Home » The PARIS Forums » PARIS: Main » Cubase Scope card clocking issue. David, Aaron or Dimitrios ?
| Cubase Scope card clocking issue. David, Aaron or Dimitrios ? [message #93179] |
Thu, 29 November 2007 12:25  |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0065_01C8329C.032AE950
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi guys,
I finally have Paris back up and running with Mecs and all.
Now Cubase SX 2.1 doesn't like running because of clocking issues.
I am using a Scope Pro card. Cubase will no longer start up
without Scope running! That's backwards from what was working=20
in the past. Now with both running it's a clickfest along with the=20
inevitable crash as the two are fighting for the hardware resources. =20
With Scope off Cubase gives the white screen of death at start up =
looking for clock.
With Scope off I used to send Paris (XP) ADAT optical to and from 16 =
channels of=20
Scope ADAT. Using Scope card settings at 'Sync/ADAT'. Now, whenever I =
set it=20
to that it doesn't retain the settings and goes back to 'Master/SPDIF'
whether it's plugged into Paris ADAT/SPDIF or not. I've also tried =
another
ADAT machine as the source which had been working while my Mecs were =
down.
That doesn't work either.
What am I missing here?
Thanks,
Tom
=20
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0065_01C8329C.032AE950
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi guys,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I finally have Paris back up and =
running with Mecs=20
and all.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Now Cubase SX 2.1 doesn't like running =
because of=20
clocking issues.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am using a Scope Pro card. =
Cubase will no=20
longer start up</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>without Scope running! That's =
backwards from=20
what was working </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>in the past. </FONT><FONT face=3DArial =
size=3D2>Now=20
with both running it's a clickfest along with the </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>inevitable crash </FONT><FONT =
face=3DArial size=3D2>as=20
the two are fighting for the hardware resources. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>With Scope off Cubase gives the white =
screen of=20
death at start up looking for clock.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>With Scope off I used to send =
</FONT><FONT=20
face=3DArial size=3D2>Paris (XP) ADAT optical to and from 16 channels of =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Scope ADAT. </FONT><FONT =
face=3DArial=20
size=3D2>Using Scope card settings at 'Sync/ADAT'. =
Now,=20
whenever I set it </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>to that it doesn't retain the settings =
and goes=20
back to 'Master/SPDIF'</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>whether it's plugged into Paris =
ADAT/SPDIF or=20
not. I've also tried another</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>ADAT machine as the source which had =
been working=20
while my Mecs were down.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>That doesn't work either.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>What am I missing here?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2> </FONT> </DIV>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BODY ></HTML>
------=_NextPart_000_0065_01C8329C.032AE950--
|
|
|
|
| Re: Cubase Scope card clocking issue. David, Aaron or Dimitrios ? [message #93182 is a reply to message #93179] |
Thu, 29 November 2007 15:12  |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_0085_01C832B3.62BE69C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Got it. The changes can be made with in Cubase. Didn't find that
the last time through this. I had been going to Scope to change =
settings.
Anyway with some switching and three reboots we are back on track.
No clicks or pops and all ins/outs are working.
Thanks for making me think.
Tom
"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:474f20bb$1@linux...
Hi guys,
I finally have Paris back up and running with Mecs and all.
Now Cubase SX 2.1 doesn't like running because of clocking issues.
I am using a Scope Pro card. Cubase will no longer start up
without Scope running! That's backwards from what was working=20
in the past. Now with both running it's a clickfest along with the=20
inevitable crash as the two are fighting for the hardware resources. =20
With Scope off Cubase gives the white screen of death at start up =
looking for clock.
With Scope off I used to send Paris (XP) ADAT optical to and from 16 =
channels of=20
Scope ADAT. Using Scope card settings at 'Sync/ADAT'. Now, whenever =
I set it=20
to that it doesn't retain the settings and goes back to 'Master/SPDIF'
whether it's plugged into Paris ADAT/SPDIF or not. I've also tried =
another
ADAT machine as the source which had been working while my Mecs were =
down.
That doesn't work either.
What am I missing here?
Thanks,
Tom
=20
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0085_01C832B3.62BE69C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Got it. The changes can be made =
with in=20
Cubase. Didn't find that</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>the last time through this. I had =
been going=20
to Scope to change settings.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Anyway with some switching and three =
reboots=20
</FONT><FONT face=3DArial size=3D2>we are back on track.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>No clicks or pops and all ins/outs are=20
working.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for making me =
think.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote =
in message=20
<A href=3D"news:474f20bb$1@linux">news:474f20bb$1@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Hi guys,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I finally have Paris back up and =
running with=20
Mecs and all.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Now Cubase SX 2.1 doesn't like =
running because of=20
clocking issues.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am using a Scope Pro card. =
Cubase will no=20
longer start up</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>without Scope running! That's =
backwards=20
from what was working </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>in the past. </FONT><FONT =
face=3DArial size=3D2>Now=20
with both running it's a clickfest along with the </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>inevitable crash </FONT><FONT =
face=3DArial=20
size=3D2>as the two are fighting for the hardware resources. =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>With Scope off Cubase gives the white =
screen of=20
death at start up looking for clock.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>With Scope off I used to send =
</FONT><FONT=20
face=3DArial size=3D2>Paris (XP) ADAT optical to and from 16 channels =
of=20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Scope ADAT. </FONT><FONT =
face=3DArial=20
size=3D2>Using Scope card =
settings at 'Sync/ADAT'. Now,=20
whenever I set it </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>to that it doesn't retain the =
settings and goes=20
back to 'Master/SPDIF'</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>whether it's plugged into Paris =
ADAT/SPDIF or=20
not. I've also tried another</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>ADAT machine as the source which had =
been working=20
while my Mecs were down.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>That doesn't work =
either.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>What am I missing here?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2> </FONT> </DIV>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> </FONT></DIV></BLOCKQUOTE ></BODY></HTML>
------=_NextPart_000_0085_01C832B3.62BE69C0--
|
|
|
|
| Re: Cubase Scope card clocking issue. David, Aaron or Dimitrios ? [message #93184 is a reply to message #93182] |
Thu, 29 November 2007 17:51 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
Dear Tom,
Please do not forget always start first scope and then Cubase !
If you close first scope then you will have a problem and only a restart
of computer can bring things up.
So when closing, close first Cubase and then Scope.
If you wanna cahnge settings, like master/slave, 44.1-48khz, ect, FIRST cloae
Cubase , make settings from within scope envirement and then open Cubase,
Regards,
Dimitrios
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Got it. The changes can be made with in Cubase. Didn't find that
>the last time through this. I had been going to Scope to change =
>settings.
>Anyway with some switching and three reboots we are back on track.
>No clicks or pops and all ins/outs are working.
>
>Thanks for making me think.
>Tom
>
> "Tom Bruhl" <arpegio@comcast.net> wrote in message =
>news:474f20bb$1@linux...
> Hi guys,
> I finally have Paris back up and running with Mecs and all.
> Now Cubase SX 2.1 doesn't like running because of clocking issues.
> I am using a Scope Pro card. Cubase will no longer start up
> without Scope running! That's backwards from what was working=20
> in the past. Now with both running it's a clickfest along with the=20
> inevitable crash as the two are fighting for the hardware resources. =20
> With Scope off Cubase gives the white screen of death at start up =
>looking for clock.
>
> With Scope off I used to send Paris (XP) ADAT optical to and from 16 =
>channels of=20
> Scope ADAT. Using Scope card settings at 'Sync/ADAT'. Now, whenever
=
>I set it=20
> to that it doesn't retain the settings and goes back to 'Master/SPDIF'
> whether it's plugged into Paris ADAT/SPDIF or not. I've also tried =
>another
> ADAT machine as the source which had been working while my Mecs were =
>down.
> That doesn't work either.
>
> What am I missing here?
>
> Thanks,
> Tom
>
>
> =20
>
>
> I choose Polesoft Lockspam to fight spam, and you?
> http://www.polesoft.com/refer.html
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Got it. The changes can be made =
>with in=20
>Cubase. Didn't find that</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>the last time through this. I had =
>been going=20
>to Scope to change settings.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Anyway with some switching and three =
>reboots=20
></FONT><FONT face=3DArial size=3D2>we are back on track.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>No clicks or pops and all ins/outs are=20
>working.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>Thanks for making me =
>think.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><BLOCKQUOTE dir=3Dltr=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Tom Bruhl" <<A=20
> href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote =
>in message=20
> <A href=3D"news:474f20bb$1@linux">news:474f20bb$1@linux</A>...</DIV>
> <DIV><FONT face=3DArial size=3D2>Hi guys,</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>I finally have Paris back up and =
>running with=20
> Mecs and all.</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>Now Cubase SX 2.1 doesn't like =
>running because of=20
> clocking issues.</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>I am using a Scope Pro card. =
>Cubase will no=20
> longer start up</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>without Scope running! That's =
>backwards=20
> from what was working </FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>in the past. </FONT><FONT =
>face=3DArial size=3D2>Now=20
> with both running it's a clickfest along with the </FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>inevitable crash </FONT><FONT =
>face=3DArial=20
> size=3D2>as the two are fighting for the hardware resources. =
></FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>With Scope off Cubase gives the white
=
>screen of=20
> death at start up looking for clock.</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> <DIV><FONT face=3DArial size=3D2>With Scope off I used to send =
></FONT><FONT=20
> face=3DArial size=3D2>Paris (XP) ADAT optical to and from 16 channels
=
>of=20
> </FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>Scope ADAT. </FONT><FONT =
>face=3DArial=20
> size=3D2>Using Scope card =
>settings at 'Sync/ADAT'. Now,=20
> whenever I set it </FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>to that it doesn't retain the =
>settings and goes=20
> back to 'Master/SPDIF'</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>whether it's plugged into Paris =
>ADAT/SPDIF or=20
> not. I've also tried another</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>ADAT machine as the source which had
=
>been working=20
> while my Mecs were down.</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>That doesn't work =
>either.</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> <DIV><FONT face=3DArial size=3D2>What am I missing here?</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> <DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> <DIV><FONT face=3DArial size=3D2> </FONT> </DIV>
> <DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam,
=
>and=20
> you?<BR><A=20
> =
>href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>.html</A> </FONT></DIV></BLOCKQUOTE></BODY></HTML>
>
>
|
|
|
|
| Re: Cubase Scope card clocking issue. David, Aaron or Dimitrios ? [message #93187 is a reply to message #93184] |
Thu, 29 November 2007 18:45 |
Tom Bruhl
Messages: 1368
Registered: June 2007
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_00C1_01C832D1.20639550
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hey Dimitrios,
Really? I've been very lucky just leaving Scope closed once the =
settings
are correct. I had been making those changes in Scope but they weren't
staying as I left them even though I saved them to a Scope Project. =
They'd switch
right back to unwanted settings and Cubase wouldn't start right.
Of course I'm not using Scope much yet. Just for it's hardware
and softsynths so far in XTC mode.
I got things working when editing the same paramenters for Scope clock, =
sync,
sample rate inside of Cubase.
I seem to be ok again. I have a bunch of mixes that need to be finished =
before
I really implement some of your great ideas. The auto latency comp for =
Paris
is first on the list!!! Is that working for you?
Cheers,
Tom
"Dimitrios" <musurgio@otenet.gr> wrote in message =
news:474f5ea7$1@linux...
Dear Tom,
Please do not forget always start first scope and then Cubase !
If you close first scope then you will have a problem and only a =
restart
of computer can bring things up.
So when closing, close first Cubase and then Scope.
If you wanna cahnge settings, like master/slave, 44.1-48khz, ect, =
FIRST cloae
Cubase , make settings from within scope envirement and then open =
Cubase,
Regards,
Dimitrios
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Got it. The changes can be made with in Cubase. Didn't find that
>the last time through this. I had been going to Scope to change =3D
>settings.
>Anyway with some switching and three reboots we are back on track.
>No clicks or pops and all ins/outs are working.
>
>Thanks for making me think.
>Tom
>
> "Tom Bruhl" <arpegio@comcast.net> wrote in message =3D
>news:474f20bb$1@linux...
> Hi guys,
> I finally have Paris back up and running with Mecs and all.
> Now Cubase SX 2.1 doesn't like running because of clocking issues.
> I am using a Scope Pro card. Cubase will no longer start up
> without Scope running! That's backwards from what was working=3D20
> in the past. Now with both running it's a clickfest along with =
the=3D20
> inevitable crash as the two are fighting for the hardware =
resources. =3D20
> With Scope off Cubase gives the white screen of death at start up =
=3D
>looking for clock.
>
> With Scope off I used to send Paris (XP) ADAT optical to and from =
16 =3D
>channels of=3D20
> Scope ADAT. Using Scope card settings at 'Sync/ADAT'. Now, =
whenever
=3D
>I set it=3D20
> to that it doesn't retain the settings and goes back to =
'Master/SPDIF'
> whether it's plugged into Paris ADAT/SPDIF or not. I've also tried =
=3D
>another
> ADAT machine as the source which had been working while my Mecs =
were =3D
>down.
> That doesn't work either.
>
> What am I missing here?
>
> Thanks,
> Tom
>
>
> =3D20
>
>
> I choose Polesoft Lockspam to fight spam, and you?
> http://www.polesoft.com/refer.html =20
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>charset=3D3Diso-8859-1">
><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D3D#ffffff>
><DIV><FONT face=3D3DArial size=3D3D2>Got it. The changes can be made =
=3D
>with in=3D20
>Cubase. Didn't find that</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>the last time through this. I =
had =3D
>been going=3D20
>to Scope to change settings.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Anyway with some switching and =
three =3D
>reboots=3D20
></FONT><FONT face=3D3DArial size=3D3D2>we are back on =
track.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>No clicks or pops and all =
ins/outs are=3D20
>working.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Thanks for making me =3D
>think.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
><BLOCKQUOTE dir=3D3Dltr=3D20
>style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
=3D
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Tom Bruhl" <<A=3D20
> href=3D3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> =
wrote =3D
>in message=3D20
> <A =
href=3D3D"news:474f20bb$1@linux">news:474f20bb$1@linux</A>...</DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>Hi guys,</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>I finally have Paris back up =
and =3D
>running with=3D20
> Mecs and all.</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>Now Cubase SX 2.1 doesn't like =
=3D
>running because of=3D20
> clocking issues.</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>I am using a Scope Pro card. =
=3D
>Cubase will no=3D20
> longer start up</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>without Scope running! That's =
=3D
>backwards=3D20
> from what was working </FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>in the past. </FONT><FONT =3D
>face=3D3DArial size=3D3D2>Now=3D20
> with both running it's a clickfest along with the </FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>inevitable crash </FONT><FONT =
=3D
>face=3D3DArial=3D20
> size=3D3D2>as the two are fighting for the hardware resources. =3D
></FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>With Scope off Cubase gives =
the white
=3D
>screen of=3D20
> death at start up looking for clock.</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>With Scope off I used to send =
=3D
></FONT><FONT=3D20
> face=3D3DArial size=3D3D2>Paris (XP) ADAT optical to and from 16 =
channels
=3D
>of=3D20
> </FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>Scope ADAT. </FONT><FONT =3D
>face=3D3DArial=3D20
> size=3D3D2>Using Scope card =3D
>settings at 'Sync/ADAT'. Now,=3D20
> whenever I set it </FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>to that it doesn't retain the =
=3D
>settings and goes=3D20
> back to 'Master/SPDIF'</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>whether it's plugged into =
Paris =3D
>ADAT/SPDIF or=3D20
> not. I've also tried another</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>ADAT machine as the source =
which had
=3D
>been working=3D20
> while my Mecs were down.</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>That doesn't work =3D
>either.</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>What am I missing =
here?</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>Thanks,</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
> <DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> <DIV><FONT face=3D3DArial size=3D3D2></FONT> </DIV>
> <DIV><FONT face=3D3DArial size=3D3D2> </FONT> </DIV>
> <DIV><FONT size=3D3D2><BR><BR>I choose Polesoft Lockspam to fight =
spam,
=3D
>and=3D20
> you?<BR><A=3D20
> =3D
=
>href=3D3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/re=
fer=3D
>.html</A> </FONT></DIV></BLOCKQUOTE></BODY></HTML>
>
>
------=_NextPart_000_00C1_01C832D1.20639550
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hey Dimitrios,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Really? I've been very lucky just =
leaving=20
Scope closed once the settings</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>are correct. I had been making =
those changes=20
in Scope but they weren't</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>staying as I left them even though I =
saved them to=20
a Scope Project. They'd switch</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>right back to unwanted settings and =
Cubase wouldn't=20
start right.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Of course I'm not using Scope much =
yet. =20
Just for it's hardware</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>and softsynths so far in XTC =
mode.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I got things working when editing the =
same=20
paramenters for Scope clock, sync,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>sample rate </FONT><FONT face=3DArial =
size=3D2>inside=20
</FONT><FONT face=3DArial size=3D2>of Cubase.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I seem to be ok again. I have a =
bunch of=20
mixes that need to be finished before</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I really implement some of your great =
ideas. =20
The auto latency comp for Paris</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>is first on the list!!! Is that =
working for=20
you?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Cheers,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Dimitrios" <<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote in =
message=20
<A =
href=3D"news:474f5ea7$1@linux">news:474f5ea7$1@linux</A>...</DIV><BR>Dear=
=20
Tom,<BR>Please do not forget always start first scope and then Cubase =
!<BR>If=20
you close first scope then you will have a problem and only a =
restart<BR>of=20
computer can bring things up.<BR>So when closing, close first Cubase =
and then=20
Scope.<BR>If you wanna cahnge settings, like master/slave, 44.1-48khz, =
ect,=20
FIRST cloae<BR>Cubase , make settings from within scope envirement and =
then=20
open Cubase,<BR>Regards,<BR>Dimitrios<BR><BR>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>>=20
wrote:<BR>><BR>><BR>>Got it. The changes can be made =
with in=20
Cubase. Didn't find that<BR>>the last time through =
this. I had=20
been going to Scope to change =3D<BR>>settings.<BR>>Anyway with =
some=20
switching and three reboots we are back on track.<BR>>No clicks or =
pops and=20
all ins/outs are working.<BR>><BR>>Thanks for making me=20
think.<BR>>Tom<BR>><BR>> "Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote =
in message=20
=3D<BR>>news:474f20bb$1@linux...<BR>> Hi =
guys,<BR>> I=20
finally have Paris back up and running with Mecs and =
all.<BR>> Now=20
Cubase SX 2.1 doesn't like running because of clocking =
issues.<BR>> I=20
am using a Scope Pro card. Cubase will no longer start =
up<BR>> =20
without Scope running! That's backwards from what was=20
working=3D20<BR>> in the past. Now with both running it's a =
clickfest=20
along with the=3D20<BR>> inevitable crash as the two are =
fighting for=20
the hardware resources. =3D20<BR>> With Scope off Cubase =
gives the=20
white screen of death at start up =3D<BR>>looking for=20
clock.<BR>><BR>> With Scope off I used to send Paris (XP) =
ADAT=20
optical to and from 16 =3D<BR>>channels of=3D20<BR>> Scope =
ADAT. =20
Using Scope card settings at 'Sync/ADAT'. Now, =
whenever<BR>=3D<BR>>I=20
set it=3D20<BR>> to that it doesn't retain the settings and =
goes back=20
to 'Master/SPDIF'<BR>> whether it's plugged into Paris =
ADAT/SPDIF or=20
not. I've also tried =3D<BR>>another<BR>> ADAT =
machine as the=20
source which had been working while my Mecs were =
=3D<BR>>down.<BR>> =20
That doesn't work either.<BR>><BR>> What am I missing=20
here?<BR>><BR>> Thanks,<BR>> =20
Tom<BR>><BR>><BR>> =20
=3D20<BR>><BR>><BR>> I choose Polesoft Lockspam to =
fight spam,=20
and you?<BR>> <A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A> =20
<BR>><BR>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0=20
Transitional//EN"><BR>><HTML><HEAD> <BR>><META=20
http-equiv=3D3DContent-Type content=3D3D"text/html;=20
=3D<BR>>charset=3D3Diso-8859-1"><BR>><META =
content=3D3D"MSHTML=20
6.00.2800.1400"=20
=
name=3D3DGENERATOR><BR>><STYLE></STYLE> <BR>></HEA=
D><BR>><BODY=20
bgColor=3D3D#ffffff><BR>><DIV><FONT face=3D3DArial =
size=3D3D2>Got=20
it. The changes can be made =3D<BR>>with in=3D20<BR>>Cubase. =
Didn't find=20
that</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial=20
size=3D3D2>the last time through this. I had =3D<BR>>been =
going=3D20<BR>>to=20
Scope to change =
settings.</FONT></DIV><BR>><DIV><FONT=20
face=3D3DArial size=3D3D2>Anyway with some switching and three=20
=3D<BR>>reboots=3D20<BR>></FONT><FONT face=3D3DArial =
size=3D3D2>we=20
are back on track.</FONT></DIV><BR>><DIV><FONT =
face=3D3DArial size=3D3D2>No clicks or pops and all ins/outs=20
=
are=3D20<BR>>working.</FONT></DIV> <BR>><DIV><F=
ONT=20
face=3D3DArial size=3D3D2></FONT> =
</DIV><BR>><DIV><FONT=20
face=3D3DArial size=3D3D2>Thanks for making me=20
=3D<BR>>think.</FONT></DIV> <BR>><DIV><FONT=20
face=3D3DArial=20
size=3D3D2>Tom</FONT></DIV&g t; <BR>><DIV><FONT=20
face=3D3DArial size=3D3D2></FONT> =
</DIV><BR>><BLOCKQUOTE=20
dir=3D3Dltr=3D20<BR>>style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: =
5px;=20
MARGIN-LEFT: 5px; =3D<BR>>BORDER-LEFT: #000000 2px solid; =
MARGIN-RIGHT:=20
0px"><BR>> <DIV>"Tom Bruhl" =
<<A=3D20<BR>> =20
href=3D3D"<A=20
=
href=3D'mailto:arpegio@comcast.net">arpegio@comcast.net</A'>mailto:arpegi=
o@comcast.net">arpegio@comcast.net</A</A>>>=20
wrote =3D<BR>>in message=3D20<BR>> <A href=3D3D"<A=20
=
href=3D'news:474f20bb$1@linux">news:474f20bb$1@linux</A>...</DIV'>news:47=
4f20bb$1@linux">news:474f20bb$1@linux</A>...</DIV</A>><BR>=
> =20
<DIV><FONT face=3D3DArial size=3D3D2>Hi=20
guys,</FONT></DIV><BR>> <DIV><FONT =
face=3D3DArial=20
size=3D3D2>I finally have Paris back up and =3D<BR>>running=20
with=3D20<BR>> Mecs and =
all.</FONT></DIV><BR>> =20
<DIV><FONT face=3D3DArial size=3D3D2>Now Cubase SX 2.1 =
doesn't like=20
=3D<BR>>running because of=3D20<BR>> clocking=20
issues.</FONT></DIV><BR>> <DIV><FONT=20
face=3D3DArial size=3D3D2>I am using a Scope Pro card. =
=3D<BR>>Cubase will=20
no=3D20<BR>> longer start =
up</FONT></DIV><BR>> =20
<DIV><FONT face=3D3DArial size=3D3D2>without Scope =
running! That's=20
=3D<BR>>backwards=3D20<BR>> from what was working=20
</FONT></DIV><BR>> <DIV><FONT =
face=3D3DArial=20
size=3D3D2>in the past. </FONT><FONT =
=3D<BR>>face=3D3DArial=20
size=3D3D2>Now=3D20<BR>> with both running it's a =
clickfest along with=20
the </FONT></DIV><BR>> <DIV><FONT =
face=3D3DArial=20
size=3D3D2>inevitable crash </FONT><FONT=20
=3D<BR>>face=3D3DArial=3D20<BR>> size=3D3D2>as the two =
are fighting for=20
the hardware resources. =
=3D<BR>></FONT></DIV><BR >> =20
<DIV><FONT face=3D3DArial size=3D3D2>With Scope off Cubase =
gives the=20
white<BR>=3D<BR>>screen of=3D20<BR>> death at start up =
looking for=20
clock.</FONT></DIV><BR>> <DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT> </DIV><BR>> =
<DIV><FONT=20
face=3D3DArial size=3D3D2>With Scope off I used to send=20
=3D<BR>></FONT><FONT=3D20<BR>> face=3D3DArial =
size=3D3D2>Paris=20
(XP) ADAT optical to and from 16 =
channels<BR>=3D<BR>>of=3D20<BR>> =20
</FONT></DIV><BR>> <DIV><FONT =
face=3D3DArial=20
size=3D3D2>Scope ADAT. </FONT><FONT=20
=3D<BR>>face=3D3DArial=3D20<BR>> size=3D3D2>Using Scope =
card=20
=3D<BR>>settings at 'Sync/ADAT'. Now,=3D20<BR>> whenever I =
set it=20
</FONT></DIV><BR>> <DIV><FONT =
face=3D3DArial=20
size=3D3D2>to that it doesn't retain the =3D<BR>>settings and=20
goes=3D20<BR>> back to=20
'Master/SPDIF'</FONT></DIV><BR>> =
<DIV><FONT=20
face=3D3DArial size=3D3D2>whether it's plugged into Paris =
=3D<BR>>ADAT/SPDIF=20
or=3D20<BR>> not. I've also tried=20
another</FONT></DIV><BR>> <DIV><FONT=20
face=3D3DArial size=3D3D2>ADAT machine as the source which =
had<BR>=3D<BR>>been=20
working=3D20<BR>> while my Mecs were=20
down.</FONT></DIV><BR>> <DIV><FONT =
face=3D3DArial=20
size=3D3D2>That doesn't work=20
=3D<BR>>either.</FONT></DIV> <BR>> =
<DIV><FONT=20
face=3D3DArial size=3D3D2></FONT> </DIV><BR>> =20
<DIV><FONT face=3D3DArial size=3D3D2>What am I missing=20
here?</FONT></DIV><BR>> <DIV><FONT =
face=3D3DArial=20
size=3D3D2></FONT> </DIV><BR>> =
<DIV><FONT=20
face=3D3DArial =
size=3D3D2>Thanks,</FONT></DIV&a mp;gt; <BR>> =20
<DIV><FONT face=3D3DArial=20
size=3D3D2>Tom</FONT></DIV&g t; <BR>> =
<DIV><FONT=20
face=3D3DArial size=3D3D2></FONT> </DIV><BR>> =20
<DIV><FONT face=3D3DArial size=3D3D2></FONT>=20
</DIV><BR>> <DIV><FONT face=3D3DArial =
size=3D3D2>=20
</FONT> </DIV><BR>> <DIV><FONT=20
size=3D3D2><BR><BR>I choose Polesoft Lockspam to fight=20
spam,<BR>=3D<BR>>and=3D20<BR>> =
you?<BR><A=3D20<BR>> =20
=3D<BR>>href=3D3D"<A=20
=
href=3D'http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
'>http://www.polesoft.com/refer.html">http://www.polesoft.com/refer</A=
>=3D<BR>>.html</A>=20
=
</FONT></DIV></BLOCKQUOTE ></BODY></HTML> <BR=
>><BR>><BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_00C1_01C832D1.20639550--
|
|
|
|
Goto Forum:
Current Time: Mon May 13 01:28:46 PDT 2024
Total time taken to generate the page: 0.01632 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
