The PARIS Forums


Home » The PARIS Forums » PARIS: Main » UAD headroom fix in Paris
UAD headroom fix in Paris [message #91198] Tue, 09 October 2007 13:53 Go to next message
Rod Lincoln is currently offline  Rod Lincoln
Messages: 883
Registered: September 2005
Senior Member
Hey you guys that use the UAD plugs in Paris. Are you tired of not having
enough headroom? Put the Paris native eq AFTER the UAD plug. The ugly KAK!
goed away and you can still push the plug to get some mojo out of it. Don't
turn anything down on the Paris plug, just have it sitting there. You can
also place it before the plug, but then you'll have to turn it down to lower
the input to the plug. If you place it after, it just acts like a big ole
sonic shock absorber.
Rod
Rod
Re: UAD headroom fix in Paris [message #91205 is a reply to message #91198] Tue, 09 October 2007 15:59 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
dude, that's sweet... danke for that lil' jewel!
AA

"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
news:470bea62$1@linux...
>
> Hey you guys that use the UAD plugs in Paris. Are you tired of not having
> enough headroom? Put the Paris native eq AFTER the UAD plug. The ugly KAK!
> goed away and you can still push the plug to get some mojo out of it.
> Don't
> turn anything down on the Paris plug, just have it sitting there. You can
> also place it before the plug, but then you'll have to turn it down to
> lower
> the input to the plug. If you place it after, it just acts like a big ole
> sonic shock absorber.
> Rod
> Rod
>
Re: UAD headroom fix in Paris [message #91206 is a reply to message #91198] Tue, 09 October 2007 15:57 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_0207_01C80AA6.4DF37970
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hey Rod,
Is this because the Paris EQ is getting whacked and liking it?
OR is it because the Paris native plug operates way low like in the EDS
situation with Paris in general? =20

I always have to throw a Waves 2 band in front of the Pultec to allow =
the=20
boosting I usually use there.

Waddaya think?
Tom=20
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
news:470bea62$1@linux...

Hey you guys that use the UAD plugs in Paris. Are you tired of not =
having
enough headroom? Put the Paris native eq AFTER the UAD plug. The ugly =
KAK!
goed away and you can still push the plug to get some mojo out of it. =
Don't
turn anything down on the Paris plug, just have it sitting there. You =
can
also place it before the plug, but then you'll have to turn it down to =
lower
the input to the plug. If you place it after, it just acts like a big =
ole
sonic shock absorber.
Rod
Rod



I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0207_01C80AA6.4DF37970
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hey Rod,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Is this because the Paris EQ is getting =
whacked and=20
liking it?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>OR is it because the Paris native plug =
operates way=20
low like in the EDS</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>situation with Paris in general?&nbsp;=20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I always have to throw a </FONT><FONT =
face=3DArial=20
size=3D2>Waves 2 band in front of the Pultec to allow the </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>boosting&nbsp;I usually </FONT><FONT =
face=3DArial=20
size=3D2>use there.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Waddaya think?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT>&nbsp;</DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Rod Lincoln" &lt;<A=20
=
href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
t;=20
wrote in message <A=20
=
href=3D"news:470bea62$1@linux">news:470bea62$1@linux</A>...</DIV><BR>Hey =
you=20
guys that use the UAD plugs in Paris. Are you tired of not =
having<BR>enough=20
headroom? Put the Paris native eq AFTER the UAD plug. The ugly =
KAK!<BR>goed=20
away and you can still push the plug to get some mojo out of it. =
Don't<BR>turn=20
anything down on the Paris plug, just have it sitting there. You =
can<BR>also=20
place it before the plug, but then you'll have to turn it down to =
lower<BR>the=20
input to the plug. If you place it after, it just acts like a big =
ole<BR>sonic=20
shock absorber.<BR>Rod<BR>Rod<BR></BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>&nbsp;&nbsp;&nbsp;</FONT></DIV></BODY ></HTML>

------=_NextPart_000_0207_01C80AA6.4DF37970--
Re: UAD headroom fix in Paris [message #91218 is a reply to message #91206] Tue, 09 October 2007 19:44 Go to previous messageGo to next message
Rod Lincoln is currently offline  Rod Lincoln
Messages: 883
Registered: September 2005
Senior Member
I don't know why. I suspect its because the Paris Native comp likes getting
whacked. It's a totally different vibe than putting something before the
UAD to limit the input. You can turn up the uad and get it working hard.

Rod
"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Hey Rod,
>Is this because the Paris EQ is getting whacked and liking it?
>OR is it because the Paris native plug operates way low like in the EDS
>situation with Paris in general? =20
>
>I always have to throw a Waves 2 band in front of the Pultec to allow =
>the=20
>boosting I usually use there.
>
>Waddaya think?
>Tom=20
> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message =
>news:470bea62$1@linux...
>
> Hey you guys that use the UAD plugs in Paris. Are you tired of not =
>having
> enough headroom? Put the Paris native eq AFTER the UAD plug. The ugly
=
>KAK!
> goed away and you can still push the plug to get some mojo out of it.
=
>Don't
> turn anything down on the Paris plug, just have it sitting there. You
=
>can
> also place it before the plug, but then you'll have to turn it down to
=
>lower
> the input to the plug. If you place it after, it just acts like a big
=
>ole
> sonic shock absorber.
> Rod
> Rod
>
>
>
>I choose Polesoft Lockspam to fight spam, and you?
>http://www.polesoft.com/refer.html
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Hey Rod,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Is this because the Paris EQ is getting
=
>whacked and=20
>liking it?</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>OR is it because the Paris native plug
=
>operates way=20
>low like in the EDS</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>situation with Paris in general? =20
></FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>I always have to throw a </FONT><FONT =
>face=3DArial=20
>size=3D2>Waves 2 band in front of the Pultec to allow the </FONT></DIV>
><DIV><FONT face=3DArial size=3D2>boosting I usually </FONT><FONT =
>face=3DArial=20
>size=3D2>use there.</FONT></DIV>
><DIV> </DIV>
><DIV><FONT face=3DArial size=3D2>Waddaya think?</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT> </DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Rod Lincoln" <<A=20
> =
>href=3D"mailto:rlincoln@nospam.kc.rr.com">rlincoln@nospam.kc.rr.com</A>&g=
>t;=20
> wrote in message <A=20
> =
>href=3D"news:470bea62$1@linux">news:470bea62$1@linux</A>...</DIV><BR>Hey
=
>you=20
> guys that use the UAD plugs in Paris. Are you tired of not =
>having<BR>enough=20
> headroom? Put the Paris native eq AFTER the UAD plug. The ugly =
>KAK!<BR>goed=20
> away and you can still push the plug to get some mojo out of it. =
>Don't<BR>turn=20
> anything down on the Paris plug, just have it sitting there. You =
>can<BR>also=20
> place it before the plug, but then you'll have to turn it down to =
>lower<BR>the=20
> input to the plug. If you place it after, it just acts like a big =
>ole<BR>sonic=20
> shock absorber.<BR>Rod<BR>Rod<BR></BLOCKQUOTE>
><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
>and=20
>you?<BR><A=20
>href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>.html</A>   </FONT></DIV></BODY></HTML>
>
>
Re: UAD headroom fix in Paris [message #91219 is a reply to message #91218] Tue, 09 October 2007 20:43 Go to previous messageGo to next message
neil[1] is currently offline  neil[1]
Messages: 164
Registered: October 2006
Senior Member
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>
>I don't know why. I suspect its because the Paris Native comp likes getting
>whacked. It's a totally different vibe than putting something before the
>UAD to limit the input. You can turn up the uad and get it working hard.

Honestly, it's because so many people when working in digital -
whether they've worked in analog prior or not - are SO focused
on "hitting it hard" & spanking this & spanking that, when
really in digital it's just the opposite.. shit just works
& sounds better when you BACK OFF just a bit.

Give ALL your inline processes some headroom - whether it's a
channel level or a plugin or a mix buss... and your stuff will
sound better. Paris kinda helps in this regard in that (like
Chuck reveaeld to us) zero is really -20, so that helps on one
inline gainstage, but with plugins in series, back off a hair &
don't try to run everything at maximum absolute zero & you'll
find a realm of clarity there, trust me!

Well, fuck it - don't trust me... try it & see for yourself!
lol

Neil
Re: UAD headroom fix in Paris [message #91223 is a reply to message #91219] Tue, 09 October 2007 21:47 Go to previous messageGo to next message
Rod Lincoln is currently offline  Rod Lincoln
Messages: 883
Registered: September 2005
Senior Member
Hey Neil, I appreciate the advice.
I can't remember if you use UAD stuff or not, but it seems like, as good
as they sound, one of their drawbacks is that they have a little less headroom
than some other native plugs, at least in Paris (I can't speak for other
DAWS). This is just a method I discovered, by accident, that helps you add
a little more eq on a pultec plug, or whatever, without kacking out, on a
track that may have been recorded hot.
The UAD Neve compressor has a +14 or whatever setting (can't remember and
I'm not looking at it right now)that allows you to push the plug into "coloration"
area's, like the hardware version. That's not really doable if you get the
digital kack that I get when I try it, unless I use the above trick.
I personally think Paris's strength is in allowing you to push things in
an "analog" way, to an extent, and sound good. It certianly isn't in editing
or vsti's at this point.
Rod
"Neil" <IOUOIU@OIU.com> wrote:
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>>
>>I don't know why. I suspect its because the Paris Native comp likes getting
>>whacked. It's a totally different vibe than putting something before the
>>UAD to limit the input. You can turn up the uad and get it working hard.
>
>Honestly, it's because so many people when working in digital -
>whether they've worked in analog prior or not - are SO focused
>on "hitting it hard" & spanking this & spanking that, when
>really in digital it's just the opposite.. shit just works
>& sounds better when you BACK OFF just a bit.
>
>Give ALL your inline processes some headroom - whether it's a
>channel level or a plugin or a mix buss... and your stuff will
>sound better. Paris kinda helps in this regard in that (like
>Chuck reveaeld to us) zero is really -20, so that helps on one
>inline gainstage, but with plugins in series, back off a hair &
>don't try to run everything at maximum absolute zero & you'll
>find a realm of clarity there, trust me!
>
>Well, fuck it - don't trust me... try it & see for yourself!
>lol
>
>Neil
Re: UAD headroom fix in Paris [message #91231 is a reply to message #91223] Wed, 10 October 2007 05:23 Go to previous messageGo to next message
Neil is currently offline  Neil
Messages: 1645
Registered: April 2006
Senior Member
Hey there Rod - No I don't have any of the UAD stuff, but I was
really referring to plugins in general - I wasn't aware that
the UAD stuff is apparently even more sensitive than the norm
when it comes to overloads. Have you tried sticking a simple
gain plugin either in front of, or in back of (depending on
where the overload is comng from) that Neve Comp & THEN try
dialing in the amount of coloration you want, then readjust
your gain levels to just below where the clipping comes back in?
That might be all it needs... Here are a couple free ones:

http://www.sonalksis.com/index.php?section_id=99

http://www.gvst.co.uk/ggain.htm

Neil





"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>
>Hey Neil, I appreciate the advice.
>I can't remember if you use UAD stuff or not, but it seems like, as good
>as they sound, one of their drawbacks is that they have a little less headroom
>than some other native plugs, at least in Paris (I can't speak for other
>DAWS). This is just a method I discovered, by accident, that helps you add
>a little more eq on a pultec plug, or whatever, without kacking out, on
a
>track that may have been recorded hot.
>The UAD Neve compressor has a +14 or whatever setting (can't remember and
>I'm not looking at it right now)that allows you to push the plug into "coloration"
>area's, like the hardware version. That's not really doable if you get the
>digital kack that I get when I try it, unless I use the above trick.
>I personally think Paris's strength is in allowing you to push things in
>an "analog" way, to an extent, and sound good. It certianly isn't in editing
>or vsti's at this point.
>Rod
>"Neil" <IOUOIU@OIU.com> wrote:
>>
>>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>>>
>>>I don't know why. I suspect its because the Paris Native comp likes getting
>>>whacked. It's a totally different vibe than putting something before the
>>>UAD to limit the input. You can turn up the uad and get it working hard.
>>
>>Honestly, it's because so many people when working in digital -
>>whether they've worked in analog prior or not - are SO focused
>>on "hitting it hard" & spanking this & spanking that, when
>>really in digital it's just the opposite.. shit just works
>>& sounds better when you BACK OFF just a bit.
>>
>>Give ALL your inline processes some headroom - whether it's a
>>channel level or a plugin or a mix buss... and your stuff will
>>sound better. Paris kinda helps in this regard in that (like
>>Chuck reveaeld to us) zero is really -20, so that helps on one
>>inline gainstage, but with plugins in series, back off a hair &
>>don't try to run everything at maximum absolute zero & you'll
>>find a realm of clarity there, trust me!
>>
>>Well, fuck it - don't trust me... try it & see for yourself!
>>lol
>>
>>Neil
>
Re: UAD headroom fix in Paris [message #91233 is a reply to message #91231] Wed, 10 October 2007 05:53 Go to previous messageGo to next message
Rod Lincoln is currently offline  Rod Lincoln
Messages: 883
Registered: September 2005
Senior Member
Have you tried sticking a simple
>gain plugin either in front of, or in back of (depending on
>where the overload is comng from) that Neve Comp & THEN try
>dialing in the amount of coloration you want

That's what my original post referred to. Put the Paris native eq after the
UAD, except you don't have to gain down, just let it set there.
Rod
Re: UAD headroom fix in Paris [message #91239 is a reply to message #91233] Wed, 10 October 2007 07:11 Go to previous messageGo to next message
IOOIU is currently offline  IOOIU
Messages: 13
Registered: December 2006
Junior Member
"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>
>Have you tried sticking a simple
>>gain plugin either in front of, or in back of (depending on
>>where the overload is comng from) that Neve Comp & THEN try
>>dialing in the amount of coloration you want
>
>That's what my original post referred to. Put the Paris native eq after
the
>UAD, except you don't have to gain down, just let it set there.
>Rod
>

AH! I must've missed the original one in the thread, I guess.
Sorry to be redundant, in that case.

Neil
Re: UAD headroom fix in Paris [message #91256 is a reply to message #91231] Wed, 10 October 2007 17:03 Go to previous message
Cujjo is currently offline  Cujjo   
Messages: 325
Registered: June 2007
Senior Member
I put an RCL up before the UAD plug and just turn down the output on the RCL
if it is an issue...not on drums of course as that is a whole other can of
woims


"Neil" <OIOIU@OIU.com> wrote:
>
>Hey there Rod - No I don't have any of the UAD stuff, but I was
>really referring to plugins in general - I wasn't aware that
>the UAD stuff is apparently even more sensitive than the norm
>when it comes to overloads. Have you tried sticking a simple
>gain plugin either in front of, or in back of (depending on
>where the overload is comng from) that Neve Comp & THEN try
>dialing in the amount of coloration you want, then readjust
>your gain levels to just below where the clipping comes back in?
>That might be all it needs... Here are a couple free ones:
>
>http://www.sonalksis.com/index.php?section_id=99
>
>http://www.gvst.co.uk/ggain.htm
>
>Neil
>
>
>
>
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>>
>>Hey Neil, I appreciate the advice.
>>I can't remember if you use UAD stuff or not, but it seems like, as good
>>as they sound, one of their drawbacks is that they have a little less headroom
>>than some other native plugs, at least in Paris (I can't speak for other
>>DAWS). This is just a method I discovered, by accident, that helps you
add
>>a little more eq on a pultec plug, or whatever, without kacking out, on
>a
>>track that may have been recorded hot.
>>The UAD Neve compressor has a +14 or whatever setting (can't remember and
>>I'm not looking at it right now)that allows you to push the plug into "coloration"
>>area's, like the hardware version. That's not really doable if you get
the
>>digital kack that I get when I try it, unless I use the above trick.
>>I personally think Paris's strength is in allowing you to push things in
>>an "analog" way, to an extent, and sound good. It certianly isn't in editing
>>or vsti's at this point.
>>Rod
>>"Neil" <IOUOIU@OIU.com> wrote:
>>>
>>>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>>>>
>>>>I don't know why. I suspect its because the Paris Native comp likes getting
>>>>whacked. It's a totally different vibe than putting something before
the
>>>>UAD to limit the input. You can turn up the uad and get it working hard.
>>>
>>>Honestly, it's because so many people when working in digital -
>>>whether they've worked in analog prior or not - are SO focused
>>>on "hitting it hard" & spanking this & spanking that, when
>>>really in digital it's just the opposite.. shit just works
>>>& sounds better when you BACK OFF just a bit.
>>>
>>>Give ALL your inline processes some headroom - whether it's a
>>>channel level or a plugin or a mix buss... and your stuff will
>>>sound better. Paris kinda helps in this regard in that (like
>>>Chuck reveaeld to us) zero is really -20, so that helps on one
>>>inline gainstage, but with plugins in series, back off a hair &
>>>don't try to run everything at maximum absolute zero & you'll
>>>find a realm of clarity there, trust me!
>>>
>>>Well, fuck it - don't trust me... try it & see for yourself!
>>>lol
>>>
>>>Neil
>>
>
Previous Topic: *******PARIS Compressor Released plus updates*******
Next Topic: Sometimes it really pays to be a geek
Goto Forum:
  


Current Time: Thu Dec 05 03:49:13 PST 2024

Total time taken to generate the page: 0.01167 seconds