Home » The PARIS Forums » PARIS: Main » Error Intializing Paris with 2 EDS cards
|
|
Re: Error Intializing Paris with 2 EDS cards [message #66766 is a reply to message #66764] |
Sat, 15 April 2006 02:56 |
Chris Griffiths
Messages: 7 Registered: April 2006
|
Junior Member |
|
|
Yes, cables are connected properly - but I can't seem to even get far enough
to have Paris load at all with the 2 Eds plugged in - let alone any problems
with the cards sync'ing properly. Are you saying that Paris won't load if
the cables weren't connected? Maybe I have a faulty cable?
Chris
"rick" <parnell68@hotmail.com> wrote in message
news:k8g1429ng6f9r7hjdh6qc83qa98evsbvpa@4ax.com...
> i'm assuming you have the cables connecting the 2 cards installed
> properly in a X pattern
>
> On Sat, 15 Apr 2006 18:23:28 +1000, "Chris Griffiths"
> <cgriffo@aapt.net.au> wrote:
>
>>Can anyone help?
>>
>>I have just installed a second EDS card. When I load Paris it tells me
>>that
>>I have "Error in initializing . . ." - "No interface connected to master
>>card". I have tried switching my interface from one EDS to the other but I
>>get the same problem. When I disable the driver for one of the EDSs, or
>>have
>>only EDS plugged in, Paris loads fine - ie. I do not have a faulty EDS
>>card,
>>they both work independently.
>>
>>Summary: Both EDS's work fine as a single card with my interface - which
>>is
>>"Interface 2". When both cards are plugged in, they are in slot 4 and slot
>>5
>>with IRQs 20 & 21 respectively - there appears to be no conflict. I'm
>>using
>>XP, with Version 3 of Paris which is working fine with one card. I just
>>can't seem to get Paris to load with both EDS cards.
>>
>>Any Ideas?
>>
>>Cheers,
>>
>>Chris.
>>
>
|
|
|
Re: Error Intializing Paris with 2 EDS cards [message #66774 is a reply to message #66766] |
Sat, 15 April 2006 08:23 |
Dave Geoghegan
Messages: 8 Registered: June 2005
|
Junior Member |
|
|
Hi,
I sometimes get that when (I'm running 2 EDS XP also). I find that if the
MEC's are powered down when I boot I get it , but I also get it randomly.
If I try Paris 2-3 times it alsways seems to work.
Thanks,
Dave
"Chris Griffiths" <cgriffo@aapt.net.au> wrote:
>Yes, cables are connected properly - but I can't seem to even get far enough
>to have Paris load at all with the 2 Eds plugged in - let alone any problems
>with the cards sync'ing properly. Are you saying that Paris won't load if
>the cables weren't connected? Maybe I have a faulty cable?
>
>Chris
>
>"rick" <parnell68@hotmail.com> wrote in message
>news:k8g1429ng6f9r7hjdh6qc83qa98evsbvpa@4ax.com...
>> i'm assuming you have the cables connecting the 2 cards installed
>> properly in a X pattern
>>
>> On Sat, 15 Apr 2006 18:23:28 +1000, "Chris Griffiths"
>> <cgriffo@aapt.net.au> wrote:
>>
>>>Can anyone help?
>>>
>>>I have just installed a second EDS card. When I load Paris it tells me
>>>that
>>>I have "Error in initializing . . ." - "No interface connected to master
>>>card". I have tried switching my interface from one EDS to the other but
I
>>>get the same problem. When I disable the driver for one of the EDSs, or
>>>have
>>>only EDS plugged in, Paris loads fine - ie. I do not have a faulty EDS
>>>card,
>>>they both work independently.
>>>
>>>Summary: Both EDS's work fine as a single card with my interface - which
>>>is
>>>"Interface 2". When both cards are plugged in, they are in slot 4 and
slot
>>>5
>>>with IRQs 20 & 21 respectively - there appears to be no conflict. I'm
>>>using
>>>XP, with Version 3 of Paris which is working fine with one card. I just
>>>can't seem to get Paris to load with both EDS cards.
>>>
>>>Any Ideas?
>>>
>>>Cheers,
>>>
>>>Chris.
>>>
>>
>
>
|
|
|
Re: Error Intializing Paris with 2 EDS cards [message #66792 is a reply to message #66759] |
Sat, 15 April 2006 11:56 |
Aaron Allen
Messages: 1988 Registered: May 2008
|
Senior Member |
|
|
Chris, here's the problem. Once you move past one EDS card, you have to use
either a 442 or a MEC interface - IF2 does not work with more than one EDS
card unless you have it plugged through the 442/MEC.
Sorry bro for the news, but picking up a used MEC or 442 these days is dirt
cheap.
AA
"Chris Griffiths" <cgriffo@aapt.net.au> wrote in message
news:4440ace2@linux...
> Can anyone help?
>
> I have just installed a second EDS card. When I load Paris it tells me
> that I have "Error in initializing . . ." - "No interface connected to
> master card". I have tried switching my interface from one EDS to the
> other but I get the same problem. When I disable the driver for one of the
> EDSs, or have only EDS plugged in, Paris loads fine - ie. I do not have a
> faulty EDS card, they both work independently.
>
> Summary: Both EDS's work fine as a single card with my interface - which
> is "Interface 2". When both cards are plugged in, they are in slot 4 and
> slot 5 with IRQs 20 & 21 respectively - there appears to be no conflict.
> I'm using XP, with Version 3 of Paris which is working fine with one card.
> I just can't seem to get Paris to load with both EDS cards.
>
> Any Ideas?
>
> Cheers,
>
> Chris.
>
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
|
|
|
Goto Forum:
Current Time: Sun Dec 29 17:02:12 PST 2024
Total time taken to generate the page: 0.01074 seconds
|