The PARIS Forums: PARIS: Main » Getting ready to build myself some WC cables-need lowest possible capacitance.

Home » The PARIS Forums » PARIS: Main » Getting ready to build myself some WC cables-need lowest possible capacitance.

Show: Today's Messages :: Polls :: Message Navigator

Getting ready to build myself some WC cables-need lowest possible capacitance. [message #68676]

Sat, 27 May 2006 10:00

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

I want to build some WC cables of equal length. Thje intital run from my
master clock to the distro module is 4 meters so the remaining 9 cables I
need to build (8 more WC cables and one AES cable) will need to be 4 meters
also. I can't afford the premade Zoalla or Apogee stuff. I'm looking for raw
75 ohm (and 110 ohm) cable of the highest quality I can afford with the best
connectors I can afford. I don't want my square waves even thinking about
turning into triangle waves due to high capacitance.

I know Canare is good stuff. I have some 110 ohm Mogami here. What would
youse guys suggest for the lowest capacitance?

Thanks,

Deej

Report message to a moderator

Re: Getting ready to build myself some WC cables-need lowest possiblecapacitance. [message #68680 is a reply to message #68676]

Sat, 27 May 2006 10:30

EK Sound

Messages: 939
Registered: June 2005

Senior Member

Hey DJ,

This is what I use here...

LV61S:
http://www.canare.com/index.cfm?objectid=0D01B44F-3048-7098- AF1C088D26068A8A

BCP Plugs:
http://www.canare.com/index.cfm?objectid=7222AEAE-3048-7098- AF30E16BAE049F58

AES Cable (110 Ohm):
http://www.canare.com/index.cfm?objectid=EDD1B80A-3048-7098- AFD22323EAB88532

I get great results with the LV61S coax for word clock and SPDIF. The
only thing is, you will need to buy an appropriate crimp tool to
attach the ends. Proper 75Ohm ends can not be soldered... only
crimped. I have some 25' runs of this feeding the Paris and Nuendo
computers, and several other devices with no trouble. The DA202 is a
really nice 110 Ohm AES cable that fits well into XLR plugs. Note...
use Switchcraft XLR connectors for AES signals... the standard Neutrik
plugs mess with the impedance somewhat.

David.

DJ wrote:
> I want to build some WC cables of equal length. Thje intital run from my
> master clock to the distro module is 4 meters so the remaining 9 cables I
> need to build (8 more WC cables and one AES cable) will need to be 4 meters
> also. I can't afford the premade Zoalla or Apogee stuff. I'm looking for raw
> 75 ohm (and 110 ohm) cable of the highest quality I can afford with the best
> connectors I can afford. I don't want my square waves even thinking about
> turning into triangle waves due to high capacitance.
>
> I know Canare is good stuff. I have some 110 ohm Mogami here. What would
> youse guys suggest for the lowest capacitance?
>
> Thanks,
>
> Deej
>
>

Report message to a moderator

Re: Getting ready to build myself some WC cables-need lowest possible capacitance. [message #68689 is a reply to message #68680]

Sat, 27 May 2006 11:00

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

Thanks Dave. I think the purchase of a crimping tool would be in order
considering the cost of premade cables.

;o)

"EK Sound" <askme@nospam.com> wrote in message news:44788c00@linux...
> Hey DJ,
>
> This is what I use here...
>
> LV61S:
>
http://www.canare.com/index.cfm?objectid=0D01B44F-3048-7098- AF1C088D26068A8A
>
> BCP Plugs:
>
http://www.canare.com/index.cfm?objectid=7222AEAE-3048-7098- AF30E16BAE049F58
>
> AES Cable (110 Ohm):
>
http://www.canare.com/index.cfm?objectid=EDD1B80A-3048-7098- AFD22323EAB88532
>
> I get great results with the LV61S coax for word clock and SPDIF. The
> only thing is, you will need to buy an appropriate crimp tool to
> attach the ends. Proper 75Ohm ends can not be soldered... only
> crimped. I have some 25' runs of this feeding the Paris and Nuendo
> computers, and several other devices with no trouble. The DA202 is a
> really nice 110 Ohm AES cable that fits well into XLR plugs. Note...
> use Switchcraft XLR connectors for AES signals... the standard Neutrik
> plugs mess with the impedance somewhat.
>
> David.
>
>
> DJ wrote:
> > I want to build some WC cables of equal length. Thje intital run from my
> > master clock to the distro module is 4 meters so the remaining 9 cables
I
> > need to build (8 more WC cables and one AES cable) will need to be 4
meters
> > also. I can't afford the premade Zoalla or Apogee stuff. I'm looking for
raw
> > 75 ohm (and 110 ohm) cable of the highest quality I can afford with the
best
> > connectors I can afford. I don't want my square waves even thinking
about
> > turning into triangle waves due to high capacitance.
> >
> > I know Canare is good stuff. I have some 110 ohm Mogami here. What would
> > youse guys suggest for the lowest capacitance?
> >
> > Thanks,
> >
> > Deej
> >
> >

Report message to a moderator

Previous Topic:	For_UAD1_Users...Maybe_Worthless_Post
Next Topic:	Re-Amping/Sans-amping a bass track

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Mar 21 15:16:34 PDT 2025

Total time taken to generate the page: 0.00901 seconds