| Emulating classic funk/soul key sounds using guitar amps... [message #58971] |
Tue, 11 October 2005 02:23  |
Kim
Messages: 1246
Registered: October 2005
|
Senior Member |
|
|
aged to have a DX reverb on aux buss inside Paris WHICH CAN BE
ACROSS SUBMIXES !
Only a small delay of 12 samples plus 2 samples after that for additional
eds cards.
That is no problem at all.
Afterall you need predelay almost everytime with a reverb.
If you struggle for no predelay just put your precious audio tracks on first
submix.
Regards,
Dimitrios
On tracks 15 and 16 on EDS card (assuming you have one) .Now we all not have UAD or Powercore cards.
Maybe some of us who have don't think that they sound exceptional
Also some may think that certain DX or VST compressors sound almost as good
( I do !)
So,
We put EDSTransfer=8,16 on top of Paris.cfg
We use Spinaudiolite FREE (see previous psot for link) to wrap senderella.
We wrap VST effects (compressors here) with FXpansion 3.3 no need to buy
newone.
We put senderella configured as send (default anyway) we put around 50% of
volume (that is to prevent buffer clipping inside senderella) and we
REDIRECT the sound on bottom of senderella.
We put senderella as a send on each of the tracks we want to use
compression.
Say we have a kick snare OH's maybe your room mics too...
So on all that tracks we put senderella as above.
NOW
On tracks 15 and 16 you load your EMPTY 16 bit paf file of a lenght equal or
bigger than your actual song.
On first Native slot you put senderella (spinaudiolite wrapped) on track 15
as MONO instance senderella( chanelled as 1) and on Track 16 senderella
(channeled as 2)
This is to preserve THE STEREO IMAGE of the stereo return compression
feeding !!
NOW you open on next native slot you open as stereo your FREE beloved VST
compressor like from the ones I have sent to some of you (mine are TL's
Saturated driver , classic compressor,E-ponic xpressor, Mda dynamics, Gene
compressor, DB compressor on second slot ( I will gladly email all free and
nice compressors if asked to) from your free FXpansion 3.3 wrapper.
Yes you don't need any other wrapper because FXpansion introduces NO LATENCY
on DX/VST plugins
NOW you should be hearing your compressor return on tracks 15 and 16 and you
can check the NO LATENCY with just having a dry signal on compressor's
return and flip the polarity.
So we managed to have a VST STEREO compressor on aux buss inside Paris.
Regards,
DimitriosFor stereo reverb sending you do the following.
You use two instances of senderella (wrapped with SpinaudioLite)
You see Senderella uses 64 channels inside of it for busses !
You use here only 1 and 2
You put on every audio track you wanna send to reverb on first Native slot
Senderella channelized as 1
and one second slot channelized as 2
Then on Track 15 you put senderella as MONO cahnnelized as 1 configured as
return
On track 16 you put senderella again channelized as 2 as MONO again
configured as return.
THEN
On track 15 you put as STEREO your favourite DX reverb either right away or
wrapped from FXpansion 3.3
Now when you raise volume on senderella1 it goes left to the reverb send and
raising sender
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
