The PARIS Forums: PARIS: Main » Paris with VSTI support working solution !

Home » The PARIS Forums » PARIS: Main » Paris with VSTI support working solution !

Show: Today's Messages :: Polls :: Message Navigator

Paris with VSTI support working solution ! [message #80440]

Wed, 21 February 2007 10:53

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

At last I have managed to do it ...
Only way I could configure it is the following.
I used a normal usb midi interface and midioverlan software midi.
I also used console DX/VST wrapper which is the only one that can configure
midi ports in and out from within as a vst plugin !
So by letting Paris be master via midioverlan to Cubase on a second computer
, although on same computer with pipes (midioverlan) could be done too...
Then Opening console on a paris audio track and putting an empty 16bit or
24 bot wavefile you open console and configure the usbmidi input as midi0
for console, then open the VSTI you have installed in your Paris rig and
connect them with wires (like with Paris patchbay) and voila your cuabse
send midi sequence that is read by your VSTI inside Paris and audio output
stays in Paris.
Sounds complicated but it works.
It has a big delay (meaning you cannot play live but you can play it inside
Cubase and then let just cubase follow Paris MTC and compensate for delay
by moving ahead of time the cubase midi tracks or offest mtc...
Regards,
Dimitrios

Report message to a moderator

Re: Paris with VSTI support working solution ! [message #80441 is a reply to message #80440]

Wed, 21 February 2007 10:56

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Please note that youer Cubase computer must have a hardware midi to which
will connect to usbmidi hardware of Paris .
So to summarize you need two hardware midi interfaces one for each computer.
Maybe you can also make them work mtc connected with only these two midi
interfaces but I am using midioverlan and I am extremely happy with it...
Regards,
Dimitrios

"Dimitrios" <musurgio@otenet.gr> wrote:
>
>At last I have managed to do it ...
>Only way I could configure it is the following.
>I used a normal usb midi interface and midioverlan software midi.
>I also used console DX/VST wrapper which is the only one that can configure
>midi ports in and out from within as a vst plugin !
>So by letting Paris be master via midioverlan to Cubase on a second computer
>, although on same computer with pipes (midioverlan) could be done too...
>Then Opening console on a paris audio track and putting an empty 16bit or
>24 bot wavefile you open console and configure the usbmidi input as midi0
>for console, then open the VSTI you have installed in your Paris rig and
>connect them with wires (like with Paris patchbay) and voila your cuabse
>send midi sequence that is read by your VSTI inside Paris and audio output
>stays in Paris.
>Sounds complicated but it works.
>It has a big delay (meaning you cannot play live but you can play it inside
>Cubase and then let just cubase follow Paris MTC and compensate for delay
>by moving ahead of time the cubase midi tracks or offest mtc...
>Regards,
>Dimitrios

Report message to a moderator

Previous Topic:	UAD And TC Powercore Together?
Next Topic:	Great River NV Question

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Mar 22 22:18:31 PDT 2025

Total time taken to generate the page: 0.06302 seconds