The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Help- Can't open PARIS after replacing an EDS with EMU 0404 card
Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67343] Tue, 25 April 2006 09:11 Go to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
So I go to open PARIS and get an error occured while reading
default project.A new empty project will be created.There are not
enough free resources.Then I get an unhandled exception error and
have to restart the comp.

I'm getting this after taking out an EDS card and putting an EMU
0404 card in its spot.

Heres what I've got in the comp:

PCI 1 UAD-1 IRQ 18
PCI 2 EMU 0404 IRQ 21
PCI 3 EDS IRQ 22
PCI 4 EDS IRQ 16
PCI 5 EDS IRQ 18

Those IRQ assignments were working with the EDS in place where
the EMU is now.Any ideas?SHould I move the EMU card?

Should I finally hook up the Magma 13 slot I've been lazy with
and not hooked up.

Thamks peeps,
Pete
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67346 is a reply to message #67343] Tue, 25 April 2006 10:26 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_0022_01C6686B.DE06BA10
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Pete,
I was never successful having the UAD sharing with an EDS card.
Maybe that's it? I did allow Paris to boot up though. Did you
remove the extra Scherzo driver for the removed EDS? =20

The Magma will open up your IRQ options with a little trial and error.
Tom
"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message =
news:444e4a2b$1@linux...

So I go to open PARIS and get an error occured while reading
default project.A new empty project will be created.There are not
enough free resources.Then I get an unhandled exception error and
have to restart the comp.

I'm getting this after taking out an EDS card and putting an EMU
0404 card in its spot.

Heres what I've got in the comp:

PCI 1 UAD-1 IRQ 18
PCI 2 EMU 0404 IRQ 21
PCI 3 EDS IRQ 22
PCI 4 EDS IRQ 16
PCI 5 EDS IRQ 18

Those IRQ assignments were working with the EDS in place where
the EMU is now.Any ideas?SHould I move the EMU card?

Should I finally hook up the Magma 13 slot I've been lazy with
and not hooked up.

Thamks peeps,
Pete
------=_NextPart_000_0022_01C6686B.DE06BA10
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I was never successful having the UAD =
sharing with=20
an EDS card.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Maybe that's it?&nbsp; I did allow =
Paris to boot up=20
though.&nbsp; Did you</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>remove the extra Scherzo driver for the =
removed=20
EDS?&nbsp; </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>The Magma </FONT><FONT face=3DArial =
size=3D2>will open=20
up your IRQ options </FONT><FONT face=3DArial size=3D2>with a little =
trial and=20
error.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Pete Ruthenburg" &lt;<A=20
=
href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>&gt;=
wrote=20
in message <A=20
=
href=3D"news:444e4a2b$1@linux">news:444e4a2b$1@linux</A>...</DIV><BR>So =
I go to=20
open PARIS and get an error occured while reading<BR>default project.A =
new=20
empty project will be created.There are not<BR>enough free =
resources.Then I=20
get an unhandled exception error and<BR>have to restart the =
comp.<BR><BR>I'm=20
getting this after taking out an EDS card and putting an EMU<BR>0404 =
card in=20
its spot.<BR><BR>Heres what I've got in the comp:<BR><BR>PCI 1&nbsp;=20
UAD-1&nbsp;&nbsp;&nbsp; IRQ 18<BR>PCI 2&nbsp; EMU 0404 IRQ 21<BR>PCI =
3&nbsp;=20
EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ 22<BR>PCI 4&nbsp;=20
EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ 16<BR>PCI 5&nbsp;=20
EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ 18<BR><BR>Those IRQ assignments =
were=20
working with the EDS in place where<BR>the EMU is now.Any ideas?SHould =
I move=20
the EMU card?<BR><BR>Should I finally hook up the Magma 13 slot I've =
been lazy=20
with<BR>and not hooked up.<BR><BR>Thamks=20
peeps,<BR>Pete</BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_0022_01C6686B.DE06BA10--
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67351 is a reply to message #67346] Tue, 25 April 2006 13:49 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
Broke it down to a 2 EDS system with no cards in PCI slot 5.

So no IRQ sharing with EDS cards at all and I still get the same
thing.I wondered when I threw in the EMU card if PARIS would go
funky on me;now I've got my answer.Damn!

Pete

"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Pete,
>I was never successful having the UAD sharing with an EDS card.
>Maybe that's it? I did allow Paris to boot up though. Did you
>remove the extra Scherzo driver for the removed EDS? =20
>
>The Magma will open up your IRQ options with a little trial and error.
>Tom
> "Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote in message =
>news:444e4a2b$1@linux...
>
> So I go to open PARIS and get an error occured while reading
> default project.A new empty project will be created.There are not
> enough free resources.Then I get an unhandled exception error and
> have to restart the comp.
>
> I'm getting this after taking out an EDS card and putting an EMU
> 0404 card in its spot.
>
> Heres what I've got in the comp:
>
> PCI 1 UAD-1 IRQ 18
> PCI 2 EMU 0404 IRQ 21
> PCI 3 EDS IRQ 22
> PCI 4 EDS IRQ 16
> PCI 5 EDS IRQ 18
>
> Those IRQ assignments were working with the EDS in place where
> the EMU is now.Any ideas?SHould I move the EMU card?
>
> Should I finally hook up the Magma 13 slot I've been lazy with
> and not hooked up.
>
> Thamks peeps,
> Pete
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>I was never successful having the UAD =
>sharing with=20
>an EDS card.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Maybe that's it?  I did allow =
>Paris to boot up=20
>though.  Did you</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>remove the extra Scherzo driver for the
=
>removed=20
>EDS?  </FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>The Magma </FONT><FONT face=3DArial =
>size=3D2>will open=20
>up your IRQ options </FONT><FONT face=3DArial size=3D2>with a little =
>trial and=20
>error.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Pete Ruthenburg" <<A=20
> =
>href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
> wrote=20
> in message <A=20
> =
>href=3D"news:444e4a2b$1@linux">news:444e4a2b$1@linux</A>...</DIV><BR>So
=
>I go to=20
> open PARIS and get an error occured while reading<BR>default project.A
=
>new=20
> empty project will be created.There are not<BR>enough free =
>resources.Then I=20
> get an unhandled exception error and<BR>have to restart the =
>comp.<BR><BR>I'm=20
> getting this after taking out an EDS card and putting an EMU<BR>0404 =
>card in=20
> its spot.<BR><BR>Heres what I've got in the comp:<BR><BR>PCI 1 =20
> UAD-1    IRQ 18<BR>PCI 2  EMU 0404 IRQ 21<BR>PCI =
>3 =20
> EDS      IRQ 22<BR>PCI 4 =20
> EDS      IRQ 16<BR>PCI 5 =20
> EDS      IRQ 18<BR><BR>Those IRQ assignments =
>were=20
> working with the EDS in place where<BR>the EMU is now.Any ideas?SHould
=
>I move=20
> the EMU card?<BR><BR>Should I finally hook up the Magma 13 slot I've =
>been lazy=20
> with<BR>and not hooked up.<BR><BR>Thamks=20
>peeps,<BR>Pete</BLOCKQUOTE></BODY></HTML>
>
>
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67352 is a reply to message #67343] Tue, 25 April 2006 14:02 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
So I took out my UAD and EMU card and 1 EDS;still getting the
same message.

So all I have in the comp are 2 EDS cards and I'm getting the
same thing.

Pretty frustrating since I had 4 EDS and 1 UAD working before I
installed the EMU 0404.

IDEAS?

Pete

"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>
>So I go to open PARIS and get an error occured while reading
>default project.A new empty project will be created.There are not
>enough free resources.Then I get an unhandled exception error and
>have to restart the comp.
>
>I'm getting this after taking out an EDS card and putting an EMU
>0404 card in its spot.
>
>Heres what I've got in the comp:
>
>PCI 1 UAD-1 IRQ 18
>PCI 2 EMU 0404 IRQ 21
>PCI 3 EDS IRQ 22
>PCI 4 EDS IRQ 16
>PCI 5 EDS IRQ 18
>
>Those IRQ assignments were working with the EDS in place where
>the EMU is now.Any ideas?SHould I move the EMU card?
>
>Should I finally hook up the Magma 13 slot I've been lazy with
>and not hooked up.
>
>Thamks peeps,
>Pete
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67353 is a reply to message #67352] Tue, 25 April 2006 15:43 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_0011_01C66898.1BD5C530
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Pete,
Can you go to the most recent restore point in your computer
before this debacle? That would probably work the bugs out=20
without the new EMU card installed.
Tom
"Pete" <ruthenburg@sbcglobal.net> wrote in message =
news:444e8e5e$1@linux...

So I took out my UAD and EMU card and 1 EDS;still getting the
same message.

So all I have in the comp are 2 EDS cards and I'm getting the
same thing.

Pretty frustrating since I had 4 EDS and 1 UAD working before I
installed the EMU 0404.

IDEAS?

Pete

"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>
>So I go to open PARIS and get an error occured while reading
>default project.A new empty project will be created.There are not
>enough free resources.Then I get an unhandled exception error and
>have to restart the comp.
>
>I'm getting this after taking out an EDS card and putting an EMU
>0404 card in its spot.
>
>Heres what I've got in the comp:
>
>PCI 1 UAD-1 IRQ 18
>PCI 2 EMU 0404 IRQ 21
>PCI 3 EDS IRQ 22
>PCI 4 EDS IRQ 16
>PCI 5 EDS IRQ 18
>
>Those IRQ assignments were working with the EDS in place where
>the EMU is now.Any ideas?SHould I move the EMU card?
>
>Should I finally hook up the Magma 13 slot I've been lazy with
>and not hooked up.
>
>Thamks peeps,
>Pete

------=_NextPart_000_0011_01C66898.1BD5C530
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Can you go to the most recent restore =
point in your=20
computer</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>before this debacle?&nbsp; </FONT><FONT =
face=3DArial=20
size=3D2>That would probably work the bugs out </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>without the new EMU </FONT><FONT =
face=3DArial=20
size=3D2>card installed.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Pete" &lt;<A=20
=
href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>&gt;=
wrote=20
in message <A=20
=
href=3D"news:444e8e5e$1@linux">news:444e8e5e$1@linux</A>...</DIV><BR>So =
I took=20
out my UAD and EMU card and 1 EDS;still getting the<BR>same =
message.<BR><BR>So=20
all I have in the comp are 2 EDS cards and I'm getting the<BR>same=20
thing.<BR><BR>Pretty frustrating since I had 4 EDS and 1 UAD working =
before=20
I<BR>installed the EMU 0404.<BR><BR>IDEAS?<BR><BR>Pete<BR><BR>"Pete=20
Ruthenburg" &lt;<A=20
=
href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>&gt;=
=20
wrote:<BR>&gt;<BR>&gt;So I go to open PARIS and get an error occured =
while=20
reading<BR>&gt;default project.A new empty project will be =
created.There are=20
not<BR>&gt;enough free resources.Then I get an unhandled exception =
error=20
and<BR>&gt;have to restart the comp.<BR>&gt;<BR>&gt;I'm getting this =
after=20
taking out an EDS card and putting an EMU<BR>&gt;0404 card in its=20
spot.<BR>&gt;<BR>&gt;Heres what I've got in the =
comp:<BR>&gt;<BR>&gt;PCI=20
1&nbsp; UAD-1&nbsp;&nbsp;&nbsp; IRQ 18<BR>&gt;PCI 2&nbsp; EMU 0404 IRQ =

21<BR>&gt;PCI 3&nbsp; EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ =
22<BR>&gt;PCI=20
4&nbsp; EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ 16<BR>&gt;PCI 5&nbsp;=20
EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ 18<BR>&gt;<BR>&gt;Those IRQ =
assignments=20
were working with the EDS in place where<BR>&gt;the EMU is now.Any=20
ideas?SHould I move the EMU card?<BR>&gt;<BR>&gt;Should I finally hook =
up the=20
Magma 13 slot I've been lazy with<BR>&gt;and not hooked=20
up.<BR>&gt;<BR>&gt;Thamks =
peeps,<BR>&gt;Pete<BR></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_0011_01C66898.1BD5C530--
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67358 is a reply to message #67353] Tue, 25 April 2006 18:32 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
Tom,
Can you believe I wasn't hip to the whole restore thing!Looks
pretty useful;of course my system restore was turned off so there
were no restore points to go back to.I turned it on,but thats
not much help with my current problem.

Thanks much though;you probably helped with all the future
problems I get into.

Pete

"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Pete,
>Can you go to the most recent restore point in your computer
>before this debacle? That would probably work the bugs out=20
>without the new EMU card installed.
>Tom
> "Pete" <ruthenburg@sbcglobal.net> wrote in message =
>news:444e8e5e$1@linux...
>
> So I took out my UAD and EMU card and 1 EDS;still getting the
> same message.
>
> So all I have in the comp are 2 EDS cards and I'm getting the
> same thing.
>
> Pretty frustrating since I had 4 EDS and 1 UAD working before I
> installed the EMU 0404.
>
> IDEAS?
>
> Pete
>
> "Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
> >
> >So I go to open PARIS and get an error occured while reading
> >default project.A new empty project will be created.There are not
> >enough free resources.Then I get an unhandled exception error and
> >have to restart the comp.
> >
> >I'm getting this after taking out an EDS card and putting an EMU
> >0404 card in its spot.
> >
> >Heres what I've got in the comp:
> >
> >PCI 1 UAD-1 IRQ 18
> >PCI 2 EMU 0404 IRQ 21
> >PCI 3 EDS IRQ 22
> >PCI 4 EDS IRQ 16
> >PCI 5 EDS IRQ 18
> >
> >Those IRQ assignments were working with the EDS in place where
> >the EMU is now.Any ideas?SHould I move the EMU card?
> >
> >Should I finally hook up the Magma 13 slot I've been lazy with
> >and not hooked up.
> >
> >Thamks peeps,
> >Pete
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Can you go to the most recent restore =
>point in your=20
>computer</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>before this debacle?  </FONT><FONT =
>face=3DArial=20
>size=3D2>That would probably work the bugs out </FONT></DIV>
><DIV><FONT face=3DArial size=3D2>without the new EMU </FONT><FONT =
>face=3DArial=20
>size=3D2>card installed.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Pete" <<A=20
> =
>href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
> wrote=20
> in message <A=20
> =
>href=3D"news:444e8e5e$1@linux">news:444e8e5e$1@linux</A>...</DIV><BR>So
=
>I took=20
> out my UAD and EMU card and 1 EDS;still getting the<BR>same =
>message.<BR><BR>So=20
> all I have in the comp are 2 EDS cards and I'm getting the<BR>same=20
> thing.<BR><BR>Pretty frustrating since I had 4 EDS and 1 UAD working =
>before=20
> I<BR>installed the EMU 0404.<BR><BR>IDEAS?<BR><BR>Pete<BR><BR>"Pete=20
> Ruthenburg" <<A=20
> =
>href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
>=20
> wrote:<BR>><BR>>So I go to open PARIS and get an error occured =
>while=20
> reading<BR>>default project.A new empty project will be =
>created.There are=20
> not<BR>>enough free resources.Then I get an unhandled exception =
>error=20
> and<BR>>have to restart the comp.<BR>><BR>>I'm getting this =
>after=20
> taking out an EDS card and putting an EMU<BR>>0404 card in its=20
> spot.<BR>><BR>>Heres what I've got in the =
>comp:<BR>><BR>>PCI=20
> 1  UAD-1    IRQ 18<BR>>PCI 2  EMU 0404 IRQ =
>
> 21<BR>>PCI 3  EDS      IRQ =
>22<BR>>PCI=20
> 4  EDS      IRQ 16<BR>>PCI 5 =20
> EDS      IRQ 18<BR>><BR>>Those IRQ =
>assignments=20
> were working with the EDS in place where<BR>>the EMU is now.Any=20
> ideas?SHould I move the EMU card?<BR>><BR>>Should I finally hook =
>up the=20
> Magma 13 slot I've been lazy with<BR>>and not hooked=20
> up.<BR>><BR>>Thamks =
>peeps,<BR>>Pete<BR></BLOCKQUOTE></BODY></HTML>
>
>
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67360 is a reply to message #67358] Tue, 25 April 2006 20:42 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_003F_01C668C1.F1215C30
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Pete,
Well I wouldn't want to use today's config for
a restore point that's for sure. There wasn't one
way way back? Months ago before you turned Restore off?
You know you can turn back the pages on that calendar right?
Go back another month or two. Mine saves the last day of every month.
I guess you don't have a cloned C drive either huh?

I'd go back to undoing everything you remember doing to
add that EMU card. Uninstall EMU's drivers, remove all
scherzo drivers that aren't being used. Maybe even uninstall
all the Scherzos and add one card at a time fresh. Let Windows
look for drivers.

I'm not much of a tech. I'm sure Aaron, David or DJ could fix this
for you more quickly.

Good luck,
Tom

"Pete" <ruthenburg@sbcglobal.net> wrote in message =
news:444ecdc7$1@linux...

Tom,
Can you believe I wasn't hip to the whole restore thing!Looks
pretty useful;of course my system restore was turned off so there
were no restore points to go back to.I turned it on,but thats
not much help with my current problem.

Thanks much though;you probably helped with all the future=20
problems I get into.

Pete

"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Pete,
>Can you go to the most recent restore point in your computer
>before this debacle? That would probably work the bugs out=3D20
>without the new EMU card installed.
>Tom
> "Pete" <ruthenburg@sbcglobal.net> wrote in message =3D
>news:444e8e5e$1@linux...
>
> So I took out my UAD and EMU card and 1 EDS;still getting the
> same message.
>
> So all I have in the comp are 2 EDS cards and I'm getting the
> same thing.
>
> Pretty frustrating since I had 4 EDS and 1 UAD working before I
> installed the EMU 0404.
>
> IDEAS?
>
> Pete
>
> "Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
> >
> >So I go to open PARIS and get an error occured while reading
> >default project.A new empty project will be created.There are not
> >enough free resources.Then I get an unhandled exception error and
> >have to restart the comp.
> >
> >I'm getting this after taking out an EDS card and putting an EMU
> >0404 card in its spot.
> >
> >Heres what I've got in the comp:
> >
> >PCI 1 UAD-1 IRQ 18
> >PCI 2 EMU 0404 IRQ 21
> >PCI 3 EDS IRQ 22
> >PCI 4 EDS IRQ 16
> >PCI 5 EDS IRQ 18
> >
> >Those IRQ assignments were working with the EDS in place where
> >the EMU is now.Any ideas?SHould I move the EMU card?
> >
> >Should I finally hook up the Magma 13 slot I've been lazy with
> >and not hooked up.
> >
> >Thamks peeps,
> >Pete
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3D3DContent-Type content=3D3D"text/html; =3D
>charset=3D3Diso-8859-1">
><META content=3D3D"MSHTML 6.00.2800.1400" name=3D3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D3D#ffffff>
><DIV><FONT face=3D3DArial size=3D3D2>Pete,</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Can you go to the most recent =
restore =3D
>point in your=3D20
>computer</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>before this debacle? =
</FONT><FONT =3D
>face=3D3DArial=3D20
>size=3D3D2>That would probably work the bugs out </FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>without the new EMU </FONT><FONT =
=3D
>face=3D3DArial=3D20
>size=3D3D2>card installed.</FONT></DIV>
><DIV><FONT face=3D3DArial size=3D3D2>Tom</FONT></DIV>
><BLOCKQUOTE=3D20
>style=3D3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
=3D
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Pete" <<A=3D20
> =3D
=
>href=3D3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
=3D
> wrote=3D20
> in message <A=3D20
> =3D
=
>href=3D3D"news:444e8e5e$1@linux">news:444e8e5e$1@linux</A>...</DIV><BR>S=
o
=3D
>I took=3D20
> out my UAD and EMU card and 1 EDS;still getting the<BR>same =3D
>message.<BR><BR>So=3D20
> all I have in the comp are 2 EDS cards and I'm getting =
the<BR>same=3D20
> thing.<BR><BR>Pretty frustrating since I had 4 EDS and 1 UAD =
working =3D
>before=3D20
> I<BR>installed the EMU =
0404.<BR><BR>IDEAS?<BR><BR>Pete<BR><BR>"Pete=3D20
> Ruthenburg" <<A=3D20
> =3D
=
>href=3D3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
=3D
>=3D20
> wrote:<BR>><BR>>So I go to open PARIS and get an error occured =3D
>while=3D20
> reading<BR>>default project.A new empty project will be =3D
>created.There are=3D20
> not<BR>>enough free resources.Then I get an unhandled exception =3D
>error=3D20
> and<BR>>have to restart the comp.<BR>><BR>>I'm getting this =3D
>after=3D20
> taking out an EDS card and putting an EMU<BR>>0404 card in its=3D20
> spot.<BR>><BR>>Heres what I've got in the =3D
>comp:<BR>><BR>>PCI=3D20
> 1 UAD-1 IRQ 18<BR>>PCI 2 EMU 0404 IRQ =3D
>
> 21<BR>>PCI 3 EDS IRQ =3D
>22<BR>>PCI=3D20
> 4 EDS IRQ 16<BR>>PCI 5 =3D20
> EDS IRQ 18<BR>><BR>>Those IRQ =3D
>assignments=3D20
> were working with the EDS in place where<BR>>the EMU is =
now.Any=3D20
> ideas?SHould I move the EMU card?<BR>><BR>>Should I finally hook =
=3D
>up the=3D20
> Magma 13 slot I've been lazy with<BR>>and not hooked=3D20
> up.<BR>><BR>>Thamks =3D
>peeps,<BR>>Pete<BR></BLOCKQUOTE></BODY></HTML>
>
>

------=_NextPart_000_003F_01C668C1.F1215C30
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Well I wouldn't want to use today's =
config=20
for</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>a restore point that's for sure.&nbsp; =
There wasn't=20
one</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>way way back?&nbsp; Months ago before =
you=20
turned&nbsp;Restore&nbsp;off?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>You know you can turn back the pages on =
that=20
calendar right?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Go back another month or two.&nbsp; =
Mine saves the=20
last day of every month.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I guess you don't have a cloned C drive =
either=20
huh?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I'd go back to undoing everything you =
remember=20
doing to</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>add that EMU card.&nbsp; Uninstall =
EMU's drivers,=20
remove all</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>scherzo drivers that aren't being =
used.&nbsp; Maybe=20
even uninstall</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>all the Scherzos and add one card at a =
time=20
fresh.&nbsp; Let Windows</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>look for drivers.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I'm not much of a tech.&nbsp; I'm sure =
Aaron, David=20
or DJ could fix this</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>for you more quickly.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Good luck,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Pete" &lt;<A=20
=
href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>&gt;=
wrote=20
in message <A=20
=
href=3D"news:444ecdc7$1@linux">news:444ecdc7$1@linux</A>...</DIV><BR>Tom,=
<BR>&nbsp;=20
Can you believe I wasn't hip to the whole restore =
thing!Looks<BR>pretty=20
useful;of course my system restore was turned off so there<BR>were no =
restore=20
points to go back to.I turned it on,but thats<BR>not much help with my =
current=20
problem.<BR><BR>&nbsp;Thanks much though;you probably helped with all =
the=20
future <BR>problems I get into.<BR><BR>Pete<BR><BR>"Tom Bruhl" &lt;<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>&gt;=20
wrote:<BR>&gt;<BR>&gt;<BR>&gt;Pete,<BR>&gt;Can you go to the most =
recent=20
restore point in your computer<BR>&gt;before this debacle?&nbsp; That =
would=20
probably work the bugs out=3D20<BR>&gt;without the new EMU card=20
installed.<BR>&gt;Tom<BR>&gt;&nbsp; "Pete" &lt;<A=20
=
href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>&gt;=
wrote=20
in message =3D<BR>&gt;news:444e8e5e$1@linux...<BR>&gt;<BR>&gt;&nbsp; =
So I took=20
out my UAD and EMU card and 1 EDS;still getting the<BR>&gt;&nbsp; same =

message.<BR>&gt;<BR>&gt;&nbsp; So all I have in the comp are 2 EDS =
cards and=20
I'm getting the<BR>&gt;&nbsp; same thing.<BR>&gt;<BR>&gt;&nbsp; Pretty =

frustrating since I had 4 EDS and 1 UAD working before I<BR>&gt;&nbsp; =

installed the EMU 0404.<BR>&gt;<BR>&gt;&nbsp; =
IDEAS?<BR>&gt;<BR>&gt;&nbsp;=20
Pete<BR>&gt;<BR>&gt;&nbsp; "Pete Ruthenburg" &lt;<A=20
=
href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>&gt;=
=20
wrote:<BR>&gt;&nbsp; &gt;<BR>&gt;&nbsp; &gt;So I go to open PARIS and =
get an=20
error occured while reading<BR>&gt;&nbsp; &gt;default project.A new =
empty=20
project will be created.There are not<BR>&gt;&nbsp; &gt;enough free=20
resources.Then I get an unhandled exception error and<BR>&gt;&nbsp; =
&gt;have=20
to restart the comp.<BR>&gt;&nbsp; &gt;<BR>&gt;&nbsp; &gt;I'm getting =
this=20
after taking out an EDS card and putting an EMU<BR>&gt;&nbsp; &gt;0404 =
card in=20
its spot.<BR>&gt;&nbsp; &gt;<BR>&gt;&nbsp; &gt;Heres what I've got in =
the=20
comp:<BR>&gt;&nbsp; &gt;<BR>&gt;&nbsp; &gt;PCI 1&nbsp; =
UAD-1&nbsp;&nbsp;&nbsp;=20
IRQ 18<BR>&gt;&nbsp; &gt;PCI 2&nbsp; EMU 0404 IRQ 21<BR>&gt;&nbsp; =
&gt;PCI=20
3&nbsp; EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ 22<BR>&gt;&nbsp; &gt;PCI =
4&nbsp;=20
EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ 16<BR>&gt;&nbsp; &gt;PCI 5&nbsp; =

EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ 18<BR>&gt;&nbsp; =
&gt;<BR>&gt;&nbsp;=20
&gt;Those IRQ assignments were working with the EDS in place=20
where<BR>&gt;&nbsp; &gt;the EMU is now.Any ideas?SHould I move the EMU =

card?<BR>&gt;&nbsp; &gt;<BR>&gt;&nbsp; &gt;Should I finally hook up =
the Magma=20
13 slot I've been lazy with<BR>&gt;&nbsp; &gt;and not hooked =
up.<BR>&gt;&nbsp;=20
&gt;<BR>&gt;&nbsp; &gt;Thamks peeps,<BR>&gt;&nbsp;=20
&gt;Pete<BR>&gt;<BR>&gt;<BR>&gt;&lt;!DOCTYPE HTML PUBLIC "-//W3C//DTD =
HTML 4.0=20
Transitional//EN"&gt;<BR>&gt;&lt;HTML&gt;&lt;HEAD&gt; <BR>&gt;&lt;META=20
http-equiv=3D3DContent-Type content=3D3D"text/html;=20
=3D<BR>&gt;charset=3D3Diso-8859-1"&gt;<BR>&gt;&lt;META =
content=3D3D"MSHTML=20
6.00.2800.1400"=20
=
name=3D3DGENERATOR&gt;<BR>&gt;&lt;STYLE&gt;&lt;/STYLE&gt; <BR>&gt;&lt;/HEA=
D&gt;<BR>&gt;&lt;BODY=20
bgColor=3D3D#ffffff&gt;<BR>&gt;&lt;DIV&gt;&lt;FONT face=3D3DArial=20
=
size=3D3D2&gt;Pete,&lt;/FONT&gt;&lt;/DIV& ;gt; <BR>&gt;&lt;DIV&gt;&lt;FONT=20
face=3D3DArial size=3D3D2&gt;Can you go to the most recent restore =
=3D<BR>&gt;point=20
in =
your=3D20<BR>&gt;computer&lt;/FONT&gt;&lt;/DIV&gt; <BR>&gt;&lt;DIV&gt;&lt;=
FONT=20
face=3D3DArial size=3D3D2&gt;before this debacle? =
&lt;/FONT&gt;&lt;FONT=20
=3D<BR>&gt;face=3D3DArial=3D20<BR>&gt;size=3D3D2&gt;That would =
probably work the bugs=20
out &lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
size=3D3D2&gt;without the new EMU &lt;/FONT&gt;&lt;FONT=20
=3D<BR>&gt;face=3D3DArial=3D20<BR>&gt;size=3D3D2&gt;card=20
installed.&lt;/FONT&gt;&lt;/DIV&gt;<BR>&gt;&lt;DIV&gt;&lt;FONT =
face=3D3DArial=20
=
size=3D3D2&gt;Tom&lt;/FONT&gt;&lt;/DIV&g t; <BR>&gt;&lt;BLOCKQUOTE=3D20<BR>=
&gt;style=3D3D"PADDING-RIGHT:=20
0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =3D<BR>&gt;BORDER-LEFT: =
#000000 2px=20
solid; MARGIN-RIGHT: 0px"&gt;<BR>&gt;&nbsp; &lt;DIV&gt;"Pete"=20
&lt;&lt;A=3D20<BR>&gt;&nbsp; =3D<BR>&gt;href=3D3D"<A=20
=
href=3D'mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A'>mai=
lto:ruthenburg@sbcglobal.net"&gt;ruthenburg@sbcglobal.net&lt;/A</A>&gt;&g=
t;=3D<BR>&gt;=20
wrote=3D20<BR>&gt;&nbsp; in message &lt;A=3D20<BR>&gt;&nbsp; =
=3D<BR>&gt;href=3D3D"<A=20
=
href=3D'news:444e8e5e$1@linux">news:444e8e5e$1@linux</A>...</DIV><BR>So'>=
news:444e8e5e$1@linux"&gt;news:444e8e5e$1@linux&lt;/A&gt;...&lt;/DIV&gt;&=
lt;BR&gt;So</A><BR>=3D<BR>&gt;I=20
took=3D20<BR>&gt;&nbsp; out my UAD and EMU card and 1 EDS;still =
getting=20
the&lt;BR&gt;same =
=3D<BR>&gt;message.&lt;BR&gt;&lt;BR&gt;So=3D20 <BR>&gt;&nbsp; all=20
I have in the comp are 2 EDS cards and I'm getting=20
the&lt;BR&gt;same=3D20<BR>&gt;&nbsp; thing.&lt;BR&gt;&lt;BR&gt;Pretty=20
frustrating since I had 4 EDS and 1 UAD working=20
=3D<BR>&gt;before=3D20<BR>&gt;&nbsp; I&lt;BR&gt;installed the EMU=20
=
0404.&lt;BR&gt;&lt;BR&gt;IDEAS?&lt;BR&am p;gt;&lt;BR&gt;Pete&lt;BR&gt;&lt;BR& g=
t;"Pete=3D20<BR>&gt;&nbsp;=20
Ruthenburg" &lt;&lt;A=3D20<BR>&gt;&nbsp; =3D<BR>&gt;href=3D3D"<A=20
=
href=3D'mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A'>mai=
lto:ruthenburg@sbcglobal.net"&gt;ruthenburg@sbcglobal.net&lt;/A</A>&gt;&g=
t;=3D<BR>&gt;=3D20<BR>&gt;&nbsp;=20
wrote:&lt;BR&gt;&gt;&lt;BR&gt;&gt;So I go to open PARIS and get an =
error=20
occured =3D<BR>&gt;while=3D20<BR>&gt;&nbsp; =
reading&lt;BR&gt;&gt;default project.A=20
new empty project will be =3D<BR>&gt;created.There =
are=3D20<BR>&gt;&nbsp;=20
not&lt;BR&gt;&gt;enough free resources.Then I get an unhandled =
exception=20
=3D<BR>&gt;error=3D20<BR>&gt;&nbsp; and&lt;BR&gt;&gt;have to restart =
the=20
comp.&lt;BR&gt;&gt;&lt;BR&gt;&gt;I'm getting this=20
=3D<BR>&gt;after=3D20<BR>&gt;&nbsp; taking out an EDS card and putting =
an=20
EMU&lt;BR&gt;&gt;0404 card in its=3D20<BR>&gt;&nbsp;=20
spot.&lt;BR&gt;&gt;&lt;BR&gt;&gt;Her es what I've got in the=20
=3D<BR> &gt;comp:&lt;BR&gt;&gt;&lt;BR&gt;&am p;gt;PCI=3D20 <BR>&gt;&nbsp; 1 =
UAD-1 IRQ=20
18&lt;BR&gt;&gt;PCI 2 EMU 0404 IRQ =3D<BR>&gt;<BR>&gt;&nbsp; =
21&lt;BR&gt;&gt;PCI=20
3 EDS IRQ =3D<BR>&gt;22&lt;BR&gt;&gt;PCI=3D20<BR>&gt;&nbsp; 4 EDS IRQ=20
16&lt;BR&gt;&gt;PCI 5 =3D20<BR>&gt;&nbsp; EDS IRQ=20
18&lt;BR&gt;&gt;&lt;BR&gt;&gt;Those IRQ =
=3D<BR>&gt;assignments=3D20<BR>&gt;&nbsp;=20
were working with the EDS in place where&lt;BR&gt;&gt;the EMU is=20
now.Any=3D20<BR>&gt;&nbsp; ideas?SHould I move the EMU=20
card?&lt;BR&gt;&gt;&lt;BR&gt;&gt;Sho uld I finally hook =3D<BR>&gt;up=20
the=3D20<BR>&gt;&nbsp; Magma 13 slot I've been lazy =
with&lt;BR&gt;&gt;and not=20
hooked=3D20<BR>&gt;&nbsp; up.&lt;BR&gt;&gt;&lt;BR&gt;&gt;Thamk s=20
=
=3D<BR> &gt;peeps,&lt;BR&gt;&gt;Pete&lt;BR&g t;&lt;/BLOCKQUOTE&gt;&lt;/BODY=
&gt;&lt;/HTML&gt;<BR>&gt;<BR>&gt;<BR ></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_003F_01C668C1.F1215C30--
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67361 is a reply to message #67343] Tue, 25 April 2006 21:29 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
So I've uninstalled anything relating to EMU 0404 card and
Wavelab Essentials.Got my UAD and 1 EDS card.

Upon running PARIS now I get the same 2 windows,then a window
saying not enough resources.

Then I get a DEBUG MESSAGE: gcCreateControl: ran out of
controllers. [0/$0]

So I'm getting some new windows now with everthing broken down.
Is it time to do the XP PARIS reinstall dance?!

Just noticed minimum requirements for the 0404 say service pack
2 and I think I've only got SP1.Could that be causing my
problems and where do I get XP SP2?

TIA,
Pete

"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>
>So I go to open PARIS and get an error occured while reading
>default project.A new empty project will be created.There are not
>enough free resources.Then I get an unhandled exception error and
>have to restart the comp.
>
>I'm getting this after taking out an EDS card and putting an EMU
>0404 card in its spot.
>
>Heres what I've got in the comp:
>
>PCI 1 UAD-1 IRQ 18
>PCI 2 EMU 0404 IRQ 21
>PCI 3 EDS IRQ 22
>PCI 4 EDS IRQ 16
>PCI 5 EDS IRQ 18
>
>Those IRQ assignments were working with the EDS in place where
>the EMU is now.Any ideas?SHould I move the EMU card?
>
>Should I finally hook up the Magma 13 slot I've been lazy with
>and not hooked up.
>
>Thamks peeps,
>Pete
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67365 is a reply to message #67361] Wed, 26 April 2006 01:19 Go to previous messageGo to next message
Tom Bruhl is currently offline  Tom Bruhl   UNITED STATES
Messages: 1368
Registered: June 2007
Senior Member
This is a multi-part message in MIME format.

------=_NextPart_000_007A_01C668E8.95974CE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Pete,
You've done the things I would try. If you want to try
Service Pack 2 it is here:
http://support.microsoft.com/kb/322389#E0EC0ACAAA

I'm not sure this will fix anything in Paris. As a matter of
fact I think SP2 is a bad thing unless absolutely necessary.
Paris is not all that happy with it as I have heard.

I don't have enough right answers for you but a fresh install
should certainly make all things better with Paris. I hope.

I wish smarter people would chime in for your sake.
I think Erling has an EMU card. I'm not sure he's using it within
a Paris computer though. You might try him directly.

Maybe start a new thread with something eye catching for the
smarties!
Tom

"Pete" <ruthenburg@sbcglobal.net> wrote in message =
news:444ef72a$1@linux...

So I've uninstalled anything relating to EMU 0404 card and
Wavelab Essentials.Got my UAD and 1 EDS card.

Upon running PARIS now I get the same 2 windows,then a window=20
saying not enough resources.

Then I get a DEBUG MESSAGE: gcCreateControl: ran out of=20
controllers. [0/$0]

So I'm getting some new windows now with everthing broken down.
Is it time to do the XP PARIS reinstall dance?!

Just noticed minimum requirements for the 0404 say service pack
2 and I think I've only got SP1.Could that be causing my=20
problems and where do I get XP SP2?

TIA,
Pete

"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>
>So I go to open PARIS and get an error occured while reading
>default project.A new empty project will be created.There are not
>enough free resources.Then I get an unhandled exception error and
>have to restart the comp.
>
>I'm getting this after taking out an EDS card and putting an EMU
>0404 card in its spot.
>
>Heres what I've got in the comp:
>
>PCI 1 UAD-1 IRQ 18
>PCI 2 EMU 0404 IRQ 21
>PCI 3 EDS IRQ 22
>PCI 4 EDS IRQ 16
>PCI 5 EDS IRQ 18
>
>Those IRQ assignments were working with the EDS in place where
>the EMU is now.Any ideas?SHould I move the EMU card?
>
>Should I finally hook up the Magma 13 slot I've been lazy with
>and not hooked up.
>
>Thamks peeps,
>Pete

------=_NextPart_000_007A_01C668E8.95974CE0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>You've done the things I would =
try.&nbsp; If you=20
want to try</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Service Pack 2 it is here:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2><A=20
href=3D"http://support.microsoft.com/kb/322389#E0EC0ACAAA">http://support=
..microsoft.com/kb/322389#E0EC0ACAAA</A></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I'm not sure this will fix anything in =
Paris.&nbsp;=20
As a matter of</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>fact I think SP2 is a bad thing unless =
absolutely=20
necessary.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Paris is not all that happy with it as =
I have=20
heard.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I don't have enough right answers for =
you but a=20
fresh install</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>should certainly make all things better =
with=20
Paris.&nbsp; I hope.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I&nbsp;wish smarter people would chime =
in for your=20
sake.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I&nbsp;think Erling has an EMU =
card.&nbsp; I'm not=20
sure he's using it within</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>a Paris computer though.&nbsp; You =
might try him=20
directly.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Maybe start a new thread with something =
eye=20
catching for the</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>smarties!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Pete" &lt;<A=20
=
href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>&gt;=
wrote=20
in message <A=20
=
href=3D"news:444ef72a$1@linux">news:444ef72a$1@linux</A>...</DIV><BR>So =
I've=20
uninstalled anything relating to EMU 0404 card and<BR>Wavelab =
Essentials.Got=20
my UAD and 1 EDS card.<BR><BR>Upon running PARIS now I get the same 2=20
windows,then a window <BR>saying not enough resources.<BR><BR>Then I =
get a=20
DEBUG MESSAGE:&nbsp; gcCreateControl: ran out of <BR>controllers.=20
[0/$0]<BR><BR>So I'm getting some new windows now with everthing =
broken=20
down.<BR>Is it time to do the XP PARIS reinstall dance?!<BR><BR>Just =
noticed=20
minimum requirements for the 0404 say service pack<BR>2 and I think =
I've only=20
got SP1.Could that be causing my <BR>problems and where do I get XP=20
SP2?<BR><BR>TIA,<BR>Pete<BR><BR>"Pete Ruthenburg" &lt;<A=20
=
href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>&gt;=
=20
wrote:<BR>&gt;<BR>&gt;So I go to open PARIS and get an error occured =
while=20
reading<BR>&gt;default project.A new empty project will be =
created.There are=20
not<BR>&gt;enough free resources.Then I get an unhandled exception =
error=20
and<BR>&gt;have to restart the comp.<BR>&gt;<BR>&gt;I'm getting this =
after=20
taking out an EDS card and putting an EMU<BR>&gt;0404 card in its=20
spot.<BR>&gt;<BR>&gt;Heres what I've got in the =
comp:<BR>&gt;<BR>&gt;PCI=20
1&nbsp; UAD-1&nbsp;&nbsp;&nbsp; IRQ 18<BR>&gt;PCI 2&nbsp; EMU 0404 IRQ =

21<BR>&gt;PCI 3&nbsp; EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ =
22<BR>&gt;PCI=20
4&nbsp; EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ 16<BR>&gt;PCI 5&nbsp;=20
EDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IRQ 18<BR>&gt;<BR>&gt;Those IRQ =
assignments=20
were working with the EDS in place where<BR>&gt;the EMU is now.Any=20
ideas?SHould I move the EMU card?<BR>&gt;<BR>&gt;Should I finally hook =
up the=20
Magma 13 slot I've been lazy with<BR>&gt;and not hooked=20
up.<BR>&gt;<BR>&gt;Thamks =
peeps,<BR>&gt;Pete<BR></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_007A_01C668E8.95974CE0--
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67366 is a reply to message #67365] Wed, 26 April 2006 01:53 Go to previous messageGo to next message
Kim is currently offline  Kim
Messages: 1246
Registered: October 2005
Senior Member
I can add that Paris seems to be running fine here for me on SP2.

YMMV.

I think the smarties went down the pub. ;o)

Cheers,
Kim.

"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Pete,
>You've done the things I would try. If you want to try
>Service Pack 2 it is here:
>http://support.microsoft.com/kb/322389#E0EC0ACAAA
>
>I'm not sure this will fix anything in Paris. As a matter of
>fact I think SP2 is a bad thing unless absolutely necessary.
>Paris is not all that happy with it as I have heard.
>
>I don't have enough right answers for you but a fresh install
>should certainly make all things better with Paris. I hope.
>
>I wish smarter people would chime in for your sake.
>I think Erling has an EMU card. I'm not sure he's using it within
>a Paris computer though. You might try him directly.
>
>Maybe start a new thread with something eye catching for the
>smarties!
>Tom
>
> "Pete" <ruthenburg@sbcglobal.net> wrote in message =
>news:444ef72a$1@linux...
>
> So I've uninstalled anything relating to EMU 0404 card and
> Wavelab Essentials.Got my UAD and 1 EDS card.
>
> Upon running PARIS now I get the same 2 windows,then a window=20
> saying not enough resources.
>
> Then I get a DEBUG MESSAGE: gcCreateControl: ran out of=20
> controllers. [0/$0]
>
> So I'm getting some new windows now with everthing broken down.
> Is it time to do the XP PARIS reinstall dance?!
>
> Just noticed minimum requirements for the 0404 say service pack
> 2 and I think I've only got SP1.Could that be causing my=20
> problems and where do I get XP SP2?
>
> TIA,
> Pete
>
> "Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
> >
> >So I go to open PARIS and get an error occured while reading
> >default project.A new empty project will be created.There are not
> >enough free resources.Then I get an unhandled exception error and
> >have to restart the comp.
> >
> >I'm getting this after taking out an EDS card and putting an EMU
> >0404 card in its spot.
> >
> >Heres what I've got in the comp:
> >
> >PCI 1 UAD-1 IRQ 18
> >PCI 2 EMU 0404 IRQ 21
> >PCI 3 EDS IRQ 22
> >PCI 4 EDS IRQ 16
> >PCI 5 EDS IRQ 18
> >
> >Those IRQ assignments were working with the EDS in place where
> >the EMU is now.Any ideas?SHould I move the EMU card?
> >
> >Should I finally hook up the Magma 13 slot I've been lazy with
> >and not hooked up.
> >
> >Thamks peeps,
> >Pete
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>You've done the things I would =
>try. If you=20
>want to try</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Service Pack 2 it is here:</FONT></DIV>
><DIV><FONT face=3DArial size=3D2><A=20
>href=3D"http://support.microsoft.com/kb/322389#E0EC0ACAAA">http://support=
>.microsoft.com/kb/322389#E0EC0ACAAA</A></FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>I'm not sure this will fix anything in
=
>Paris. =20
>As a matter of</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>fact I think SP2 is a bad thing unless
=
>absolutely=20
>necessary.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Paris is not all that happy with it as
=
>I have=20
>heard.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>I don't have enough right answers for =
>you but a=20
>fresh install</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>should certainly make all things better
=
>with=20
>Paris. I hope.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>I wish smarter people would chime =
>in for your=20
>sake.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>I think Erling has an EMU =
>card. I'm not=20
>sure he's using it within</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>a Paris computer though. You =
>might try him=20
>directly.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><DIV><FONT face=3DArial size=3D2>Maybe start a new thread with something
=
>eye=20
>catching for the</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>smarties!</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Pete" <<A=20
> =
>href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
> wrote=20
> in message <A=20
> =
>href=3D"news:444ef72a$1@linux">news:444ef72a$1@linux</A>...</DIV><BR>So
=
>I've=20
> uninstalled anything relating to EMU 0404 card and<BR>Wavelab =
>Essentials.Got=20
> my UAD and 1 EDS card.<BR><BR>Upon running PARIS now I get the same 2=20
> windows,then a window <BR>saying not enough resources.<BR><BR>Then I =
>get a=20
> DEBUG MESSAGE: gcCreateControl: ran out of <BR>controllers.=20
> [0/$0]<BR><BR>So I'm getting some new windows now with everthing =
>broken=20
> down.<BR>Is it time to do the XP PARIS reinstall dance?!<BR><BR>Just =
>noticed=20
> minimum requirements for the 0404 say service pack<BR>2 and I think =
>I've only=20
> got SP1.Could that be causing my <BR>problems and where do I get XP=20
> SP2?<BR><BR>TIA,<BR>Pete<BR><BR>"Pete Ruthenburg" <<A=20
> =
>href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
>=20
> wrote:<BR>><BR>>So I go to open PARIS and get an error occured =
>while=20
> reading<BR>>default project.A new empty project will be =
>created.There are=20
> not<BR>>enough free resources.Then I get an unhandled exception =
>error=20
> and<BR>>have to restart the comp.<BR>><BR>>I'm getting this =
>after=20
> taking out an EDS card and putting an EMU<BR>>0404 card in its=20
> spot.<BR>><BR>>Heres what I've got in the =
>comp:<BR>><BR>>PCI=20
> 1 UAD-1 IRQ 18<BR>>PCI 2 EMU 0404 IRQ =
>
> 21<BR>>PCI 3 EDS IRQ =
>22<BR>>PCI=20
> 4 EDS IRQ 16<BR>>PCI 5 =20
> EDS IRQ 18<BR>><BR>>Those IRQ =
>assignments=20
> were working with the EDS in place where<BR>>the EMU is now.Any=20
> ideas?SHould I move the EMU card?<BR>><BR>>Should I finally hook =
>up the=20
> Magma 13 slot I've been lazy with<BR>>and not hooked=20
> up.<BR>><BR>>Thamks =
>peeps,<BR>>Pete<BR></BLOCKQUOTE></BODY></HTML>
>
>
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67367 is a reply to message #67361] Wed, 26 April 2006 05:24 Go to previous messageGo to next message
Rod Lincoln is currently offline  Rod Lincoln
Messages: 883
Registered: September 2005
Senior Member
Pete, put all 4 eds cards and the UAD card back, the way you had it before
trying to install the EMU card. See if that works, I bet it does.
Do you have a default ppj saved? If so, does it have 4 eds submixes in the
template?
If it works when you put all 4 eds cards back. Hide your default ppj, and
make it start with no default. Then start adding things back.
Rod
"Pete" <ruthenburg@sbcglobal.net> wrote:
>
>So I've uninstalled anything relating to EMU 0404 card and
>Wavelab Essentials.Got my UAD and 1 EDS card.
>
>Upon running PARIS now I get the same 2 windows,then a window
>saying not enough resources.
>
>Then I get a DEBUG MESSAGE: gcCreateControl: ran out of
>controllers. [0/$0]
>
>So I'm getting some new windows now with everthing broken down.
>Is it time to do the XP PARIS reinstall dance?!
>
>Just noticed minimum requirements for the 0404 say service pack
>2 and I think I've only got SP1.Could that be causing my
>problems and where do I get XP SP2?
>
>TIA,
>Pete
>
>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>>
>>So I go to open PARIS and get an error occured while reading
>>default project.A new empty project will be created.There are not
>>enough free resources.Then I get an unhandled exception error and
>>have to restart the comp.
>>
>>I'm getting this after taking out an EDS card and putting an EMU
>>0404 card in its spot.
>>
>>Heres what I've got in the comp:
>>
>>PCI 1 UAD-1 IRQ 18
>>PCI 2 EMU 0404 IRQ 21
>>PCI 3 EDS IRQ 22
>>PCI 4 EDS IRQ 16
>>PCI 5 EDS IRQ 18
>>
>>Those IRQ assignments were working with the EDS in place where
>>the EMU is now.Any ideas?SHould I move the EMU card?
>>
>>Should I finally hook up the Magma 13 slot I've been lazy with
>>and not hooked up.
>>
>>Thamks peeps,
>>Pete
>
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67368 is a reply to message #67366] Wed, 26 April 2006 06:43 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
.............are you referring to the smartie dumbass who hosed his mobo over
the weekend trying to update the bios because he was too f***'in lazy to
RTFM on the Matrox P750?

It's been a while since I've used Paris on XP, but right offhand, I'd say
that if the 0404 needs SP2, it needs SP2, and by not having had SP2 loaded
when the drivers were loaded, demons from hell have populated this machine
and an exorcism may be required.

Before performing the exorcism though, I would recreate the *exact*
configuration that worked prior to introducing the *possessed* device and to
double check the number of submixes that pop up in the master mixer window.


"Kim" <hiddensounds@hotmail.com> wrote in message news:444f3512$1@linux...
>
>
> I can add that Paris seems to be running fine here for me on SP2.
>
> YMMV.
>
> I think the smarties went down the pub. ;o)
>
> Cheers,
> Kim.
>
> "Tom Bruhl" <arpegio@comcast.net> wrote:
> >
> >
> >Pete,
> >You've done the things I would try. If you want to try
> >Service Pack 2 it is here:
> >http://support.microsoft.com/kb/322389#E0EC0ACAAA
> >
> >I'm not sure this will fix anything in Paris. As a matter of
> >fact I think SP2 is a bad thing unless absolutely necessary.
> >Paris is not all that happy with it as I have heard.
> >
> >I don't have enough right answers for you but a fresh install
> >should certainly make all things better with Paris. I hope.
> >
> >I wish smarter people would chime in for your sake.
> >I think Erling has an EMU card. I'm not sure he's using it within
> >a Paris computer though. You might try him directly.
> >
> >Maybe start a new thread with something eye catching for the
> >smarties!
> >Tom
> >
> > "Pete" <ruthenburg@sbcglobal.net> wrote in message =
> >news:444ef72a$1@linux...
> >
> > So I've uninstalled anything relating to EMU 0404 card and
> > Wavelab Essentials.Got my UAD and 1 EDS card.
> >
> > Upon running PARIS now I get the same 2 windows,then a window=20
> > saying not enough resources.
> >
> > Then I get a DEBUG MESSAGE: gcCreateControl: ran out of=20
> > controllers. [0/$0]
> >
> > So I'm getting some new windows now with everthing broken down.
> > Is it time to do the XP PARIS reinstall dance?!
> >
> > Just noticed minimum requirements for the 0404 say service pack
> > 2 and I think I've only got SP1.Could that be causing my=20
> > problems and where do I get XP SP2?
> >
> > TIA,
> > Pete
> >
> > "Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
> > >
> > >So I go to open PARIS and get an error occured while reading
> > >default project.A new empty project will be created.There are not
> > >enough free resources.Then I get an unhandled exception error and
> > >have to restart the comp.
> > >
> > >I'm getting this after taking out an EDS card and putting an EMU
> > >0404 card in its spot.
> > >
> > >Heres what I've got in the comp:
> > >
> > >PCI 1 UAD-1 IRQ 18
> > >PCI 2 EMU 0404 IRQ 21
> > >PCI 3 EDS IRQ 22
> > >PCI 4 EDS IRQ 16
> > >PCI 5 EDS IRQ 18
> > >
> > >Those IRQ assignments were working with the EDS in place where
> > >the EMU is now.Any ideas?SHould I move the EMU card?
> > >
> > >Should I finally hook up the Magma 13 slot I've been lazy with
> > >and not hooked up.
> > >
> > >Thamks peeps,
> > >Pete
> >
> >
> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> ><HTML><HEAD>
> ><META http-equiv=3DContent-Type content=3D"text/html; =
> >charset=3Diso-8859-1">
> ><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
> ><STYLE></STYLE>
> ></HEAD>
> ><BODY bgColor=3D#ffffff>
> ><DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>You've done the things I would =
> >try. If you=20
> >want to try</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>Service Pack 2 it is here:</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2><A=20
>
>href=3D"http://support.microsoft.com/kb/322389#E0EC0ACAAA">http://support=
> >.microsoft.com/kb/322389#E0EC0ACAAA</A></FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> ><DIV><FONT face=3DArial size=3D2>I'm not sure this will fix anything in
> =
> >Paris. =20
> >As a matter of</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>fact I think SP2 is a bad thing unless
> =
> >absolutely=20
> >necessary.</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>Paris is not all that happy with it as
> =
> >I have=20
> >heard.</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> ><DIV><FONT face=3DArial size=3D2>I don't have enough right answers for =
> >you but a=20
> >fresh install</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>should certainly make all things better
> =
> >with=20
> >Paris. I hope.</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> ><DIV><FONT face=3DArial size=3D2>I wish smarter people would chime =
> >in for your=20
> >sake.</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>I think Erling has an EMU =
> >card. I'm not=20
> >sure he's using it within</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>a Paris computer though. You =
> >might try him=20
> >directly.</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> ><DIV><FONT face=3DArial size=3D2>Maybe start a new thread with something
> =
> >eye=20
> >catching for the</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>smarties!</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> ><BLOCKQUOTE=20
> >style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> > <DIV>"Pete" <<A=20
> > =
> >href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
> > wrote=20
> > in message <A=20
> > =
> >href=3D"news:444ef72a$1@linux">news:444ef72a$1@linux</A>...</DIV><BR>So
> =
> >I've=20
> > uninstalled anything relating to EMU 0404 card and<BR>Wavelab =
> >Essentials.Got=20
> > my UAD and 1 EDS card.<BR><BR>Upon running PARIS now I get the same
2=20
> > windows,then a window <BR>saying not enough resources.<BR><BR>Then I =
> >get a=20
> > DEBUG MESSAGE: gcCreateControl: ran out of <BR>controllers.=20
> > [0/$0]<BR><BR>So I'm getting some new windows now with everthing =
> >broken=20
> > down.<BR>Is it time to do the XP PARIS reinstall dance?!<BR><BR>Just =
> >noticed=20
> > minimum requirements for the 0404 say service pack<BR>2 and I think =
> >I've only=20
> > got SP1.Could that be causing my <BR>problems and where do I get XP=20
> > SP2?<BR><BR>TIA,<BR>Pete<BR><BR>"Pete Ruthenburg" <<A=20
> > =
> >href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
> >=20
> > wrote:<BR>><BR>>So I go to open PARIS and get an error occured =
> >while=20
> > reading<BR>>default project.A new empty project will be =
> >created.There are=20
> > not<BR>>enough free resources.Then I get an unhandled exception =
> >error=20
> > and<BR>>have to restart the comp.<BR>><BR>>I'm getting this =
> >after=20
> > taking out an EDS card and putting an EMU<BR>>0404 card in its=20
> > spot.<BR>><BR>>Heres what I've got in the =
> >comp:<BR>><BR>>PCI=20
> > 1 UAD-1 IRQ 18<BR>>PCI 2 EMU 0404 IRQ =
> >
> > 21<BR>>PCI 3 EDS IRQ =
> >22<BR>>PCI=20
> > 4 EDS IRQ 16<BR>>PCI 5 =20
> > EDS IRQ 18<BR>><BR>>Those IRQ =
> >assignments=20
> > were working with the EDS in place where<BR>>the EMU is now.Any=20
> > ideas?SHould I move the EMU card?<BR>><BR>>Should I finally hook =
> >up the=20
> > Magma 13 slot I've been lazy with<BR>>and not hooked=20
> > up.<BR>><BR>>Thamks =
> >peeps,<BR>>Pete<BR></BLOCKQUOTE></BODY></HTML>
> >
> >
>
Rod fixxed it! [message #67370 is a reply to message #67367] Wed, 26 April 2006 07:14 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
ROD,YOU THE MAN!Put back all 4 cards and UAD and PARIS started
like normal.

Yes,I have a default I run from with 4 EDS/submixes.

So your saying start PARIS not from the default.Then try putting
in the EMU card?

Thanks a ton.PARIS sure is a finicky beast.

Pete

"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>
>Pete, put all 4 eds cards and the UAD card back, the way you had it before
>trying to install the EMU card. See if that works, I bet it does.
>Do you have a default ppj saved? If so, does it have 4 eds submixes in the
>template?
>If it works when you put all 4 eds cards back. Hide your default ppj, and
>make it start with no default. Then start adding things back.
>Rod
>"Pete" <ruthenburg@sbcglobal.net> wrote:
>>
>>So I've uninstalled anything relating to EMU 0404 card and
>>Wavelab Essentials.Got my UAD and 1 EDS card.
>>
>>Upon running PARIS now I get the same 2 windows,then a window
>>saying not enough resources.
>>
>>Then I get a DEBUG MESSAGE: gcCreateControl: ran out of
>>controllers. [0/$0]
>>
>>So I'm getting some new windows now with everthing broken down.
>>Is it time to do the XP PARIS reinstall dance?!
>>
>>Just noticed minimum requirements for the 0404 say service pack
>>2 and I think I've only got SP1.Could that be causing my
>>problems and where do I get XP SP2?
>>
>>TIA,
>>Pete
>>
>>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>>>
>>>So I go to open PARIS and get an error occured while reading
>>>default project.A new empty project will be created.There are not
>>>enough free resources.Then I get an unhandled exception error and
>>>have to restart the comp.
>>>
>>>I'm getting this after taking out an EDS card and putting an EMU
>>>0404 card in its spot.
>>>
>>>Heres what I've got in the comp:
>>>
>>>PCI 1 UAD-1 IRQ 18
>>>PCI 2 EMU 0404 IRQ 21
>>>PCI 3 EDS IRQ 22
>>>PCI 4 EDS IRQ 16
>>>PCI 5 EDS IRQ 18
>>>
>>>Those IRQ assignments were working with the EDS in place where
>>>the EMU is now.Any ideas?SHould I move the EMU card?
>>>
>>>Should I finally hook up the Magma 13 slot I've been lazy with
>>>and not hooked up.
>>>
>>>Thamks peeps,
>>>Pete
>>
>
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67371 is a reply to message #67368] Wed, 26 April 2006 07:19 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
Thanks Deej.Yep,all is well since I reinstalled all 4 cards and
the UAD.PARIS opens as normal.I do have a 4 EDS/submix default
I run from so this may be my problem(see Rods post below).

I guess if I try the 0404 card again I need to get SP2.

Maybe setting up a default without the 4 cards too.

Thanks,
Pete


"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>............are you referring to the smartie dumbass who hosed his mobo
over
>the weekend trying to update the bios because he was too f***'in lazy to
>RTFM on the Matrox P750?
>
>It's been a while since I've used Paris on XP, but right offhand, I'd say
>that if the 0404 needs SP2, it needs SP2, and by not having had SP2 loaded
>when the drivers were loaded, demons from hell have populated this machine
>and an exorcism may be required.
>
>Before performing the exorcism though, I would recreate the *exact*
>configuration that worked prior to introducing the *possessed* device and
to
>double check the number of submixes that pop up in the master mixer window.
>
>
>"Kim" <hiddensounds@hotmail.com> wrote in message news:444f3512$1@linux...
>>
>>
>> I can add that Paris seems to be running fine here for me on SP2.
>>
>> YMMV.
>>
>> I think the smarties went down the pub. ;o)
>>
>> Cheers,
>> Kim.
>>
>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>> >
>> >
>> >Pete,
>> >You've done the things I would try. If you want to try
>> >Service Pack 2 it is here:
>> >http://support.microsoft.com/kb/322389#E0EC0ACAAA
>> >
>> >I'm not sure this will fix anything in Paris. As a matter of
>> >fact I think SP2 is a bad thing unless absolutely necessary.
>> >Paris is not all that happy with it as I have heard.
>> >
>> >I don't have enough right answers for you but a fresh install
>> >should certainly make all things better with Paris. I hope.
>> >
>> >I wish smarter people would chime in for your sake.
>> >I think Erling has an EMU card. I'm not sure he's using it within
>> >a Paris computer though. You might try him directly.
>> >
>> >Maybe start a new thread with something eye catching for the
>> >smarties!
>> >Tom
>> >
>> > "Pete" <ruthenburg@sbcglobal.net> wrote in message =
>> >news:444ef72a$1@linux...
>> >
>> > So I've uninstalled anything relating to EMU 0404 card and
>> > Wavelab Essentials.Got my UAD and 1 EDS card.
>> >
>> > Upon running PARIS now I get the same 2 windows,then a window=20
>> > saying not enough resources.
>> >
>> > Then I get a DEBUG MESSAGE: gcCreateControl: ran out of=20
>> > controllers. [0/$0]
>> >
>> > So I'm getting some new windows now with everthing broken down.
>> > Is it time to do the XP PARIS reinstall dance?!
>> >
>> > Just noticed minimum requirements for the 0404 say service pack
>> > 2 and I think I've only got SP1.Could that be causing my=20
>> > problems and where do I get XP SP2?
>> >
>> > TIA,
>> > Pete
>> >
>> > "Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>> > >
>> > >So I go to open PARIS and get an error occured while reading
>> > >default project.A new empty project will be created.There are not
>> > >enough free resources.Then I get an unhandled exception error and
>> > >have to restart the comp.
>> > >
>> > >I'm getting this after taking out an EDS card and putting an EMU
>> > >0404 card in its spot.
>> > >
>> > >Heres what I've got in the comp:
>> > >
>> > >PCI 1 UAD-1 IRQ 18
>> > >PCI 2 EMU 0404 IRQ 21
>> > >PCI 3 EDS IRQ 22
>> > >PCI 4 EDS IRQ 16
>> > >PCI 5 EDS IRQ 18
>> > >
>> > >Those IRQ assignments were working with the EDS in place where
>> > >the EMU is now.Any ideas?SHould I move the EMU card?
>> > >
>> > >Should I finally hook up the Magma 13 slot I've been lazy with
>> > >and not hooked up.
>> > >
>> > >Thamks peeps,
>> > >Pete
>> >
>> >
>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>> ><HTML><HEAD>
>> ><META http-equiv=3DContent-Type content=3D"text/html; =
>> >charset=3Diso-8859-1">
>> ><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
>> ><STYLE></STYLE>
>> ></HEAD>
>> ><BODY bgColor=3D#ffffff>
>> ><DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2>You've done the things I would =
>> >try. If you=20
>> >want to try</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2>Service Pack 2 it is here:</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2><A=20
>>
>>href=3D"http://support.microsoft.com/kb/322389#E0EC0ACAAA">http://support=
>> >.microsoft.com/kb/322389#E0EC0ACAAA</A></FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> ><DIV><FONT face=3DArial size=3D2>I'm not sure this will fix anything
in
>> =
>> >Paris. =20
>> >As a matter of</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2>fact I think SP2 is a bad thing unless
>> =
>> >absolutely=20
>> >necessary.</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2>Paris is not all that happy with it
as
>> =
>> >I have=20
>> >heard.</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> ><DIV><FONT face=3DArial size=3D2>I don't have enough right answers for
=
>> >you but a=20
>> >fresh install</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2>should certainly make all things better
>> =
>> >with=20
>> >Paris. I hope.</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> ><DIV><FONT face=3DArial size=3D2>I wish smarter people would chime =
>> >in for your=20
>> >sake.</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2>I think Erling has an EMU =
>> >card. I'm not=20
>> >sure he's using it within</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2>a Paris computer though. You =
>> >might try him=20
>> >directly.</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> ><DIV><FONT face=3DArial size=3D2>Maybe start a new thread with something
>> =
>> >eye=20
>> >catching for the</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2>smarties!</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
>> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> ><BLOCKQUOTE=20
>> >style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>> > <DIV>"Pete" <<A=20
>> > =
>> >href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
>> > wrote=20
>> > in message <A=20
>> > =
>> >href=3D"news:444ef72a$1@linux">news:444ef72a$1@linux</A>...</DIV><BR>So
>> =
>> >I've=20
>> > uninstalled anything relating to EMU 0404 card and<BR>Wavelab =
>> >Essentials.Got=20
>> > my UAD and 1 EDS card.<BR><BR>Upon running PARIS now I get the same
>2=20
>> > windows,then a window <BR>saying not enough resources.<BR><BR>Then
I =
>> >get a=20
>> > DEBUG MESSAGE: gcCreateControl: ran out of <BR>controllers.=20
>> > [0/$0]<BR><BR>So I'm getting some new windows now with everthing =
>> >broken=20
>> > down.<BR>Is it time to do the XP PARIS reinstall dance?!<BR><BR>Just
=
>> >noticed=20
>> > minimum requirements for the 0404 say service pack<BR>2 and I think
=
>> >I've only=20
>> > got SP1.Could that be causing my <BR>problems and where do I get XP=20
>> > SP2?<BR><BR>TIA,<BR>Pete<BR><BR>"Pete Ruthenburg" <<A=20
>> > =
>> >href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
>> >=20
>> > wrote:<BR>><BR>>So I go to open PARIS and get an error occured =
>> >while=20
>> > reading<BR>>default project.A new empty project will be =
>> >created.There are=20
>> > not<BR>>enough free resources.Then I get an unhandled exception =
>> >error=20
>> > and<BR>>have to restart the comp.<BR>><BR>>I'm getting this =
>> >after=20
>> > taking out an EDS card and putting an EMU<BR>>0404 card in its=20
>> > spot.<BR>><BR>>Heres what I've got in the =
>> >comp:<BR>><BR>>PCI=20
>> > 1 UAD-1 IRQ 18<BR>>PCI 2 EMU 0404 IRQ =
>> >
>> > 21<BR>>PCI 3 EDS IRQ =
>> >22<BR>>PCI=20
>> > 4 EDS IRQ 16<BR>>PCI 5 =20
>> > EDS IRQ 18<BR>><BR>>Those IRQ =
>> >assignments=20
>> > were working with the EDS in place where<BR>>the EMU is now.Any=20
>> > ideas?SHould I move the EMU card?<BR>><BR>>Should I finally hook =
>> >up the=20
>> > Magma 13 slot I've been lazy with<BR>>and not hooked=20
>> > up.<BR>><BR>>Thamks =
>> >peeps,<BR>>Pete<BR></BLOCKQUOTE></BODY></HTML>
>> >
>> >
>>
>
>
Re: Help- Can't open PARIS after replacing an EDS with EMU 0404 card [message #67374 is a reply to message #67371] Wed, 26 April 2006 10:54 Go to previous messageGo to next message
Rod Lincoln is currently offline  Rod Lincoln
Messages: 883
Registered: September 2005
Senior Member
Pete, Now that you got that solved. Hide the default ppj in another folder
besides the root EMU folder. This will force Paris to open from an internal
default, not your set up default.
Now remove all but 1 eds and when Paris opens, it will only have 1 eds submix.
Now install the EMU card and see if that works. Then you will know if you
need sp2 or not. If it works, start adding ade cards, 1 at a time, then the
UAD card till everything works. Take it one step at a time, control the variables.
Rod
"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>
>Thanks Deej.Yep,all is well since I reinstalled all 4 cards and
>the UAD.PARIS opens as normal.I do have a 4 EDS/submix default
>I run from so this may be my problem(see Rods post below).
>
>I guess if I try the 0404 card again I need to get SP2.
>
>Maybe setting up a default without the 4 cards too.
>
>Thanks,
>Pete
>
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>>............are you referring to the smartie dumbass who hosed his mobo
>over
>>the weekend trying to update the bios because he was too f***'in lazy to
>>RTFM on the Matrox P750?
>>
>>It's been a while since I've used Paris on XP, but right offhand, I'd say
>>that if the 0404 needs SP2, it needs SP2, and by not having had SP2 loaded
>>when the drivers were loaded, demons from hell have populated this machine
>>and an exorcism may be required.
>>
>>Before performing the exorcism though, I would recreate the *exact*
>>configuration that worked prior to introducing the *possessed* device and
>to
>>double check the number of submixes that pop up in the master mixer window.
>>
>>
>>"Kim" <hiddensounds@hotmail.com> wrote in message news:444f3512$1@linux...
>>>
>>>
>>> I can add that Paris seems to be running fine here for me on SP2.
>>>
>>> YMMV.
>>>
>>> I think the smarties went down the pub. ;o)
>>>
>>> Cheers,
>>> Kim.
>>>
>>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>> >
>>> >
>>> >Pete,
>>> >You've done the things I would try. If you want to try
>>> >Service Pack 2 it is here:
>>> >http://support.microsoft.com/kb/322389#E0EC0ACAAA
>>> >
>>> >I'm not sure this will fix anything in Paris. As a matter of
>>> >fact I think SP2 is a bad thing unless absolutely necessary.
>>> >Paris is not all that happy with it as I have heard.
>>> >
>>> >I don't have enough right answers for you but a fresh install
>>> >should certainly make all things better with Paris. I hope.
>>> >
>>> >I wish smarter people would chime in for your sake.
>>> >I think Erling has an EMU card. I'm not sure he's using it within
>>> >a Paris computer though. You might try him directly.
>>> >
>>> >Maybe start a new thread with something eye catching for the
>>> >smarties!
>>> >Tom
>>> >
>>> > "Pete" <ruthenburg@sbcglobal.net> wrote in message =
>>> >news:444ef72a$1@linux...
>>> >
>>> > So I've uninstalled anything relating to EMU 0404 card and
>>> > Wavelab Essentials.Got my UAD and 1 EDS card.
>>> >
>>> > Upon running PARIS now I get the same 2 windows,then a window=20
>>> > saying not enough resources.
>>> >
>>> > Then I get a DEBUG MESSAGE: gcCreateControl: ran out of=20
>>> > controllers. [0/$0]
>>> >
>>> > So I'm getting some new windows now with everthing broken down.
>>> > Is it time to do the XP PARIS reinstall dance?!
>>> >
>>> > Just noticed minimum requirements for the 0404 say service pack
>>> > 2 and I think I've only got SP1.Could that be causing my=20
>>> > problems and where do I get XP SP2?
>>> >
>>> > TIA,
>>> > Pete
>>> >
>>> > "Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>>> > >
>>> > >So I go to open PARIS and get an error occured while reading
>>> > >default project.A new empty project will be created.There are not
>>> > >enough free resources.Then I get an unhandled exception error and
>>> > >have to restart the comp.
>>> > >
>>> > >I'm getting this after taking out an EDS card and putting an EMU
>>> > >0404 card in its spot.
>>> > >
>>> > >Heres what I've got in the comp:
>>> > >
>>> > >PCI 1 UAD-1 IRQ 18
>>> > >PCI 2 EMU 0404 IRQ 21
>>> > >PCI 3 EDS IRQ 22
>>> > >PCI 4 EDS IRQ 16
>>> > >PCI 5 EDS IRQ 18
>>> > >
>>> > >Those IRQ assignments were working with the EDS in place where
>>> > >the EMU is now.Any ideas?SHould I move the EMU card?
>>> > >
>>> > >Should I finally hook up the Magma 13 slot I've been lazy with
>>> > >and not hooked up.
>>> > >
>>> > >Thamks peeps,
>>> > >Pete
>>> >
>>> >
>>> ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>>> ><HTML><HEAD>
>>> ><META http-equiv=3DContent-Type content=3D"text/html; =
>>> >charset=3Diso-8859-1">
>>> ><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
>>> ><STYLE></STYLE>
>>> ></HEAD>
>>> ><BODY bgColor=3D#ffffff>
>>> ><DIV><FONT face=3DArial size=3D2>Pete,</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2>You've done the things I would =
>>> >try. If you=20
>>> >want to try</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2>Service Pack 2 it is here:</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2><A=20
>>>
>>>href=3D"http://support.microsoft.com/kb/322389#E0EC0ACAAA">http://support=
>>> >.microsoft.com/kb/322389#E0EC0ACAAA</A></FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>> ><DIV><FONT face=3DArial size=3D2>I'm not sure this will fix anything
>in
>>> =
>>> >Paris. =20
>>> >As a matter of</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2>fact I think SP2 is a bad thing unless
>>> =
>>> >absolutely=20
>>> >necessary.</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2>Paris is not all that happy with it
>as
>>> =
>>> >I have=20
>>> >heard.</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>> ><DIV><FONT face=3DArial size=3D2>I don't have enough right answers for
>=
>>> >you but a=20
>>> >fresh install</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2>should certainly make all things better
>>> =
>>> >with=20
>>> >Paris. I hope.</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>> ><DIV><FONT face=3DArial size=3D2>I wish smarter people would chime =
>>> >in for your=20
>>> >sake.</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2>I think Erling has an EMU =
>>> >card. I'm not=20
>>> >sure he's using it within</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2>a Paris computer though. You =
>>> >might try him=20
>>> >directly.</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>> ><DIV><FONT face=3DArial size=3D2>Maybe start a new thread with something
>>> =
>>> >eye=20
>>> >catching for the</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2>smarties!</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
>>> ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>>> ><BLOCKQUOTE=20
>>> >style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>>> >BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>>> > <DIV>"Pete" <<A=20
>>> > =
>>> >href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
>>> > wrote=20
>>> > in message <A=20
>>> > =
>>> >href=3D"news:444ef72a$1@linux">news:444ef72a$1@linux</A>...</DIV><BR>So
>>> =
>>> >I've=20
>>> > uninstalled anything relating to EMU 0404 card and<BR>Wavelab =
>>> >Essentials.Got=20
>>> > my UAD and 1 EDS card.<BR><BR>Upon running PARIS now I get the same
>>2=20
>>> > windows,then a window <BR>saying not enough resources.<BR><BR>Then
>I =
>>> >get a=20
>>> > DEBUG MESSAGE: gcCreateControl: ran out of <BR>controllers.=20
>>> > [0/$0]<BR><BR>So I'm getting some new windows now with everthing =
>>> >broken=20
>>> > down.<BR>Is it time to do the XP PARIS reinstall dance?!<BR><BR>Just
>=
>>> >noticed=20
>>> > minimum requirements for the 0404 say service pack<BR>2 and I think
>=
>>> >I've only=20
>>> > got SP1.Could that be causing my <BR>problems and where do I get XP=20
>>> > SP2?<BR><BR>TIA,<BR>Pete<BR><BR>"Pete Ruthenburg" <<A=20
>>> > =
>>> >href=3D"mailto:ruthenburg@sbcglobal.net">ruthenburg@sbcglobal.net</A>>=
>>> >=20
>>> > wrote:<BR>><BR>>So I go to open PARIS and get an error occured =
>>> >while=20
>>> > reading<BR>>default project.A new empty project will be =
>>> >created.There are=20
>>> > not<BR>>enough free resources.Then I get an unhandled exception =
>>> >error=20
>>> > and<BR>>have to restart the comp.<BR>><BR>>I'm getting this =
>>> >after=20
>>> > taking out an EDS card and putting an EMU<BR>>0404 card in its=20
>>> > spot.<BR>><BR>>Heres what I've got in the =
>>> >comp:<BR>><BR>>PCI=20
>>> > 1 UAD-1 IRQ 18<BR>>PCI 2 EMU 0404 IRQ =
>>> >
>>> > 21<BR>>PCI 3 EDS IRQ =
>>> >22<BR>>PCI=20
>>> > 4 EDS IRQ 16<BR>>PCI 5 =20
>>> > EDS IRQ 18<BR>><BR>>Those IRQ =
>>> >assignments=20
>>> > were working with the EDS in place where<BR>>the EMU is now.Any=20
>>> > ideas?SHould I move the EMU card?<BR>><BR>>Should I finally hook =
>>> >up the=20
>>> > Magma 13 slot I've been lazy with<BR>>and not hooked=20
>>> > up.<BR>><BR>>Thamks =
>>> >peeps,<BR>>Pete<BR></BLOCKQUOTE></BODY></HTML>
>>> >
>>> >
>>>
>>
>>
>
Re: Rod fixxed it! [message #67375 is a reply to message #67370] Wed, 26 April 2006 10:57 Go to previous message
Rod Lincoln is currently offline  Rod Lincoln
Messages: 883
Registered: September 2005
Senior Member
Pete, glad it worked, I posted the answer in the original thread, but basically,
yes.
Rod

"Pete" <ruthenburg@sbcglobal.net> wrote:
>
>ROD,YOU THE MAN!Put back all 4 cards and UAD and PARIS started
>like normal.
>
>Yes,I have a default I run from with 4 EDS/submixes.
>
>So your saying start PARIS not from the default.Then try putting
>in the EMU card?
>
>Thanks a ton.PARIS sure is a finicky beast.
>
>Pete
>
>"Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote:
>>
>>Pete, put all 4 eds cards and the UAD card back, the way you had it before
>>trying to install the EMU card. See if that works, I bet it does.
>>Do you have a default ppj saved? If so, does it have 4 eds submixes in
the
>>template?
>>If it works when you put all 4 eds cards back. Hide your default ppj, and
>>make it start with no default. Then start adding things back.
>>Rod
>>"Pete" <ruthenburg@sbcglobal.net> wrote:
>>>
>>>So I've uninstalled anything relating to EMU 0404 card and
>>>Wavelab Essentials.Got my UAD and 1 EDS card.
>>>
>>>Upon running PARIS now I get the same 2 windows,then a window
>>>saying not enough resources.
>>>
>>>Then I get a DEBUG MESSAGE: gcCreateControl: ran out of
>>>controllers. [0/$0]
>>>
>>>So I'm getting some new windows now with everthing broken down.
>>>Is it time to do the XP PARIS reinstall dance?!
>>>
>>>Just noticed minimum requirements for the 0404 say service pack
>>>2 and I think I've only got SP1.Could that be causing my
>>>problems and where do I get XP SP2?
>>>
>>>TIA,
>>>Pete
>>>
>>>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>>>>
>>>>So I go to open PARIS and get an error occured while reading
>>>>default project.A new empty project will be created.There are not
>>>>enough free resources.Then I get an unhandled exception error and
>>>>have to restart the comp.
>>>>
>>>>I'm getting this after taking out an EDS card and putting an EMU
>>>>0404 card in its spot.
>>>>
>>>>Heres what I've got in the comp:
>>>>
>>>>PCI 1 UAD-1 IRQ 18
>>>>PCI 2 EMU 0404 IRQ 21
>>>>PCI 3 EDS IRQ 22
>>>>PCI 4 EDS IRQ 16
>>>>PCI 5 EDS IRQ 18
>>>>
>>>>Those IRQ assignments were working with the EDS in place where
>>>>the EMU is now.Any ideas?SHould I move the EMU card?
>>>>
>>>>Should I finally hook up the Magma 13 slot I've been lazy with
>>>>and not hooked up.
>>>>
>>>>Thamks peeps,
>>>>Pete
>>>
>>
>
Previous Topic: Barton Athlon XP 3400 CPU
Next Topic: Sony Cinescore
Goto Forum:
  


Current Time: Mon Dec 23 17:47:13 PST 2024

Total time taken to generate the page: 0.04308 seconds