The PARIS Forums: PARIS: Main » EDS-1000 card power draw?

Home » The PARIS Forums » PARIS: Main » EDS-1000 card power draw?

Show: Today's Messages :: Polls :: Message Navigator

EDS-1000 card power draw? [message #106573]

Fri, 01 July 2011 18:38

thesandbox1

Messages: 167
Registered: July 2009
Location: Carmel, IN

Senior Member

Does anyone know the exact power draw in watts or amps of the EDS-cards. My old PSU in my my magnum chassis died and was going to replace it with a quiet or fanless PSU but it seems since there are less 5V requirements on newer computers even some of the beefier PSUs only have 100w max on the 3.3 and 5v channels. I did find a used Antec 500 Phantom that does 150w and just curious what the EDS card draw is. The old PSU gave 200w to the 5v or 40A. I have 4 cards in there right now and have had a 5th and might eventually move my 2 UAD cards in there if I do a new Win7 build.

https://www.facebook.com/Sandbox-Productions-Recording-Studi o-Carmel-IN-122733877784336/

Report message to a moderator

Re: EDS-1000 card power draw? [message #106574 is a reply to message #106573]

Sat, 02 July 2011 20:12

thesandbox1

Messages: 167
Registered: July 2009
Location: Carmel, IN

Senior Member

Should be okay...looking at the PSU on my old 7 slot and it was 140w for the 5v rail and had 4 cards in it. Still would like to know the power draw of the EDS card if someone happens to come across it.

https://www.facebook.com/Sandbox-Productions-Recording-Studi o-Carmel-IN-122733877784336/

Report message to a moderator

Previous Topic:	The Right PC for Paris
Next Topic:	Should I resurrect the old skunkworks hardware projects?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat May 31 22:59:41 PDT 2025

Total time taken to generate the page: 0.01694 seconds