The PARIS Forums: PARIS: Main » Native PC optimization

Home » The PARIS Forums » PARIS: Main » Native PC optimization

Show: Today's Messages :: Polls :: Message Navigator

Native PC optimization [message #80266]

Sun, 18 February 2007 11:48

brandon[2]
Messages: 380
Registered: June 2006

Senior Member

Does nayone have links to good resources for optimizing XP for audio recording?
Or
Any suggestions.
I have two 7200 rpm drives and two 10k rpm sata drives.
How should I configure XP (install)...swap fil?... etc...

Thx,
B

Report message to a moderator

Re: Native PC optimization [message #80269 is a reply to message #80266]

Sun, 18 February 2007 11:18

audioguy_editout_

Messages: 249
Registered: December 2005

Senior Member

Let windows manage its own swap and place the OS on the 7200
drive. Place one of the 10K drives in a removeable SATA
drive bay on its OWN controller (with nothing else attached)
and use that for recording to. Use the second 10K drive for
recording to when you run out of room on the first drive, or
for back-up if you wish (you can install this one
internally). The bands you record should ideally purchase
their own drive, you then install the drive into a caddy for
the session, and remove when finished. The caddies also
make it easier to manage multiple sessions, as each session
is on its own drive.

David.

brandon wrote:

> Does nayone have links to good resources for optimizing XP for audio recording?
> Or
> Any suggestions.
> I have two 7200 rpm drives and two 10k rpm sata drives.
> How should I configure XP (install)...swap fil?... etc...
>
> Thx,
> B

Report message to a moderator

Re: Native PC optimization [message #80270 is a reply to message #80269]

Sun, 18 February 2007 12:30

brandon[2]
Messages: 380
Registered: June 2006

Senior Member

Dave what about sample ibraries etc..
Like convlution revbers and such?
Should those be ran off of the second sata drive?
I read somewhere to have your sample library on a seperate drive than the
audio recording drive.

b

"Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote:
>Let windows manage its own swap and place the OS on the 7200
>drive. Place one of the 10K drives in a removeable SATA
>drive bay on its OWN controller (with nothing else attached)
>and use that for recording to. Use the second 10K drive for
>recording to when you run out of room on the first drive, or
>for back-up if you wish (you can install this one
>internally). The bands you record should ideally purchase
>their own drive, you then install the drive into a caddy for
>the session, and remove when finished. The caddies also
>make it easier to manage multiple sessions, as each session
>is on its own drive.
>
>David.
>
>brandon wrote:
>
>> Does nayone have links to good resources for optimizing XP for audio recording?
>> Or
>> Any suggestions.
>> I have two 7200 rpm drives and two 10k rpm sata drives.
>> How should I configure XP (install)...swap fil?... etc...
>>
>> Thx,
>> B

Report message to a moderator

Re: Native PC optimization [message #80271 is a reply to message #80270]

Sun, 18 February 2007 11:33

audioguy_editout_

Messages: 249
Registered: December 2005

Senior Member

Yes, you could place all your samples etc on the second 10K
drive that is mounted internally. You could then mount the
unused 7200 drive into a USB2 enclosure for backup purposes.
This will also take some load off the internal PSU if it
doesn't have to spin 4 drives at once.

David.

Brandon wrote:

> Dave what about sample ibraries etc..
> Like convlution revbers and such?
> Should those be ran off of the second sata drive?
> I read somewhere to have your sample library on a seperate drive than the
> audio recording drive.
>
> b
>
>
>
>
>
> "Dave(EK Sound)" <audioguy_editout_@shaw.ca> wrote:
>
>>Let windows manage its own swap and place the OS on the 7200
>>drive. Place one of the 10K drives in a removeable SATA
>>drive bay on its OWN controller (with nothing else attached)
>>and use that for recording to. Use the second 10K drive for
>>recording to when you run out of room on the first drive, or
>>for back-up if you wish (you can install this one
>>internally). The bands you record should ideally purchase
>>their own drive, you then install the drive into a caddy for
>>the session, and remove when finished. The caddies also
>>make it easier to manage multiple sessions, as each session
>>is on its own drive.
>>
>>David.
>>
>>brandon wrote:
>>
>>
>>>Does nayone have links to good resources for optimizing XP for audio recording?
>>>Or
>>>Any suggestions.
>>>I have two 7200 rpm drives and two 10k rpm sata drives.
>>>How should I configure XP (install)...swap fil?... etc...
>>>
>>>Thx,
>>>B
>
>

Report message to a moderator

Re: Native PC optimization [message #80295 is a reply to message #80266]

Sun, 18 February 2007 18:37

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

HI Brandon,
The best site is/was www.musicxp.net but it seems to be down not sure
if it is for good.

The other great site although more general but very very informative.

http://www.tweakhound.com/

Chris

brandon wrote:

>Does nayone have links to good resources for optimizing XP for audio recording?
>Or
>Any suggestions.
>I have two 7200 rpm drives and two 10k rpm sata drives.
>How should I configure XP (install)...swap fil?... etc...
>
>Thx,
>B
>
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762

Report message to a moderator

Re: Native PC optimization [message #80299 is a reply to message #80295]

Sun, 18 February 2007 19:13

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

it's probably been upgraded by something like musicvista.net, LOL
AA

"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:45d90d9e$1@linux...
> HI Brandon,
> The best site is/was www.musicxp.net but it seems to be down not sure if
> it is for good.
>
> The other great site although more general but very very informative.
>
> http://www.tweakhound.com/
>
>
>
>
> Chris
>
>
>
>
> brandon wrote:
>
>>Does nayone have links to good resources for optimizing XP for audio
>>recording?
>>Or
>>Any suggestions.
>>I have two 7200 rpm drives and two 10k rpm sata drives.
>>How should I configure XP (install)...swap fil?... etc...
>>
>>Thx,
>>B
>>
>
> --
> Chris Ludwig
> ADK
> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> www.adkproaudio.com <http://www.adkproaudio.com/>
> (859) 635-5762

Report message to a moderator

Previous Topic:	first tracking session with Cubase 4 tonight.
Next Topic:	London studios in the 60s

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Dec 16 14:30:42 PST 2024

Total time taken to generate the page: 0.01267 seconds