The PARIS Forums: PARIS: Main » Anyone besides Dimitrios ever use a Sync Plate with Paris?

Home » The PARIS Forums » PARIS: Main » Anyone besides Dimitrios ever use a Sync Plate with Paris?

Show: Today's Messages :: Polls :: Message Navigator

Anyone besides Dimitrios ever use a Sync Plate with Paris? [message #99465]

Tue, 08 July 2008 22:26

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

I thought that Aaron and maybe one other person had used
this hardware in this group. I am hoping to achieve sample
accurate sync using Paris as a master to Cubase 4.2 using
a Scope Pro card with an attached Sync Plate. All
of this needs to happen in XP on one computer. The
comp is the least of my worries.

Dimitrios says it can be done but we're having trouble
communicating. Maybe to this thread he will be able to?

Does XP rule this out or does Dimitrios know something
that will work? I thought the ADAT sync ports on a MEC adat
module were a no go in XP. I've never tried them to date.
I understand that Sync Plate/Scope and Cubase 4.2 both support
ASIO positioning protocol. The Sync Plate has WC in/out and
ADAT sync 9 pin in/out.

Any info you can give me may help. I'd like to snag a Sync Plate
before my comp comes if it's an achievable goal.

Thanks,
Tom

Report message to a moderator

Re: Anyone besides Dimitrios ever use a Sync Plate with Paris? [message #99466 is a reply to message #99465]

Tue, 08 July 2008 22:42

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

Sorry man, I have 3 Scope cards but opted out on the sync plate. I use a
combo of SMPTE/MTC and Adat lightpipe sync to do so.

AA

"Tom Bruhl" <arpegio@comcast.net> wrote in message news:48744e02$1@linux...
>I thought that Aaron and maybe one other person had used
> this hardware in this group. I am hoping to achieve sample
> accurate sync using Paris as a master to Cubase 4.2 using
> a Scope Pro card with an attached Sync Plate. All
> of this needs to happen in XP on one computer. The
> comp is the least of my worries.
>
> Dimitrios says it can be done but we're having trouble
> communicating. Maybe to this thread he will be able to?
>
> Does XP rule this out or does Dimitrios know something
> that will work? I thought the ADAT sync ports on a MEC adat
> module were a no go in XP. I've never tried them to date.
> I understand that Sync Plate/Scope and Cubase 4.2 both support
> ASIO positioning protocol. The Sync Plate has WC in/out and
> ADAT sync 9 pin in/out.
>
> Any info you can give me may help. I'd like to snag a Sync Plate
> before my comp comes if it's an achievable goal.
>
> Thanks,
> Tom
>
>
>
>

Report message to a moderator

Re: Anyone besides Dimitrios ever use a Sync Plate with Paris? [message #99467 is a reply to message #99466]

Tue, 08 July 2008 22:58

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

Aaron,

So lightpipe is enough to keep the timing sample accurate?

I'm doing that now with SMPTE to MTC and adat lightpipe.
I doubt that it is that tight though.

Tom

"Aaron Allen" <know-spam@not_here.dude> wrote in message
news:487451cd@linux...
> Sorry man, I have 3 Scope cards but opted out on the sync plate. I use a
> combo of SMPTE/MTC and Adat lightpipe sync to do so.
>
> AA
>
>
> "Tom Bruhl" <arpegio@comcast.net> wrote in message
> news:48744e02$1@linux...
>>I thought that Aaron and maybe one other person had used
>> this hardware in this group. I am hoping to achieve sample
>> accurate sync using Paris as a master to Cubase 4.2 using
>> a Scope Pro card with an attached Sync Plate. All
>> of this needs to happen in XP on one computer. The
>> comp is the least of my worries.
>>
>> Dimitrios says it can be done but we're having trouble
>> communicating. Maybe to this thread he will be able to?
>>
>> Does XP rule this out or does Dimitrios know something
>> that will work? I thought the ADAT sync ports on a MEC adat
>> module were a no go in XP. I've never tried them to date.
>> I understand that Sync Plate/Scope and Cubase 4.2 both support
>> ASIO positioning protocol. The Sync Plate has WC in/out and
>> ADAT sync 9 pin in/out.
>>
>> Any info you can give me may help. I'd like to snag a Sync Plate
>> before my comp comes if it's an achievable goal.
>>
>> Thanks,
>> Tom
>>
>>
>>
>>
>
>

Report message to a moderator

Re: Anyone besides Dimitrios ever use a Sync Plate with Paris? [message #99468 is a reply to message #99467]

Tue, 08 July 2008 23:39

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

it's not sample accurate, but it's fine for what I'm doing with it.. which
is to dump prebuilt synth stuff. Odd as it may seem, I find that I actually
like the slop brought on my synth/sequencer parts. More human and random.

AA

"Tom Bruhl" <arpegio@comcast.net> wrote in message news:4874557f$1@linux...
> Aaron,
>
> So lightpipe is enough to keep the timing sample accurate?
>
> I'm doing that now with SMPTE to MTC and adat lightpipe.
> I doubt that it is that tight though.
>
> Tom
>
>
>
>
> "Aaron Allen" <know-spam@not_here.dude> wrote in message
> news:487451cd@linux...
>> Sorry man, I have 3 Scope cards but opted out on the sync plate. I use a
>> combo of SMPTE/MTC and Adat lightpipe sync to do so.
>>
>> AA
>>
>>
>> "Tom Bruhl" <arpegio@comcast.net> wrote in message
>> news:48744e02$1@linux...
>>>I thought that Aaron and maybe one other person had used
>>> this hardware in this group. I am hoping to achieve sample
>>> accurate sync using Paris as a master to Cubase 4.2 using
>>> a Scope Pro card with an attached Sync Plate. All
>>> of this needs to happen in XP on one computer. The
>>> comp is the least of my worries.
>>>
>>> Dimitrios says it can be done but we're having trouble
>>> communicating. Maybe to this thread he will be able to?
>>>
>>> Does XP rule this out or does Dimitrios know something
>>> that will work? I thought the ADAT sync ports on a MEC adat
>>> module were a no go in XP. I've never tried them to date.
>>> I understand that Sync Plate/Scope and Cubase 4.2 both support
>>> ASIO positioning protocol. The Sync Plate has WC in/out and
>>> ADAT sync 9 pin in/out.
>>>
>>> Any info you can give me may help. I'd like to snag a Sync Plate
>>> before my comp comes if it's an achievable goal.
>>>
>>> Thanks,
>>> Tom
>>>
>>>
>>>
>>>
>>
>>
>
>

Report message to a moderator

Re: Anyone besides Dimitrios ever use a Sync Plate with Paris? [message #99469 is a reply to message #99468]

Tue, 08 July 2008 23:52

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

Aaron,

I hear ya there. I've been doing it like that since 1991 with my Amiga.
SMPTE has been good enough and stable as can be.

I am just trying to prepare for the future with Cubase and Scope becoming
the mothership.

Thanks for the info.

Tom

"Aaron Allen" <know-spam@not_here.dude> wrote in message
news:48745f2d@linux...
> it's not sample accurate, but it's fine for what I'm doing with it.. which
> is to dump prebuilt synth stuff. Odd as it may seem, I find that I
> actually like the slop brought on my synth/sequencer parts. More human
> and random.
>
> AA
>
> "Tom Bruhl" <arpegio@comcast.net> wrote in message
> news:4874557f$1@linux...
>> Aaron,
>>
>> So lightpipe is enough to keep the timing sample accurate?
>>
>> I'm doing that now with SMPTE to MTC and adat lightpipe.
>> I doubt that it is that tight though.
>>
>> Tom
>>
>>
>>
>>
>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>> news:487451cd@linux...
>>> Sorry man, I have 3 Scope cards but opted out on the sync plate. I use a
>>> combo of SMPTE/MTC and Adat lightpipe sync to do so.
>>>
>>> AA
>>>
>>>
>>> "Tom Bruhl" <arpegio@comcast.net> wrote in message
>>> news:48744e02$1@linux...
>>>>I thought that Aaron and maybe one other person had used
>>>> this hardware in this group. I am hoping to achieve sample
>>>> accurate sync using Paris as a master to Cubase 4.2 using
>>>> a Scope Pro card with an attached Sync Plate. All
>>>> of this needs to happen in XP on one computer. The
>>>> comp is the least of my worries.
>>>>
>>>> Dimitrios says it can be done but we're having trouble
>>>> communicating. Maybe to this thread he will be able to?
>>>>
>>>> Does XP rule this out or does Dimitrios know something
>>>> that will work? I thought the ADAT sync ports on a MEC adat
>>>> module were a no go in XP. I've never tried them to date.
>>>> I understand that Sync Plate/Scope and Cubase 4.2 both support
>>>> ASIO positioning protocol. The Sync Plate has WC in/out and
>>>> ADAT sync 9 pin in/out.
>>>>
>>>> Any info you can give me may help. I'd like to snag a Sync Plate
>>>> before my comp comes if it's an achievable goal.
>>>>
>>>> Thanks,
>>>> Tom
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Report message to a moderator

Re: Anyone besides Dimitrios ever use a Sync Plate with Paris? [message #99472 is a reply to message #99469]

Thu, 10 July 2008 19:43

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

Aaron,

Turns out Dimitrios says this is going to work so I'm
picking up a Sync Plate and try it. Chris Ludwig says
the quadcore this is going in is also going to be overclocked
from 2.6- 3.2 . Oh boy!

Can't wait.

Tom

"Tom Bruhl" <arpegio@comcast.net> wrote in message news:4874624e$1@linux...
> Aaron,
>
> I hear ya there. I've been doing it like that since 1991 with my Amiga.
> SMPTE has been good enough and stable as can be.
>
> I am just trying to prepare for the future with Cubase and Scope becoming
> the mothership.
>
> Thanks for the info.
>
> Tom
>
>
>
> "Aaron Allen" <know-spam@not_here.dude> wrote in message
> news:48745f2d@linux...
>> it's not sample accurate, but it's fine for what I'm doing with it..
>> which is to dump prebuilt synth stuff. Odd as it may seem, I find that I
>> actually like the slop brought on my synth/sequencer parts. More human
>> and random.
>>
>> AA
>>
>> "Tom Bruhl" <arpegio@comcast.net> wrote in message
>> news:4874557f$1@linux...
>>> Aaron,
>>>
>>> So lightpipe is enough to keep the timing sample accurate?
>>>
>>> I'm doing that now with SMPTE to MTC and adat lightpipe.
>>> I doubt that it is that tight though.
>>>
>>> Tom
>>>
>>>
>>>
>>>
>>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>>> news:487451cd@linux...
>>>> Sorry man, I have 3 Scope cards but opted out on the sync plate. I use
>>>> a combo of SMPTE/MTC and Adat lightpipe sync to do so.
>>>>
>>>> AA
>>>>
>>>>
>>>> "Tom Bruhl" <arpegio@comcast.net> wrote in message
>>>> news:48744e02$1@linux...
>>>>>I thought that Aaron and maybe one other person had used
>>>>> this hardware in this group. I am hoping to achieve sample
>>>>> accurate sync using Paris as a master to Cubase 4.2 using
>>>>> a Scope Pro card with an attached Sync Plate. All
>>>>> of this needs to happen in XP on one computer. The
>>>>> comp is the least of my worries.
>>>>>
>>>>> Dimitrios says it can be done but we're having trouble
>>>>> communicating. Maybe to this thread he will be able to?
>>>>>
>>>>> Does XP rule this out or does Dimitrios know something
>>>>> that will work? I thought the ADAT sync ports on a MEC adat
>>>>> module were a no go in XP. I've never tried them to date.
>>>>> I understand that Sync Plate/Scope and Cubase 4.2 both support
>>>>> ASIO positioning protocol. The Sync Plate has WC in/out and
>>>>> ADAT sync 9 pin in/out.
>>>>>
>>>>> Any info you can give me may help. I'd like to snag a Sync Plate
>>>>> before my comp comes if it's an achievable goal.
>>>>>
>>>>> Thanks,
>>>>> Tom
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Report message to a moderator

Re: Anyone besides Dimitrios ever use a Sync Plate with Paris? [message #99478 is a reply to message #99465]

Sat, 12 July 2008 16:03

Deej [5]
Messages: 373
Registered: March 2008

Senior Member

"Tom Bruhl" <arpegio@comcast.net> wrote:
>I thought that Aaron and maybe one other person had used
>this hardware in this group. I am hoping to achieve sample
>accurate sync using Paris as a master to Cubase 4.2 using
>a Scope Pro card with an attached Sync Plate. All
>of this needs to happen in XP on one computer. The
>comp is the least of my worries.

I used the Creamware syncplate to slave Cubase to Paris. It should work just
fine. Just run a serial cable from the Paris ADAT sync port out to the sync
plate sync port input, set the Creamware hardware to ADAT sync and you should
be good to go as long as there's no other wierd voodoo going on between Cubase
and Paris and Paris and Cubase and the proprietary drives of two different
DSP platforms and multiple core CPU's and Paris on Windows XP........???

When I did it I was running two different DAWs and Paris was running on Win
ME.

Deej
>Dimitrios says it can be done but we're having trouble
>communicating. Maybe to this thread he will be able to?
>
>Does XP rule this out or does Dimitrios know something
>that will work? I thought the ADAT sync ports on a MEC adat
>module were a no go in XP. I've never tried them to date.
>I understand that Sync Plate/Scope and Cubase 4.2 both support
>ASIO positioning protocol. The Sync Plate has WC in/out and
>ADAT sync 9 pin in/out.
>
>Any info you can give me may help. I'd like to snag a Sync Plate
>before my comp comes if it's an achievable goal.
>
>Thanks,
>Tom
>
>
>
>

Report message to a moderator

Re: Anyone besides Dimitrios ever use a Sync Plate with Paris? [message #99482 is a reply to message #99478]

Sun, 13 July 2008 07:06

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

Deej,

Ya, ME is not me. This will be XP.
Dimitrios still says it works. I can say that it most
definitely does not work with an ADAT machine.

I'm on the fence because it's not mandatory with the way
I work to be sample accurate. Someday maybe though.

Thanks for your input.

Tom

"Deej" <noway@jose.net> wrote in message news:48793850$1@linux...
>
> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>I thought that Aaron and maybe one other person had used
>>this hardware in this group. I am hoping to achieve sample
>>accurate sync using Paris as a master to Cubase 4.2 using
>>a Scope Pro card with an attached Sync Plate. All
>>of this needs to happen in XP on one computer. The
>>comp is the least of my worries.
>
> I used the Creamware syncplate to slave Cubase to Paris. It should work
> just
> fine. Just run a serial cable from the Paris ADAT sync port out to the
> sync
> plate sync port input, set the Creamware hardware to ADAT sync and you
> should
> be good to go as long as there's no other wierd voodoo going on between
> Cubase
> and Paris and Paris and Cubase and the proprietary drives of two different
> DSP platforms and multiple core CPU's and Paris on Windows XP........???
>
> When I did it I was running two different DAWs and Paris was running on
> Win
> ME.
>
> Deej
>>Dimitrios says it can be done but we're having trouble
>>communicating. Maybe to this thread he will be able to?
>>
>>Does XP rule this out or does Dimitrios know something
>>that will work? I thought the ADAT sync ports on a MEC adat
>>module were a no go in XP. I've never tried them to date.
>>I understand that Sync Plate/Scope and Cubase 4.2 both support
>>ASIO positioning protocol. The Sync Plate has WC in/out and
>>ADAT sync 9 pin in/out.
>>
>>Any info you can give me may help. I'd like to snag a Sync Plate
>>before my comp comes if it's an achievable goal.
>>
>>Thanks,
>>Tom
>>
>>
>>
>>
>

Report message to a moderator

Re: Anyone besides Dimitrios ever use a Sync Plate with Paris? [message #99498 is a reply to message #99482]

Sun, 13 July 2008 19:42

Chris Ludwig

Messages: 868
Registered: May 2006

Senior Member

HI Tom,
Who knows maybe it will work with both Paris and the EDS hardware being
forced to run on a single CPU. makes the C16 work.

Chris

Tom Bruhl wrote:
> Deej,
>
> Ya, ME is not me. This will be XP.
> Dimitrios still says it works. I can say that it most
> definitely does not work with an ADAT machine.
>
> I'm on the fence because it's not mandatory with the way
> I work to be sample accurate. Someday maybe though.
>
> Thanks for your input.
>
> Tom
>
>
> "Deej" <noway@jose.net> wrote in message news:48793850$1@linux...
>
>> "Tom Bruhl" <arpegio@comcast.net> wrote:
>>
>>> I thought that Aaron and maybe one other person had used
>>> this hardware in this group. I am hoping to achieve sample
>>> accurate sync using Paris as a master to Cubase 4.2 using
>>> a Scope Pro card with an attached Sync Plate. All
>>> of this needs to happen in XP on one computer. The
>>> comp is the least of my worries.
>>>
>> I used the Creamware syncplate to slave Cubase to Paris. It should work
>> just
>> fine. Just run a serial cable from the Paris ADAT sync port out to the
>> sync
>> plate sync port input, set the Creamware hardware to ADAT sync and you
>> should
>> be good to go as long as there's no other wierd voodoo going on between
>> Cubase
>> and Paris and Paris and Cubase and the proprietary drives of two different
>> DSP platforms and multiple core CPU's and Paris on Windows XP........???
>>
>> When I did it I was running two different DAWs and Paris was running on
>> Win
>> ME.
>>
>> Deej
>>
>>> Dimitrios says it can be done but we're having trouble
>>> communicating. Maybe to this thread he will be able to?
>>>
>>> Does XP rule this out or does Dimitrios know something
>>> that will work? I thought the ADAT sync ports on a MEC adat
>>> module were a no go in XP. I've never tried them to date.
>>> I understand that Sync Plate/Scope and Cubase 4.2 both support
>>> ASIO positioning protocol. The Sync Plate has WC in/out and
>>> ADAT sync 9 pin in/out.
>>>
>>> Any info you can give me may help. I'd like to snag a Sync Plate
>>> before my comp comes if it's an achievable goal.
>>>
>>> Thanks,
>>> Tom
>>>
>>>
>>>
>>>
>>>
>
>
>

--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762

Report message to a moderator

Previous Topic:	reverb comparisons
Next Topic:	Is there a Mac alternative to Gigastudio....

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Feb 03 07:25:59 PST 2025

Total time taken to generate the page: 0.02485 seconds