The PARIS Forums: PARIS: Main

Home » The PARIS Forums » PARIS: Main » Help! Error 1/1

Show: Today's Messages :: Polls :: Message Navigator

Help! Error 1/1 [message #69887]

Sun, 02 July 2006 09:48

Mike Audet
Messages: 294
Registered: December 2008

Senior Member

Hi All,

I did a search and tried reinstalling both the drivers and the PARIS app/effects
subsystem, but I keep getting the error 1/1 when I launch PARIS in XP.

I'm at a loss.

All help appreciated!

Mike

Report message to a moderator

Re: Help! Error 1/1 [message #69888 is a reply to message #69887]

Sun, 02 July 2006 09:53

Mike Audet
Messages: 294
Registered: December 2008

Senior Member

I shoould give some more details.

I decided to replace my old 80 GB Maxtor before if forced me to, and I reinstalled
Windows XP from scratch.

I have a Windows 98 partition, and from there, PARIS works perfectly. So,
I know that the cards are seated properly, connections are good, etc. The
drivers show up in the device manager in XP ok. Everything looks good except
the 1/1 error.

I'm afraid I might just be beat.

Thanks for any suggestions!

Mike

"Mike Audet" <mike@mikeF-SPAMaudet.com> wrote:
>
>Hi All,
>
>I did a search and tried reinstalling both the drivers and the PARIS app/effects
>subsystem, but I keep getting the error 1/1 when I launch PARIS in XP.
>
>I'm at a loss.
>
>All help appreciated!
>
>Mike

Report message to a moderator

Re: Help! Error 1/1 [message #69892 is a reply to message #69888]

Sun, 02 July 2006 11:51

John [1]
Messages: 2229
Registered: September 2005

Senior Member

If this is any help here's my paris.cfg in xp. I'm pretty stable now after
getting my mb irqs correctly labeled in the manual so I know what slot shares
with what? BTW, I don't put paris on anything that shares and in bios i
reserve those slots and IRQ3 for my 2 EDS cards and I turn off lpt1, usb
and serial.

*** PARIS Configuration ***

*** ENGINE configuration parameters ***
* Cache Size in MB
CacheSize=128

* Overview cache size in KB
OvwCacheSize=8192

* I/O configuration
IOSize=256

* SubMix Cache Size in KB
SubMixCacheSize=256

ManualRecDelay=16384

RecXFadeLen=20
Use32BitWinMTC=0

DisableDirectX=0

MasterOutputCard=0

ScrubMaxRate=1

WheelSensitivity=20

WheelInertia=68

CSProVersion=ABCDEFGH

VSTDirectory=C:\Program Files\steinberg\vstplugins\

MIDIPlayDisabled=1

Report message to a moderator

Re: Help! Error 1/1 [message #69912 is a reply to message #69892]

Mon, 03 July 2006 05:20

John
Messages: 39
Registered: May 2006

Member

Also, I have two drives. My xp drive that is UDMA4 and my audio drive that
is formated with /64 option (i think that's 32k clusters). After xp is installed,
i run the install for the scherzo drivers, then Paris install, then the
effects subsystem. I do about 30 tweaks after that. (i can post em if you
still have no luck).

Report message to a moderator

Re: Help! Error 1/1 [message #69927 is a reply to message #69912]

Mon, 03 July 2006 12:03

Mike Audet
Messages: 294
Registered: December 2008

Senior Member

Hi John,

Thanks for all your suggestions.

I finally got it sorted out.

The weird part is that no matter what I did, I could not get PARIS to work
under XP with a fresh install of windows XP. I guess the moral of the story
is .... GHOST!!! I moved cards around, used different XP disks - nothing
would beat the error 1/1.

Also, if you have several partitions like I do, you need to use the -FDSP
parameter when launching the DOS GHOST.exe from the floppy to maintain your
drive letters. Not doing that made things a nightmare for a while. I'm
so glad this is behind me.

All the best,

Mike

"John" <no@hi.com> wrote:
>
>Also, I have two drives. My xp drive that is UDMA4 and my audio drive that
>is formated with /64 option (i think that's 32k clusters). After xp is
installed,
>i run the install for the scherzo drivers, then Paris install, then the
>effects subsystem. I do about 30 tweaks after that. (i can post em if
you
>still have no luck).
>
>

Report message to a moderator

Re: Help! Error 1/1 [message #69932 is a reply to message #69927]

Mon, 03 July 2006 15:36

John [1]
Messages: 2229
Registered: September 2005

Senior Member

Glad your jamming again.

John

"Mike Audet" <mike@mikeF-SPAMaudet.com> wrote:
>
>Hi John,
>
>Thanks for all your suggestions.
>
>I finally got it sorted out.
>
>The weird part is that no matter what I did, I could not get PARIS to work
>under XP with a fresh install of windows XP. I guess the moral of the story
>is .... GHOST!!! I moved cards around, used different XP disks - nothing
>would beat the error 1/1.
>
>Also, if you have several partitions like I do, you need to use the -FDSP
>parameter when launching the DOS GHOST.exe from the floppy to maintain your
>drive letters. Not doing that made things a nightmare for a while. I'm
>so glad this is behind me.
>
>All the best,
>
>Mike
>
>
>"John" <no@hi.com> wrote:
>>
>>Also, I have two drives. My xp drive that is UDMA4 and my audio drive
that
>>is formated with /64 option (i think that's 32k clusters). After xp is
>installed,
>>i run the install for the scherzo drivers, then Paris install, then the
>>effects subsystem. I do about 30 tweaks after that. (i can post em if
>you
>>still have no luck).
>>
>>
>

Report message to a moderator

Previous Topic:	OT: KaKi King - This is pretty cool
Next Topic:	OT: a little IRS humor

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 05:19:23 PST 2024

Total time taken to generate the page: 0.01792 seconds