The PARIS Forums: PARIS: Main » Using old outboard digital processors in a new HD world

Home » The PARIS Forums » PARIS: Main » Using old outboard digital processors in a new HD world

Show: Today's Messages :: Polls :: Message Navigator

Using old outboard digital processors in a new HD world [message #90073]

Fri, 21 September 2007 07:13

Messages: 1124
Registered: July 2005

Senior Member

I'm currently interfacing my outboard gear as follows:

sending an 88.2 double wire ADAT signal from a pair of RME HDSP 9652 ADAT
outs to the Main and Aux ADAT inputs of an RME ADI 192-DD, sample
rate/format converted in this box to 4 x stereo pairs of AES/EBU at 44.1KHz
and sent to the AES/EBU inputs of a Lexicon PCM 91, a Sony V77, a Roland
R-880 and a Quantec Yardstick. The AES/EBU stereo 44.1KHz output signals
from the 4 x outboard processors was returned via their 4 x stereo AES
outputs to the 4 x AES inputs of an RME ADI 8-DD and there it was upsampled
and format converted to 88.2KHz DS ADAT and returned from the ADAT Main and
Aux outs to the DAW.

Works like a dream. This may seem like an excessive effort to make, but to
me it's not. I like these old outboard processors and when working at higher
sample rates, using my outboard is especially nice because high sample rates
suck twice (or more) of the computer resources.

...........and so I don't have to buy a Mac.

;o)

Report message to a moderator

Re: Using old outboard digital processors in a new HD world [message #90100 is a reply to message #90073]

Fri, 21 September 2007 12:00

rick

Messages: 1976
Registered: February 2006

Senior Member

i came up with a great mocha marinade for bbq or grilled pork, beef
cooked over cherry and pecan wood fire...and not a computer in
sight...yup a good day indeed.

On Fri, 21 Sep 2007 08:13:55 -0600, "DJ" <animix _ at _ animas _ dot _
net> wrote:

>I'm currently interfacing my outboard gear as follows:
>
>sending an 88.2 double wire ADAT signal from a pair of RME HDSP 9652 ADAT
>outs to the Main and Aux ADAT inputs of an RME ADI 192-DD, sample
>rate/format converted in this box to 4 x stereo pairs of AES/EBU at 44.1KHz
>and sent to the AES/EBU inputs of a Lexicon PCM 91, a Sony V77, a Roland
>R-880 and a Quantec Yardstick. The AES/EBU stereo 44.1KHz output signals
>from the 4 x outboard processors was returned via their 4 x stereo AES
>outputs to the 4 x AES inputs of an RME ADI 8-DD and there it was upsampled
>and format converted to 88.2KHz DS ADAT and returned from the ADAT Main and
>Aux outs to the DAW.
>
>Works like a dream. This may seem like an excessive effort to make, but to
>me it's not. I like these old outboard processors and when working at higher
>sample rates, using my outboard is especially nice because high sample rates
>suck twice (or more) of the computer resources.
>
>..........and so I don't have to buy a Mac.
>
>;o)
>
>
>

Report message to a moderator

Re: Using old outboard digital processors in a new HD world [message #90105 is a reply to message #90100]

Fri, 21 September 2007 12:28

John [1]
Messages: 2229
Registered: September 2005

Senior Member

you suck. hehe

rick <parnell68@hotmail.com> wrote:
>i came up with a great mocha marinade for bbq or grilled pork, beef
>cooked over cherry and pecan wood fire...and not a computer in
>sight...yup a good day indeed.
>
>
>
>On Fri, 21 Sep 2007 08:13:55 -0600, "DJ" <animix _ at _ animas _ dot _
>net> wrote:
>
>>I'm currently interfacing my outboard gear as follows:
>>
>>sending an 88.2 double wire ADAT signal from a pair of RME HDSP 9652 ADAT

>>outs to the Main and Aux ADAT inputs of an RME ADI 192-DD, sample
>>rate/format converted in this box to 4 x stereo pairs of AES/EBU at 44.1KHz

>>and sent to the AES/EBU inputs of a Lexicon PCM 91, a Sony V77, a Roland

>>R-880 and a Quantec Yardstick. The AES/EBU stereo 44.1KHz output signals

>>from the 4 x outboard processors was returned via their 4 x stereo AES

>>outputs to the 4 x AES inputs of an RME ADI 8-DD and there it was upsampled

>>and format converted to 88.2KHz DS ADAT and returned from the ADAT Main
and
>>Aux outs to the DAW.
>>
>>Works like a dream. This may seem like an excessive effort to make, but
to
>>me it's not. I like these old outboard processors and when working at higher

>>sample rates, using my outboard is especially nice because high sample
rates
>>suck twice (or more) of the computer resources.
>>
>>..........and so I don't have to buy a Mac.
>>
>>;o)
>>
>>
>>
>

Report message to a moderator

Re: Using old outboard digital processors in a new HD world [message #90129 is a reply to message #90100]

Fri, 21 September 2007 17:53

Messages: 1124
Registered: July 2005

Senior Member

"rick" <parnell68@hotmail.com> wrote in message
news:m258f39b3eg98qe2qh8lil8i5m57a77j4f@4ax.com...
>i came up with a great mocha marinade for bbq or grilled pork, beef
> cooked over cherry and pecan wood fire...and not a computer in
> sight...yup a good day indeed.
>

Dude!!!...that's soooooo analog!

;o)

Report message to a moderator

Re: Using old outboard digital processors in a new HD world [message #90155 is a reply to message #90129]

Sat, 22 September 2007 02:06

rick

Messages: 1976
Registered: February 2006

Senior Member

it's more of a rub (peanut butter consistency) but damn it's good.
i'm hoping to bring it to market next year.

On Fri, 21 Sep 2007 18:53:33 -0600, "DJ" <animix _ at _ animas _ dot _
net> wrote:

>
>"rick" <parnell68@hotmail.com> wrote in message
>news:m258f39b3eg98qe2qh8lil8i5m57a77j4f@4ax.com...
>>i came up with a great mocha marinade for bbq or grilled pork, beef
>> cooked over cherry and pecan wood fire...and not a computer in
>> sight...yup a good day indeed.
>>
>
>Dude!!!...that's soooooo analog!
>
>;o)
>

Report message to a moderator

Re: Using old outboard digital processors in a new HD world [message #90179 is a reply to message #90073]

Sat, 22 September 2007 11:46

Bill L

Messages: 766
Registered: August 2006

Senior Member

DJ, Those are nice units. You would probably dig a Klarke Technic DN780.
That is a super nice vintage reverb. And no MIDI anywhere on it. The
plates smoke on drums.

DJ wrote:
> I'm currently interfacing my outboard gear as follows:
>
> sending an 88.2 double wire ADAT signal from a pair of RME HDSP 9652 ADAT
> outs to the Main and Aux ADAT inputs of an RME ADI 192-DD, sample
> rate/format converted in this box to 4 x stereo pairs of AES/EBU at 44.1KHz
> and sent to the AES/EBU inputs of a Lexicon PCM 91, a Sony V77, a Roland
> R-880 and a Quantec Yardstick. The AES/EBU stereo 44.1KHz output signals
> from the 4 x outboard processors was returned via their 4 x stereo AES
> outputs to the 4 x AES inputs of an RME ADI 8-DD and there it was upsampled
> and format converted to 88.2KHz DS ADAT and returned from the ADAT Main and
> Aux outs to the DAW.
>
> Works like a dream. This may seem like an excessive effort to make, but to
> me it's not. I like these old outboard processors and when working at higher
> sample rates, using my outboard is especially nice because high sample rates
> suck twice (or more) of the computer resources.
>
> ..........and so I don't have to buy a Mac.
>
> ;o)
>
>
>
>

Report message to a moderator

Re: Using old outboard digital processors in a new HD world [message #90183 is a reply to message #90179]

Sat, 22 September 2007 12:13

Erling

Messages: 156
Registered: October 2008

Senior Member

I owned one that burned up in '87. Missed it since then.

Erling

On Sat, 22 Sep 2007 14:46:14 -0400, Bill L <bill@billlorentzen.com>
wrote:

>DJ, Those are nice units. You would probably dig a Klarke Technic DN780.
>That is a super nice vintage reverb. And no MIDI anywhere on it. The
>plates smoke on drums.

Report message to a moderator

Previous Topic:	Anyone using the Sytek MPX-4A Pre?
Next Topic:	To laugh, or not to laugh, that is the question?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Apr 22 01:57:19 PDT 2025

Total time taken to generate the page: 0.01258 seconds