The PARIS Forums


Home » The PARIS Forums » PARIS: Main » importing PAFs into Reaper
importing PAFs into Reaper [message #70601] Thu, 27 July 2006 14:32 Go to next message
Don Nafe is currently offline  Don Nafe   UNITED STATES
Messages: 1206
Registered: July 2005
Senior Member
The developer for reaper is looking for any documentation on PAF
files...does anyone have any info or the name of the guy who did the PAF to
Wav converter handy?

thanks

Don
Re: importing PAFs into Reaper [message #70602 is a reply to message #70601] Thu, 27 July 2006 14:38 Go to previous messageGo to next message
Don Nafe is currently offline  Don Nafe   UNITED STATES
Messages: 1206
Registered: July 2005
Senior Member
He's also looking for any PPJ documentation if there is any

D

"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
> The developer for reaper is looking for any documentation on PAF
> files...does anyone have any info or the name of the guy who did the PAF
> to Wav converter handy?
>
> thanks
>
> Don
>
>
>
Re: importing PAFs into Reaper [message #70607 is a reply to message #70601] Thu, 27 July 2006 17:29 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
That's probably the guys at ID. I know an XP convertor was ported at some
point, name escapes on who though. You might also hit up Chuck Duffy on that
question, or Matt Craig if anyone has been able to locate him.

AA


"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
> The developer for reaper is looking for any documentation on PAF
> files...does anyone have any info or the name of the guy who did the PAF
> to Wav converter handy?
>
> thanks
>
> Don
>
>
>


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
Re: importing PAFs into Reaper [message #70608 is a reply to message #70607] Thu, 27 July 2006 17:38 Go to previous messageGo to next message
Don Nafe is currently offline  Don Nafe   UNITED STATES
Messages: 1206
Registered: July 2005
Senior Member
Thanks Aaron

Yo Chuck!

;-)

don

"Aaron Allen" <nospam@not_here.dude> wrote in message
news:44c9593e$1@linux...
> That's probably the guys at ID. I know an XP convertor was ported at some
> point, name escapes on who though. You might also hit up Chuck Duffy on
> that question, or Matt Craig if anyone has been able to locate him.
>
> AA
>
>
> "Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>> The developer for reaper is looking for any documentation on PAF
>> files...does anyone have any info or the name of the guy who did the PAF
>> to Wav converter handy?
>>
>> thanks
>>
>> Don
>>
>>
>>
>
>
> I choose Polesoft Lockspam to fight spam, and you?
> http://www.polesoft.com/refer.html
>
Re: importing PAFs into Reaper [message #70612 is a reply to message #70602] Thu, 27 July 2006 19:51 Go to previous messageGo to next message
macle   
Messages: 47
Registered: July 2006
Member
For real? So you'd be able to open up Paris projects in
Reaper? That would be fantastic.

"Don Nafe" <dnafe@magma.ca> wrote:
>He's also looking for any PPJ documentation if there is any
>
>D
>
>"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>> The developer for reaper is looking for any documentation on PAF
>> files...does anyone have any info or the name of the guy who did the PAF

>> to Wav converter handy?
>>
>> thanks
>>
>> Don
>>
>>
>>
>
>
Re: importing PAFs into Reaper [message #70614 is a reply to message #70612] Thu, 27 July 2006 20:25 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
that would TOTALLY rock IMO. I still have/use/love paris, but everything
cometh to an end eventually. Options are good.
AA

"macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
>
> For real? So you'd be able to open up Paris projects in
> Reaper? That would be fantastic.
>
> "Don Nafe" <dnafe@magma.ca> wrote:
>>He's also looking for any PPJ documentation if there is any
>>
>>D
>>
>>"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>>> The developer for reaper is looking for any documentation on PAF
>>> files...does anyone have any info or the name of the guy who did the PAF
>
>>> to Wav converter handy?
>>>
>>> thanks
>>>
>>> Don
>>>
>>>
>>>
>>
>>
>


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
Re: importing PAFs into Reaper [message #70617 is a reply to message #70614] Fri, 28 July 2006 03:53 Go to previous messageGo to next message
Don Nafe is currently offline  Don Nafe   UNITED STATES
Messages: 1206
Registered: July 2005
Senior Member
That is the game plan...as to whether or not it happens well that's another
story but the developer(s) are looking into it

Don

"Aaron Allen" <nospam@not_here.dude> wrote in message news:44c9825d@linux...
> that would TOTALLY rock IMO. I still have/use/love paris, but everything
> cometh to an end eventually. Options are good.
> AA
>
> "macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
>>
>> For real? So you'd be able to open up Paris projects in
>> Reaper? That would be fantastic.
>>
>> "Don Nafe" <dnafe@magma.ca> wrote:
>>>He's also looking for any PPJ documentation if there is any
>>>
>>>D
>>>
>>>"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>>>> The developer for reaper is looking for any documentation on PAF
>>>> files...does anyone have any info or the name of the guy who did the
>>>> PAF
>>
>>>> to Wav converter handy?
>>>>
>>>> thanks
>>>>
>>>> Don
>>>>
>>>>
>>>>
>>>
>>>
>>
>
>
> I choose Polesoft Lockspam to fight spam, and you?
> http://www.polesoft.com/refer.html
>
Re: importing PAFs into Reaper [message #70619 is a reply to message #70601] Fri, 28 July 2006 04:39 Go to previous messageGo to next message
Don Nafe is currently offline  Don Nafe   UNITED STATES
Messages: 1206
Registered: July 2005
Senior Member
If you want to check out Reaper go to www.reaper.fm All versions to date
are free

The forum is located at http://www.cockos.com/forum/forumdisplay.php?f=19
they are looking for suggestions on wants, needs, desires...yes it's all
about you you you

Don


"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
> The developer for reaper is looking for any documentation on PAF
> files...does anyone have any info or the name of the guy who did the PAF
> to Wav converter handy?
>
> thanks
>
> Don
>
>
>
Re: importing PAFs into Reaper [message #70620 is a reply to message #70612] Fri, 28 July 2006 05:25 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
Probably not Paris *projects*.....just Paris audio files.

"macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
>
> For real? So you'd be able to open up Paris projects in
> Reaper? That would be fantastic.
>
> "Don Nafe" <dnafe@magma.ca> wrote:
> >He's also looking for any PPJ documentation if there is any
> >
> >D
> >
> >"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
> >> The developer for reaper is looking for any documentation on PAF
> >> files...does anyone have any info or the name of the guy who did the
PAF
>
> >> to Wav converter handy?
> >>
> >> thanks
> >>
> >> Don
> >>
> >>
> >>
> >
> >
>
Re: importing PAFs into Reaper [message #70622 is a reply to message #70620] Fri, 28 July 2006 05:43 Go to previous messageGo to next message
Don Nafe is currently offline  Don Nafe   UNITED STATES
Messages: 1206
Registered: July 2005
Senior Member
They're going to give it a try but I think it's a lost cause...PAF's on the
otherhand look promising...possibly time stamped too

Don


"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:44ca0268@linux...
> Probably not Paris *projects*.....just Paris audio files.
>
> "macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
>>
>> For real? So you'd be able to open up Paris projects in
>> Reaper? That would be fantastic.
>>
>> "Don Nafe" <dnafe@magma.ca> wrote:
>> >He's also looking for any PPJ documentation if there is any
>> >
>> >D
>> >
>> >"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>> >> The developer for reaper is looking for any documentation on PAF
>> >> files...does anyone have any info or the name of the guy who did the
> PAF
>>
>> >> to Wav converter handy?
>> >>
>> >> thanks
>> >>
>> >> Don
>> >>
>> >>
>> >>
>> >
>> >
>>
>
>
Re: importing PAFs into Reaper [message #70628 is a reply to message #70622] Fri, 28 July 2006 06:08 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
How can they be time stamped if Paris does not support broadcast .wav?

"Don Nafe" <dnafe@magma.ca> wrote in message news:44ca0526$1@linux...
> They're going to give it a try but I think it's a lost cause...PAF's on
the
> otherhand look promising...possibly time stamped too
>
> Don
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:44ca0268@linux...
> > Probably not Paris *projects*.....just Paris audio files.
> >
> > "macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
> >>
> >> For real? So you'd be able to open up Paris projects in
> >> Reaper? That would be fantastic.
> >>
> >> "Don Nafe" <dnafe@magma.ca> wrote:
> >> >He's also looking for any PPJ documentation if there is any
> >> >
> >> >D
> >> >
> >> >"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
> >> >> The developer for reaper is looking for any documentation on PAF
> >> >> files...does anyone have any info or the name of the guy who did the
> > PAF
> >>
> >> >> to Wav converter handy?
> >> >>
> >> >> thanks
> >> >>
> >> >> Don
> >> >>
> >> >>
> >> >>
> >> >
> >> >
> >>
> >
> >
>
>
Re: importing PAFs into Reaper [message #70636 is a reply to message #70628] Fri, 28 July 2006 08:24 Go to previous messageGo to next message
Don Nafe is currently offline  Don Nafe   UNITED STATES
Messages: 1206
Registered: July 2005
Senior Member
I was under the impression Paris had some sort of time stamp to allow for
positioning of tracks in the editor window. Am I wrong here...if so
nevermind

Don


"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:44ca0c7b@linux...
> How can they be time stamped if Paris does not support broadcast .wav?
>
> "Don Nafe" <dnafe@magma.ca> wrote in message news:44ca0526$1@linux...
>> They're going to give it a try but I think it's a lost cause...PAF's on
> the
>> otherhand look promising...possibly time stamped too
>>
>> Don
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> news:44ca0268@linux...
>> > Probably not Paris *projects*.....just Paris audio files.
>> >
>> > "macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
>> >>
>> >> For real? So you'd be able to open up Paris projects in
>> >> Reaper? That would be fantastic.
>> >>
>> >> "Don Nafe" <dnafe@magma.ca> wrote:
>> >> >He's also looking for any PPJ documentation if there is any
>> >> >
>> >> >D
>> >> >
>> >> >"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>> >> >> The developer for reaper is looking for any documentation on PAF
>> >> >> files...does anyone have any info or the name of the guy who did
>> >> >> the
>> > PAF
>> >>
>> >> >> to Wav converter handy?
>> >> >>
>> >> >> thanks
>> >> >>
>> >> >> Don
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >
>> >
>>
>>
>
>
Re: importing PAFs into Reaper [message #70637 is a reply to message #70636] Fri, 28 July 2006 08:27 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
Hmmmm.......perhaps within the context of a .ppj, but I sorta' doubt this
would apply to a .paf that was not incorporated into a .ppj. If Reaper
cannot import/open .ppj's, I think you're going to have *issues* with this.

Deej

"Don Nafe" <dnafe@magma.ca> wrote in message news:44ca2ae2$1@linux...
> I was under the impression Paris had some sort of time stamp to allow for
> positioning of tracks in the editor window. Am I wrong here...if so
> nevermind
>
> Don
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:44ca0c7b@linux...
> > How can they be time stamped if Paris does not support broadcast .wav?
> >
> > "Don Nafe" <dnafe@magma.ca> wrote in message news:44ca0526$1@linux...
> >> They're going to give it a try but I think it's a lost cause...PAF's on
> > the
> >> otherhand look promising...possibly time stamped too
> >>
> >> Don
> >>
> >>
> >> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >> news:44ca0268@linux...
> >> > Probably not Paris *projects*.....just Paris audio files.
> >> >
> >> > "macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
> >> >>
> >> >> For real? So you'd be able to open up Paris projects in
> >> >> Reaper? That would be fantastic.
> >> >>
> >> >> "Don Nafe" <dnafe@magma.ca> wrote:
> >> >> >He's also looking for any PPJ documentation if there is any
> >> >> >
> >> >> >D
> >> >> >
> >> >> >"Don Nafe" <dnafe@magma.ca> wrote in message
news:44c92fd0$1@linux...
> >> >> >> The developer for reaper is looking for any documentation on PAF
> >> >> >> files...does anyone have any info or the name of the guy who did
> >> >> >> the
> >> > PAF
> >> >>
> >> >> >> to Wav converter handy?
> >> >> >>
> >> >> >> thanks
> >> >> >>
> >> >> >> Don
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >
> >> >> >
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>
Re: importing PAFs into Reaper [message #70638 is a reply to message #70622] Fri, 28 July 2006 08:34 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
I remember EP used to rant a bit about how PAF is really just a 'pure' wav
format with a different header. I'd think this should not be hard to deal
with at all.. .PPJ on the other hand might be a pitfall of snakes.

AA

"Don Nafe" <dnafe@magma.ca> wrote in message news:44ca0526$1@linux...
> They're going to give it a try but I think it's a lost cause...PAF's on
> the otherhand look promising...possibly time stamped too
>
> Don
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:44ca0268@linux...
>> Probably not Paris *projects*.....just Paris audio files.
>>
>> "macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
>>>
>>> For real? So you'd be able to open up Paris projects in
>>> Reaper? That would be fantastic.
>>>
>>> "Don Nafe" <dnafe@magma.ca> wrote:
>>> >He's also looking for any PPJ documentation if there is any
>>> >
>>> >D
>>> >
>>> >"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>>> >> The developer for reaper is looking for any documentation on PAF
>>> >> files...does anyone have any info or the name of the guy who did the
>> PAF
>>>
>>> >> to Wav converter handy?
>>> >>
>>> >> thanks
>>> >>
>>> >> Don
>>> >>
>>> >>
>>> >>
>>> >
>>> >
>>>
>>
>>
>
>


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
Re: importing PAFs into Reaper [message #70640 is a reply to message #70628] Fri, 28 July 2006 08:37 Go to previous messageGo to next message
Aaron Allen is currently offline  Aaron Allen   UNITED STATES
Messages: 1988
Registered: May 2008
Senior Member
My guess, and only is a guess, would be that the time stamping is coming
from the PPJ itself. To support this theory, we can take a PAF file in one
project, and it knows where it should be because it orginated or was
imported to that project, right? So, open this PAF in another PPJ that does
not 'know' this file, and it will place it where you stuff it, or at the
beginning of the track if you use the time locked tool.
That's my theory, anyway.

AA


"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:44ca0c7b@linux...
> How can they be time stamped if Paris does not support broadcast .wav?
>
> "Don Nafe" <dnafe@magma.ca> wrote in message news:44ca0526$1@linux...
>> They're going to give it a try but I think it's a lost cause...PAF's on
> the
>> otherhand look promising...possibly time stamped too
>>
>> Don
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> news:44ca0268@linux...
>> > Probably not Paris *projects*.....just Paris audio files.
>> >
>> > "macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
>> >>
>> >> For real? So you'd be able to open up Paris projects in
>> >> Reaper? That would be fantastic.
>> >>
>> >> "Don Nafe" <dnafe@magma.ca> wrote:
>> >> >He's also looking for any PPJ documentation if there is any
>> >> >
>> >> >D
>> >> >
>> >> >"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>> >> >> The developer for reaper is looking for any documentation on PAF
>> >> >> files...does anyone have any info or the name of the guy who did
>> >> >> the
>> > PAF
>> >>
>> >> >> to Wav converter handy?
>> >> >>
>> >> >> thanks
>> >> >>
>> >> >> Don
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >
>> >
>>
>>
>
>


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
Re: importing PAFs into Reaper [message #70642 is a reply to message #70638] Fri, 28 July 2006 09:20 Go to previous messageGo to next message
Don Nafe is currently offline  Don Nafe   UNITED STATES
Messages: 1206
Registered: July 2005
Senior Member
Well they're looking at both PAF's and PPJ's...I guess time will tell

Don


"Aaron Allen" <nospam@not_here.dude> wrote in message news:44ca2d5f@linux...
>I remember EP used to rant a bit about how PAF is really just a 'pure' wav
>format with a different header. I'd think this should not be hard to deal
>with at all.. .PPJ on the other hand might be a pitfall of snakes.
>
> AA
>
> "Don Nafe" <dnafe@magma.ca> wrote in message news:44ca0526$1@linux...
>> They're going to give it a try but I think it's a lost cause...PAF's on
>> the otherhand look promising...possibly time stamped too
>>
>> Don
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> news:44ca0268@linux...
>>> Probably not Paris *projects*.....just Paris audio files.
>>>
>>> "macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
>>>>
>>>> For real? So you'd be able to open up Paris projects in
>>>> Reaper? That would be fantastic.
>>>>
>>>> "Don Nafe" <dnafe@magma.ca> wrote:
>>>> >He's also looking for any PPJ documentation if there is any
>>>> >
>>>> >D
>>>> >
>>>> >"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>>>> >> The developer for reaper is looking for any documentation on PAF
>>>> >> files...does anyone have any info or the name of the guy who did the
>>> PAF
>>>>
>>>> >> to Wav converter handy?
>>>> >>
>>>> >> thanks
>>>> >>
>>>> >> Don
>>>> >>
>>>> >>
>>>> >>
>>>> >
>>>> >
>>>>
>>>
>>>
>>
>>
>
>
> I choose Polesoft Lockspam to fight spam, and you?
> http://www.polesoft.com/refer.html
>
Re: importing PAFs into Reaper [message #70650 is a reply to message #70619] Fri, 28 July 2006 16:14 Go to previous messageGo to next message
Cujjo is currently offline  Cujjo   
Messages: 325
Registered: June 2007
Senior Member
It sure would be nice to use it with Paris hadware


"Don Nafe" <dnafe@magma.ca> wrote:
>If you want to check out Reaper go to www.reaper.fm All versions to date

>are free
>
>The forum is located at http://www.cockos.com/forum/forumdisplay.php?f=19

>they are looking for suggestions on wants, needs, desires...yes it's all

>about you you you
>
>Don
>
>
>"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>> The developer for reaper is looking for any documentation on PAF
>> files...does anyone have any info or the name of the guy who did the PAF

>> to Wav converter handy?
>>
>> thanks
>>
>> Don
>>
>>
>>
>
>
Re: importing PAFs into Reaper [message #70651 is a reply to message #70637] Fri, 28 July 2006 16:37 Go to previous messageGo to next message
Martin Harrington is currently offline  Martin Harrington   AUSTRALIA
Messages: 560
Registered: September 2005
Senior Member
Don't you all think that the Reapers GUI is a little "toytown", after all
the sophistication that we're all used to in DAWS these days?
--
Martin Harrington
www.lendanear-sound.com

"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:44ca2d12$1@linux...
> Hmmmm.......perhaps within the context of a .ppj, but I sorta' doubt this
> would apply to a .paf that was not incorporated into a .ppj. If Reaper
> cannot import/open .ppj's, I think you're going to have *issues* with
> this.
>
> Deej
>
> "Don Nafe" <dnafe@magma.ca> wrote in message news:44ca2ae2$1@linux...
>> I was under the impression Paris had some sort of time stamp to allow for
>> positioning of tracks in the editor window. Am I wrong here...if so
>> nevermind
>>
>> Don
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> news:44ca0c7b@linux...
>> > How can they be time stamped if Paris does not support broadcast .wav?
>> >
>> > "Don Nafe" <dnafe@magma.ca> wrote in message news:44ca0526$1@linux...
>> >> They're going to give it a try but I think it's a lost cause...PAF's
>> >> on
>> > the
>> >> otherhand look promising...possibly time stamped too
>> >>
>> >> Don
>> >>
>> >>
>> >> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> >> news:44ca0268@linux...
>> >> > Probably not Paris *projects*.....just Paris audio files.
>> >> >
>> >> > "macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
>> >> >>
>> >> >> For real? So you'd be able to open up Paris projects in
>> >> >> Reaper? That would be fantastic.
>> >> >>
>> >> >> "Don Nafe" <dnafe@magma.ca> wrote:
>> >> >> >He's also looking for any PPJ documentation if there is any
>> >> >> >
>> >> >> >D
>> >> >> >
>> >> >> >"Don Nafe" <dnafe@magma.ca> wrote in message
> news:44c92fd0$1@linux...
>> >> >> >> The developer for reaper is looking for any documentation on PAF
>> >> >> >> files...does anyone have any info or the name of the guy who did
>> >> >> >> the
>> >> > PAF
>> >> >>
>> >> >> >> to Wav converter handy?
>> >> >> >>
>> >> >> >> thanks
>> >> >> >>
>> >> >> >> Don
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >
>> >> >> >
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>
Re: importing PAFs into Reaper [message #70652 is a reply to message #70638] Fri, 28 July 2006 16:38 Go to previous messageGo to next message
Martin Harrington is currently offline  Martin Harrington   AUSTRALIA
Messages: 560
Registered: September 2005
Senior Member
Wavelab handled them alright, although I don't know whether V6 will accept
them.
--
Martin Harrington
www.lendanear-sound.com

"Aaron Allen" <nospam@not_here.dude> wrote in message news:44ca2d5f@linux...
>I remember EP used to rant a bit about how PAF is really just a 'pure' wav
>format with a different header. I'd think this should not be hard to deal
>with at all.. .PPJ on the other hand might be a pitfall of snakes.
>
> AA
>
> "Don Nafe" <dnafe@magma.ca> wrote in message news:44ca0526$1@linux...
>> They're going to give it a try but I think it's a lost cause...PAF's on
>> the otherhand look promising...possibly time stamped too
>>
>> Don
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> news:44ca0268@linux...
>>> Probably not Paris *projects*.....just Paris audio files.
>>>
>>> "macle" <Mates9999@cs.com> wrote in message news:44c97bc8$1@linux...
>>>>
>>>> For real? So you'd be able to open up Paris projects in
>>>> Reaper? That would be fantastic.
>>>>
>>>> "Don Nafe" <dnafe@magma.ca> wrote:
>>>> >He's also looking for any PPJ documentation if there is any
>>>> >
>>>> >D
>>>> >
>>>> >"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>>>> >> The developer for reaper is looking for any documentation on PAF
>>>> >> files...does anyone have any info or the name of the guy who did the
>>> PAF
>>>>
>>>> >> to Wav converter handy?
>>>> >>
>>>> >> thanks
>>>> >>
>>>> >> Don
>>>> >>
>>>> >>
>>>> >>
>>>> >
>>>> >
>>>>
>>>
>>>
>>
>>
>
>
> I choose Polesoft Lockspam to fight spam, and you?
> http://www.polesoft.com/refer.html
>
Re: importing PAFs into Reaper [message #70653 is a reply to message #70650] Fri, 28 July 2006 16:40 Go to previous messageGo to next message
Martin Harrington is currently offline  Martin Harrington   AUSTRALIA
Messages: 560
Registered: September 2005
Senior Member
As I said earlier Cujo, why would you want to use such a basic looking
interface instead of the Paris masterpiece?
--
Martin Harrington
www.lendanear-sound.com

"cujo" <chris@applemanstudio.com> wrote in message news:44ca9a4f$1@linux...
>
>
> It sure would be nice to use it with Paris hadware
>
>
> "Don Nafe" <dnafe@magma.ca> wrote:
>>If you want to check out Reaper go to www.reaper.fm All versions to date
>
>>are free
>>
>>The forum is located at http://www.cockos.com/forum/forumdisplay.php?f=19
>
>>they are looking for suggestions on wants, needs, desires...yes it's all
>
>>about you you you
>>
>>Don
>>
>>
>>"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>>> The developer for reaper is looking for any documentation on PAF
>>> files...does anyone have any info or the name of the guy who did the PAF
>
>>> to Wav converter handy?
>>>
>>> thanks
>>>
>>> Don
>>>
>>>
>>>
>>
>>
>
Re: importing PAFs into Reaper [message #70657 is a reply to message #70652] Fri, 28 July 2006 18:07 Go to previous messageGo to next message
Chris Ludwig is currently offline  Chris Ludwig   UNITED STATES
Messages: 868
Registered: May 2006
Senior Member
HI,
Yes Wavelab 6 handles it just fine
Chris


Martin Harrington wrote:
> Wavelab handled them alright, although I don't know whether V6 will accept
> them.

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762
Re: importing PAFs into Reaper [message #70660 is a reply to message #70657] Fri, 28 July 2006 20:48 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
I have a feeling that Mr. Wavelab, being French and all, may always have a
soft spot for an app called Paris.

;o)

"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:44cab376@linux...
> HI,
> Yes Wavelab 6 handles it just fine
> Chris
>
>
> Martin Harrington wrote:
> > Wavelab handled them alright, although I don't know whether V6 will
accept
> > them.
>
> --
> Chris Ludwig
> ADK
> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> www.adkproaudio.com <http://www.adkproaudio.com/>
> (859) 635-5762
Re: importing PAFs into Reaper [message #70661 is a reply to message #70653] Fri, 28 July 2006 20:54 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
Maybe 'cause it's free and it has plugin delay comensation?.......I
dunno.......it would be nice to be able to use an app with the Paris
hardware that had PDC. Since the 56 bit Paris summing bus has to be a result
of the onboard DSP, if another app could take advantage of this, it *might*
be able to achieve some of the Paris mix bus
mojo..........maybe..........maybe not.

I agree though that the Reaper GUI is a bit crude by Paris standards.

Deej


"Martin Harrington" <lendan@bigpond.net.au> wrote in message
news:44ca9f28$1@linux...
> As I said earlier Cujo, why would you want to use such a basic looking
> interface instead of the Paris masterpiece?
> --
> Martin Harrington
> www.lendanear-sound.com
>
> "cujo" <chris@applemanstudio.com> wrote in message
news:44ca9a4f$1@linux...
> >
> >
> > It sure would be nice to use it with Paris hadware
> >
> >
> > "Don Nafe" <dnafe@magma.ca> wrote:
> >>If you want to check out Reaper go to www.reaper.fm All versions to
date
> >
> >>are free
> >>
> >>The forum is located at
http://www.cockos.com/forum/forumdisplay.php?f=19
> >
> >>they are looking for suggestions on wants, needs, desires...yes it's all
> >
> >>about you you you
> >>
> >>Don
> >>
> >>
> >>"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
> >>> The developer for reaper is looking for any documentation on PAF
> >>> files...does anyone have any info or the name of the guy who did the
PAF
> >
> >>> to Wav converter handy?
> >>>
> >>> thanks
> >>>
> >>> Don
> >>>
> >>>
> >>>
> >>
> >>
> >
>
>
Re: importing PAFs into Reaper [message #70672 is a reply to message #70661] Sat, 29 July 2006 14:53 Go to previous messageGo to next message
Cujjo is currently offline  Cujjo   
Messages: 325
Registered: June 2007
Senior Member
Yeah the PDC is my main concern, that and VST on auxes. I do so want the
EMt 140 and SIR to show up there!



"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>Maybe 'cause it's free and it has plugin delay comensation?.......I
>dunno.......it would be nice to be able to use an app with the Paris
>hardware that had PDC. Since the 56 bit Paris summing bus has to be a result
>of the onboard DSP, if another app could take advantage of this, it *might*
>be able to achieve some of the Paris mix bus
>mojo..........maybe..........maybe not.
>
>I agree though that the Reaper GUI is a bit crude by Paris standards.
>
>Deej
>
>
>"Martin Harrington" <lendan@bigpond.net.au> wrote in message
>news:44ca9f28$1@linux...
>> As I said earlier Cujo, why would you want to use such a basic looking
>> interface instead of the Paris masterpiece?
>> --
>> Martin Harrington
>> www.lendanear-sound.com
>>
>> "cujo" <chris@applemanstudio.com> wrote in message
>news:44ca9a4f$1@linux...
>> >
>> >
>> > It sure would be nice to use it with Paris hadware
>> >
>> >
>> > "Don Nafe" <dnafe@magma.ca> wrote:
>> >>If you want to check out Reaper go to www.reaper.fm All versions to
>date
>> >
>> >>are free
>> >>
>> >>The forum is located at
>http://www.cockos.com/forum/forumdisplay.php?f=19
>> >
>> >>they are looking for suggestions on wants, needs, desires...yes it's
all
>> >
>> >>about you you you
>> >>
>> >>Don
>> >>
>> >>
>> >>"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>> >>> The developer for reaper is looking for any documentation on PAF
>> >>> files...does anyone have any info or the name of the guy who did the
>PAF
>> >
>> >>> to Wav converter handy?
>> >>>
>> >>> thanks
>> >>>
>> >>> Don
>> >>>
>> >>>
>> >>>
>> >>
>> >>
>> >
>>
>>
>
>
Re: importing PAFs into Reaper [message #70673 is a reply to message #70672] Sat, 29 July 2006 15:26 Go to previous messageGo to next message
Deej [1] is currently offline  Deej [1]   UNITED STATES
Messages: 2149
Registered: January 2006
Senior Member
I've got VST plugins availalbe on 8 x Paris auxes here but it involves some
mighty convoluted digital routing. It's nice to have it though. With the
exception of the PSP Lexicon PCM 42 plugin, I'm pretty much just using
external hardware and UAD-1 plugins in my mixes these days and having these
available to any Paris track (due to said convoluted bussing system) is
mighty nice.


"cujo" <chris@applemanstudio.com> wrote in message news:44cbd8c9$1@linux...
>
>
> Yeah the PDC is my main concern, that and VST on auxes. I do so want the
> EMt 140 and SIR to show up there!
>
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> >Maybe 'cause it's free and it has plugin delay comensation?.......I
> >dunno.......it would be nice to be able to use an app with the Paris
> >hardware that had PDC. Since the 56 bit Paris summing bus has to be a
result
> >of the onboard DSP, if another app could take advantage of this, it
*might*
> >be able to achieve some of the Paris mix bus
> >mojo..........maybe..........maybe not.
> >
> >I agree though that the Reaper GUI is a bit crude by Paris standards.
> >
> >Deej
> >
> >
> >"Martin Harrington" <lendan@bigpond.net.au> wrote in message
> >news:44ca9f28$1@linux...
> >> As I said earlier Cujo, why would you want to use such a basic looking
> >> interface instead of the Paris masterpiece?
> >> --
> >> Martin Harrington
> >> www.lendanear-sound.com
> >>
> >> "cujo" <chris@applemanstudio.com> wrote in message
> >news:44ca9a4f$1@linux...
> >> >
> >> >
> >> > It sure would be nice to use it with Paris hadware
> >> >
> >> >
> >> > "Don Nafe" <dnafe@magma.ca> wrote:
> >> >>If you want to check out Reaper go to www.reaper.fm All versions to
> >date
> >> >
> >> >>are free
> >> >>
> >> >>The forum is located at
> >http://www.cockos.com/forum/forumdisplay.php?f=19
> >> >
> >> >>they are looking for suggestions on wants, needs, desires...yes it's
> all
> >> >
> >> >>about you you you
> >> >>
> >> >>Don
> >> >>
> >> >>
> >> >>"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
> >> >>> The developer for reaper is looking for any documentation on PAF
> >> >>> files...does anyone have any info or the name of the guy who did
the
> >PAF
> >> >
> >> >>> to Wav converter handy?
> >> >>>
> >> >>> thanks
> >> >>>
> >> >>> Don
> >> >>>
> >> >>>
> >> >>>
> >> >>
> >> >>
> >> >
> >>
> >>
> >
> >
>
Re: importing PAFs into Reaper [message #70682 is a reply to message #70673] Sun, 30 July 2006 07:00 Go to previous message
cujo is currently offline  cujo
Messages: 285
Registered: July 2005
Senior Member
I sure admire your set up, but honestly I don't think I could afford it never
mind figure it out!



"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>I've got VST plugins availalbe on 8 x Paris auxes here but it involves some
>mighty convoluted digital routing. It's nice to have it though. With the
>exception of the PSP Lexicon PCM 42 plugin, I'm pretty much just using
>external hardware and UAD-1 plugins in my mixes these days and having these
>available to any Paris track (due to said convoluted bussing system) is
>mighty nice.
>
>
>"cujo" <chris@applemanstudio.com> wrote in message news:44cbd8c9$1@linux...
>>
>>
>> Yeah the PDC is my main concern, that and VST on auxes. I do so want the
>> EMt 140 and SIR to show up there!
>>
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>> >Maybe 'cause it's free and it has plugin delay comensation?.......I
>> >dunno.......it would be nice to be able to use an app with the Paris
>> >hardware that had PDC. Since the 56 bit Paris summing bus has to be a
>result
>> >of the onboard DSP, if another app could take advantage of this, it
>*might*
>> >be able to achieve some of the Paris mix bus
>> >mojo..........maybe..........maybe not.
>> >
>> >I agree though that the Reaper GUI is a bit crude by Paris standards.
>> >
>> >Deej
>> >
>> >
>> >"Martin Harrington" <lendan@bigpond.net.au> wrote in message
>> >news:44ca9f28$1@linux...
>> >> As I said earlier Cujo, why would you want to use such a basic looking
>> >> interface instead of the Paris masterpiece?
>> >> --
>> >> Martin Harrington
>> >> www.lendanear-sound.com
>> >>
>> >> "cujo" <chris@applemanstudio.com> wrote in message
>> >news:44ca9a4f$1@linux...
>> >> >
>> >> >
>> >> > It sure would be nice to use it with Paris hadware
>> >> >
>> >> >
>> >> > "Don Nafe" <dnafe@magma.ca> wrote:
>> >> >>If you want to check out Reaper go to www.reaper.fm All versions
to
>> >date
>> >> >
>> >> >>are free
>> >> >>
>> >> >>The forum is located at
>> >http://www.cockos.com/forum/forumdisplay.php?f=19
>> >> >
>> >> >>they are looking for suggestions on wants, needs, desires...yes it's
>> all
>> >> >
>> >> >>about you you you
>> >> >>
>> >> >>Don
>> >> >>
>> >> >>
>> >> >>"Don Nafe" <dnafe@magma.ca> wrote in message news:44c92fd0$1@linux...
>> >> >>> The developer for reaper is looking for any documentation on PAF
>> >> >>> files...does anyone have any info or the name of the guy who did
>the
>> >PAF
>> >> >
>> >> >>> to Wav converter handy?
>> >> >>>
>> >> >>> thanks
>> >> >>>
>> >> >>> Don
>> >> >>>
>> >> >>>
>> >> >>>
>> >> >>
>> >> >>
>> >> >
>> >>
>> >>
>> >
>> >
>>
>
>
Previous Topic: What's royalty free and no longer under copy protection?
Next Topic: new motherboard recommendations?
Goto Forum:
  


Current Time: Thu Dec 05 03:53:53 PST 2024

Total time taken to generate the page: 0.01789 seconds