|
|
| Re: Why does my mic keep cutting off? [message #65767 is a reply to message #65766] |
Sun, 26 March 2006 21:12  |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
I've seen bad phantom power supplies do that. Could be a shorted XLR cable
(jamming the phantom power to ground/low voltage) causing it to drop out as
well, different problem/same effect. As well, I had a CAD condensor that
does that when you hit it hard with sound, probably lousy design on that
one... not likely on a C1, but worth mentioning.
Trouble shoot it down to the last variable using known good replacement
equipment, and you'll find your culprit I bet.
AA
"Bender" <cml888@comcast.net> wrote in message news:442774cb@linux...
> Hello everyone ... I've been a PARIS user for 5 years, even though this
> problem is not PARIS related. Anyway... what would cause my SP C1
> condenser to suddenly just cut out? I'm not sure if it's the mic, cable,
> or somewhere else in the front end, but all i have to do to fix it is
> unplug the cord from the mic & plug it back in, and the signal just "pops"
> back on. It's not constant, but maybe once a day. Incidentally, I had
> the same problem with a previous condenser/preamp combo, which makes me
> wonder if it's the mic at all. The signal goes ... mic/pre/limiter/paris.
> Any ideas?
>
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
