The PARIS Forums


Home » The PARIS Forums » PARIS: Main » USB or Firewire to AES or Sp/Dif?
USB or Firewire to AES or Sp/Dif? [message #95917] Wed, 13 February 2008 21:53 Go to next message
dc[3] is currently offline  dc[3]
Messages: 895
Registered: September 2005
Senior Member
Anybody know of a good box to convert either USB or FW to
sp/dif or AES digital?

I would like to run a nice DAC from a computer as a house media server.

TIA

DC
Re: USB or Firewire to AES or Sp/Dif? [message #95939 is a reply to message #95917] Thu, 14 February 2008 08:37 Go to previous messageGo to next message
Chris Ludwig is currently offline  Chris Ludwig   UNITED STATES
Messages: 868
Registered: May 2006
Senior Member
HI HI DC,

Coaxial or Optical SPDIF? Surround or just stereo?

Chris


DC wrote:
> Anybody know of a good box to convert either USB or FW to
> sp/dif or AES digital?
>
> I would like to run a nice DAC from a computer as a house media server.
>
> TIA
>
> DC
>

--
Chris Ludwig

ADK Pro Audio
(859) 635-5762
www.adkproaudio.com
chrisl@adkproaudio.com
Re: USB or Firewire to AES or Sp/Dif? [message #95951 is a reply to message #95939] Thu, 14 February 2008 12:04 Go to previous messageGo to next message
dc[3] is currently offline  dc[3]
Messages: 895
Registered: September 2005
Senior Member
Stereo. Coax is better and AES is even better than that.

TIA

DC


Chris Ludwig <chrisl@adkproaudio.com> wrote:
>HI HI DC,
>
>Coaxial or Optical SPDIF? Surround or just stereo?
>
>Chris
>
>
>DC wrote:
>> Anybody know of a good box to convert either USB or FW to
>> sp/dif or AES digital?
>>
>> I would like to run a nice DAC from a computer as a house media server.
>>
>> TIA
>>
>> DC
>>
>
>--
>Chris Ludwig
>
>ADK Pro Audio
>(859) 635-5762
>www.adkproaudio.com
>chrisl@adkproaudio.com
Re: USB or Firewire to AES or Sp/Dif? [message #95958 is a reply to message #95951] Thu, 14 February 2008 12:04 Go to previous messageGo to next message
Chris Ludwig is currently offline  Chris Ludwig   UNITED STATES
Messages: 868
Registered: May 2006
Senior Member
HI DC,
I'm assuming this is a laptop?

Unless there are some obscure consumer audio device I'm not aware or the
only ones I know that have coaxial SPDIF are from Presonus, RME, MOTU,
M-Audio and tascam, etc.

All of them are probably over kill for what you want.

There are some optical SPDIF units out because that is the most common
in home theater.

If your laptop/has an optical spdif then I would just get a M-Audio CO2
to convert it to coaxial.

Chris


DC wrote:
> Stereo. Coax is better and AES is even better than that.
>
> TIA
>
> DC
>
>
> Chris Ludwig <chrisl@adkproaudio.com> wrote:
>> HI HI DC,
>>
>> Coaxial or Optical SPDIF? Surround or just stereo?
>>
>> Chris
>>
>>
>> DC wrote:
>>> Anybody know of a good box to convert either USB or FW to
>>> sp/dif or AES digital?
>>>
>>> I would like to run a nice DAC from a computer as a house media server.
>>>
>>> TIA
>>>
>>> DC
>>>
>> --
>> Chris Ludwig
>>
>> ADK Pro Audio
>> (859) 635-5762
>> www.adkproaudio.com
>> chrisl@adkproaudio.com
>

--
Chris Ludwig

ADK Pro Audio
(859) 635-5762
www.adkproaudio.com
chrisl@adkproaudio.com
Re: USB or Firewire to AES or Sp/Dif? [message #95961 is a reply to message #95958] Thu, 14 February 2008 13:36 Go to previous messageGo to next message
dc[3] is currently offline  dc[3]
Messages: 895
Registered: September 2005
Senior Member
It's a Mac Pro, and the goal is a house audio server. I don't want an
interface, since I already have the DAC. I just need to get USB or
FW into the AES or Sp/Dif input of the DAC.

DC


Chris Ludwig <chrisl@adkproaudio.com> wrote:
>HI DC,
> I'm assuming this is a laptop?
>
>Unless there are some obscure consumer audio device I'm not aware or the

>only ones I know that have coaxial SPDIF are from Presonus, RME, MOTU,
>M-Audio and tascam, etc.
>
>All of them are probably over kill for what you want.
>
>There are some optical SPDIF units out because that is the most common
>in home theater.
>
>If your laptop/has an optical spdif then I would just get a M-Audio CO2

>to convert it to coaxial.
>
>Chris
>
>
>DC wrote:
>> Stereo. Coax is better and AES is even better than that.
>>
>> TIA
>>
>> DC
>>
>>
>> Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>> HI HI DC,
>>>
>>> Coaxial or Optical SPDIF? Surround or just stereo?
>>>
>>> Chris
>>>
>>>
>>> DC wrote:
>>>> Anybody know of a good box to convert either USB or FW to
>>>> sp/dif or AES digital?
>>>>
>>>> I would like to run a nice DAC from a computer as a house media server.
>>>>
>>>> TIA
>>>>
>>>> DC
>>>>
>>> --
>>> Chris Ludwig
>>>
>>> ADK Pro Audio
>>> (859) 635-5762
>>> www.adkproaudio.com
>>> chrisl@adkproaudio.com
>>
>
>--
>Chris Ludwig
>
>ADK Pro Audio
>(859) 635-5762
>www.adkproaudio.com
>chrisl@adkproaudio.com
Re: USB or Firewire to AES or Sp/Dif? [message #95969 is a reply to message #95961] Thu, 14 February 2008 13:33 Go to previous messageGo to next message
Chris Ludwig is currently offline  Chris Ludwig   UNITED STATES
Messages: 868
Registered: May 2006
Senior Member
Hi DC,
Sense you already have optical SPDIF I/O built into the MAC and it
handle 24bit and up to 96k it would seem easiest to use the M-Audio CO2.
You can convert the optical to coaxial that way.

http://www.m-audio.com/products/en_us/CO2-main.html

They used to make a cool box called the CO3 that used to do Toslink to
AES but. Ebay is your only hope for that one though.


Chris


DC wrote:
> It's a Mac Pro, and the goal is a house audio server. I don't want an
> interface, since I already have the DAC. I just need to get USB or
> FW into the AES or Sp/Dif input of the DAC.
>
> DC
>
>
> Chris Ludwig <chrisl@adkproaudio.com> wrote:
>> HI DC,
>> I'm assuming this is a laptop?
>>
>> Unless there are some obscure consumer audio device I'm not aware or the
>
>> only ones I know that have coaxial SPDIF are from Presonus, RME, MOTU,
>> M-Audio and tascam, etc.
>>
>> All of them are probably over kill for what you want.
>>
>> There are some optical SPDIF units out because that is the most common
>> in home theater.
>>
>> If your laptop/has an optical spdif then I would just get a M-Audio CO2
>
>> to convert it to coaxial.
>>
>> Chris
>>
>>
>> DC wrote:
>>> Stereo. Coax is better and AES is even better than that.
>>>
>>> TIA
>>>
>>> DC
>>>
>>>
>>> Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>>> HI HI DC,
>>>>
>>>> Coaxial or Optical SPDIF? Surround or just stereo?
>>>>
>>>> Chris
>>>>
>>>>
>>>> DC wrote:
>>>>> Anybody know of a good box to convert either USB or FW to
>>>>> sp/dif or AES digital?
>>>>>
>>>>> I would like to run a nice DAC from a computer as a house media server.
>>>>>
>>>>> TIA
>>>>>
>>>>> DC
>>>>>
>>>> --
>>>> Chris Ludwig
>>>>
>>>> ADK Pro Audio
>>>> (859) 635-5762
>>>> www.adkproaudio.com
>>>> chrisl@adkproaudio.com
>> --
>> Chris Ludwig
>>
>> ADK Pro Audio
>> (859) 635-5762
>> www.adkproaudio.com
>> chrisl@adkproaudio.com
>

--
Chris Ludwig

ADK Pro Audio
(859) 635-5762
www.adkproaudio.com
chrisl@adkproaudio.com
Re: USB or Firewire to AES or Sp/Dif? [message #95970 is a reply to message #95969] Thu, 14 February 2008 15:09 Go to previous message
DC is currently offline  DC
Messages: 722
Registered: July 2005
Senior Member
Thanks!

DC


Chris Ludwig <chrisl@adkproaudio.com> wrote:
>Hi DC,
>Sense you already have optical SPDIF I/O built into the MAC and it
>handle 24bit and up to 96k it would seem easiest to use the M-Audio CO2.
>You can convert the optical to coaxial that way.
>
>http://www.m-audio.com/products/en_us/CO2-main.html
>
>They used to make a cool box called the CO3 that used to do Toslink to
>AES but. Ebay is your only hope for that one though.
>
>
>Chris
>
>
>DC wrote:
>> It's a Mac Pro, and the goal is a house audio server. I don't want an
>> interface, since I already have the DAC. I just need to get USB or
>> FW into the AES or Sp/Dif input of the DAC.
>>
>> DC
>>
>>
>> Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>> HI DC,
>>> I'm assuming this is a laptop?
>>>
>>> Unless there are some obscure consumer audio device I'm not aware or
the
>>
>>> only ones I know that have coaxial SPDIF are from Presonus, RME, MOTU,

>>> M-Audio and tascam, etc.
>>>
>>> All of them are probably over kill for what you want.
>>>
>>> There are some optical SPDIF units out because that is the most common

>>> in home theater.
>>>
>>> If your laptop/has an optical spdif then I would just get a M-Audio CO2
>>
>>> to convert it to coaxial.
>>>
>>> Chris
>>>
>>>
>>> DC wrote:
>>>> Stereo. Coax is better and AES is even better than that.
>>>>
>>>> TIA
>>>>
>>>> DC
>>>>
>>>>
>>>> Chris Ludwig <chrisl@adkproaudio.com> wrote:
>>>>> HI HI DC,
>>>>>
>>>>> Coaxial or Optical SPDIF? Surround or just stereo?
>>>>>
>>>>> Chris
>>>>>
>>>>>
>>>>> DC wrote:
>>>>>> Anybody know of a good box to convert either USB or FW to
>>>>>> sp/dif or AES digital?
>>>>>>
>>>>>> I would like to run a nice DAC from a computer as a house media server.
>>>>>>
>>>>>> TIA
>>>>>>
>>>>>> DC
>>>>>>
>>>>> --
>>>>> Chris Ludwig
>>>>>
>>>>> ADK Pro Audio
>>>>> (859) 635-5762
>>>>> www.adkproaudio.com
>>>>> chrisl@adkproaudio.com
>>> --
>>> Chris Ludwig
>>>
>>> ADK Pro Audio
>>> (859) 635-5762
>>> www.adkproaudio.com
>>> chrisl@adkproaudio.com
>>
>
>--
>Chris Ludwig
>
>ADK Pro Audio
>(859) 635-5762
>www.adkproaudio.com
>chrisl@adkproaudio.com
Previous Topic: New Mac software
Next Topic: Arrrgghhh!!!!! where'd my click track go?
Goto Forum:
  


Current Time: Tue Nov 19 14:51:35 PST 2024

Total time taken to generate the page: 0.01226 seconds