The PARIS Forums: PARIS: Main » Monitors for Paris

Home » The PARIS Forums » PARIS: Main » Monitors for Paris

Show: Today's Messages :: Polls :: Message Navigator

Monitors for Paris [message #109666]

Mon, 02 September 2019 13:23

SummingStrange

Messages: 43
Registered: April 2017
Location: Downunder

Member

Disappeared there for a while, sorry and it's good to be back doing something I want to do!

I'm looking to set up dual monitors for Paris and was wondering what people were using.

I suddenly thought do I need to get 5:4 screens (closest thing to 4:3 these days)?

Or what about one of those really wide monitors that are all the rage now. Most of them have two video inputs so they can operate as two separate screens. You can still use the windows monitor settings and get a desktop on one side and then move whatever you want on the other side. Does anyone use one of these?

It would be good if you could let me know the resolution or size of the screens that you use. I will probably get a video card to give me two HDMI or display port connections rather than the crappy dsub RGB connection. My mobo has dsub plus HDMI or display port but not HDMI and display port at the same time.

Report message to a moderator

Re: Monitors for Paris [message #109678 is a reply to message #109666]

Thu, 05 September 2019 06:38

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

There's definitely no need to get an old school 4:3 screen these days. I'm using a 24 inch 1920 x 1080, and if anything, wide screen monitors have finally caught up to the PARIS UI. I could never get 16 channels on the screen at once in the old days. Now, I can.

I hope this helps!

Mike

Report message to a moderator

Re: Monitors for Paris [message #109679 is a reply to message #109666]

Thu, 05 September 2019 17:47

SummingStrange

Messages: 43
Registered: April 2017
Location: Downunder

Member

Thanks Mike, that does help quite a lot - getting 16 channels on one screen seems like a good thing!

Cheers Raph

[Updated on: Thu, 05 September 2019 17:48]

Report message to a moderator

Re: Monitors for Paris [message #109686 is a reply to message #109666]

Sun, 08 September 2019 11:51

Kim W.

Messages: 189
Registered: January 2010
Location: Australia

Senior Member

Using 4 24" HP monitors here. (One for each of the four EDS's). Pure Bliss! No scrolling. Cost me 30 bucks each from a Government auction house. I have two dual output Nvidia PCI-x cards running them. Interesting that Mike says they have issues. I also have an ATI Quadfire card. Perhaps I should try that?? (Mike??).
Since my new build, with two SSD drives, (one boot, one audio), an annoying issue has come to light. The first time I boot, the Paris exe will NOT load. (Sometimes during hardware initialization, and sometimes during initialization of DirectX/EDS effects. I have to terminate the app, and start again. Second attempt loads every time. It's almost as if Windows loads too quickly and needs time to settle before Paris will load on first attempt. Anyone else experienced this?? (I may have to start a new thread, as this is outside the initial "Monitors for Paris" thread.
Cheers,
Kim W.

Report message to a moderator

Re: Monitors for Paris [message #109689 is a reply to message #109686]

Mon, 09 September 2019 08:24

mikeaudet

Messages: 477
Registered: February 2009
Location: Canada

Senior Member

Hi Kim,

The Nvidia cards are known to case small freezes because of large DPC latency. PARIS uses a 3000 sample buffer sizes, so it doesn't care. With an ASIO host set to 32 samples, the small delays are a problem.

What version of the driver are you using? That's a strange one.

All the best,
Mike

Report message to a moderator

Re: Monitors for Paris [message #109691 is a reply to message #109666]

Mon, 09 September 2019 12:36

SummingStrange

Messages: 43
Registered: April 2017
Location: Downunder

Member

Cheers Kim, and I may be able to add to the SSD issue when my system is running (finally) because I went with SSD drives as well. Sounds like you have a great monitor setup!

I think I'll start off with a couple of monitors running off the built in GPU via the RGB and HDMI\DVI outs. I was thinking that using a dedicated GPU would take load off the CPU but jeez Paris ran on late 90's PC's so I think it will be fine.

Thanks for the explanation about the DPC latency Mike and good to know that I could go to a NVIDIA Graphics card if I wanted to - Paris won't care.

Report message to a moderator

Re: Monitors for Paris [message #109822 is a reply to message #109686]

Thu, 26 March 2020 17:41

Rich.Kelley

Messages: 98
Registered: August 2009

Member

Hi Kim,

On the new build that I just did (detailed in the thread: New PARIS System) I have what sounds like the same issue. I have to do a RESTART before I launch PARIS. If I try to launch PARIS right after startup it just hangs, but it launches without fail if I do a RESTART. I talk about it in detail in the thread if you're interested.

Report message to a moderator

Re: Monitors for Paris [message #109823 is a reply to message #109691]

Thu, 26 March 2020 17:48

Rich.Kelley

Messages: 98
Registered: August 2009

Member

On the new Intel i5-9400/Asus Z390A system I just build I added a MSI GT1030 2GH LP OC video card - so an NVIDIA card. I am now running 3 2560x1440 32 inch monitors between the card and the video driver on the i5. I think I could run 4 monitors this size.

I failed to read this thread before I bought the card, but the good news is that there doesn't seem to be any issue, at least when playing back a large, fairly messy project. I'll keep you updated.

Report message to a moderator

Previous Topic:	Creating Submixes with only 1 eds1000
Next Topic:	NIXSYS legacy computers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Dec 27 22:44:46 PST 2024

Total time taken to generate the page: 0.01147 seconds