Home » The PARIS Forums » PARIS: Classifieds » Trade my Scope Pulsar Pro 14 dsp card with 2 Pulsar II cards
| Trade my Scope Pulsar Pro 14 dsp card with 2 Pulsar II cards [message #54154] |
Tue, 01 May 2007 13:01  |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
by anyone) on same computer...
>Let me know if anyone has the two Pulsar II and wanna do this...
>regards,
>Dimitrios
>Hi Neil,
One of the candidates is the AKG mic if you wanna this included in the trade.
I have also a Paris output card, Paris input card, a Symetrix 8 channel limiter/compressor
named 488 Dynasqueeze.
I have already a sync plate don't know if I would need a second...:)
I may even consider (not sure right now !) a transient designer SPL device,
but with this is more than a pulsar card so maybe shipping both ways expenses
might be included and maybe the syncplate too if I decide to let it go and
you are in need of one.
I am tempted (hey DJ you know this feeling,right ?) because I have transient
designer under scope !
Regards,
Dimitrios
Neil" <IUOIU@OIU.com> wrote:
>
>Dimi, I have ONE Scope Prject Card (6 DSP SHARC chips) that I
>would consider tradng with you for something (or selling for
>cash). Do you have anything else to trade besides the Scope
>stuff at this time?
>
>I also have a Sync Plate, which I think you'd need if you're
>going
|
|
|
|
|
|
| Re: Trade my Scope Pulsar Pro 14 dsp card with 2 Pulsar II cards [message #54156 is a reply to message #54155] |
Tue, 01 May 2007 23:08  |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
@OIU.com> wrote:
>
>Dimi, I have ONE Scope Prject Card (6 DSP SHARC chips) that I
>would consider tradng with you for something (or selling for
>cash). Do you have anything else to trade besides the Scope
>stuff at this time?
>
>I also have a Sync Plate, which I think you'd need if you're
>going with more than one card - if I'm not mistaken.
>
>Neil
>
>
>"Dimitrios" <musurgio@otenetNOSPAM.gr> wrote:
>>
>>Hi,
>>If you already have two pulsar cards (for the shake of more dsps) and you
>>don't care much about the many adat ports (why not ?) the I trade my pulsar
>>Scope Pro card which has 14 dsps all on one card and you can transfer your
>>plugins (paying a fee to creamware for the transferring ) to the Pro card
>>(has no plugins !!).
>>If you leave me some basic plugins on the pulsars ( the ones you have double
>>because of the two you might have) then I can throw in the trade an AKG
>C562BL
>>microphone around 650$ new in grat condition !!
>>So why you wann do that ?
>>First you get two more dsps all on same card which does not need to share
>>amoung two cards your project you will get SDK the plugin BUILDER !! the
>>one with which I made my tube/tape emulator and which comes free from Creamware
>>ONLY if you have a PRO card and not even if you have 100 Pulsar II cards...
>>You get the free microphone ! and you pay the transfer fee for your plugins
>>to creamware for transferring them to my (your ) Pro card.
>>Why I do that ?
>>I need more ADATTTTTSSS ins and outs!!!!!
>>I will be building the 4 card (seldom even tried by anyone) on same computer...
>>Let me know if anyone has the two Pulsar II and wanna do this...
>>regards,
>>Dimitrios
>>
>Well, I don't think I need that mic or the Symetrix
compressor... is the SPL Transient Designer the 2-channel or
4-channel version?
Neil
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi Neil,
>One of the candidates is the AKG mic if you wanna this included in the trade.
>I have also a Paris output card, Paris input card, a Symetrix 8 channel
limiter/compressor
>named 488 Dynasqueeze.
>I have already a sync plate don't know if I would need a second...:)
>I may even consider (not sure right now !) a transient designer SPL device,
>but with this is more than a pulsar card so maybe shipping bot
|
|
|
|
|
|
| Re: Trade my Scope Pulsar Pro 14 dsp card with 2 Pulsar II cards [message #54158 is a reply to message #54156] |
Wed, 02 May 2007 18:35 |
Nil
Messages: 245
Registered: March 2007
|
Senior Member |
|
|
ring them to my (your ) Pro card.
>>>Why I do that ?
>>>I need more ADATTTTTSSS ins and outs!!!!!
>>>I will be building the 4 card (seldom even tried by anyone) on same computer...
>>>Let me know if anyone has the two Pulsar II and wanna do this...
>>>regards,
>>>Dimitrios
>>>
>>
>Hi Neil,
The Designer is the two channel.
You can keep the sync plate.
Regards,
Dimitrios
"Neil" <IUOIU@OIU.com> wrote:
>
>Well, I don't think I need that mic or the Symetrix
>compressor... is the SPL Transient Designer the 2-channel or
>4-channel version?
>
>Neil
>
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>
>>Hi Neil,
>>One of the candidates is the AKG mic if you wanna this included in the
trade.
>>I have also a Paris output card, Paris input card, a Symetrix 8 channel
>limiter/compressor
>>named 488 Dynasqueeze.
>>I have already a sync plate don't know if I would need a second...:)
>>I may even consider (not sure right now !) a transient designer SPL device,
>>but with this is more than a pulsar card so maybe shipping both ways expenses
>>might be included and maybe the syncplate too if I decide to let it go
and
>>you are in need of one.
>>I am tempted (hey DJ you know this feeling,right ?) because I have transient
>>designer under scope !
>>Regards,
>>Dimitrios
>>
>>Neil" <IUOIU@OIU.com> wrote:
>>>
>>>Dimi, I have ONE Scope Prject Card (6 DSP SHARC chips) that I
>>>would consider tradng with you for something (or selling for
>>>cash). Do you have anything else to trade besides the Scope
>>>stuff at this time?
>>>
>>>I also have a Sync Plate, which I think you'd need if you're
>>>going with more than one card - if I'm not mistaken.
>>>
>>>Neil
>>>
>>>
>>>"Dimitrios" <musurgio@otenetNOSPAM.gr> wrote:
>>>>
>>>>Hi,
>>>>If you already have two pulsar cards (for the shake of more dsps) and
>you
>>>>don't care much about the many adat ports (why not ?) the I trade my
pulsar
>>>>Scope Pro card which has 14 dsps all on one card and you can transfer
>your
>>>>plugins (paying a fee to creamware for the transferring ) to the Pro
>card
>>>>(has no plugins !!).
>>>>If you leave me some basic plugins on the pulsars ( the ones you have
>double
>>>>because of the two you might have) then I can throw in the trade an AKG
>>>C562BL
>>>>microphone around 650$ new in grat condition !!
>>>>So why you wann do that ?
>>>>
|
|
|
|
| Re: Trade my Scope Pulsar Pro 14 dsp card with 2 Pulsar II cards [message #54159 is a reply to message #54158] |
Thu, 03 May 2007 03:45 |
Dimitrios
Messages: 1056
Registered: August 2005
|
Senior Member |
|
|
First you get two more dsps all on same card which does not need to share
>>>>amoung two cards your project you will get SDK the plugin BUILDER !!
the
>>>>one with which I made my tube/tape emulator and which comes free from
>Creamware
>>>>ONLY if you have a PRO card and not even if you have 100 Pulsar II cards...
>>>>You get the free microphone ! and you pay the transfer fee for your plugins
>>>>to creamware for transferring them to my (your ) Pro card.
>>>>Why I do that ?
>>>>I need more ADATTTTTSSS ins and outs!!!!!
>>>>I will be building the 4 card (seldom even tried by anyone) on same computer...
>>>>Let me know if anyone has the two Pulsar II and wanna do this...
>>>>regards,
>>>>Dimitrios
>>>>
>>>
>>
>It's got the "Mix & Master" pack - no synths.
Neil
"Dimitrios" <musurgio@otenNOSPAMet.gr> wrote:
>
>Oh Neil,
>What plugins do come with pulsar card ?
>Regards,
>Dimitrios
>
>"Neil" <IUOIU@OIU.com> wrote:
>>
>>Dimi, I have ONE Scope Prject Card (6 DSP SHARC chips) that I
>>would consider tradng with you for something (or selling for
>>cash). Do you have anything else to trade besides the Scope
>>stuff at this time?
>>
>>I also have a Sync Plate, which I think you'd need if you're
>>going with more than one card - if I'm not mistaken.
>>
>>Neil
>>
>>
>>"Dimitrios" <musurgio@otenetNOSPAM.gr> wrote:
>>>
>>>Hi,
>>>If you already have two pulsar cards (for the shake of more dsps) and
you
>>>don't care much about the many adat ports (why not ?) the I trade my pulsar
>>>Scope Pro card which has 14 dsps all on one card and you can transfer
your
>>>plugins (paying a fee to creamware for the transferring ) to the Pro
card
>>>(has no plugins !!).
>>>If you leave me some basic plugins on the pulsars ( the ones you have
double
>>>because of the two you might have) then I can throw in the trade an AKG
>>C562BL
>>>microphone around 650$ new in grat condition !!
>>>So why you wann do that ?
>>>First you get two more dsps all on same card which does not need to share
>>>amoung two cards your project you will get SDK the plugin BUILDER !! the
>>>one with which I made my tube/tape emulator and which comes free from
Creamware
>>>ONLY if you have a PRO card and not even if you have 100 Pulsar II cards...
>>>You get the free microphone ! and you pay the transfer fee for your plugins
>>>to creamware for transferring them to my (your ) Pro card.
>>>Why I do that ?
>>>I need more ADATTTTTSSS ins and outs!!!!!
>>>I will be building the 4 card (seldom even tried by anyone) on same computer...
>>>Let me know if anyone has the two Pulsar II and wanna do this...
>>>regards,
>>>Dimitrios
>>>
>>
>OK, I notice that the 2-channel Transient Designer has a list
price of right at the same level as the Project card's street
price. Considering that, would you be willing to pay shipping
both ways for a straight-across trade for the Project Card &
the Transient Designer? AND... is the SPL unit that you have<
|
|
|
|
| Re: Trade my Scope Pulsar Pro 14 dsp card with 2 Pulsar II cards [message #54160 is a reply to message #54157] |
Thu, 03 May 2007 12:10 |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
br />
capable of switching between US & Euro voltages - which are the
ones I assume you use there in Greece?
Neil
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi Neil,
>The Designer is the two channel.
>You can keep the sync plate.
>Regards,
>Dimitrios
>
>
>"Neil" <IUOIU@OIU.com> wrote:
>>
>>Well, I don't think I need that mic or the Symetrix
>>compressor... is the SPL Transient Designer the 2-channel or
>>4-channel version?
>>
>>Neil
>>
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>
>>>Hi Neil,
>>>One of the candidates is the AKG mic if you wanna this included in the
>trade.
>>>I have also a Paris output card, Paris input card, a Symetrix 8 channel
>>limiter/compressor
>>>named 488 Dynasqueeze.
>>>I have already a sync plate don't know if I would need a second...:)
>>>I may even consider (not sure right now !) a transient designer SPL device,
>>>but with this is more than a pulsar card so maybe shipping both ways expenses
>>>might be included and maybe the syncplate too if I decide to let it go
>and
>>>you are in need of one.
>>>I am tempted (hey DJ you know this feeling,right ?) because I have transient
>>>designer under scope !
>>>Regards,
>>>Dimitrios
>>>
>>>Neil" <IUOIU@OIU.com> wrote:
>>>>
>>>>Dimi, I have ONE Scope Prject Card (6 DSP SHARC chips) that I
>>>>would consider tradng with you for something (or selling for
>>>>cash). Do you have anything else to trade besides the Scope
>>>>stuff at this time?
>>>>
>>>>I also have a Sync Plate, which I think you'd need if you're
>>>>going with more than one card - if I'm not mistaken.
>>>>
>>>>Neil
>>>>
>>>>
>>>>"Dimitrios" <musurgio@otenetNOSPAM.gr> wrote:
>>>>>
>>>>>Hi,
|
|
|
|
|
|
|
|
| Re: Trade my Scope Pulsar Pro 14 dsp card with 2 Pulsar II cards [message #54163 is a reply to message #54162] |
Mon, 07 May 2007 17:15 |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
plugin BUILDER !!
>the
>>>>>one with which I made my tube/tape emulator and which comes free from
>>Creamware
>>>>>ONLY if you have a PRO card and not even if you have 100 Pulsar II cards...
>>>>>You get the free microphone ! and you pay the transfer fee for your
plugins
>>>>>to creamware for transferring them to my (your ) Pro card.
>>>>>Why I do that ?
>>>>>I need more ADATTTTTSSS ins and outs!!!!!
>>>>>I will be building the 4 card (seldom even tried by anyone) on same
computer...
>>>>>Let me know if anyone has the two Pulsar II and wanna do this...
>>>>>regards,
>>>>>Dimitrios
>>>>>
>>>>
>>>
>>
>Hi Neil.
No offense here but I can get a used pulsar II for 350$ and Transient designer
used is sometimes more or selling at least at this price.
I would not ask for a direct trade if I knew the two goods are far apart
,BUT I respect your oppinion and thanks for talking...
Regards,
Dimitrios
"Neil" <OIUOIU@OIU.com> wrote:
>
>I don't think it's that fair of a trade if we're going straight
>across & each covering his own shipping - look at the retail &
>street prices of both items & you'll see what I mean.
>
>Neil
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>
>>So Neil,
>>Are you interested in a direct trade of the Pulsar II card and my Transient
>>designer device ?
>>Everyone pays his shiping expenses.
>>Regards,
>>Dimitrios
>>
>>"Neil" <OIUOIU@OIU.com> wrote:
>>>
>>>It's got the "Mix & Master" pack - no synths.
>>>
>>>Neil
>>>
>>>"Dimitrios" <musurgio@otenNOSPAMet.gr> wrote:
>>>>
>>>>Oh Neil,
>>>>What plugins do come with pulsar card ?
>>>>Regards,
>>>>Dimitrios
>>>>
>>>>"Neil" <IUOIU@OIU.com> wrote:
>>>>>
>>>>>Dimi, I have ONE Scope Prject Card (6 DSP SHARC chips) that I
>>>>>would consider tradng with you for something (or selling for
>>>>>cash). Do you have anything else to trade besides the Scope
>>>>>stuff at this time?
>>>>>
>>>>>I also have a Sync Plate, which I think you'd need if you're
>>>>>going with more than one card - if I'm not mistaken.
>>>>>
>>>>>Neil
>>>>>
>>>>>
>>>>>"Dimitrios" <musurgio@otenetNOSPAM.gr> wrote:
>>>>>>
>>>>>>Hi,
>>>>>>If you already have two pulsar cards (for the shake of more dsps) and
>>>you
>>>>>>don't care much about the many adat ports (why not ?) the I trade my
>>pulsar
>>>>>>Scope Pro card which has 14 dsps all on one card and you can transfer
>>>your
>>>>>>plugins (paying a fee to
|
|
|
|
|
|
Goto Forum:
Current Time: Fri Nov 29 23:39:21 PST 2024
Total time taken to generate the page: 0.02405 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
