Home » The PARIS Forums » PARIS: Main » DBX 376/386 upgrade info
|
|
|
Re: DBX 376/386 upgrade info [message #72268 is a reply to message #72267] |
Tue, 12 September 2006 11:30 |
brandon[2]
Messages: 380 Registered: June 2006
|
Senior Member |
|
|
So I am just supposed to get Telefunken brand ECC82s?
Would the ECC802 be better?
ECC82: This is the European version of the 12AU7, and is identical to it.
The brands in demand are Telefunken, Amperex, and Mullard. Telefunken tubes
have a diamond shape molded into the bottom of the glass. Both ribbed plate
and the more famous smoothplate types are available, just like the 12AX7,
but are being hunted down and soon may be an endangered species. Amperex and
Mullard have tiny date codes etched in the glass near the bottom of the
tube. The most popular Amperex are the Holland made Bugle Boy series, with
the tiny cartoon tube blowing a bugle on the label. They later went to just
a white label that said "Amperex", and then after that used the orange label
with the world logo. The earlier Mullard tubes had the word "Mullard" inside
of a shield logo, later versions said "IEC Mullard". These are all tubes of
unequalled quality, and are worth the high prices they are commanding these
days. Even used ones will blow away any of the trashy tubes in production
today. Vintage versions again used the chalky paint, and frequently the
labels on any of these tubes are usually smeared.
ECC802: This is a premium version of the European ECC82, with matched triode
sections. These are very rare in the USA, and often command very high
prices.
--
Brandon Goodwin
Process Engineering
Pentech Assembly
"Brandon" <a@a.com> wrote in message news:4506fa00@linux...
> Do you know where I can get the AK5393 chip online?
> Anyone?
>
> Thanks,
>
>
> --
> Brandon
>
>
> "Brandon" <a@a.com> wrote in message news:4506eddc@linux...
> > Thank You Dimitrios!!.
> > Very Much.
> > I will let you know how it turns out.
> >
> >
> > --
> > Brandon "Dimitrios" <musurgio@otenet.gr> wrote in message
> > news:4506e0c6$1@linux...
> > >
> > > Sorry for the time I took to post on this...
> > >
> > > FIrst you change the tubes inside which are ECC82 (12AU7) to
Telefunken.
> > >
> > > Secondly you change the AK5383 AD converter to a AK5393 which will
give
> > you
> > > more than 7 db better signal to noise and distortion !
> > >
> > > Third there are one or two grey polyester caps I guess 0.1uF around
the
> > tube
> > > (tubes) change those with same value WIMA polyprpylene MKP series.
> > >
> > > In 376 you change all polyester caps in the eq section to WIMA.
> > >
> > > That modes will be enouph.
> > >
> > > Hope this helps
> > > Regards,
> > > Dimitrios
> >
> >
>
>
|
|
|
|
Re: DBX 376/386 upgrade info [message #72270 is a reply to message #72268] |
Tue, 12 September 2006 11:34 |
brandon[2]
Messages: 380 Registered: June 2006
|
Senior Member |
|
|
Do I want matched pair tubes?
--
Brandon Goodwin
Process Engineering
Pentech Assembly
"Brandon" <a@a.com> wrote in message news:4506fb09$1@linux...
> So I am just supposed to get Telefunken brand ECC82s?
>
> Would the ECC802 be better?
>
>
>
> ECC82: This is the European version of the 12AU7, and is identical to it.
> The brands in demand are Telefunken, Amperex, and Mullard. Telefunken
tubes
> have a diamond shape molded into the bottom of the glass. Both ribbed
plate
> and the more famous smoothplate types are available, just like the 12AX7,
> but are being hunted down and soon may be an endangered species. Amperex
and
> Mullard have tiny date codes etched in the glass near the bottom of the
> tube. The most popular Amperex are the Holland made Bugle Boy series, with
> the tiny cartoon tube blowing a bugle on the label. They later went to
just
> a white label that said "Amperex", and then after that used the orange
label
> with the world logo. The earlier Mullard tubes had the word "Mullard"
inside
> of a shield logo, later versions said "IEC Mullard". These are all tubes
of
> unequalled quality, and are worth the high prices they are commanding
these
> days. Even used ones will blow away any of the trashy tubes in production
> today. Vintage versions again used the chalky paint, and frequently the
> labels on any of these tubes are usually smeared.
>
> ECC802: This is a premium version of the European ECC82, with matched
triode
> sections. These are very rare in the USA, and often command very high
> prices.
>
>
> --
> Brandon Goodwin
>
> Process Engineering
> Pentech Assembly
> "Brandon" <a@a.com> wrote in message news:4506fa00@linux...
> > Do you know where I can get the AK5393 chip online?
> > Anyone?
> >
> > Thanks,
> >
> >
> > --
> > Brandon
> >
> >
> > "Brandon" <a@a.com> wrote in message news:4506eddc@linux...
> > > Thank You Dimitrios!!.
> > > Very Much.
> > > I will let you know how it turns out.
> > >
> > >
> > > --
> > > Brandon "Dimitrios" <musurgio@otenet.gr> wrote in message
> > > news:4506e0c6$1@linux...
> > > >
> > > > Sorry for the time I took to post on this...
> > > >
> > > > FIrst you change the tubes inside which are ECC82 (12AU7) to
> Telefunken.
> > > >
> > > > Secondly you change the AK5383 AD converter to a AK5393 which will
> give
> > > you
> > > > more than 7 db better signal to noise and distortion !
> > > >
> > > > Third there are one or two grey polyester caps I guess 0.1uF around
> the
> > > tube
> > > > (tubes) change those with same value WIMA polyprpylene MKP series.
> > > >
> > > > In 376 you change all polyester caps in the eq section to WIMA.
> > > >
> > > > That modes will be enouph.
> > > >
> > > > Hope this helps
> > > > Regards,
> > > > Dimitrios
> > >
> > >
> >
> >
>
>
|
|
|
Re: DBX 376/386 upgrade info [message #72280 is a reply to message #72268] |
Tue, 12 September 2006 12:43 |
dc[3]
Messages: 895 Registered: September 2005
|
Senior Member |
|
|
Be aware that these will be expensive. Also, be careful who
you buy from, since there are lots of fake Telefunkens out there.
Dougs has some used ones:
http://www.dougstubes.com/12au7.htm
I haven't bought from these guys, but they list them (do a page
search for telefunken)
http://pages.prodigy.net/jimmcshane/tubes.htm
This guy has 'em (again, do a page search)
http://www.vacuumtube.com/guitar.htm
I would also email Mike at KCA and let him know you are looking
and he will come up with them at one point or another.
http://kcanostubes.com/content/
They are available on ebay, but be VERY careful who you buy from!
Good luck.
DC
"Brandon" <a@a.com> wrote:
>So I am just supposed to get Telefunken brand ECC82s?
>
>Would the ECC802 be better?
>
>
>
>ECC82: This is the European version of the 12AU7, and is identical to it.
>The brands in demand are Telefunken, Amperex, and Mullard. Telefunken tubes
>have a diamond shape molded into the bottom of the glass. Both ribbed plate
>and the more famous smoothplate types are available, just like the 12AX7,
>but are being hunted down and soon may be an endangered species. Amperex
and
>Mullard have tiny date codes etched in the glass near the bottom of the
>tube. The most popular Amperex are the Holland made Bugle Boy series, with
>the tiny cartoon tube blowing a bugle on the label. They later went to just
>a white label that said "Amperex", and then after that used the orange label
>with the world logo. The earlier Mullard tubes had the word "Mullard" inside
>of a shield logo, later versions said "IEC Mullard". These are all tubes
of
>unequalled quality, and are worth the high prices they are commanding these
>days. Even used ones will blow away any of the trashy tubes in production
>today. Vintage versions again used the chalky paint, and frequently the
>labels on any of these tubes are usually smeared.
>
>ECC802: This is a premium version of the European ECC82, with matched triode
>sections. These are very rare in the USA, and often command very high
>prices.
>
>
>--
>Brandon Goodwin
>
>Process Engineering
>Pentech Assembly
>"Brandon" <a@a.com> wrote in message news:4506fa00@linux...
>> Do you know where I can get the AK5393 chip online?
>> Anyone?
>>
>> Thanks,
>>
>>
>> --
>> Brandon
>>
>>
>> "Brandon" <a@a.com> wrote in message news:4506eddc@linux...
>> > Thank You Dimitrios!!.
>> > Very Much.
>> > I will let you know how it turns out.
>> >
>> >
>> > --
>> > Brandon "Dimitrios" <musurgio@otenet.gr> wrote in message
>> > news:4506e0c6$1@linux...
>> > >
>> > > Sorry for the time I took to post on this...
>> > >
>> > > FIrst you change the tubes inside which are ECC82 (12AU7) to
>Telefunken.
>> > >
>> > > Secondly you change the AK5383 AD converter to a AK5393 which will
>give
>> > you
>> > > more than 7 db better signal to noise and distortion !
>> > >
>> > > Third there are one or two grey polyester caps I guess 0.1uF around
>the
>> > tube
>> > > (tubes) change those with same value WIMA polyprpylene MKP series.
>> > >
>> > > In 376 you change all polyester caps in the eq section to WIMA.
>> > >
>> > > That modes will be enouph.
>> > >
>> > > Hope this helps
>> > > Regards,
>> > > Dimitrios
>> >
>> >
>>
>>
>
>
|
|
|
Re: DBX 376/386 upgrade info [message #72281 is a reply to message #72280] |
Tue, 12 September 2006 12:57 |
brandon[2]
Messages: 380 Registered: June 2006
|
Senior Member |
|
|
Thanks, I was looking here.
http://www.audiotubes.com/12au7.htm
Heard of em'?
--
Brandon Goodwin
Process Engineering
Pentech Assembly
"DC" <DC@spammersinhell.com> wrote in message news:45070dd5$1@linux...
>
> Be aware that these will be expensive. Also, be careful who
> you buy from, since there are lots of fake Telefunkens out there.
>
>
> Dougs has some used ones:
>
> http://www.dougstubes.com/12au7.htm
>
> I haven't bought from these guys, but they list them (do a page
> search for telefunken)
> http://pages.prodigy.net/jimmcshane/tubes.htm
>
> This guy has 'em (again, do a page search)
> http://www.vacuumtube.com/guitar.htm
>
> I would also email Mike at KCA and let him know you are looking
> and he will come up with them at one point or another.
>
> http://kcanostubes.com/content/
>
>
> They are available on ebay, but be VERY careful who you buy from!
>
> Good luck.
>
> DC
>
>
>
> "Brandon" <a@a.com> wrote:
> >So I am just supposed to get Telefunken brand ECC82s?
> >
> >Would the ECC802 be better?
> >
> >
> >
> >ECC82: This is the European version of the 12AU7, and is identical to it.
> >The brands in demand are Telefunken, Amperex, and Mullard. Telefunken
tubes
> >have a diamond shape molded into the bottom of the glass. Both ribbed
plate
> >and the more famous smoothplate types are available, just like the 12AX7,
> >but are being hunted down and soon may be an endangered species. Amperex
> and
> >Mullard have tiny date codes etched in the glass near the bottom of the
> >tube. The most popular Amperex are the Holland made Bugle Boy series,
with
> >the tiny cartoon tube blowing a bugle on the label. They later went to
just
> >a white label that said "Amperex", and then after that used the orange
label
> >with the world logo. The earlier Mullard tubes had the word "Mullard"
inside
> >of a shield logo, later versions said "IEC Mullard". These are all tubes
> of
> >unequalled quality, and are worth the high prices they are commanding
these
> >days. Even used ones will blow away any of the trashy tubes in production
> >today. Vintage versions again used the chalky paint, and frequently the
> >labels on any of these tubes are usually smeared.
> >
> >ECC802: This is a premium version of the European ECC82, with matched
triode
> >sections. These are very rare in the USA, and often command very high
> >prices.
> >
> >
> >--
> >Brandon Goodwin
> >
> >Process Engineering
> >Pentech Assembly
> >"Brandon" <a@a.com> wrote in message news:4506fa00@linux...
> >> Do you know where I can get the AK5393 chip online?
> >> Anyone?
> >>
> >> Thanks,
> >>
> >>
> >> --
> >> Brandon
> >>
> >>
> >> "Brandon" <a@a.com> wrote in message news:4506eddc@linux...
> >> > Thank You Dimitrios!!.
> >> > Very Much.
> >> > I will let you know how it turns out.
> >> >
> >> >
> >> > --
> >> > Brandon "Dimitrios" <musurgio@otenet.gr> wrote in message
> >> > news:4506e0c6$1@linux...
> >> > >
> >> > > Sorry for the time I took to post on this...
> >> > >
> >> > > FIrst you change the tubes inside which are ECC82 (12AU7) to
> >Telefunken.
> >> > >
> >> > > Secondly you change the AK5383 AD converter to a AK5393 which will
> >give
> >> > you
> >> > > more than 7 db better signal to noise and distortion !
> >> > >
> >> > > Third there are one or two grey polyester caps I guess 0.1uF around
> >the
> >> > tube
> >> > > (tubes) change those with same value WIMA polyprpylene MKP series.
> >> > >
> >> > > In 376 you change all polyester caps in the eq section to WIMA.
> >> > >
> >> > > That modes will be enouph.
> >> > >
> >> > > Hope this helps
> >> > > Regards,
> >> > > Dimitrios
> >> >
> >> >
> >>
> >>
> >
> >
>
|
|
|
Re: DBX 376/386 upgrade info [message #72286 is a reply to message #72281] |
Tue, 12 September 2006 14:46 |
dc[3]
Messages: 895 Registered: September 2005
|
Senior Member |
|
|
I know of them, but have not purchased, so I can't comment.
What's his price?
DC
"Brandon" <a@a.com> wrote:
>Thanks, I was looking here.
>http://www.audiotubes.com/12au7.htm
>Heard of em'?
>
>
>--
>Brandon Goodwin
>
>Process Engineering
>Pentech Assembly
>"DC" <DC@spammersinhell.com> wrote in message news:45070dd5$1@linux...
>>
>> Be aware that these will be expensive. Also, be careful who
>> you buy from, since there are lots of fake Telefunkens out there.
>>
>>
>> Dougs has some used ones:
>>
>> http://www.dougstubes.com/12au7.htm
>>
>> I haven't bought from these guys, but they list them (do a page
>> search for telefunken)
>> http://pages.prodigy.net/jimmcshane/tubes.htm
>>
>> This guy has 'em (again, do a page search)
>> http://www.vacuumtube.com/guitar.htm
>>
>> I would also email Mike at KCA and let him know you are looking
>> and he will come up with them at one point or another.
>>
>> http://kcanostubes.com/content/
>>
>>
>> They are available on ebay, but be VERY careful who you buy from!
>>
>> Good luck.
>>
>> DC
>>
>>
>>
>> "Brandon" <a@a.com> wrote:
>> >So I am just supposed to get Telefunken brand ECC82s?
>> >
>> >Would the ECC802 be better?
>> >
>> >
>> >
>> >ECC82: This is the European version of the 12AU7, and is identical to
it.
>> >The brands in demand are Telefunken, Amperex, and Mullard. Telefunken
>tubes
>> >have a diamond shape molded into the bottom of the glass. Both ribbed
>plate
>> >and the more famous smoothplate types are available, just like the 12AX7,
>> >but are being hunted down and soon may be an endangered species. Amperex
>> and
>> >Mullard have tiny date codes etched in the glass near the bottom of the
>> >tube. The most popular Amperex are the Holland made Bugle Boy series,
>with
>> >the tiny cartoon tube blowing a bugle on the label. They later went to
>just
>> >a white label that said "Amperex", and then after that used the orange
>label
>> >with the world logo. The earlier Mullard tubes had the word "Mullard"
>inside
>> >of a shield logo, later versions said "IEC Mullard". These are all tubes
>> of
>> >unequalled quality, and are worth the high prices they are commanding
>these
>> >days. Even used ones will blow away any of the trashy tubes in production
>> >today. Vintage versions again used the chalky paint, and frequently the
>> >labels on any of these tubes are usually smeared.
>> >
>> >ECC802: This is a premium version of the European ECC82, with matched
>triode
>> >sections. These are very rare in the USA, and often command very high
>> >prices.
>> >
>> >
>> >--
>> >Brandon Goodwin
>> >
>> >Process Engineering
>> >Pentech Assembly
>> >"Brandon" <a@a.com> wrote in message news:4506fa00@linux...
>> >> Do you know where I can get the AK5393 chip online?
>> >> Anyone?
>> >>
>> >> Thanks,
>> >>
>> >>
>> >> --
>> >> Brandon
>> >>
>> >>
>> >> "Brandon" <a@a.com> wrote in message news:4506eddc@linux...
>> >> > Thank You Dimitrios!!.
>> >> > Very Much.
>> >> > I will let you know how it turns out.
>> >> >
>> >> >
>> >> > --
>> >> > Brandon "Dimitrios" <musurgio@otenet.gr> wrote in message
>> >> > news:4506e0c6$1@linux...
>> >> > >
>> >> > > Sorry for the time I took to post on this...
>> >> > >
>> >> > > FIrst you change the tubes inside which are ECC82 (12AU7) to
>> >Telefunken.
>> >> > >
>> >> > > Secondly you change the AK5383 AD converter to a AK5393 which will
>> >give
>> >> > you
>> >> > > more than 7 db better signal to noise and distortion !
>> >> > >
>> >> > > Third there are one or two grey polyester caps I guess 0.1uF around
>> >the
>> >> > tube
>> >> > > (tubes) change those with same value WIMA polyprpylene MKP series.
>> >> > >
>> >> > > In 376 you change all polyester caps in the eq section to WIMA.
>> >> > >
>> >> > > That modes will be enouph.
>> >> > >
>> >> > > Hope this helps
>> >> > > Regards,
>> >> > > Dimitrios
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>
>
|
|
|
Re: DBX 376/386 upgrade info [message #72297 is a reply to message #72281] |
Tue, 12 September 2006 22:35 |
Dimitrios
Messages: 1056 Registered: August 2005
|
Senior Member |
|
|
Hello Brandon,
Yes there are many fakes out there.
I happen to have some NOS Telefunken (original not fake :) so I might sell
a couple.
I am asking 100 $ for both.
This is a very good price for NOS ones.
The only negative is that there are not in original boxes.
They were bought on a bulk but they are definetely NOS.
Regards,
Dimitrios
"Brandon" <a@a.com> wrote:
>Thanks, I was looking here.
>http://www.audiotubes.com/12au7.htm
>Heard of em'?
>
>
>--
>Brandon Goodwin
>
>Process Engineering
>Pentech Assembly
>"DC" <DC@spammersinhell.com> wrote in message news:45070dd5$1@linux...
>>
>> Be aware that these will be expensive. Also, be careful who
>> you buy from, since there are lots of fake Telefunkens out there.
>>
>>
>> Dougs has some used ones:
>>
>> http://www.dougstubes.com/12au7.htm
>>
>> I haven't bought from these guys, but they list them (do a page
>> search for telefunken)
>> http://pages.prodigy.net/jimmcshane/tubes.htm
>>
>> This guy has 'em (again, do a page search)
>> http://www.vacuumtube.com/guitar.htm
>>
>> I would also email Mike at KCA and let him know you are looking
>> and he will come up with them at one point or another.
>>
>> http://kcanostubes.com/content/
>>
>>
>> They are available on ebay, but be VERY careful who you buy from!
>>
>> Good luck.
>>
>> DC
>>
>>
>>
>> "Brandon" <a@a.com> wrote:
>> >So I am just supposed to get Telefunken brand ECC82s?
>> >
>> >Would the ECC802 be better?
>> >
>> >
>> >
>> >ECC82: This is the European version of the 12AU7, and is identical to
it.
>> >The brands in demand are Telefunken, Amperex, and Mullard. Telefunken
>tubes
>> >have a diamond shape molded into the bottom of the glass. Both ribbed
>plate
>> >and the more famous smoothplate types are available, just like the 12AX7,
>> >but are being hunted down and soon may be an endangered species. Amperex
>> and
>> >Mullard have tiny date codes etched in the glass near the bottom of the
>> >tube. The most popular Amperex are the Holland made Bugle Boy series,
>with
>> >the tiny cartoon tube blowing a bugle on the label. They later went to
>just
>> >a white label that said "Amperex", and then after that used the orange
>label
>> >with the world logo. The earlier Mullard tubes had the word "Mullard"
>inside
>> >of a shield logo, later versions said "IEC Mullard". These are all tubes
>> of
>> >unequalled quality, and are worth the high prices they are commanding
>these
>> >days. Even used ones will blow away any of the trashy tubes in production
>> >today. Vintage versions again used the chalky paint, and frequently the
>> >labels on any of these tubes are usually smeared.
>> >
>> >ECC802: This is a premium version of the European ECC82, with matched
>triode
>> >sections. These are very rare in the USA, and often command very high
>> >prices.
>> >
>> >
>> >--
>> >Brandon Goodwin
>> >
>> >Process Engineering
>> >Pentech Assembly
>> >"Brandon" <a@a.com> wrote in message news:4506fa00@linux...
>> >> Do you know where I can get the AK5393 chip online?
>> >> Anyone?
>> >>
>> >> Thanks,
>> >>
>> >>
>> >> --
>> >> Brandon
>> >>
>> >>
>> >> "Brandon" <a@a.com> wrote in message news:4506eddc@linux...
>> >> > Thank You Dimitrios!!.
>> >> > Very Much.
>> >> > I will let you know how it turns out.
>> >> >
>> >> >
>> >> > --
>> >> > Brandon "Dimitrios" <musurgio@otenet.gr> wrote in message
>> >> > news:4506e0c6$1@linux...
>> >> > >
>> >> > > Sorry for the time I took to post on this...
>> >> > >
>> >> > > FIrst you change the tubes inside which are ECC82 (12AU7) to
>> >Telefunken.
>> >> > >
>> >> > > Secondly you change the AK5383 AD converter to a AK5393 which will
>> >give
>> >> > you
>> >> > > more than 7 db better signal to noise and distortion !
>> >> > >
>> >> > > Third there are one or two grey polyester caps I guess 0.1uF around
>> >the
>> >> > tube
>> >> > > (tubes) change those with same value WIMA polyprpylene MKP series.
>> >> > >
>> >> > > In 376 you change all polyester caps in the eq section to WIMA.
>> >> > >
>> >> > > That modes will be enouph.
>> >> > >
>> >> > > Hope this helps
>> >> > > Regards,
>> >> > > Dimitrios
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>
>
|
|
|
Re: DBX 376/386 upgrade info [message #72304 is a reply to message #72297] |
Wed, 13 September 2006 05:29 |
brandon[2]
Messages: 380 Registered: June 2006
|
Senior Member |
|
|
--
Brandon Goodwin
Process Engineering
Pentech Assembly
"DImitrios" <musurgio@otenet.gr> wrote in message news:4507989b$1@linux...
>
> Hello Brandon,
> Yes there are many fakes out there.
> I happen to have some NOS Telefunken (original not fake :) so I might sell
> a couple.
> I am asking 100 $ for both.
> This is a very good price for NOS ones.
> The only negative is that there are not in original boxes.
> They were bought on a bulk but they are definetely NOS.
> Regards,
> Dimitrios
>
> "Brandon" <a@a.com> wrote:
> >Thanks, I was looking here.
> >http://www.audiotubes.com/12au7.htm
> >Heard of em'?
> >
> >
> >--
> >Brandon Goodwin
> >
> >Process Engineering
> >Pentech Assembly
> >"DC" <DC@spammersinhell.com> wrote in message news:45070dd5$1@linux...
> >>
> >> Be aware that these will be expensive. Also, be careful who
> >> you buy from, since there are lots of fake Telefunkens out there.
> >>
> >>
> >> Dougs has some used ones:
> >>
> >> http://www.dougstubes.com/12au7.htm
> >>
> >> I haven't bought from these guys, but they list them (do a page
> >> search for telefunken)
> >> http://pages.prodigy.net/jimmcshane/tubes.htm
> >>
> >> This guy has 'em (again, do a page search)
> >> http://www.vacuumtube.com/guitar.htm
> >>
> >> I would also email Mike at KCA and let him know you are looking
> >> and he will come up with them at one point or another.
> >>
> >> http://kcanostubes.com/content/
> >>
> >>
> >> They are available on ebay, but be VERY careful who you buy from!
> >>
> >> Good luck.
> >>
> >> DC
> >>
> >>
> >>
> >> "Brandon" <a@a.com> wrote:
> >> >So I am just supposed to get Telefunken brand ECC82s?
> >> >
> >> >Would the ECC802 be better?
> >> >
> >> >
> >> >
> >> >ECC82: This is the European version of the 12AU7, and is identical to
> it.
> >> >The brands in demand are Telefunken, Amperex, and Mullard. Telefunken
> >tubes
> >> >have a diamond shape molded into the bottom of the glass. Both ribbed
> >plate
> >> >and the more famous smoothplate types are available, just like the
12AX7,
> >> >but are being hunted down and soon may be an endangered species.
Amperex
> >> and
> >> >Mullard have tiny date codes etched in the glass near the bottom of
the
> >> >tube. The most popular Amperex are the Holland made Bugle Boy series,
> >with
> >> >the tiny cartoon tube blowing a bugle on the label. They later went to
> >just
> >> >a white label that said "Amperex", and then after that used the orange
> >label
> >> >with the world logo. The earlier Mullard tubes had the word "Mullard"
> >inside
> >> >of a shield logo, later versions said "IEC Mullard". These are all
tubes
> >> of
> >> >unequalled quality, and are worth the high prices they are commanding
> >these
> >> >days. Even used ones will blow away any of the trashy tubes in
production
> >> >today. Vintage versions again used the chalky paint, and frequently
the
> >> >labels on any of these tubes are usually smeared.
> >> >
> >> >ECC802: This is a premium version of the European ECC82, with matched
> >triode
> >> >sections. These are very rare in the USA, and often command very high
> >> >prices.
> >> >
> >> >
> >> >--
> >> >Brandon Goodwin
> >> >
> >> >Process Engineering
> >> >Pentech Assembly
> >> >"Brandon" <a@a.com> wrote in message news:4506fa00@linux...
> >> >> Do you know where I can get the AK5393 chip online?
> >> >> Anyone?
> >> >>
> >> >> Thanks,
> >> >>
> >> >>
> >> >> --
> >> >> Brandon
> >> >>
> >> >>
> >> >> "Brandon" <a@a.com> wrote in message news:4506eddc@linux...
> >> >> > Thank You Dimitrios!!.
> >> >> > Very Much.
> >> >> > I will let you know how it turns out.
> >> >> >
> >> >> >
> >> >> > --
> >> >> > Brandon "Dimitrios" <musurgio@otenet.gr> wrote in message
> >> >> > news:4506e0c6$1@linux...
> >> >> > >
> >> >> > > Sorry for the time I took to post on this...
> >> >> > >
> >> >> > > FIrst you change the tubes inside which are ECC82 (12AU7) to
> >> >Telefunken.
> >> >> > >
> >> >> > > Secondly you change the AK5383 AD converter to a AK5393 which
will
> >> >give
> >> >> > you
> >> >> > > more than 7 db better signal to noise and distortion !
> >> >> > >
> >> >> > > Third there are one or two grey polyester caps I guess 0.1uF
around
> >> >the
> >> >> > tube
> >> >> > > (tubes) change those with same value WIMA polyprpylene MKP
series.
> >> >> > >
> >> >> > > In 376 you change all polyester caps in the eq section to WIMA.
> >> >> > >
> >> >> > > That modes will be enouph.
> >> >> > >
> >> >> > > Hope this helps
> >> >> > > Regards,
> >> >> > > Dimitrios
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >
> >
>
|
|
|
Re: DBX 376/386 upgrade info [message #72305 is a reply to message #72297] |
Wed, 13 September 2006 05:36 |
brandon[2]
Messages: 380 Registered: June 2006
|
Senior Member |
|
|
Dimitrios,
Were these tested for noise and microphonic distortion prior to you
purchasing them?
Do you offer any guarantee?
If so...please reserve them for me until next week.
Thanks!!
--
Brandon
"DImitrios" <musurgio@otenet.gr> wrote in message news:4507989b$1@linux...
>
> Hello Brandon,
> Yes there are many fakes out there.
> I happen to have some NOS Telefunken (original not fake :) so I might sell
> a couple.
> I am asking 100 $ for both.
> This is a very good price for NOS ones.
> The only negative is that there are not in original boxes.
> They were bought on a bulk but they are definetely NOS.
> Regards,
> Dimitrios
>
> "Brandon" <a@a.com> wrote:
> >Thanks, I was looking here.
> >http://www.audiotubes.com/12au7.htm
> >Heard of em'?
> >
> >
> >--
> >Brandon Goodwin
> >
> >Process Engineering
> >Pentech Assembly
> >"DC" <DC@spammersinhell.com> wrote in message news:45070dd5$1@linux...
> >>
> >> Be aware that these will be expensive. Also, be careful who
> >> you buy from, since there are lots of fake Telefunkens out there.
> >>
> >>
> >> Dougs has some used ones:
> >>
> >> http://www.dougstubes.com/12au7.htm
> >>
> >> I haven't bought from these guys, but they list them (do a page
> >> search for telefunken)
> >> http://pages.prodigy.net/jimmcshane/tubes.htm
> >>
> >> This guy has 'em (again, do a page search)
> >> http://www.vacuumtube.com/guitar.htm
> >>
> >> I would also email Mike at KCA and let him know you are looking
> >> and he will come up with them at one point or another.
> >>
> >> http://kcanostubes.com/content/
> >>
> >>
> >> They are available on ebay, but be VERY careful who you buy from!
> >>
> >> Good luck.
> >>
> >> DC
> >>
> >>
> >>
> >> "Brandon" <a@a.com> wrote:
> >> >So I am just supposed to get Telefunken brand ECC82s?
> >> >
> >> >Would the ECC802 be better?
> >> >
> >> >
> >> >
> >> >ECC82: This is the European version of the 12AU7, and is identical to
> it.
> >> >The brands in demand are Telefunken, Amperex, and Mullard. Telefunken
> >tubes
> >> >have a diamond shape molded into the bottom of the glass. Both ribbed
> >plate
> >> >and the more famous smoothplate types are available, just like the
12AX7,
> >> >but are being hunted down and soon may be an endangered species.
Amperex
> >> and
> >> >Mullard have tiny date codes etched in the glass near the bottom of
the
> >> >tube. The most popular Amperex are the Holland made Bugle Boy series,
> >with
> >> >the tiny cartoon tube blowing a bugle on the label. They later went to
> >just
> >> >a white label that said "Amperex", and then after that used the orange
> >label
> >> >with the world logo. The earlier Mullard tubes had the word "Mullard"
> >inside
> >> >of a shield logo, later versions said "IEC Mullard". These are all
tubes
> >> of
> >> >unequalled quality, and are worth the high prices they are commanding
> >these
> >> >days. Even used ones will blow away any of the trashy tubes in
production
> >> >today. Vintage versions again used the chalky paint, and frequently
the
> >> >labels on any of these tubes are usually smeared.
> >> >
> >> >ECC802: This is a premium version of the European ECC82, with matched
> >triode
> >> >sections. These are very rare in the USA, and often command very high
> >> >prices.
> >> >
> >> >
> >> >--
> >> >Brandon Goodwin
> >> >
> >> >Process Engineering
> >> >Pentech Assembly
> >> >"Brandon" <a@a.com> wrote in message news:4506fa00@linux...
> >> >> Do you know where I can get the AK5393 chip online?
> >> >> Anyone?
> >> >>
> >> >> Thanks,
> >> >>
> >> >>
> >> >> --
> >> >> Brandon
> >> >>
> >> >>
> >> >> "Brandon" <a@a.com> wrote in message news:4506eddc@linux...
> >> >> > Thank You Dimitrios!!.
> >> >> > Very Much.
> >> >> > I will let you know how it turns out.
> >> >> >
> >> >> >
> >> >> > --
> >> >> > Brandon "Dimitrios" <musurgio@otenet.gr> wrote in message
> >> >> > news:4506e0c6$1@linux...
> >> >> > >
> >> >> > > Sorry for the time I took to post on this...
> >> >> > >
> >> >> > > FIrst you change the tubes inside which are ECC82 (12AU7) to
> >> >Telefunken.
> >> >> > >
> >> >> > > Secondly you change the AK5383 AD converter to a AK5393 which
will
> >> >give
> >> >> > you
> >> >> > > more than 7 db better signal to noise and distortion !
> >> >> > >
> >> >> > > Third there are one or two grey polyester caps I guess 0.1uF
around
> >> >the
> >> >> > tube
> >> >> > > (tubes) change those with same value WIMA polyprpylene MKP
series.
> >> >> > >
> >> >> > > In 376 you change all polyester caps in the eq section to WIMA.
> >> >> > >
> >> >> > > That modes will be enouph.
> >> >> > >
> >> >> > > Hope this helps
> >> >> > > Regards,
> >> >> > > Dimitrios
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >
> >
>
|
|
|
DIMITRIOS Re: DBX 376/386 upgrade info [message #72656 is a reply to message #72305] |
Mon, 18 September 2006 20:54 |
brandon[2]
Messages: 380 Registered: June 2006
|
Senior Member |
|
|
Dimitrios,
Were these tested for noise and microphonic distortion prior to you
purchasing them?
Do you offer any guarantee?
If so...please reserve them for me until next week.
Thanks!!
--
Brandon
"Brandon" <a@a.com> wrote:
>Dimitrios,
>
>Were these tested for noise and microphonic distortion prior to you
>purchasing them?
>Do you offer any guarantee?
>If so...please reserve them for me until next week.
>Thanks!!
>--
>Brandon
>
>
>
>"DImitrios" <musurgio@otenet.gr> wrote in message news:4507989b$1@linux...
>>
>> Hello Brandon,
>> Yes there are many fakes out there.
>> I happen to have some NOS Telefunken (original not fake :) so I might
sell
>> a couple.
>> I am asking 100 $ for both.
>> This is a very good price for NOS ones.
>> The only negative is that there are not in original boxes.
>> They were bought on a bulk but they are definetely NOS.
>> Regards,
>> Dimitrios
>>
>> "Brandon" <a@a.com> wrote:
>> >Thanks, I was looking here.
>> >http://www.audiotubes.com/12au7.htm
>> >Heard of em'?
>> >
>> >
>> >--
>> >Brandon Goodwin
>> >
>> >Process Engineering
>> >Pentech Assembly
>> >"DC" <DC@spammersinhell.com> wrote in message news:45070dd5$1@linux...
>> >>
>> >> Be aware that these will be expensive. Also, be careful who
>> >> you buy from, since there are lots of fake Telefunkens out there.
>> >>
>> >>
>> >> Dougs has some used ones:
>> >>
>> >> http://www.dougstubes.com/12au7.htm
>> >>
>> >> I haven't bought from these guys, but they list them (do a page
>> >> search for telefunken)
>> >> http://pages.prodigy.net/jimmcshane/tubes.htm
>> >>
>> >> This guy has 'em (again, do a page search)
>> >> http://www.vacuumtube.com/guitar.htm
>> >>
>> >> I would also email Mike at KCA and let him know you are looking
>> >> and he will come up with them at one point or another.
>> >>
>> >> http://kcanostubes.com/content/
>> >>
>> >>
>> >> They are available on ebay, but be VERY careful who you buy from!
>> >>
>> >> Good luck.
>> >>
>> >> DC
>> >>
>> >>
>> >>
>> >> "Brandon" <a@a.com> wrote:
>> >> >So I am just supposed to get Telefunken brand ECC82s?
>> >> >
>> >> >Would the ECC802 be better?
>> >> >
>> >> >
>> >> >
>> >> >ECC82: This is the European version of the 12AU7, and is identical
to
>> it.
>> >> >The brands in demand are Telefunken, Amperex, and Mullard. Telefunken
>> >tubes
>> >> >have a diamond shape molded into the bottom of the glass. Both ribbed
>> >plate
>> >> >and the more famous smoothplate types are available, just like the
>12AX7,
>> >> >but are being hunted down and soon may be an endangered species.
>Amperex
>> >> and
>> >> >Mullard have tiny date codes etched in the glass near the bottom of
>the
>> >> >tube. The most popular Amperex are the Holland made Bugle Boy series,
>> >with
>> >> >the tiny cartoon tube blowing a bugle on the label. They later went
to
>> >just
>> >> >a white label that said "Amperex", and then after that used the orange
>> >label
>> >> >with the world logo. The earlier Mullard tubes had the word "Mullard"
>> >inside
>> >> >of a shield logo, later versions said "IEC Mullard". These are all
>tubes
>> >> of
>> >> >unequalled quality, and are worth the high prices they are commanding
>> >these
>> >> >days. Even used ones will blow away any of the trashy tubes in
>production
>> >> >today. Vintage versions again used the chalky paint, and frequently
>the
>> >> >labels on any of these tubes are usually smeared.
>> >> >
>> >> >ECC802: This is a premium version of the European ECC82, with matched
>> >triode
>> >> >sections. These are very rare in the USA, and often command very high
>> >> >prices.
>> >> >
>> >> >
>> >> >--
>> >> >Brandon Goodwin
>> >> >
>> >> >Process Engineering
>> >> >Pentech Assembly
>> >> >"Brandon" <a@a.com> wrote in message news:4506fa00@linux...
>> >> >> Do you know where I can get the AK5393 chip online?
>> >> >> Anyone?
>> >> >>
>> >> >> Thanks,
>> >> >>
>> >> >>
>> >> >> --
>> >> >> Brandon
>> >> >>
>> >> >>
>> >> >> "Brandon" <a@a.com> wrote in message news:4506eddc@linux...
>> >> >> > Thank You Dimitrios!!.
>> >> >> > Very Much.
>> >> >> > I will let you know how it turns out.
>> >> >> >
>> >> >> >
>> >> >> > --
>> >> >> > Brandon "Dimitrios" <musurgio@otenet.gr> wrote in message
>> >> >> > news:4506e0c6$1@linux...
>> >> >> > >
>> >> >> > > Sorry for the time I took to post on this...
>> >> >> > >
>> >> >> > > FIrst you change the tubes inside which are ECC82 (12AU7) to
>> >> >Telefunken.
>> >> >> > >
>> >> >> > > Secondly you change the AK5383 AD converter to a AK5393 which
>will
>> >> >give
>> >> >> > you
>> >> >> > > more than 7 db better signal to noise and distortion !
>> >> >> > >
>> >> >> > > Third there are one or two grey polyester caps I guess 0.1uF
>around
>> >> >the
>> >> >> > tube
>> >> >> > > (tubes) change those with same value WIMA polyprpylene MKP
>series.
>> >> >> > >
>> >> >> > > In 376 you change all polyester caps in the eq section to WIMA.
>> >> >> > >
>> >> >> > > That modes will be enouph.
>> >> >> > >
>> >> >> > > Hope this helps
>> >> >> > > Regards,
>> >> >> > > Dimitrios
>> >> >> >
>> >> >> >
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >
>> >
>>
>
>
|
|
|
Goto Forum:
Current Time: Tue Dec 24 02:15:21 PST 2024
Total time taken to generate the page: 0.05967 seconds
|