Home » The PARIS Forums » PARIS: Main » Plextor CD writer...can't CD text to work, any answers?
| Plextor CD writer...can't CD text to work, any answers? [message #101017] |
Mon, 10 November 2008 22:44  |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
I'm completing a project that I'm mixing and also mastering. I'm trying to
put CD text on the CD but I can't get it to work. I've got a Plextor Plexwriter
Premium. It says it's CD text capable. I'm using wavelab 4.0 and have typed
in the CD text.
When I burn the CD there's no text. Also, when I click on the infor for the
Plextor the "allows CD text" box is not checked, and it won't allow me to
check it. I noticed that (after doing some google searching) that when I
try to rip a commercial CD that has CD text (checked it with another computer)
it won't display the text. Has anyone here had this experience with Plextors
or have any knowledge about this in general? Does it have anything to do
with CDDB?
Thanks
Rod
|
|
|
|
|
|
|
|
|
|
| Re: Plextor CD writer...can't CD text to work, any answers? [message #101022 is a reply to message #101021] |
Tue, 11 November 2008 14:12  |
Erling
Messages: 156
Registered: October 2008
|
Senior Member |
|
|
I have had the same burner for years and have no problems at all.
Burned projects in Wavelab Essential and Essential 6 and tested the
CD's with Plextools for problems. CD text have allways showed up. In
Plextools you can also see what features the Plextor burner have. It
will show up if the cd-text can be burned. If not, I think the burner
have a problem.
Erling
On 12 Nov 2008 08:00:33 +1000, "Rod Lincoln"
<rlincoln@nospam.kc.rr.com> wrote:
>
>Hi Chris, It's the Plexwriter Premium. That's all I can find in the way of
>model information. Under model number, it says "Premium" I got it in 2003,
>so it's not newer version 2, it's the older one.
>Rod
>Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>HI Rod,
>>Whats the exact model of the drive?
>>
>>Chris
>>
>>Rod Lincoln wrote:
>>> I'm completing a project that I'm mixing and also mastering. I'm trying
>to
>>> put CD text on the CD but I can't get it to work. I've got a Plextor Plexwriter
>>> Premium. It says it's CD text capable. I'm using wavelab 4.0 and have
>typed
>>> in the CD text.
>>> When I burn the CD there's no text. Also, when I click on the infor for
>the
>>> Plextor the "allows CD text" box is not checked, and it won't allow me
>to
>>> check it. I noticed that (after doing some google searching) that when
>I
>>> try to rip a commercial CD that has CD text (checked it with another computer)
>>> it won't display the text. Has anyone here had this experience with Plextors
>>> or have any knowledge about this in general? Does it have anything to
>do
>>> with CDDB?
>>> Thanks
>>> Rod
>>
>>--
>>Chris Ludwig
>>
>>ADK Pro Audio
>>(859) 635-5762
>>www.adkproaudio.com
>>chrisl@adkproaudio.com
|
|
|
|
| Re: Plextor CD writer...can't CD text to work, any answers? [message #101023 is a reply to message #101022] |
Tue, 11 November 2008 15:40 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
So you have a Plextor Premium on a pc with Wavelab, and you have no problem
burning CD's with text?
Erling <erling.lovik@lyse.net> wrote:
>I have had the same burner for years and have no problems at all.
>Burned projects in Wavelab Essential and Essential 6 and tested the
>CD's with Plextools for problems. CD text have allways showed up. In
>Plextools you can also see what features the Plextor burner have. It
>will show up if the cd-text can be burned. If not, I think the burner
>have a problem.
>
>Erling
>
>On 12 Nov 2008 08:00:33 +1000, "Rod Lincoln"
><rlincoln@nospam.kc.rr.com> wrote:
>
>>
>>Hi Chris, It's the Plexwriter Premium. That's all I can find in the way
of
>>model information. Under model number, it says "Premium" I got it in 2003,
>>so it's not newer version 2, it's the older one.
>>Rod
>>Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>>HI Rod,
>>>Whats the exact model of the drive?
>>>
>>>Chris
>>>
>>>Rod Lincoln wrote:
>>>> I'm completing a project that I'm mixing and also mastering. I'm trying
>>to
>>>> put CD text on the CD but I can't get it to work. I've got a Plextor
Plexwriter
>>>> Premium. It says it's CD text capable. I'm using wavelab 4.0 and have
>>typed
>>>> in the CD text.
>>>> When I burn the CD there's no text. Also, when I click on the infor
for
>>the
>>>> Plextor the "allows CD text" box is not checked, and it won't allow
me
>>to
>>>> check it. I noticed that (after doing some google searching) that when
>>I
>>>> try to rip a commercial CD that has CD text (checked it with another
computer)
>>>> it won't display the text. Has anyone here had this experience with
Plextors
>>>> or have any knowledge about this in general? Does it have anything to
>>do
>>>> with CDDB?
>>>> Thanks
>>>> Rod
>>>
>>>--
>>>Chris Ludwig
>>>
>>>ADK Pro Audio
>>>(859) 635-5762
>>>www.adkproaudio.com
>>>chrisl@adkproaudio.com
|
|
|
|
| Re: Plextor CD writer...can't CD text to work, any answers? [message #101024 is a reply to message #101021] |
Tue, 11 November 2008 15:38 |
Chris Ludwig
Messages: 868
Registered: May 2006
|
Senior Member |
|
|
HI Rod,
Confirm which firmware you are using on the drive.
I think you can do this in Wavelabs CD info page. If not then use Nero's info Tool to do it.
ftp://ftp6.nero.com/tools/InfoTool.zip
If you firmware is lower than version 1.07 then you should update it.
http://www.plextor.com/english/support/downloads/Premium_107 .exe
If that doesn't work then make sure you are using the most recent WL4 update.
ftp://ftp.steinberg.net/Download/WaveLab/4.0.1.B/Pc/WaveLab_ 401b_Patch.zip
Chris
Rod Lincoln wrote:
> Hi Chris, It's the Plexwriter Premium. That's all I can find in the way of
> model information. Under model number, it says "Premium" I got it in 2003,
> so it's not newer version 2, it's the older one.
> Rod
> Chris Ludwig <chrisl@adkproaudio.com> wrote:
>> HI Rod,
>> Whats the exact model of the drive?
>>
>> Chris
>>
>> Rod Lincoln wrote:
>>> I'm completing a project that I'm mixing and also mastering. I'm trying
> to
>>> put CD text on the CD but I can't get it to work. I've got a Plextor Plexwriter
>>> Premium. It says it's CD text capable. I'm using wavelab 4.0 and have
> typed
>>> in the CD text.
>>> When I burn the CD there's no text. Also, when I click on the infor for
> the
>>> Plextor the "allows CD text" box is not checked, and it won't allow me
> to
>>> check it. I noticed that (after doing some google searching) that when
> I
>>> try to rip a commercial CD that has CD text (checked it with another computer)
>>> it won't display the text. Has anyone here had this experience with Plextors
>>> or have any knowledge about this in general? Does it have anything to
> do
>>> with CDDB?
>>> Thanks
>>> Rod
>> --
>> Chris Ludwig
>>
>> ADK Pro Audio
>> (859) 635-5762
>> www.adkproaudio.com
>> chrisl@adkproaudio.com
>
--
Chris Ludwig
ADK Pro Audio
(859) 635-5762
www.adkproaudio.com
chrisl@adkproaudio.com
|
|
|
|
| Re: Plextor CD writer...can't CD text to work, any answers? [message #101025 is a reply to message #101017] |
Tue, 11 November 2008 17:31 |
"tedgerber
Messages: 1
Registered: November 2008
|
Junior Member |
|
|
"Rod Lincoln" <rlincoln@nospam.kc.r.com> wrote:
I noticed that (after doing some google searching) that when I
>try to rip a commercial CD that has CD text (checked it with another computer)
>it won't display the text. Has anyone here had this experience with Plextors
>or have any knowledge about this in general? Does it have anything to do
>with CDDB?
>Thanks
>Rod
CD Text and Track/artist/album info that displays on a computer are two different
things. The latter is generated by CDDB, or freedb which is an internet database
that compiles song and artist info. When a disc is loaded in a computer,
the host program (iTunes for instance) will look for Track info, by comparing
the data of the disc just loaded with profiles of discs already in the database.
It compares things like number and length of tracks. If you have a disc that
you want profiled in the database, enter all the info in your host program,
then "submit track names" under advanced in iTunes. This will mean that anytime
that disc is inserted by anyone, anywhere into a computer connected to the
web, all the track/artist/album info will be available to the user.
CD text usually contains similar info to CDDB, but it is displayed on hardware
units, like dedicated set top disc players
and car stereos. It normally would not display on a computer.
I think...
Ted
see if the
|
|
|
|
| Re: Plextor CD writer...can't CD text to work, any answers? [message #101029 is a reply to message #101023] |
Wed, 12 November 2008 01:31 |
Erling
Messages: 156
Registered: October 2008
|
Senior Member |
|
|
As I've said. Used it for years. Now I'm using Plextor PX-755 too.
Have you anytime upgraded the firmware for the burner?
If not, go here:
http://www.plextor.com/english/support/support_downloads.htm l#firm
and download and install the last firmware for the burner, to see if
that will help. You can also see if you have the last Wavelab CD/DVD
recorder updates for PC Windows here:
http://www.steinberg.net/en/support/steinberg_support_downlo ads.html
Hope some of these things will help you and good luck.
By the way, Plextool is a really strong product to both burn and
afterwards control the quality of the Plextor burnings. I know Brian T
was one of the first here to use that burner with Plextools. He wrotes
much about it here, so much that I buied the burner too. Do you still
have the CD with the software, following with the Plexwriter Premium
buying?
Erling
On 12 Nov 2008 09:40:12 +1000, "Rod Lincoln"
<rlincoln@nospam.kc.rr.com> wrote:
>
>So you have a Plextor Premium on a pc with Wavelab, and you have no problem
>burning CD's with text?
>Erling <erling.lovik@lyse.net> wrote:
>>I have had the same burner for years and have no problems at all.
>>Burned projects in Wavelab Essential and Essential 6 and tested the
>>CD's with Plextools for problems. CD text have allways showed up. In
>>Plextools you can also see what features the Plextor burner have. It
>>will show up if the cd-text can be burned. If not, I think the burner
>>have a problem.
>>
>>Erling
>>
>>On 12 Nov 2008 08:00:33 +1000, "Rod Lincoln"
>><rlincoln@nospam.kc.rr.com> wrote:
>>
>>>
>>>Hi Chris, It's the Plexwriter Premium. That's all I can find in the way
>of
>>>model information. Under model number, it says "Premium" I got it in 2003,
>>>so it's not newer version 2, it's the older one.
>>>Rod
>>>Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>>>HI Rod,
>>>>Whats the exact model of the drive?
>>>>
>>>>Chris
>>>>
>>>>Rod Lincoln wrote:
>>>>> I'm completing a project that I'm mixing and also mastering. I'm trying
>>>to
>>>>> put CD text on the CD but I can't get it to work. I've got a Plextor
>Plexwriter
>>>>> Premium. It says it's CD text capable. I'm using wavelab 4.0 and have
>>>typed
>>>>> in the CD text.
>>>>> When I burn the CD there's no text. Also, when I click on the infor
>for
>>>the
>>>>> Plextor the "allows CD text" box is not checked, and it won't allow
>me
>>>to
>>>>> check it. I noticed that (after doing some google searching) that when
>>>I
>>>>> try to rip a commercial CD that has CD text (checked it with another
>computer)
>>>>> it won't display the text. Has anyone here had this experience with
>Plextors
>>>>> or have any knowledge about this in general? Does it have anything to
>>>do
>>>>> with CDDB?
>>>>> Thanks
>>>>> Rod
>>>>
>>>>--
>>>>Chris Ludwig
>>>>
>>>>ADK Pro Audio
>>>>(859) 635-5762
>>>>www.adkproaudio.com
>>>>chrisl@adkproaudio.com
|
|
|
|
| Re: Plextor CD writer...can't CD text to work, any answers? [message #101030 is a reply to message #101023] |
Wed, 12 November 2008 02:17 |
Erling
Messages: 156
Registered: October 2008
|
Senior Member |
|
|
I've just tested an audioCD burned with Wavelab Essential 6 on one of
my other computers, with an Optiarc AD-7200S burner. Now it's playing
on the computer with Plextor/Plextools in Plextools. The CD-text are
showing up everything from the CD that was written in Wavelab on the
other computer. These things are not showing up at all in Windows
Media Player, as far as I can find out.
Someone who knows how to get CD-text to show up in Win MediaPlayer?
Erling
On 12 Nov 2008 09:40:12 +1000, "Rod Lincoln"
<rlincoln@nospam.kc.rr.com> wrote:
>
>So you have a Plextor Premium on a pc with Wavelab, and you have no problem
>burning CD's with text?
>Erling <erling.lovik@lyse.net> wrote:
>>I have had the same burner for years and have no problems at all.
>>Burned projects in Wavelab Essential and Essential 6 and tested the
>>CD's with Plextools for problems. CD text have allways showed up. In
>>Plextools you can also see what features the Plextor burner have. It
>>will show up if the cd-text can be burned. If not, I think the burner
>>have a problem.
>>
>>Erling
>>
>>On 12 Nov 2008 08:00:33 +1000, "Rod Lincoln"
>><rlincoln@nospam.kc.rr.com> wrote:
>>
>>>
>>>Hi Chris, It's the Plexwriter Premium. That's all I can find in the way
>of
>>>model information. Under model number, it says "Premium" I got it in 2003,
>>>so it's not newer version 2, it's the older one.
>>>Rod
>>>Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>>>HI Rod,
>>>>Whats the exact model of the drive?
>>>>
>>>>Chris
>>>>
>>>>Rod Lincoln wrote:
>>>>> I'm completing a project that I'm mixing and also mastering. I'm trying
>>>to
>>>>> put CD text on the CD but I can't get it to work. I've got a Plextor
>Plexwriter
>>>>> Premium. It says it's CD text capable. I'm using wavelab 4.0 and have
>>>typed
>>>>> in the CD text.
>>>>> When I burn the CD there's no text. Also, when I click on the infor
>for
>>>the
>>>>> Plextor the "allows CD text" box is not checked, and it won't allow
>me
>>>to
>>>>> check it. I noticed that (after doing some google searching) that when
>>>I
>>>>> try to rip a commercial CD that has CD text (checked it with another
>computer)
>>>>> it won't display the text. Has anyone here had this experience with
>Plextors
>>>>> or have any knowledge about this in general? Does it have anything to
>>>do
>>>>> with CDDB?
>>>>> Thanks
>>>>> Rod
>>>>
>>>>--
>>>>Chris Ludwig
>>>>
>>>>ADK Pro Audio
>>>>(859) 635-5762
>>>>www.adkproaudio.com
>>>>chrisl@adkproaudio.com
|
|
|
|
| Re: Plextor CD writer...can't CD text to work, any answers? [message #101032 is a reply to message #101029] |
Wed, 12 November 2008 07:05 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
Thanks, yes, I bought the Plextor because of Brian T also. Never any problems,
but I've never tried to burn CD txt before now. I emailed plextor tech support,
and the said wavelab didn't fully support the plextor drive. Now that you
tell me you've been using it with wavelab essentials, I think that was BS.
I havn't upgraded the firmware for a few years. It's 1.02 or something like
that. One thing that concerns me is it looks like that's the firmware for
the Premuim-U, which I think is the usb version. I have the premuum internal.
There doesn't seem to be any updates beyond 1.02 for the internal. Chris
Ludwig posted the same links for Plextor and Wavelab. I haven't installed
the updates yet , but will try to get it done today.
Rod
Erling <erling.lovik@lyse.net> wrote:
>As I've said. Used it for years. Now I'm using Plextor PX-755 too.
>Have you anytime upgraded the firmware for the burner?
>If not, go here:
> http://www.plextor.com/english/support/support_downloads.htm l#firm
>
>and download and install the last firmware for the burner, to see if
>that will help. You can also see if you have the last Wavelab CD/DVD
>recorder updates for PC Windows here:
> http://www.steinberg.net/en/support/steinberg_support_downlo ads.html
>
>Hope some of these things will help you and good luck.
>
>By the way, Plextool is a really strong product to both burn and
>afterwards control the quality of the Plextor burnings. I know Brian T
>was one of the first here to use that burner with Plextools. He wrotes
>much about it here, so much that I buied the burner too. Do you still
>have the CD with the software, following with the Plexwriter Premium
>buying?
>
>Erling
>
>On 12 Nov 2008 09:40:12 +1000, "Rod Lincoln"
><rlincoln@nospam.kc.rr.com> wrote:
>
>>
>>So you have a Plextor Premium on a pc with Wavelab, and you have no problem
>>burning CD's with text?
>>Erling <erling.lovik@lyse.net> wrote:
>>>I have had the same burner for years and have no problems at all.
>>>Burned projects in Wavelab Essential and Essential 6 and tested the
>>>CD's with Plextools for problems. CD text have allways showed up. In
>>>Plextools you can also see what features the Plextor burner have. It
>>>will show up if the cd-text can be burned. If not, I think the burner
>>>have a problem.
>>>
>>>Erling
>>>
>>>On 12 Nov 2008 08:00:33 +1000, "Rod Lincoln"
>>><rlincoln@nospam.kc.rr.com> wrote:
>>>
>>>>
>>>>Hi Chris, It's the Plexwriter Premium. That's all I can find in the way
>>of
>>>>model information. Under model number, it says "Premium" I got it in
2003,
>>>>so it's not newer version 2, it's the older one.
>>>>Rod
>>>>Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>>>>HI Rod,
>>>>>Whats the exact model of the drive?
>>>>>
>>>>>Chris
>>>>>
>>>>>Rod Lincoln wrote:
>>>>>> I'm completing a project that I'm mixing and also mastering. I'm trying
>>>>to
>>>>>> put CD text on the CD but I can't get it to work. I've got a Plextor
>>Plexwriter
>>>>>> Premium. It says it's CD text capable. I'm using wavelab 4.0 and have
>>>>typed
>>>>>> in the CD text.
>>>>>> When I burn the CD there's no text. Also, when I click on the infor
>>for
>>>>the
>>>>>> Plextor the "allows CD text" box is not checked, and it won't allow
>>me
>>>>to
>>>>>> check it. I noticed that (after doing some google searching) that
when
>>>>I
>>>>>> try to rip a commercial CD that has CD text (checked it with another
>>computer)
>>>>>> it won't display the text. Has anyone here had this experience with
>>Plextors
>>>>>> or have any knowledge about this in general? Does it have anything
to
>>>>do
>>>>>> with CDDB?
>>>>>> Thanks
>>>>>> Rod
>>>>>
>>>>>--
>>>>>Chris Ludwig
>>>>>
>>>>>ADK Pro Audio
>>>>>(859) 635-5762
>>>>>www.adkproaudio.com
>>>>>chrisl@adkproaudio.com
|
|
|
|
| Re: Plextor CD writer...can't CD text to work, any answers? [message #101033 is a reply to message #101030] |
Wed, 12 November 2008 07:08 |
Rod Lincoln
Messages: 883
Registered: September 2005
|
Senior Member |
|
|
Read the post by Ted Gerber at the bottom of this thread. It appears that
windows media player, and maybe itunes also, gets the track info from CDDB
or fredb instead of CD text.
Rod
Erling <erling.lovik@lyse.net> wrote:
>
>I've just tested an audioCD burned with Wavelab Essential 6 on one of
>my other computers, with an Optiarc AD-7200S burner. Now it's playing
>on the computer with Plextor/Plextools in Plextools. The CD-text are
>showing up everything from the CD that was written in Wavelab on the
>other computer. These things are not showing up at all in Windows
>Media Player, as far as I can find out.
>
>Someone who knows how to get CD-text to show up in Win MediaPlayer?
>
>Erling
>
>
>On 12 Nov 2008 09:40:12 +1000, "Rod Lincoln"
><rlincoln@nospam.kc.rr.com> wrote:
>
>>
>>So you have a Plextor Premium on a pc with Wavelab, and you have no problem
>>burning CD's with text?
>>Erling <erling.lovik@lyse.net> wrote:
>>>I have had the same burner for years and have no problems at all.
>>>Burned projects in Wavelab Essential and Essential 6 and tested the
>>>CD's with Plextools for problems. CD text have allways showed up. In
>>>Plextools you can also see what features the Plextor burner have. It
>>>will show up if the cd-text can be burned. If not, I think the burner
>>>have a problem.
>>>
>>>Erling
>>>
>>>On 12 Nov 2008 08:00:33 +1000, "Rod Lincoln"
>>><rlincoln@nospam.kc.rr.com> wrote:
>>>
>>>>
>>>>Hi Chris, It's the Plexwriter Premium. That's all I can find in the way
>>of
>>>>model information. Under model number, it says "Premium" I got it in
2003,
>>>>so it's not newer version 2, it's the older one.
>>>>Rod
>>>>Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>>>>HI Rod,
>>>>>Whats the exact model of the drive?
>>>>>
>>>>>Chris
>>>>>
>>>>>Rod Lincoln wrote:
>>>>>> I'm completing a project that I'm mixing and also mastering. I'm trying
>>>>to
>>>>>> put CD text on the CD but I can't get it to work. I've got a Plextor
>>Plexwriter
>>>>>> Premium. It says it's CD text capable. I'm using wavelab 4.0 and have
>>>>typed
>>>>>> in the CD text.
>>>>>> When I burn the CD there's no text. Also, when I click on the infor
>>for
>>>>the
>>>>>> Plextor the "allows CD text" box is not checked, and it won't allow
>>me
>>>>to
>>>>>> check it. I noticed that (after doing some google searching) that
when
>>>>I
>>>>>> try to rip a commercial CD that has CD text (checked it with another
>>computer)
>>>>>> it won't display the text. Has anyone here had this experience with
>>Plextors
>>>>>> or have any knowledge about this in general? Does it have anything
to
>>>>do
>>>>>> with CDDB?
>>>>>> Thanks
>>>>>> Rod
>>>>>
>>>>>--
>>>>>Chris Ludwig
>>>>>
>>>>>ADK Pro Audio
>>>>>(859) 635-5762
>>>>>www.adkproaudio.com
>>>>>chrisl@adkproaudio.com
|
|
|
|
| Re: Plextor CD writer...can't CD text to work, any answers? [message #101035 is a reply to message #101033] |
Wed, 12 November 2008 06:45 |
Erling
Messages: 156
Registered: October 2008
|
Senior Member |
|
|
Hmm... Nero player have no problems to show the CD-text
information...hmmm
On 13 Nov 2008 01:08:33 +1000, "Rod Lincoln"
<rlincoln@nospam.kc.rr.com> wrote:
>
>Read the post by Ted Gerber at the bottom of this thread. It appears that
>windows media player, and maybe itunes also, gets the track info from CDDB
>or fredb instead of CD text.
>Rod
>Erling <erling.lovik@lyse.net> wrote:
>>
>>I've just tested an audioCD burned with Wavelab Essential 6 on one of
>>my other computers, with an Optiarc AD-7200S burner. Now it's playing
>>on the computer with Plextor/Plextools in Plextools. The CD-text are
>>showing up everything from the CD that was written in Wavelab on the
>>other computer. These things are not showing up at all in Windows
>>Media Player, as far as I can find out.
>>
>>Someone who knows how to get CD-text to show up in Win MediaPlayer?
>>
>>Erling
>>
>>
>>On 12 Nov 2008 09:40:12 +1000, "Rod Lincoln"
>><rlincoln@nospam.kc.rr.com> wrote:
>>
>>>
>>>So you have a Plextor Premium on a pc with Wavelab, and you have no problem
>>>burning CD's with text?
>>>Erling <erling.lovik@lyse.net> wrote:
>>>>I have had the same burner for years and have no problems at all.
>>>>Burned projects in Wavelab Essential and Essential 6 and tested the
>>>>CD's with Plextools for problems. CD text have allways showed up. In
>>>>Plextools you can also see what features the Plextor burner have. It
>>>>will show up if the cd-text can be burned. If not, I think the burner
>>>>have a problem.
>>>>
>>>>Erling
>>>>
>>>>On 12 Nov 2008 08:00:33 +1000, "Rod Lincoln"
>>>><rlincoln@nospam.kc.rr.com> wrote:
>>>>
>>>>>
>>>>>Hi Chris, It's the Plexwriter Premium. That's all I can find in the way
>>>of
>>>>>model information. Under model number, it says "Premium" I got it in
>2003,
>>>>>so it's not newer version 2, it's the older one.
>>>>>Rod
>>>>>Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>>>>>HI Rod,
>>>>>>Whats the exact model of the drive?
>>>>>>
>>>>>>Chris
>>>>>>
>>>>>>Rod Lincoln wrote:
>>>>>>> I'm completing a project that I'm mixing and also mastering. I'm trying
>>>>>to
>>>>>>> put CD text on the CD but I can't get it to work. I've got a Plextor
>>>Plexwriter
>>>>>>> Premium. It says it's CD text capable. I'm using wavelab 4.0 and have
>>>>>typed
>>>>>>> in the CD text.
>>>>>>> When I burn the CD there's no text. Also, when I click on the infor
>>>for
>>>>>the
>>>>>>> Plextor the "allows CD text" box is not checked, and it won't allow
>>>me
>>>>>to
>>>>>>> check it. I noticed that (after doing some google searching) that
>when
>>>>>I
>>>>>>> try to rip a commercial CD that has CD text (checked it with another
>>>computer)
>>>>>>> it won't display the text. Has anyone here had this experience with
>>>Plextors
>>>>>>> or have any knowledge about this in general? Does it have anything
>to
>>>>>do
>>>>>>> with CDDB?
>>>>>>> Thanks
>>>>>>> Rod
>>>>>>
>>>>>>--
>>>>>>Chris Ludwig
>>>>>>
>>>>>>ADK Pro Audio
>>>>>>(859) 635-5762
>>>>>>www.adkproaudio.com
>>>>>>chrisl@adkproaudio.com
|
|
|
|
Goto Forum:
Current Time: Mon Nov 18 08:23:26 PST 2024
Total time taken to generate the page: 0.01836 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
