The PARIS Forums: PARIS: Main » Heh...heh...heh!!!......next time I get bored...........

Home » The PARIS Forums » PARIS: Main » Heh...heh...heh!!!......next time I get bored...........

Show: Today's Messages :: Polls :: Message Navigator

Heh...heh...heh!!!......next time I get bored........... [message #71990]

Sat, 02 September 2006 22:39

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and see if I
can get them all talkin' using this puppy............

http://www.asio4all.com/

I can already feel the pain......

;o)

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #71991 is a reply to message #71990]

Sun, 03 September 2006 03:07

rick

Messages: 1976
Registered: February 2006

Senior Member

you are one sick puppy and i can only imagine what's in your
basement...

On Sat, 2 Sep 2006 23:39:30 -0600, "DJ"
<animix_spam-this-ahole_@animas.net> wrote:

>I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and see if I
>can get them all talkin' using this puppy............
>
>http://www.asio4all.com/
>
>I can already feel the pain......
>
>;o)
>

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #71995 is a reply to message #71990]

Sun, 03 September 2006 07:50

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

Ha Sucker

DJ wrote:
> I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and see if I
> can get them all talkin' using this puppy............
>
> http://www.asio4all.com/
>
> I can already feel the pain......
>
> ;o)
>
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #71996 is a reply to message #71991]

Sun, 03 September 2006 08:35

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

you are one sick puppy and i can only imagine what's in your
> basement...

If anyone ever dug up the crawl space they would find at lest 30 computers
that were abused, killed and buried down there.

"rick" <parnell68@hotmail.com> wrote in message
news:j9alf29487ebbpc0vhqp2rgo4s16vvt9u9@4ax.com...
> you are one sick puppy and i can only imagine what's in your
> basement...
>
> On Sat, 2 Sep 2006 23:39:30 -0600, "DJ"
> <animix_spam-this-ahole_@animas.net> wrote:
>
> >I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and see
if I
> >can get them all talkin' using this puppy............
> >
> >http://www.asio4all.com/
> >
> >I can already feel the pain......
> >
> >;o)
> >
>

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #71997 is a reply to message #71996]

Sun, 03 September 2006 09:02

chuck duffy
Messages: 453
Registered: July 2005

Senior Member

Hey did you watch the Gacy restrospective last night too?

Chuck

"DJ" <animix_spam-this-ahole_@animas.net> wrote:
> you are one sick puppy and i can only imagine what's in your
>> basement...
>
>If anyone ever dug up the crawl space they would find at lest 30 computers
>that were abused, killed and buried down there.
>
>"rick" <parnell68@hotmail.com> wrote in message
>news:j9alf29487ebbpc0vhqp2rgo4s16vvt9u9@4ax.com...
>> you are one sick puppy and i can only imagine what's in your
>> basement...
>>
>> On Sat, 2 Sep 2006 23:39:30 -0600, "DJ"
>> <animix_spam-this-ahole_@animas.net> wrote:
>>
>> >I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and see
>if I
>> >can get them all talkin' using this puppy............
>> >
>> >http://www.asio4all.com/
>> >
>> >I can already feel the pain......
>> >
>> >;o)
>> >
>>
>
>

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #71998 is a reply to message #71995]

Sun, 03 September 2006 09:09

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

Actually, I doubt if my poor PCI bus could handle another thing..........but
I do have another slot on the mobo that can be used for something
dammit!!!!.........maybe a decent FW card so I could hang something else on
this DAW. More digital I/O that could be interfaced with external processors
during mixdown would be very useful.

The A8V-DLX became so stable after I got rid of the Matrox P750 and started
using the GEForce 5500 that I never did do the new build using the NForce3
mobo. The FW port shares with the graphics card on the A8V mobo so I'm
thinking that a PCI FW card might be the ticket to squeezing the last
possible bit of utility out of this mobo while keeping whatever device off
the IRQ that is preempted by the AGP......... if the extra PCI bandwidth
used by the FW device doesn't cause the system to implode. Right now, in
Cubase I'm able to stream 40 tracks to Paris for summing while using an
additional 16 ADAT I/O configured as stereo I/O interfaced with 8 x Paris
aux busses and the 3 pair of S/Pdif I/O of the RME cards are interfaced with
3 x different outboard processors and all of this is happening while using
almost 90% of the resources of 4 x UAD-1 cards. I really don't know if the
PCI bus could handle much more.

The ASIO4all website isn't reporting such great luck with the Fireface so
I'm wondering if the HDSP 9652 and Multiface won't talk to this thing
properly either. Adding a LynxTwo interface with multiple AES I/O would be
very sweet for my situation.

;o)

"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:44faea2a@linux...
> Ha Sucker
>
>
> DJ wrote:
> > I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and see
if I
> > can get them all talkin' using this puppy............
> >
> > http://www.asio4all.com/
> >
> > I can already feel the pain......
> >
> > ;o)
> >
> >
>
> --
> Chris Ludwig
> ADK
> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> www.adkproaudio.com <http://www.adkproaudio.com/>
> (859) 635-5762

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #71999 is a reply to message #71997]

Sun, 03 September 2006 09:11

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

When I mix, I wear a clown suit........

;o)

"Chuck Duffy" <c@c.com> wrote in message news:44fafc87$1@linux...
>
> Hey did you watch the Gacy restrospective last night too?
>
> Chuck
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> > you are one sick puppy and i can only imagine what's in your
> >> basement...
> >
> >If anyone ever dug up the crawl space they would find at lest 30
computers
> >that were abused, killed and buried down there.
> >
> >"rick" <parnell68@hotmail.com> wrote in message
> >news:j9alf29487ebbpc0vhqp2rgo4s16vvt9u9@4ax.com...
> >> you are one sick puppy and i can only imagine what's in your
> >> basement...
> >>
> >> On Sat, 2 Sep 2006 23:39:30 -0600, "DJ"
> >> <animix_spam-this-ahole_@animas.net> wrote:
> >>
> >> >I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and
see
> >if I
> >> >can get them all talkin' using this puppy............
> >> >
> >> >http://www.asio4all.com/
> >> >
> >> >I can already feel the pain......
> >> >
> >> >;o)
> >> >
> >>
> >
> >
>

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #72004 is a reply to message #71999]

Sun, 03 September 2006 10:42

rick

Messages: 1976
Registered: February 2006

Senior Member

pennywise...is that really you???

On Sun, 3 Sep 2006 10:11:32 -0600, "DJ"
<animix_spam-this-ahole_@animas.net> wrote:

>When I mix, I wear a clown suit........
>
>;o)
>
>"Chuck Duffy" <c@c.com> wrote in message news:44fafc87$1@linux...
>>
>> Hey did you watch the Gacy restrospective last night too?
>>
>> Chuck
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
>> > you are one sick puppy and i can only imagine what's in your
>> >> basement...
>> >
>> >If anyone ever dug up the crawl space they would find at lest 30
>computers
>> >that were abused, killed and buried down there.
>> >
>> >"rick" <parnell68@hotmail.com> wrote in message
>> >news:j9alf29487ebbpc0vhqp2rgo4s16vvt9u9@4ax.com...
>> >> you are one sick puppy and i can only imagine what's in your
>> >> basement...
>> >>
>> >> On Sat, 2 Sep 2006 23:39:30 -0600, "DJ"
>> >> <animix_spam-this-ahole_@animas.net> wrote:
>> >>
>> >> >I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and
>see
>> >if I
>> >> >can get them all talkin' using this puppy............
>> >> >
>> >> >http://www.asio4all.com/
>> >> >
>> >> >I can already feel the pain......
>> >> >
>> >> >;o)
>> >> >
>> >>
>> >
>> >
>>
>

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #72005 is a reply to message #71998]

Sun, 03 September 2006 10:43

rick

Messages: 1976
Registered: February 2006

Senior Member

"Actually, I doubt if my poor PCI bus could handle another
thing..........but" a toaster slot?

>I do have another slot on the mobo that can be used for something
>dammit!!!!

On Sun, 3 Sep 2006 10:09:51 -0600, "DJ"
<animix_spam-this-ahole_@animas.net> wrote:

>Actually, I doubt if my poor PCI bus could handle another thing..........but
>I do have another slot on the mobo that can be used for something
>dammit!!!!.........maybe a decent FW card so I could hang something else on
>this DAW. More digital I/O that could be interfaced with external processors
>during mixdown would be very useful.
>
>The A8V-DLX became so stable after I got rid of the Matrox P750 and started
>using the GEForce 5500 that I never did do the new build using the NForce3
>mobo. The FW port shares with the graphics card on the A8V mobo so I'm
>thinking that a PCI FW card might be the ticket to squeezing the last
>possible bit of utility out of this mobo while keeping whatever device off
>the IRQ that is preempted by the AGP......... if the extra PCI bandwidth
>used by the FW device doesn't cause the system to implode. Right now, in
>Cubase I'm able to stream 40 tracks to Paris for summing while using an
>additional 16 ADAT I/O configured as stereo I/O interfaced with 8 x Paris
>aux busses and the 3 pair of S/Pdif I/O of the RME cards are interfaced with
>3 x different outboard processors and all of this is happening while using
>almost 90% of the resources of 4 x UAD-1 cards. I really don't know if the
>PCI bus could handle much more.
>
>The ASIO4all website isn't reporting such great luck with the Fireface so
>I'm wondering if the HDSP 9652 and Multiface won't talk to this thing
>properly either. Adding a LynxTwo interface with multiple AES I/O would be
>very sweet for my situation.
>
>;o)
>
>"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
>news:44faea2a@linux...
>> Ha Sucker
>>
>>
>> DJ wrote:
>> > I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and see
>if I
>> > can get them all talkin' using this puppy............
>> >
>> > http://www.asio4all.com/
>> >
>> > I can already feel the pain......
>> >
>> > ;o)
>> >
>> >
>>
>> --
>> Chris Ludwig
>> ADK
>> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>> www.adkproaudio.com <http://www.adkproaudio.com/>
>> (859) 635-5762
>

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #72010 is a reply to message #71998]

Sun, 03 September 2006 12:22

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

HI DJ,
With ASIO4All you will get the highest common latency, i.e., if one of
the cards can only go down to 3 or 6 ms then that latency will be the
lowest you can go no matter how low some other card may go.
The Lynx will be a pretty expensive experiment.

Still sound Like you need a MADI card setup but just willing to admit it..:)

Chris

DJ wrote:
> Actually, I doubt if my poor PCI bus could handle another thing..........but
> I do have another slot on the mobo that can be used for something
> dammit!!!!.........maybe a decent FW card so I could hang something else on
> this DAW. More digital I/O that could be interfaced with external processors
> during mixdown would be very useful.
>
> The A8V-DLX became so stable after I got rid of the Matrox P750 and started
> using the GEForce 5500 that I never did do the new build using the NForce3
> mobo. The FW port shares with the graphics card on the A8V mobo so I'm
> thinking that a PCI FW card might be the ticket to squeezing the last
> possible bit of utility out of this mobo while keeping whatever device off
> the IRQ that is preempted by the AGP......... if the extra PCI bandwidth
> used by the FW device doesn't cause the system to implode. Right now, in
> Cubase I'm able to stream 40 tracks to Paris for summing while using an
> additional 16 ADAT I/O configured as stereo I/O interfaced with 8 x Paris
> aux busses and the 3 pair of S/Pdif I/O of the RME cards are interfaced with
> 3 x different outboard processors and all of this is happening while using
> almost 90% of the resources of 4 x UAD-1 cards. I really don't know if the
> PCI bus could handle much more.
>
> The ASIO4all website isn't reporting such great luck with the Fireface so
> I'm wondering if the HDSP 9652 and Multiface won't talk to this thing
> properly either. Adding a LynxTwo interface with multiple AES I/O would be
> very sweet for my situation.
>
> ;o)
>
> "Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
> news:44faea2a@linux...
>
>>Ha Sucker
>>
>>
>>DJ wrote:
>>
>>>I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and see
>
> if I
>
>>>can get them all talkin' using this puppy............
>>>
>>>http://www.asio4all.com/
>>>
>>>I can already feel the pain......
>>>
>>>;o)
>>>
>>>
>>
>>--
>>Chris Ludwig
>>ADK
>>chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>>www.adkproaudio.com <http://www.adkproaudio.com/>
>>(859) 635-5762
>
>
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #72012 is a reply to message #72010]

Sun, 03 September 2006 12:19

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:44fb29ce@linux...
> HI DJ,
> With ASIO4All you will get the highest common latency, i.e., if one of
> the cards can only go down to 3 or 6 ms then that latency will be the
> lowest you can go no matter how low some other card may go.
> The Lynx will be a pretty expensive experiment.

I don't track to SX so latency is not really a problem when I'm mixing. SX
covers PDC so unless this somehow messes up the plugin latency compensation,
I would be good to go.
>
> Still sound Like you need a MADI card setup but just willing to admit
it..:)

Now Chris............what's the fun in configuring something that you know
is gonna work?

;o)

>
>
> Chris
>
>
>
> DJ wrote:
> > Actually, I doubt if my poor PCI bus could handle another
thing..........but
> > I do have another slot on the mobo that can be used for something
> > dammit!!!!.........maybe a decent FW card so I could hang something else
on
> > this DAW. More digital I/O that could be interfaced with external
processors
> > during mixdown would be very useful.
> >
> > The A8V-DLX became so stable after I got rid of the Matrox P750 and
started
> > using the GEForce 5500 that I never did do the new build using the
NForce3
> > mobo. The FW port shares with the graphics card on the A8V mobo so I'm
> > thinking that a PCI FW card might be the ticket to squeezing the last
> > possible bit of utility out of this mobo while keeping whatever device
off
> > the IRQ that is preempted by the AGP......... if the extra PCI bandwidth
> > used by the FW device doesn't cause the system to implode. Right now, in
> > Cubase I'm able to stream 40 tracks to Paris for summing while using an
> > additional 16 ADAT I/O configured as stereo I/O interfaced with 8 x
Paris
> > aux busses and the 3 pair of S/Pdif I/O of the RME cards are interfaced
with
> > 3 x different outboard processors and all of this is happening while
using
> > almost 90% of the resources of 4 x UAD-1 cards. I really don't know if
the
> > PCI bus could handle much more.
> >
> > The ASIO4all website isn't reporting such great luck with the Fireface
so
> > I'm wondering if the HDSP 9652 and Multiface won't talk to this thing
> > properly either. Adding a LynxTwo interface with multiple AES I/O would
be
> > very sweet for my situation.
> >
> > ;o)
> >
> > "Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
> > news:44faea2a@linux...
> >
> >>Ha Sucker
> >>
> >>
> >>DJ wrote:
> >>
> >>>I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and see
> >
> > if I
> >
> >>>can get them all talkin' using this puppy............
> >>>
> >>>http://www.asio4all.com/
> >>>
> >>>I can already feel the pain......
> >>>
> >>>;o)
> >>>
> >>>
> >>
> >>--
> >>Chris Ludwig
> >>ADK
> >>chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> >>www.adkproaudio.com <http://www.adkproaudio.com/>
> >>(859) 635-5762
> >
> >
> >
>
> --
> Chris Ludwig
> ADK
> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> www.adkproaudio.com <http://www.adkproaudio.com/>
> (859) 635-5762

Report message to a moderator

Re: Heh...heh...heh!!!......next time I get bored........... [message #72022 is a reply to message #72012]

Sun, 03 September 2006 21:54

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

HI DJ,

DJ wrote:
> "Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
> news:44fb29ce@linux...
>
>>HI DJ,
>>With ASIO4All you will get the highest common latency, i.e., if one of
>>the cards can only go down to 3 or 6 ms then that latency will be the
>>lowest you can go no matter how low some other card may go.
>>The Lynx will be a pretty expensive experiment.
>
>
> I don't track to SX so latency is not really a problem when I'm mixing. SX
> covers PDC so unless this somehow messes up the plugin latency compensation,
> I would be good to go.
>
>>Still sound Like you need a MADI card setup but just willing to admit
>
> it..:)
>
>
> Now Chris............what's the fun in configuring something that you know
> is gonna work?
>
> ;o)
>

Ha True True

>
>>
>>Chris
>>
>>
>>
>>DJ wrote:
>>
>>>Actually, I doubt if my poor PCI bus could handle another
>
> thing..........but
>
>>>I do have another slot on the mobo that can be used for something
>>>dammit!!!!.........maybe a decent FW card so I could hang something else
>
> on
>
>>>this DAW. More digital I/O that could be interfaced with external
>
> processors
>
>>>during mixdown would be very useful.
>>>
>>>The A8V-DLX became so stable after I got rid of the Matrox P750 and
>
> started
>
>>>using the GEForce 5500 that I never did do the new build using the
>
> NForce3
>
>>>mobo. The FW port shares with the graphics card on the A8V mobo so I'm
>>>thinking that a PCI FW card might be the ticket to squeezing the last
>>>possible bit of utility out of this mobo while keeping whatever device
>
> off
>
>>>the IRQ that is preempted by the AGP......... if the extra PCI bandwidth
>>>used by the FW device doesn't cause the system to implode. Right now, in
>>>Cubase I'm able to stream 40 tracks to Paris for summing while using an
>>>additional 16 ADAT I/O configured as stereo I/O interfaced with 8 x
>
> Paris
>
>>>aux busses and the 3 pair of S/Pdif I/O of the RME cards are interfaced
>
> with
>
>>>3 x different outboard processors and all of this is happening while
>
> using
>
>>>almost 90% of the resources of 4 x UAD-1 cards. I really don't know if
>
> the
>
>>>PCI bus could handle much more.
>>>
>>>The ASIO4all website isn't reporting such great luck with the Fireface
>
> so
>
>>>I'm wondering if the HDSP 9652 and Multiface won't talk to this thing
>>>properly either. Adding a LynxTwo interface with multiple AES I/O would
>
> be
>
>>>very sweet for my situation.
>>>
>>>;o)
>>>
>>>"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
>>>news:44faea2a@linux...
>>>
>>>
>>>>Ha Sucker
>>>>
>>>>
>>>>DJ wrote:
>>>>
>>>>
>>>>>I'm gonna add an E-MU 1820M to my 3 RME cards in the Cubase rig and see
>>>
>>>if I
>>>
>>>
>>>>>can get them all talkin' using this puppy............
>>>>>
>>>>>http://www.asio4all.com/
>>>>>
>>>>>I can already feel the pain......
>>>>>
>>>>>;o)
>>>>>
>>>>>
>>>>
>>>>--
>>>>Chris Ludwig
>>>>ADK
>>>>chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>>>>www.adkproaudio.com <http://www.adkproaudio.com/>
>>>>(859) 635-5762
>>>
>>>
>>>
>>--
>>Chris Ludwig
>>ADK
>>chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>>www.adkproaudio.com <http://www.adkproaudio.com/>
>>(859) 635-5762
>
>
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762

Report message to a moderator

Previous Topic:	Mixing outside of Paris
Next Topic:	RME Octamic-D: Anyone familiar?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Dec 17 08:15:19 PST 2024

Total time taken to generate the page: 0.10903 seconds