Home » The PARIS Forums » PARIS: Main » Paris Question: Driver problems
|
|
|
|
| Re: Paris Question: Driver problems [message #77138 is a reply to message #77136] |
Sat, 16 December 2006 17:18   |
emarenot
Messages: 345
Registered: June 2005
|
Senior Member |
|
|
This is a multi-part message in MIME format.
------=_NextPart_000_000A_01C72136.265C9220
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hey Rob,
Thanks for responding. I should have mentioned: Win98SE... and no, no "!"
or "?" shows up in the device manager. In fact, the driver is listed. But,
I have to "remove" the bugger before shutting down, so that, when I reboot
the computer it see's the driver and loads it. If I don't do this, Paris
will not load. I get an error message "error 61d/something." The EDS card
is on IRQ3 and shares it only with the APCI thingy. Once I go through this
reloading-the-driver-procedure, all is well, Paris runs and is happy.
MR
"Rob Arsenault" <mani1147 AT hotmail.com> wrote in message
news:4584659e@linux...
Strange....!!
Does the driver show up with a "!" or a "?" in the device manager ? What
OS you running?
Rob
"Mike R." <emarenot@yahoo.com> wrote in message news:45840d3c$1@linux...
Any ideas on why I have to reload my Paris drivers everytime I boot the
program? I'm running the EDS card on an Asus A7S333, PCI slot 3. Vid card
is slot one, slot two is blank to make room for the EDS daughter card. I
did try to reinstall Paris (2.0), but that did not seem to fix the problem.
Thanks gents.
MR
------=_NextPart_000_000A_01C72136.265C9220
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1555" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hey Rob,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for responding. I should =
have=20
mentioned: Win98SE... and no, no "!" or "?" shows up in the device=20
manager. In fact, the driver is listed. But, I have to =
"remove" the=20
bugger before shutting down, so that, when I reboot the computer it =
see's the=20
driver and loads it. If I don't do this, Paris will not =
load. I get=20
an error message "error 61d/something." The EDS card is on IRQ3 =
and shares=20
it only with the APCI thingy. Once I go through this=20
reloading-the-driver-procedure, all is well, Paris runs and is=20
happy.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>MR</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Rob Arsenault" <mani1147 AT hotmail.com> wrote in message =
<A=20
href=3D"news:4584659e@linux">news:4584659e@linux</A>...</DIV>
<DIV><FONT size=3D2>Strange....!! </FONT></DIV>
<DIV><FONT size=3D2>Does the driver show up with a "!" or a "?" =
in the=20
device manager ? What OS you running?</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Rob</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Mike R." <<A=20
href=3D"mailto:emarenot@yahoo.com">emarenot@yahoo.com</A>> wrote =
in message=20
<A href=3D"news:45840d3c$1@linux">news:45840d3c$1@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Any ideas on why I have to reload =
my Paris=20
drivers everytime I boot the program? I'm running the EDS card =
on an=20
Asus A7S333, PCI slot 3. Vid card is slot one, slot two is =
blank to=20
make room for the EDS daughter card. I did try to reinstall =
Paris=20
(2.0), but that did not seem to fix the problem. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Thanks gents.</FONT></DIV>
<DIV><FONT face=3DArial=20
size=3D2>MR</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY ></HTML>
------=_NextPart_000_000A_01C72136.265C9220--
|
|
|
|
| Re: Paris Question: Driver problems [message #77143 is a reply to message #77138] |
Sat, 16 December 2006 19:41 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
Can you reserve an IRQ in the BIOS as a Legacy Device and Turn off PNP in
the BIOS too? Does the manual say if Slot 3 shares with anything else?
"Mike R." <emarenot@yahoo.com> wrote:
>
>
>Hey Rob,
>Thanks for responding. I should have mentioned: Win98SE... and no, no "!"
>or "?" shows up in the device manager. In fact, the driver is listed.
But,
>I have to "remove" the bugger before shutting down, so that, when I reboot
>the computer it see's the driver and loads it. If I don't do this, Paris
>will not load. I get an error message "error 61d/something." The EDS card
>is on IRQ3 and shares it only with the APCI thingy. Once I go through this
>reloading-the-driver-procedure, all is well, Paris runs and is happy.
>MR
> "Rob Arsenault" <mani1147 AT hotmail.com> wrote in message
>news:4584659e@linux...
> Strange....!!
> Does the driver show up with a "!" or a "?" in the device manager ? What
>OS you running?
>
> Rob
> "Mike R." <emarenot@yahoo.com> wrote in message news:45840d3c$1@linux...
> Any ideas on why I have to reload my Paris drivers everytime I boot
the
>program? I'm running the EDS card on an Asus A7S333, PCI slot 3. Vid card
>is slot one, slot two is blank to make room for the EDS daughter card.
I
>did try to reinstall Paris (2.0), but that did not seem to fix the problem.
> Thanks gents.
> MR
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1555" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Hey Rob,</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Thanks for responding. I should =
>have=20
>mentioned: Win98SE... and no, no "!" or "?" shows up in the device=20
>manager. In fact, the driver is listed. But, I have to =
>"remove" the=20
>bugger before shutting down, so that, when I reboot the computer it =
>see's the=20
>driver and loads it. If I don't do this, Paris will not =
>load. I get=20
>an error message "error 61d/something." The EDS card is on IRQ3 =
>and shares=20
>it only with the APCI thingy. Once I go through this=20
>reloading-the-driver-procedure, all is well, Paris runs and is=20
>happy.</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>MR</FONT></DIV>
><BLOCKQUOTE dir=3Dltr=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Rob Arsenault" <mani1147 AT hotmail.com> wrote in message =
><A=20
> href=3D"news:4584659e@linux">news:4584659e@linux</A>...</DIV>
> <DIV><FONT size=3D2>Strange....!! </FONT></DIV>
> <DIV><FONT size=3D2>Does the driver show up with a "!" or a "?" =
>in the=20
> device manager ? What OS you running?</FONT></DIV>
> <DIV><FONT size=3D2></FONT> </DIV>
> <DIV><FONT size=3D2>Rob</FONT></DIV>
> <BLOCKQUOTE dir=3Dltr=20
> style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Mike R." <<A=20
> href=3D"mailto:emarenot@yahoo.com">emarenot@yahoo.com</A>> wrote =
>in message=20
> <A href=3D"news:45840d3c$1@linux">news:45840d3c$1@linux</A>...</DIV>
> <DIV><FONT face=3DArial size=3D2>Any ideas on why I have to reload =
>my Paris=20
> drivers everytime I boot the program? I'm running the EDS card =
>on an=20
> Asus A7S333, PCI slot 3. Vid card is slot one, slot two is =
>blank to=20
> make room for the EDS daughter card. I did try to reinstall =
>Paris=20
> (2.0), but that did not seem to fix the problem. </FONT></DIV>
> <DIV><FONT face=3DArial size=3D2>Thanks gents.</FONT></DIV>
> <DIV><FONT face=3DArial=20
>size=3D2>MR</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY ></HTML>
>
>
|
|
|
|
|
|
| Re: Paris Question: Driver problems [message #77154 is a reply to message #77143] |
Sun, 17 December 2006 15:03 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
I have that mobo, and it seems like that slot shares IRQ with another
onboard resource.. perhaps USB or onboard sound card. I don't recall, WinXP
doesn't care and I use every single slot on my A7s333. I'd move the EDS card
down one slot to #4 and see what happens, or if you have good enough airflow
and a normal (not stacked/giant fan&heatsink) video card, It should not be
an issue at all running it in the 2nd PCI slot.
FWIW, I used 3 EDS cards on that mobo at one time using WinME.
AA
"John" <no@no.com> wrote in message news:4584ae53$1@linux...
>
> Can you reserve an IRQ in the BIOS as a Legacy Device and Turn off PNP in
> the BIOS too? Does the manual say if Slot 3 shares with anything else?
>
>
>
> "Mike R." <emarenot@yahoo.com> wrote:
>>
>>
>>Hey Rob,
>>Thanks for responding. I should have mentioned: Win98SE... and no, no "!"
>>or "?" shows up in the device manager. In fact, the driver is listed.
> But,
>>I have to "remove" the bugger before shutting down, so that, when I reboot
>>the computer it see's the driver and loads it. If I don't do this, Paris
>>will not load. I get an error message "error 61d/something." The EDS
>>card
>>is on IRQ3 and shares it only with the APCI thingy. Once I go through
>>this
>>reloading-the-driver-procedure, all is well, Paris runs and is happy.
>>MR
>> "Rob Arsenault" <mani1147 AT hotmail.com> wrote in message
>>news:4584659e@linux...
>> Strange....!!
>> Does the driver show up with a "!" or a "?" in the device manager ? What
>>OS you running?
>>
>> Rob
>> "Mike R." <emarenot@yahoo.com> wrote in message
>> news:45840d3c$1@linux...
>> Any ideas on why I have to reload my Paris drivers everytime I boot
> the
>>program? I'm running the EDS card on an Asus A7S333, PCI slot 3. Vid
>>card
>>is slot one, slot two is blank to make room for the EDS daughter card.
> I
>>did try to reinstall Paris (2.0), but that did not seem to fix the
>>problem.
>> Thanks gents.
>> MR
>>
>>
>><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>><HTML><HEAD>
>><META http-equiv=3DContent-Type content=3D"text/html; =
>>charset=3Diso-8859-1">
>><META content=3D"MSHTML 6.00.2800.1555" name=3DGENERATOR>
>><STYLE></STYLE>
>></HEAD>
>><BODY bgColor=3D#ffffff>
>><DIV><FONT face=3DArial size=3D2>Hey Rob,</FONT></DIV>
>><DIV><FONT face=3DArial size=3D2>Thanks for responding. I should =
>>have=20
>>mentioned: Win98SE... and no, no "!" or "?" shows up in the device=20
>>manager. In fact, the driver is listed. But, I have to =
>>"remove" the=20
>>bugger before shutting down, so that, when I reboot the computer it =
>>see's the=20
>>driver and loads it. If I don't do this, Paris will not =
>>load. I get=20
>>an error message "error 61d/something." The EDS card is on IRQ3 =
>>and shares=20
>>it only with the APCI thingy. Once I go through this=20
>>reloading-the-driver-procedure, all is well, Paris runs and is=20
>>happy.</FONT></DIV>
>><DIV><FONT face=3DArial size=3D2>MR</FONT></DIV>
>><BLOCKQUOTE dir=3Dltr=20
>>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>> <DIV>"Rob Arsenault" <mani1147 AT hotmail.com> wrote in message =
>><A=20
>> href=3D"news:4584659e@linux">news:4584659e@linux</A>...</DIV>
>> <DIV><FONT size=3D2>Strange....!! </FONT></DIV>
>> <DIV><FONT size=3D2>Does the driver show up with a "!" or a "?" =
>>in the=20
>> device manager ? What OS you running?</FONT></DIV>
>> <DIV><FONT size=3D2></FONT> </DIV>
>> <DIV><FONT size=3D2>Rob</FONT></DIV>
>> <BLOCKQUOTE dir=3Dltr=20
>> style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>> <DIV>"Mike R." <<A=20
>> href=3D"mailto:emarenot@yahoo.com">emarenot@yahoo.com</A>> wrote =
>>in message=20
>> <A href=3D"news:45840d3c$1@linux">news:45840d3c$1@linux</A>...</DIV>
>> <DIV><FONT face=3DArial size=3D2>Any ideas on why I have to reload =
>>my Paris=20
>> drivers everytime I boot the program? I'm running the EDS card =
>>on an=20
>> Asus A7S333, PCI slot 3. Vid card is slot one, slot two is =
>>blank to=20
>> make room for the EDS daughter card. I did try to reinstall =
>>Paris=20
>> (2.0), but that did not seem to fix the problem. </FONT></DIV>
>> <DIV><FONT face=3DArial size=3D2>Thanks gents.</FONT></DIV>
>> <DIV><FONT face=3DArial=20
>>size=3D2>MR</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY ></HTML>
>>
>>
>
|
|
|
|
| Re: Paris Question: Driver problems [message #77162 is a reply to message #77154] |
Sun, 17 December 2006 21:21 |
emarenot
Messages: 345
Registered: June 2005
|
Senior Member |
|
|
Thanks for the responses.
Yah, Win 98 does have a system info applet. My card shares an IRQ with
something called "ACPI IRQ holder for PCI IRQ steering" whatever the F that
means/is. Will shifting the EDS card to a new PCI slot shift the IRQ
assignment? Part of the reason I've not tried a move is that I'm afraid it
will and I'll have to go through a song and dance routine to get the EDS
card on an unpopulated IRQ. Aaron -you've got three EDS cards on that
A7S -pretty amazing. How do you keep it cool in there?
Thanks again for the help all.
MR
"Aaron Allen" <know-spam@not_here.dude> wrote in message
news:4585ca22$1@linux...
> I have that mobo, and it seems like that slot shares IRQ with another
> onboard resource.. perhaps USB or onboard sound card. I don't recall,
WinXP
> doesn't care and I use every single slot on my A7s333. I'd move the EDS
card
> down one slot to #4 and see what happens, or if you have good enough
airflow
> and a normal (not stacked/giant fan&heatsink) video card, It should not be
> an issue at all running it in the 2nd PCI slot.
> FWIW, I used 3 EDS cards on that mobo at one time using WinME.
>
> AA
>
>
> "John" <no@no.com> wrote in message news:4584ae53$1@linux...
> >
> > Can you reserve an IRQ in the BIOS as a Legacy Device and Turn off PNP
in
> > the BIOS too? Does the manual say if Slot 3 shares with anything else?
> >
> >
> >
> > "Mike R." <emarenot@yahoo.com> wrote:
> >>
> >>
> >>Hey Rob,
> >>Thanks for responding. I should have mentioned: Win98SE... and no, no
"!"
> >>or "?" shows up in the device manager. In fact, the driver is listed.
> > But,
> >>I have to "remove" the bugger before shutting down, so that, when I
reboot
> >>the computer it see's the driver and loads it. If I don't do this,
Paris
> >>will not load. I get an error message "error 61d/something." The EDS
> >>card
> >>is on IRQ3 and shares it only with the APCI thingy. Once I go through
> >>this
> >>reloading-the-driver-procedure, all is well, Paris runs and is happy.
> >>MR
> >> "Rob Arsenault" <mani1147 AT hotmail.com> wrote in message
> >>news:4584659e@linux...
> >> Strange....!!
> >> Does the driver show up with a "!" or a "?" in the device manager ?
What
> >>OS you running?
> >>
> >> Rob
> >> "Mike R." <emarenot@yahoo.com> wrote in message
> >> news:45840d3c$1@linux...
> >> Any ideas on why I have to reload my Paris drivers everytime I boot
> > the
> >>program? I'm running the EDS card on an Asus A7S333, PCI slot 3. Vid
> >>card
> >>is slot one, slot two is blank to make room for the EDS daughter card.
> > I
> >>did try to reinstall Paris (2.0), but that did not seem to fix the
> >>problem.
> >> Thanks gents.
> >> MR
> >>
> >>
> >><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> >><HTML><HEAD>
> >><META http-equiv=3DContent-Type content=3D"text/html; =
> >>charset=3Diso-8859-1">
> >><META content=3D"MSHTML 6.00.2800.1555" name=3DGENERATOR>
> >><STYLE></STYLE>
> >></HEAD>
> >><BODY bgColor=3D#ffffff>
> >><DIV><FONT face=3DArial size=3D2>Hey Rob,</FONT></DIV>
> >><DIV><FONT face=3DArial size=3D2>Thanks for responding. I should =
> >>have=20
> >>mentioned: Win98SE... and no, no "!" or "?" shows up in the device=20
> >>manager. In fact, the driver is listed. But, I have to =
> >>"remove" the=20
> >>bugger before shutting down, so that, when I reboot the computer it =
> >>see's the=20
> >>driver and loads it. If I don't do this, Paris will not =
> >>load. I get=20
> >>an error message "error 61d/something." The EDS card is on IRQ3 =
> >>and shares=20
> >>it only with the APCI thingy. Once I go through this=20
> >>reloading-the-driver-procedure, all is well, Paris runs and is=20
> >>happy.</FONT></DIV>
> >><DIV><FONT face=3DArial size=3D2>MR</FONT></DIV>
> >><BLOCKQUOTE dir=3Dltr=20
> >>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
> >>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> >> <DIV>"Rob Arsenault" <mani1147 AT hotmail.com> wrote in message =
> >><A=20
> >> href=3D"news:4584659e@linux">news:4584659e@linux</A>...</DIV>
> >> <DIV><FONT size=3D2>Strange....!! </FONT></DIV>
> >> <DIV><FONT size=3D2>Does the driver show up with a "!" or a "?" =
> >>in the=20
> >> device manager ? What OS you running?</FONT></DIV>
> >> <DIV><FONT size=3D2></FONT> </DIV>
> >> <DIV><FONT size=3D2>Rob</FONT></DIV>
> >> <BLOCKQUOTE dir=3Dltr=20
> >> style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
> >>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> >> <DIV>"Mike R." <<A=20
> >> href=3D"mailto:emarenot@yahoo.com">emarenot@yahoo.com</A>> wrote =
> >>in message=20
> >> <A href=3D"news:45840d3c$1@linux">news:45840d3c$1@linux</A>...</DIV>
> >> <DIV><FONT face=3DArial size=3D2>Any ideas on why I have to reload =
> >>my Paris=20
> >> drivers everytime I boot the program? I'm running the EDS card =
> >>on an=20
> >> Asus A7S333, PCI slot 3. Vid card is slot one, slot two is =
> >>blank to=20
> >> make room for the EDS daughter card. I did try to reinstall =
> >>Paris=20
> >> (2.0), but that did not seem to fix the problem. </FONT></DIV>
> >> <DIV><FONT face=3DArial size=3D2>Thanks gents.</FONT></DIV>
> >> <DIV><FONT face=3DArial=20
> >>size=3D2>MR</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY ></HTML>
> >>
> >>
> >
>
>
|
|
|
|
Goto Forum:
Current Time: Tue Nov 26 00:37:41 PST 2024
Total time taken to generate the page: 0.01887 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
