? TIA,
>
>Mic.
>

Report message to a moderator

Re: Raid 0 worth it for streaming audio/samples? [message #92252 is a reply to message #92124]

Thu, 01 November 2007 18:14

Mic Cross
Messages: 30
Registered: June 2005

Member

This is the built-in SI raid on the Tyan S2885 m/b. Am using built-in Promise
on another couple of machines - all have same freakin' problem ... Raid 0
gets 3/4/ full = "write delayed error" messages out of Wincrap ... googled
it and MS have all kind of suggestions of how to patch this problem .. happens
on large drives - Raid is prone - so am in process of unraiding everything.
Taa for the info,

Mic.

"TCB" <nobody@ishere.com> wrote:
>
>I think striped RAID is overkill in these situations, almost universally.
>Also, if you're using a hardware RAID card (a real one, like a 3Ware) that's
>one thing, but if you're having windows us the LVM to set up the RAID I
think
>your software overhead will far outweigh any performance benefit.
>
>In my experience the only RAID cards worth running are the really expensive
>ones with real hardware on the board to do the read/write/parity work. Unless
>you're dealing with a low performance situation like a RAID 5 file server,
>in which case software RAID can work fine. But if you really want top end
>disk performance you have to pony up for the good stuff.
>
>TCB
>
>"Mic Cross" <crzymnmchl@comcast.net> wrote:
>>
>>Getting delayed write to disk errors again on my Tyan S2885 Raid 0 drives,
>>which after googling seems to be a large drive/Raid/Win problem when drives
>>get over 3/4 full. Still trying to resolve after 3 days and nights :-(
>> The question: does Raid 0 give that much benefit when streaming audio
>>tracks from disk and DFD VSTIs like Ivory? TIA,
>>
>>Mic.
>>
>

Report message to a moderator

Previous Topic:	vst path
Next Topic:	Can't judge a book by its' cover....

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon May 13 16:27:42 PDT 2024

Total time taken to generate the page: 0.00880 seconds