The PARIS Forums


Home » The PARIS Forums » PARIS: Main » For Mike Audet some thoughts that might help !
For Mike Audet some thoughts that might help ! [message #102002] Fri, 09 January 2009 06:23 Go to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Hi Mike !
You are talking for lower latencies in Paris driver...
There is a vst plugin , forget the name right now, that acts as as bus insert
across submixes for vst.
The only way that this would work realtime without chopped audio was if we
put edstransfer 8,8 or even 8,16.
So this edstransfer thing maybe can be fixed by you noting that.
I have read that this edstransfer value make eds cards work harder thus increasing
the temperature and eventually burn out more easily the cards.
Please look at it because this plugin was a godsend for Paris and could help
in putting a vst reverb plugin across all submixes !!
Regards and Happy New Year
Dimitrios
Re: For Mike Audet some thoughts that might help ! [message #102084 is a reply to message #102002] Tue, 13 January 2009 18:06 Go to previous messageGo to next message
Mike Audet is currently offline  Mike Audet
Messages: 294
Registered: December 2008
Senior Member
Hi Dimitrios,

Thanks for this post. Can you remember who said that the transfer settings
could harm the eds cards? From what I gather, the chip that handles DMA
is the same chip that processes audio. It should be able to handle working
full out just the same as the other eds chips can.

I'm very interested in investigating this.

All the best,

Mike

"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi Mike !
>You are talking for lower latencies in Paris driver...
>There is a vst plugin , forget the name right now, that acts as as bus insert
>across submixes for vst.
>The only way that this would work realtime without chopped audio was if
we
>put edstransfer 8,8 or even 8,16.
>So this edstransfer thing maybe can be fixed by you noting that.
>I have read that this edstransfer value make eds cards work harder thus
increasing
>the temperature and eventually burn out more easily the cards.
>Please look at it because this plugin was a godsend for Paris and could
help
>in putting a vst reverb plugin across all submixes !!
>Regards and Happy New Year
>Dimitrios
Re: For Mike Audet some thoughts that might help ! [message #102085 is a reply to message #102084] Tue, 13 January 2009 18:23 Go to previous messageGo to next message
Dimitrios is currently offline  Dimitrios   
Messages: 1056
Registered: August 2005
Senior Member
Hi,
This has been said by ...relli this Paris guy ,don't remember his name.
I have had two eds cards not working at the time I was using the EDS transfer
8,16 option ...
Maybe that was not related or maybe was it ??
There is the open senderella buss vst plugin which works at 0 latency when
you use the edstransfer 8,8 and 8,16.
You can have realtime vst send across submixes and receive on any channel.
So you can mix as many audio tracks and sum them to a specific paris audio
track.
This way you can compress all drumtracks with a vst plugin and even across
submixes.
You can also use a DX reverb ,stereo, and send any Paris audio track from
any submix to this reverb...
I was afraid though with this strange behaviour regarding the cards burn-out
thing.
If you could get this senderella which is free and open source and use it
in conjuction with Paris or even make it better for Paris users that would
be a must try out project !!
Regards,
Dimitrios

"Mike Audet" <mike@...> wrote:
>
>Hi Dimitrios,
>
>Thanks for this post. Can you remember who said that the transfer settings
>could harm the eds cards? From what I gather, the chip that handles DMA
>is the same chip that processes audio. It should be able to handle working
>full out just the same as the other eds chips can.
>
>I'm very interested in investigating this.
>
>All the best,
>
>Mike
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>
>>Hi Mike !
>>You are talking for lower latencies in Paris driver...
>>There is a vst plugin , forget the name right now, that acts as as bus
insert
>>across submixes for vst.
>>The only way that this would work realtime without chopped audio was if
>we
>>put edstransfer 8,8 or even 8,16.
>>So this edstransfer thing maybe can be fixed by you noting that.
>>I have read that this edstransfer value make eds cards work harder thus
>increasing
>>the temperature and eventually burn out more easily the cards.
>>Please look at it because this plugin was a godsend for Paris and could
>help
>>in putting a vst reverb plugin across all submixes !!
>>Regards and Happy New Year
>>Dimitrios
>
Re: For Mike Audet some thoughts that might help ! [message #102091 is a reply to message #102085] Wed, 14 January 2009 04:54 Go to previous messageGo to next message
Mike Audet is currently offline  Mike Audet
Messages: 294
Registered: December 2008
Senior Member
Hi Dimitrios,

I'll check out sendrella to see what I can do with it. Thanks for the lead!

I'm concerned about the two dead cards. I'll email ....rali to see if I
can get any more info.

All the best,

Mike

"Dimitrios" <musurgio@otenet.gr> wrote:
>
>Hi,
>This has been said by ...relli this Paris guy ,don't remember his name.
>I have had two eds cards not working at the time I was using the EDS transfer
>8,16 option ...
>Maybe that was not related or maybe was it ??
>There is the open senderella buss vst plugin which works at 0 latency when
>you use the edstransfer 8,8 and 8,16.
>You can have realtime vst send across submixes and receive on any channel.
>So you can mix as many audio tracks and sum them to a specific paris audio
>track.
>This way you can compress all drumtracks with a vst plugin and even across
>submixes.
>You can also use a DX reverb ,stereo, and send any Paris audio track from
>any submix to this reverb...
>I was afraid though with this strange behaviour regarding the cards burn-out
>thing.
>If you could get this senderella which is free and open source and use it
>in conjuction with Paris or even make it better for Paris users that would
>be a must try out project !!
>Regards,
>Dimitrios
>
>"Mike Audet" <mike@...> wrote:
>>
>>Hi Dimitrios,
>>
>>Thanks for this post. Can you remember who said that the transfer settings
>>could harm the eds cards? From what I gather, the chip that handles DMA
>>is the same chip that processes audio. It should be able to handle working
>>full out just the same as the other eds chips can.
>>
>>I'm very interested in investigating this.
>>
>>All the best,
>>
>>Mike
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote:
>>>
>>>Hi Mike !
>>>You are talking for lower latencies in Paris driver...
>>>There is a vst plugin , forget the name right now, that acts as as bus
>insert
>>>across submixes for vst.
>>>The only way that this would work realtime without chopped audio was if
>>we
>>>put edstransfer 8,8 or even 8,16.
>>>So this edstransfer thing maybe can be fixed by you noting that.
>>>I have read that this edstransfer value make eds cards work harder thus
>>increasing
>>>the temperature and eventually burn out more easily the cards.
>>>Please look at it because this plugin was a godsend for Paris and could
>>help
>>>in putting a vst reverb plugin across all submixes !!
>>>Regards and Happy New Year
>>>Dimitrios
>>
>
Re: For Mike Audet some thoughts that might help ! [message #102093 is a reply to message #102091] Wed, 14 January 2009 07:54 Go to previous message
Ted Gerber is currently offline  Ted Gerber   
Messages: 705
Registered: January 2009
Senior Member
"Mike Audet" <mike@...> wrote:
>
I'll email ....rali to see if I can get any more info.

nudge nudge wink wink
Previous Topic: Scherzo beta 1.31
Next Topic: A Grand for free!
Goto Forum:
  


Current Time: Sun Dec 15 19:21:59 PST 2024

Total time taken to generate the page: 0.07906 seconds