Home » The PARIS Forums » PARIS: Main » Going between Paris 3.0 & 2.2?
| Going between Paris 3.0 & 2.2? [message #62711] |
Mon, 09 January 2006 12:15  |
|
|
It's been a long time, and I remember there was a way, but how do I go back
and fourth betweeen Paris v3.0 and 2.2?
I have a project in my 3.0, in CT. but I need my friend up un Mass. to add
something on it for me.
I was going to bring my project up to his house and let him do his thing,
then was hoping to bring it back to my house to do more with it, but he has
v 2.2 and I have v3.0. I thought I remembered a way to go between them.
If not...........Can I just bring the 2 track mix of my project to his house,
have him put in in Paris 2.2, and add his music, then bring that back to
my project, and just put his .paf files back into my original project? Would
that line up properly?
Any suggestions?
Thanks ............Lou
Louis Guarino Jr.
www.enchantedvibrations.net
|
|
|
|
| Re: Going between Paris 3.0 & 2.2? [message #62723 is a reply to message #62711] |
Mon, 09 January 2006 14:07  |
Tyrone Corbett
Messages: 253
Registered: August 2006
|
Senior Member |
|
|
Lou, if memory serves me correctly, you can import projects from 2.2 to 3.0,
but not in reverse. Obviously, your 2 track method will work and things should
line up if you grid-locked your originating tracks in 3.0.
Best of luck!
Tyrone
"Louis Guarino Jr." <Kateeba@snet.net> wrote:
>
>It's been a long time, and I remember there was a way, but how do I go back
>and fourth betweeen Paris v3.0 and 2.2?
>
>I have a project in my 3.0, in CT. but I need my friend up un Mass. to add
>something on it for me.
>
>I was going to bring my project up to his house and let him do his thing,
>then was hoping to bring it back to my house to do more with it, but he
has
>v 2.2 and I have v3.0. I thought I remembered a way to go between them.
>
>
>If not...........Can I just bring the 2 track mix of my project to his house,
>have him put in in Paris 2.2, and add his music, then bring that back to
>my project, and just put his .paf files back into my original project?
Would
>that line up properly?
>
>Any suggestions?
>
>Thanks ............Lou
|
|
|
|
| Re: Going between Paris 3.0 & 2.2? [message #62727 is a reply to message #62723] |
Mon, 09 January 2006 14:42 |
Kim
Messages: 1246
Registered: October 2005
|
Senior Member |
|
|
You can certainly go from 2.2 to 3 by simply loading the project on 3. There
is a method of getting from version 3 back to 2.2 also. I'm 80% sure that
it simply involved removing every single Aux bus effect (including sends
I think) from the 3 project and then you could simply load it in 2.2. You
just need to set everything aux send related back to what it defaults to
and the project will load back in to 2.2.
....I think...
....I know it is possible. I have done it.
Cheers,
Kim.
"Tyrone Corbett" <tyronecorbett@comcast.net> wrote:
>
>Lou, if memory serves me correctly, you can import projects from 2.2 to
3.0,
>but not in reverse. Obviously, your 2 track method will work and things
should
>line up if you grid-locked your originating tracks in 3.0.
>
>Best of luck!
>
>Tyrone
>
>"Louis Guarino Jr." <Kateeba@snet.net> wrote:
>>
>>It's been a long time, and I remember there was a way, but how do I go
back
>>and fourth betweeen Paris v3.0 and 2.2?
>>
>>I have a project in my 3.0, in CT. but I need my friend up un Mass. to
add
>>something on it for me.
>>
>>I was going to bring my project up to his house and let him do his thing,
>>then was hoping to bring it back to my house to do more with it, but he
>has
>>v 2.2 and I have v3.0. I thought I remembered a way to go between them.
>>
>>
>>If not...........Can I just bring the 2 track mix of my project to his
house,
>>have him put in in Paris 2.2, and add his music, then bring that back to
>>my project, and just put his .paf files back into my original project?
>Would
>>that line up properly?
>>
>>Any suggestions?
>>
>>Thanks ............Lou
>
|
|
|
|
| Re: Going between Paris 3.0 & 2.2? [message #62732 is a reply to message #62727] |
Mon, 09 January 2006 14:48 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
To have 2 different version of Paris installed.....
What you should do is (assuming you have v2.x installed):
1) Go to the where the PARIS application is (usually C:\Program
Files\Ensoniq\PARIS", Copy the whole PARIS folder to another location
(copy, not move)
2) Remove 2.x from Add/Remove panel (this will remove the original copy),
3) Reboot, install 3.0, Reboot.
Now you can use the installed 3.0, and also still run the 2.x copy
wherever you have it. You can even move it back to the original location.
Kim wrote:
> You can certainly go from 2.2 to 3 by simply loading the project on 3. There
> is a method of getting from version 3 back to 2.2 also. I'm 80% sure that
> it simply involved removing every single Aux bus effect (including sends
> I think) from the 3 project and then you could simply load it in 2.2. You
> just need to set everything aux send related back to what it defaults to
> and the project will load back in to 2.2.
>
> ...I think...
>
> ...I know it is possible. I have done it.
>
> Cheers,
> Kim.
>
> "Tyrone Corbett" <tyronecorbett@comcast.net> wrote:
>
>>Lou, if memory serves me correctly, you can import projects from 2.2 to
>
> 3.0,
>
>>but not in reverse. Obviously, your 2 track method will work and things
>
> should
>
>>line up if you grid-locked your originating tracks in 3.0.
>>
>>Best of luck!
>>
>>Tyrone
>>
>>"Louis Guarino Jr." <Kateeba@snet.net> wrote:
>>
>>>It's been a long time, and I remember there was a way, but how do I go
>
> back
>
>>>and fourth betweeen Paris v3.0 and 2.2?
>>>
>>>I have a project in my 3.0, in CT. but I need my friend up un Mass. to
>
> add
>
>>>something on it for me.
>>>
>>>I was going to bring my project up to his house and let him do his thing,
>>>then was hoping to bring it back to my house to do more with it, but he
>>
>>has
>>
>>>v 2.2 and I have v3.0. I thought I remembered a way to go between them.
>>>
>>>
>>>If not...........Can I just bring the 2 track mix of my project to his
>
> house,
>
>>>have him put in in Paris 2.2, and add his music, then bring that back to
>>>my project, and just put his .paf files back into my original project?
>
>
>>Would
>>
>>>that line up properly?
>>>
>>>Any suggestions?
>>>
>>>Thanks ............Lou
>>
>
|
|
|
|
| Re: Going between Paris 3.0 & 2.2? [message #62752 is a reply to message #62727] |
Mon, 09 January 2006 17:52 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
You got it Kim.. kill ALL auxes and it should load up in 2.xx just fine from
a version 3 save. Worst case, send the dude rendered stem tracks and have
him render a final track(s) for you starting at the same time on all of them
to import to your project.
AA
"Kim" <hiddensounds@hotmail.com> wrote in message news:43c2d8c3$1@linux...
>
>
> You can certainly go from 2.2 to 3 by simply loading the project on 3.
> There
> is a method of getting from version 3 back to 2.2 also. I'm 80% sure that
> it simply involved removing every single Aux bus effect (including sends
> I think) from the 3 project and then you could simply load it in 2.2. You
> just need to set everything aux send related back to what it defaults to
> and the project will load back in to 2.2.
>
> ...I think...
>
> ...I know it is possible. I have done it.
>
> Cheers,
> Kim.
>
> "Tyrone Corbett" <tyronecorbett@comcast.net> wrote:
>>
>>Lou, if memory serves me correctly, you can import projects from 2.2 to
> 3.0,
>>but not in reverse. Obviously, your 2 track method will work and things
> should
>>line up if you grid-locked your originating tracks in 3.0.
>>
>>Best of luck!
>>
>>Tyrone
>>
>>"Louis Guarino Jr." <Kateeba@snet.net> wrote:
>>>
>>>It's been a long time, and I remember there was a way, but how do I go
> back
>>>and fourth betweeen Paris v3.0 and 2.2?
>>>
>>>I have a project in my 3.0, in CT. but I need my friend up un Mass. to
> add
>>>something on it for me.
>>>
>>>I was going to bring my project up to his house and let him do his thing,
>>>then was hoping to bring it back to my house to do more with it, but he
>>has
>>>v 2.2 and I have v3.0. I thought I remembered a way to go between
>>>them.
>>>
>>>
>>>If not...........Can I just bring the 2 track mix of my project to his
> house,
>>>have him put in in Paris 2.2, and add his music, then bring that back to
>>>my project, and just put his .paf files back into my original project?
>
>>Would
>>>that line up properly?
>>>
>>>Any suggestions?
>>>
>>>Thanks ............Lou
>>
>
|
|
|
|
Goto Forum:
Current Time: Sun Jun 23 01:28:42 PDT 2024
Total time taken to generate the page: 0.01846 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
