The PARIS Forums: PARIS: Main » I got Paris up and running but----my added pluggins

Home » The PARIS Forums » PARIS: Main » I got Paris up and running but----my added pluggins

Show: Today's Messages :: Polls :: Message Navigator

I got Paris up and running but----my added pluggins [message #102770]

Mon, 09 March 2009 13:00

gye

Messages: 7
Registered: February 2009

Junior Member

Hi all,

I bought the skunkworks pluggins---Limiter EQ---etc----It has been so long
that I cannot locate them on anything I have. How can I get a hold of them
to get these again?

And Don--thx for all the help

Report message to a moderator

Re: I got Paris up and running but----my added pluggins [message #102771 is a reply to message #102770]

Mon, 09 March 2009 13:10

gye

Messages: 7
Registered: February 2009

Junior Member

I bought the bundle a while ago--I really would like to get the no limit
back and all the others I had.. I payed for them and can probably go find
the reciept somewhere

"gye" <gyefing@gmail.com> wrote in message news:49b57a3d@linux...
> Hi all,
>
> I bought the skunkworks pluggins---Limiter EQ---etc----It has been so long
> that I cannot locate them on anything I have. How can I get a hold of them
> to get these again?
>
>
> And Don--thx for all the help
>

Report message to a moderator

Re: I got Paris up and running but----my added pluggins [message #102772 is a reply to message #102771]

Mon, 09 March 2009 13:21

gye

Messages: 7
Registered: February 2009

Junior Member

http://www.ensoniq.ca I went here and sent a message to see if they could
help.
"gye" <gyefing@gmail.com> wrote in message news:49b57c74@linux...
>I bought the bundle a while ago--I really would like to get the no limit
>back and all the others I had.. I payed for them and can probably go find
>the reciept somewhere
>
> "gye" <gyefing@gmail.com> wrote in message news:49b57a3d@linux...
>> Hi all,
>>
>> I bought the skunkworks pluggins---Limiter EQ---etc----It has been so
>> long that I cannot locate them on anything I have. How can I get a hold
>> of them to get these again?
>>
>>
>> And Don--thx for all the help
>>
>
>

Report message to a moderator

Re: I got Paris up and running but----my added pluggins [message #102773 is a reply to message #102772]

Mon, 09 March 2009 14:30

kerryg

Messages: 1529
Registered: February 2009

Senior Member
Administrator

Hi gye - Chuck released the Skunkworks plugs "into the wild" a while back. Go to http://www.parisfaqs.com/ - scroll down about half way and look for a header that says "PC specific stuff...". You'll find them there.

Mike has also taken NoLimit and developed it further; his new version is purchasable at http://www.ensoniq.ca/.

"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon

Report message to a moderator

Re: I got Paris up and running but----my added pluggins [message #102774 is a reply to message #102773]

Sun, 08 March 2009 16:50

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

Hi Gye,

Mike's addition to NoLimit is that there are meters and
a mix control to allow the dry signal to be combined with
the limited one. That's huge!!! I love Mike's changes to
all of our existing plugs. They are well worth the money
when you're ready to get serious with Paris. It allows
a new level of control.

Good luck with your rig.

Tom

"Administrator" <kg@kerrygalloway.com> wrote in message
news:49b58f3b@linux...
> Hi gye - Chuck released the Skunkworks plugs "into the wild" a while
> back. Go to http://www.parisfaqs.com/ - scroll down about half way and
> look for a header that says "PC specific stuff...". You'll find them
> there.
> Mike has also taken NoLimit and developed it further; his new version is
> purchasable at http://www.ensoniq.ca/..
>
>
> --------------------------
> :: [ posted via the PARISForums ] ::
> :: kerrygalloway.com/ParisForums/ ::
> --------------------------

Report message to a moderator

Re: I got Paris up and running but----my added pluggins [message #102783 is a reply to message #102774]

Tue, 10 March 2009 06:42

gye

Messages: 7
Registered: February 2009

Junior Member

Hey,

After going to Mikes site I saw that he had further developed and also has a
stable driver for XP---This is good news. I have been using PARIS for the
last 9 years and have still been using the WinSE environment and have been
looking for years for a comparible replacement and I still have not found
one. I may just migrate to XP and get another 9 years:)

BTW--I am pretty serious about PARIS(I am still one of the original
adopters)--I have a MEC with 16 inputs and a spare MEC and card just incase
that one fails-----

That is a testament to PARIS--I have had my head down recording for the last
9 years----

I will be using My spare MEC and upgrade to Mikes XP driver and slowly
tranfer over to the new machine.

I can't wait to try Mikes version of NoLimit

Again thx for all the help--This forum is still kicking ass 9 years later:)

Mike kicks ass also, he was very responsive aqnd informative.

"Tom Bruhl" <arpegio@comcast.net> wrote in message news:49b5a1f5$1@linux...
> Hi Gye,
>
> Mike's addition to NoLimit is that there are meters and
> a mix control to allow the dry signal to be combined with
> the limited one. That's huge!!! I love Mike's changes to
> all of our existing plugs. They are well worth the money
> when you're ready to get serious with Paris. It allows
> a new level of control.
>
> Good luck with your rig.
>
> Tom
>
>
>
>
> "Administrator" <kg@kerrygalloway.com> wrote in message
> news:49b58f3b@linux...
>> Hi gye - Chuck released the Skunkworks plugs "into the wild" a while
>> back. Go to http://www.parisfaqs.com/ - scroll down about half way and
>> look for a header that says "PC specific stuff...". You'll find them
>> there.
>> Mike has also taken NoLimit and developed it further; his new version is
>> purchasable at http://www.ensoniq.ca/..
>>
>>
>> --------------------------
>> :: [ posted via the PARISForums ] ::
>> :: kerrygalloway.com/ParisForums/ ::
>> --------------------------
>
>

Report message to a moderator

Re: I got Paris up and running but----my added pluggins [message #102787 is a reply to message #102783]

Tue, 10 March 2009 20:24

Ted Gerber

Messages: 705
Registered: January 2009

Senior Member

: )

"gye" <gyefing@gmail.com> wrote:
>Hey,
>
>After going to Mikes site I saw that he had further developed and also has
a
>stable driver for XP---This is good news. I have been using PARIS for the

>last 9 years and have still been using the WinSE environment and have been

>looking for years for a comparible replacement and I still have not found

>one. I may just migrate to XP and get another 9 years:)
>
>BTW--I am pretty serious about PARIS(I am still one of the original
>adopters)--I have a MEC with 16 inputs and a spare MEC and card just incase

>that one fails-----
>
>That is a testament to PARIS--I have had my head down recording for the
last
>9 years----
>
>I will be using My spare MEC and upgrade to Mikes XP driver and slowly
>tranfer over to the new machine.
>
>I can't wait to try Mikes version of NoLimit
>
>Again thx for all the help--This forum is still kicking ass 9 years later:)
>
>
>"Tom Bruhl" <arpegio@comcast.net> wrote in message news:49b5a1f5$1@linux...
>> Hi Gye,
>>
>> Mike's addition to NoLimit is that there are meters and
>> a mix control to allow the dry signal to be combined with
>> the limited one. That's huge!!! I love Mike's changes to
>> all of our existing plugs. They are well worth the money
>> when you're ready to get serious with Paris. It allows
>> a new level of control.
>>
>> Good luck with your rig.
>>
>> Tom
>>
>>
>>
>>
>> "Administrator" <kg@kerrygalloway.com> wrote in message
>> news:49b58f3b@linux...
>>> Hi gye - Chuck released the Skunkworks plugs "into the wild" a while

>>> back. Go to http://www.parisfaqs.com/ - scroll down about half way and

>>> look for a header that says "PC specific stuff...". You'll find them

>>> there.
>>> Mike has also taken NoLimit and developed it further; his new version
is
>>> purchasable at http://www.ensoniq.ca/..
>>>
>>>
>>> --------------------------
>>> :: [ posted via the PARISForums ] ::
>>> :: kerrygalloway.com/ParisForums/ ::
>>> --------------------------
>>
>>
>
>

Report message to a moderator

Previous Topic:	Need help installing Paris onto a PC with XPPro
Next Topic:	PAF support in REAPER in final testing now (PARIS/REAPER testers probably needed soon!)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 07 03:48:02 PST 2024

Total time taken to generate the page: 0.16827 seconds