Home » The PARIS Forums » PARIS: Main » PING! - DJ
|
|
|
|
|
|
|
|
| Re: PING! - DJ [message #85167 is a reply to message #85129] |
Thu, 24 May 2007 15:46   |
Sandy Tipping
Messages: 54
Registered: June 2007
|
Member |
|
|
My Core32 / LDI 12T sat in a box, out of use, for about four or five years.
I resurrected the whole system a week ago - including the old Win98 PII-450
system.
What I used to do was this:
Paris MEC A ADAT Out 1&2 to LDI 12T ADAT In 1&2 ---> PC90 Machine 1
Paris MEC B SPDIF Out L&R to LDI 12T SPDIF In L&R ----> PC90 Machine 2.
Everything happy, two reverbs, blah blah blah.
Now something is messed up, and I haven't changed anything other than
putting the system away for a few years. The card and the LDI interface
were stored outside of the computer, but in antistatic bags etc.
Here's what's happening:
1- Both PC90 are flaky re: reverb levels. The return to Paris, whether by
ADAT, SPDIF or analog, seems to vary from perfectly acceptable to really low
(cranking the Paris AuxRetn to +20 seems to bring it to where it needs to
be).
2- The PC90 sometimes stops passing signal (again, whether analog, ADAT or
SPDIF) and instead sends some 0DbFS of something I can't hear (my guess is
it's below 20Hz). Paris sees it and freaks.
3- The system diagnostics built into the Core32 say everything is fine, but
I still get a Core32 Failed and PC90 failed message at the end of the diag.
I'd love to solve the problem by borrowing gear. Anyone feel up to it?
Sandy
"Dimitrios" <musurgio@otenet.gr> wrote in message news:465539d0$1@linux...
>
> Hi Dedric,
> Are you selling or trading for your PC90 core32 ?
> I have one left input Paris card I also have the AKG microphone I posted
> before.
> Regards,
> Dimitrios
>
> Dedric Terry <dterry@keyofd.net> wrote:
>>I still have mine - don't use it much though.
>>
>>Dedric
>>
>>On 5/23/07 9:47 PM, in article 46550c66@linux, "Sandy Tipping"
>><tippsand@earthling.net> wrote:
>>
>>> DJ (and anyone else who is reading this),
>>>
>>> Do you still have / use the Lexicon Core32 / PC90 combination?
>>>
>>> I've got some issues with mine and want to cry on a shoulder (and ask
> a few
>>> questions).
>>>
>>> Sandy
>>>
>>>
>>
>
|
|
|
|
| Re: PING! - DJ [message #85169 is a reply to message #85167] |
Thu, 24 May 2007 15:54 |
Deej [4]
Messages: 1292
Registered: January 2007
|
Senior Member |
|
|
Have you tried clocking the LDI 12T from an external source?
"Sandy Tipping" <tippsand@earthling.net> wrote in message
news:46561755@linux...
> My Core32 / LDI 12T sat in a box, out of use, for about four or five
> years.
> I resurrected the whole system a week ago - including the old Win98
> PII-450 system.
> What I used to do was this:
> Paris MEC A ADAT Out 1&2 to LDI 12T ADAT In 1&2 ---> PC90 Machine 1
> Paris MEC B SPDIF Out L&R to LDI 12T SPDIF In L&R ----> PC90 Machine 2.
> Everything happy, two reverbs, blah blah blah.
> Now something is messed up, and I haven't changed anything other than
> putting the system away for a few years. The card and the LDI interface
> were stored outside of the computer, but in antistatic bags etc.
> Here's what's happening:
>
> 1- Both PC90 are flaky re: reverb levels. The return to Paris, whether by
> ADAT, SPDIF or analog, seems to vary from perfectly acceptable to really
> low (cranking the Paris AuxRetn to +20 seems to bring it to where it needs
> to be).
> 2- The PC90 sometimes stops passing signal (again, whether analog, ADAT or
> SPDIF) and instead sends some 0DbFS of something I can't hear (my guess is
> it's below 20Hz). Paris sees it and freaks.
> 3- The system diagnostics built into the Core32 say everything is fine,
> but I still get a Core32 Failed and PC90 failed message at the end of the
> diag.
>
> I'd love to solve the problem by borrowing gear. Anyone feel up to it?
>
> Sandy
>
>
> "Dimitrios" <musurgio@otenet.gr> wrote in message news:465539d0$1@linux...
>>
>> Hi Dedric,
>> Are you selling or trading for your PC90 core32 ?
>> I have one left input Paris card I also have the AKG microphone I posted
>> before.
>> Regards,
>> Dimitrios
>>
>> Dedric Terry <dterry@keyofd.net> wrote:
>>>I still have mine - don't use it much though.
>>>
>>>Dedric
>>>
>>>On 5/23/07 9:47 PM, in article 46550c66@linux, "Sandy Tipping"
>>><tippsand@earthling.net> wrote:
>>>
>>>> DJ (and anyone else who is reading this),
>>>>
>>>> Do you still have / use the Lexicon Core32 / PC90 combination?
>>>>
>>>> I've got some issues with mine and want to cry on a shoulder (and ask
>> a few
>>>> questions).
>>>>
>>>> Sandy
>>>>
>>>>
>>>
>>
>
>
|
|
|
|
| Re: PING! - DJ [message #85231 is a reply to message #85169] |
Fri, 25 May 2007 07:22 |
Sandy Tipping
Messages: 54
Registered: June 2007
|
Member |
|
|
Yes, in so far as I'm able. I've clocked it by all available clock inputs
on the LDI, but my external word clock is Paris (arguably, not the most
stable WC source).
Besides, it doesn't sound like clock (no pops / clicks etc). It sounds like
garbage.
Sandy
"DJ" <www.aarrrrggghhh!!!.com> wrote in message news:46561921@linux...
> Have you tried clocking the LDI 12T from an external source?
>
> "Sandy Tipping" <tippsand@earthling.net> wrote in message
> news:46561755@linux...
>> My Core32 / LDI 12T sat in a box, out of use, for about four or five
>> years.
>> I resurrected the whole system a week ago - including the old Win98
>> PII-450 system.
>> What I used to do was this:
>> Paris MEC A ADAT Out 1&2 to LDI 12T ADAT In 1&2 ---> PC90 Machine 1
>> Paris MEC B SPDIF Out L&R to LDI 12T SPDIF In L&R ----> PC90 Machine 2.
>> Everything happy, two reverbs, blah blah blah.
>> Now something is messed up, and I haven't changed anything other than
>> putting the system away for a few years. The card and the LDI interface
>> were stored outside of the computer, but in antistatic bags etc.
>> Here's what's happening:
>>
>> 1- Both PC90 are flaky re: reverb levels. The return to Paris, whether
>> by ADAT, SPDIF or analog, seems to vary from perfectly acceptable to
>> really low (cranking the Paris AuxRetn to +20 seems to bring it to where
>> it needs to be).
>> 2- The PC90 sometimes stops passing signal (again, whether analog, ADAT
>> or SPDIF) and instead sends some 0DbFS of something I can't hear (my
>> guess is it's below 20Hz). Paris sees it and freaks.
>> 3- The system diagnostics built into the Core32 say everything is fine,
>> but I still get a Core32 Failed and PC90 failed message at the end of the
>> diag.
>>
>> I'd love to solve the problem by borrowing gear. Anyone feel up to it?
>>
>> Sandy
>>
>>
>> "Dimitrios" <musurgio@otenet.gr> wrote in message
>> news:465539d0$1@linux...
>>>
>>> Hi Dedric,
>>> Are you selling or trading for your PC90 core32 ?
>>> I have one left input Paris card I also have the AKG microphone I posted
>>> before.
>>> Regards,
>>> Dimitrios
>>>
>>> Dedric Terry <dterry@keyofd.net> wrote:
>>>>I still have mine - don't use it much though.
>>>>
>>>>Dedric
>>>>
>>>>On 5/23/07 9:47 PM, in article 46550c66@linux, "Sandy Tipping"
>>>><tippsand@earthling.net> wrote:
>>>>
>>>>> DJ (and anyone else who is reading this),
>>>>>
>>>>> Do you still have / use the Lexicon Core32 / PC90 combination?
>>>>>
>>>>> I've got some issues with mine and want to cry on a shoulder (and ask
>>> a few
>>>>> questions).
>>>>>
>>>>> Sandy
>>>>>
>>>>>
>>>>
>>>
>>
>>
>
>
|
|
|
|
Goto Forum:
Current Time: Mon Dec 16 19:58:21 PST 2024
Total time taken to generate the page: 0.01455 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
