Home » The PARIS Forums » PARIS: Projects » VirtuaVia expansion chassis (budget "Magmas") TESTED and WORKING with PARIS
|
Re: VirtuaVia expansion chassis (budget "Magmas") TESTED and WORKING with PARIS [message #108332 is a reply to message #103094] |
Sun, 03 August 2014 02:33 |
danielcornelius
Messages: 171 Registered: May 2012
|
Senior Member |
|
|
Hi Kerry,
your link isn't right any more !
Here is the new Link :
http://www.virtuavia.eu/shop/pci-express-to-pci-expansion-bo x.html
or another Link, there are 2 Versions of chassis with Powersupply, this one fits with EDS Cards, below in the link !!
http://www.exsys.ch/index.php?main_page=index&cPath=92&a mp;a mp;a mp;zenid=668fc67be85eb9de557760064db47afc
This one is the Exsys Chassis and i have many problems with it (discribed here : http://kerrygalloway.com/ParisForums/index.php?t=msg&th= 15523&start=0& ). This one works fine with 2 Cards, but if i have installed the 3rd card, my computer get frozen after starting Paris. And after a while, i will get blue screen.
Have you some screenshots, in wich way you install your eds and ribbons. I believe i have done all very well, but i am not sure !
Thx
Daniel
----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit
[Updated on: Sun, 03 August 2014 03:27] Report message to a moderator
|
|
|
|
|
|
|
Re: VirtuaVia expansion chassis (budget "Magmas") TESTED and WORKING with PARIS [message #109909 is a reply to message #109738] |
Thu, 10 December 2020 18:05 |
Rich.Kelley
Messages: 98 Registered: August 2009
|
Member |
|
|
Just in case anyone is reading this thread, my advice is to get a Magma 13 slot P13R or the 7 slot P7R4 on ebay, upgrade with quiet fans and a fanless power supply (like a Seasonic 600W Fanless Ti - $250 in 2020, so not cheap), and run on a totally modern, Windows 10 computer using Mike Audet's drivers. Runs great, you'll have access to all of the latest hardware, and you can run Reaper on the same system and that fills in some important holes that PARIS has.
Here's the detailed Magma info (c. early 2020) with part numbers:
********************************************
You want either the 13 slot P13R or the 7 slot P7R4. With the 13 slot you'll also need a card that goes into the Magma chassis: PCIEIF68. That's the card that the cable attaches to on the Magma end. For the 7 slot Magma the cable connection on the Magma side is part of the chassis.
Other Magma chassis' look similar but might not fit the EDS card. I know for sure that some don't fit. The EDS card uses one of the earlier standards for a PCI card.
The cable you need is either the 1 m long CBL1HF or the 1.5 m long CBL1.5HF.
For the host computer you can get either a PCI or a PCIe card.
- PCI - PCIHIF68 (very similar number to the 13 slot Magma side card)
- PCIe - PEHIFX1
I got both for flexibility.
You can buy new at One Stop Systems for $2500, or go used on ebay for $300-500. I had to buy all the parts separately, and get the cable new.
No drivers were necessary. XP and Windows 10 recognized the hardware.
[Updated on: Mon, 14 December 2020 08:59] Report message to a moderator
|
|
|
|
Goto Forum:
Current Time: Sun Dec 15 23:29:47 PST 2024
Total time taken to generate the page: 0.01451 seconds
|