The PARIS Forums: PARIS: Main » Using EDS compressor for whole drummix in Paris !

Home » The PARIS Forums » PARIS: Main » Using EDS compressor for whole drummix in Paris !

Show: Today's Messages :: Polls :: Message Navigator

Using EDS compressor for whole drummix in Paris ! [message #78019]

Sun, 07 January 2007 04:03

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

I would like to post the alternative to bus compressing using Paris eds compressor.
I combined some users tips here...
You use aux 1 as a stereo feed to eds stereo compressor.
You use the aux as pre and mute every drumtrack.
Now using the aux pan pot you send the drumtracks to the stereo field as
needed.
You open a eds compressor with 1.20 ratio 8 (yes only 8) release attack about
12 o'clock predelay 3 (if you want you can nudge all drumtracks 3 ms to the
left) threshold -96 and output like 4-5 db.
Now these will be the compressed only drums.
Now on aux 2 stereo again pre again yiou use the same aux settings and you
put on aux 2 same eds compressor with same predelay BUT with no threshold
and no ratio as to have the dry only signal.
Thus with aux1 you control the compressed drummix only and with aux2 the
dry drums.
Happy new Year.
Dimitrios

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78027 is a reply to message #78019]

Sun, 07 January 2007 15:46

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

This is a multi-part message in MIME format.

------=_NextPart_000_0014_01C7328C.299F3B60
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Duh? Why didn't I think of that?!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Damn you're good Dimitrios.
Tom

"Dimitrios" <musurgio@otenet.gr> wrote in message =
news:45a0d36c$1@linux...

I would like to post the alternative to bus compressing using Paris =
eds compressor.
I combined some users tips here...
You use aux 1 as a stereo feed to eds stereo compressor.
You use the aux as pre and mute every drumtrack.
Now using the aux pan pot you send the drumtracks to the stereo field =
as
needed.
You open a eds compressor with 1.20 ratio 8 (yes only 8) release =
attack about
12 o'clock predelay 3 (if you want you can nudge all drumtracks 3 ms =
to the
left) threshold -96 and output like 4-5 db.
Now these will be the compressed only drums.
Now on aux 2 stereo again pre again yiou use the same aux settings and =
you
put on aux 2 same eds compressor with same predelay BUT with no =
threshold
and no ratio as to have the dry only signal.
Thus with aux1 you control the compressed drummix only and with aux2 =
the
dry drums.
Happy new Year.
Dimitrios

I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0014_01C7328C.299F3B60
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Duh?  Why didn't I think of=20
that?!!!!!!!!!!!!!!!!!!!!!!!!!!!!!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Damn you're good =
Dimitrios.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Dimitrios" <<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote in =
message=20
<A =
href=3D"news:45a0d36c$1@linux">news:45a0d36c$1@linux</A>...</DIV><BR>I =
would=20
like to post the alternative to bus compressing using Paris eds=20
compressor.<BR>I combined some users tips here...<BR>You use aux 1 as =
a stereo=20
feed to eds stereo compressor.<BR>You use the aux as pre and mute =
every=20
drumtrack.<BR>Now using the aux pan pot you send the drumtracks to the =
stereo=20
field as<BR>needed.<BR>You open a eds compressor with 1.20 ratio 8 =
(yes only=20
8) release attack about<BR>12 o'clock predelay 3 (if you want you can =
nudge=20
all drumtracks 3 ms to the<BR>left) threshold -96 and output like 4-5=20
db.<BR>Now these will be the compressed only drums.<BR>Now on aux 2 =
stereo=20
again pre again yiou use the same aux settings and you<BR>put on aux 2 =
same=20
eds compressor with same predelay BUT with no threshold<BR>and no =
ratio as to=20
have the dry only signal.<BR>Thus with aux1 you control the compressed =
drummix=20
only and with aux2 the<BR>dry drums.<BR>Happy new=20
Year.<BR>Dimitrios</BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>   </FONT></DIV></BODY ></HTML>

------=_NextPart_000_0014_01C7328C.299F3B60--

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78030 is a reply to message #78019]

Sun, 07 January 2007 17:25

Rod Lincoln
Messages: 883
Registered: September 2005

Senior Member

D...that sounds like a great idea. Thanks
Rod
"Dimitrios" <musurgio@otenet.gr> wrote:
>
>I would like to post the alternative to bus compressing using Paris eds
compressor.
>I combined some users tips here...
>You use aux 1 as a stereo feed to eds stereo compressor.
>You use the aux as pre and mute every drumtrack.
>Now using the aux pan pot you send the drumtracks to the stereo field as
>needed.
>You open a eds compressor with 1.20 ratio 8 (yes only 8) release attack
about
>12 o'clock predelay 3 (if you want you can nudge all drumtracks 3 ms to
the
>left) threshold -96 and output like 4-5 db.
>Now these will be the compressed only drums.
>Now on aux 2 stereo again pre again yiou use the same aux settings and you
>put on aux 2 same eds compressor with same predelay BUT with no threshold
>and no ratio as to have the dry only signal.
>Thus with aux1 you control the compressed drummix only and with aux2 the
>dry drums.
>Happy new Year.
>Dimitrios

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78031 is a reply to message #78019]

Sun, 07 January 2007 17:41

brandon[2]
Messages: 380
Registered: June 2006

Senior Member

How do you control the level of eachindividual instrument?
With the send pot on the channel?

B

"Dimitrios" <musurgio@otenet.gr> wrote:
>
>I would like to post the alternative to bus compressing using Paris eds
compressor.
>I combined some users tips here...
>You use aux 1 as a stereo feed to eds stereo compressor.
>You use the aux as pre and mute every drumtrack.
>Now using the aux pan pot you send the drumtracks to the stereo field as
>needed.
>You open a eds compressor with 1.20 ratio 8 (yes only 8) release attack
about
>12 o'clock predelay 3 (if you want you can nudge all drumtracks 3 ms to
the
>left) threshold -96 and output like 4-5 db.
>Now these will be the compressed only drums.
>Now on aux 2 stereo again pre again yiou use the same aux settings and you
>put on aux 2 same eds compressor with same predelay BUT with no threshold
>and no ratio as to have the dry only signal.
>Thus with aux1 you control the compressed drummix only and with aux2 the
>dry drums.
>Happy new Year.
>Dimitrios

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78040 is a reply to message #78031]

Sun, 07 January 2007 23:38

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Glad you like it...
Yes the aux 1 send is your indivindual drum level for compressed (squashed)
drums and aux2 for dry.
The latency is the same so no phasing here !
There is 2 samples just for using aux and eds compressor gets loaded twice
so no difference in latency here at all.
Regards,
Dimitrios
"Brandon" <a@a.com> wrote:
>
>How do you control the level of eachindividual instrument?
>With the send pot on the channel?
>
>B
>
>"Dimitrios" <musurgio@otenet.gr> wrote:
>>
>>I would like to post the alternative to bus compressing using Paris eds
>compressor.
>>I combined some users tips here...
>>You use aux 1 as a stereo feed to eds stereo compressor.
>>You use the aux as pre and mute every drumtrack.
>>Now using the aux pan pot you send the drumtracks to the stereo field as
>>needed.
>>You open a eds compressor with 1.20 ratio 8 (yes only 8) release attack
>about
>>12 o'clock predelay 3 (if you want you can nudge all drumtracks 3 ms to
>the
>>left) threshold -96 and output like 4-5 db.
>>Now these will be the compressed only drums.
>>Now on aux 2 stereo again pre again yiou use the same aux settings and
you
>>put on aux 2 same eds compressor with same predelay BUT with no threshold
>>and no ratio as to have the dry only signal.
>>Thus with aux1 you control the compressed drummix only and with aux2 the
>>dry drums.
>>Happy new Year.
>>Dimitrios
>

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78071 is a reply to message #78019]

Tue, 09 January 2007 04:42

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

Thanks Dimitrious

"Dimitrios" <musurgio@otenet.gr> wrote in message news:45a0d36c$1@linux...
>
> I would like to post the alternative to bus compressing using Paris eds
> compressor.
> I combined some users tips here...
> You use aux 1 as a stereo feed to eds stereo compressor.
> You use the aux as pre and mute every drumtrack.
> Now using the aux pan pot you send the drumtracks to the stereo field as
> needed.
> You open a eds compressor with 1.20 ratio 8 (yes only 8) release attack
> about
> 12 o'clock predelay 3 (if you want you can nudge all drumtracks 3 ms to
> the
> left) threshold -96 and output like 4-5 db.
> Now these will be the compressed only drums.
> Now on aux 2 stereo again pre again yiou use the same aux settings and you
> put on aux 2 same eds compressor with same predelay BUT with no threshold
> and no ratio as to have the dry only signal.
> Thus with aux1 you control the compressed drummix only and with aux2 the
> dry drums.
> Happy new Year.
> Dimitrios

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78072 is a reply to message #78071]

Tue, 09 January 2007 06:03

brandon[2]

Messages: 380
Registered: June 2006

Senior Member

When you say 8 release....
You mean:?
8.
..8
..08
..008
..0008
??????????

--
Thanks,

Brandon

"Don Nafe" <dnafe@magma.ca> wrote in message news:45a38aec@linux...
> Thanks Dimitrious
>
>
> "Dimitrios" <musurgio@otenet.gr> wrote in message news:45a0d36c$1@linux...
> >
> > I would like to post the alternative to bus compressing using Paris eds
> > compressor.
> > I combined some users tips here...
> > You use aux 1 as a stereo feed to eds stereo compressor.
> > You use the aux as pre and mute every drumtrack.
> > Now using the aux pan pot you send the drumtracks to the stereo field as
> > needed.
> > You open a eds compressor with 1.20 ratio 8 (yes only 8) release attack
> > about
> > 12 o'clock predelay 3 (if you want you can nudge all drumtracks 3 ms to
> > the
> > left) threshold -96 and output like 4-5 db.
> > Now these will be the compressed only drums.
> > Now on aux 2 stereo again pre again yiou use the same aux settings and
you
> > put on aux 2 same eds compressor with same predelay BUT with no
threshold
> > and no ratio as to have the dry only signal.
> > Thus with aux1 you control the compressed drummix only and with aux2 the
> > dry drums.
> > Happy new Year.
> > Dimitrios
>
>

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78073 is a reply to message #78072]

Tue, 09 January 2007 07:51

John Macy
Messages: 242
Registered: April 2006

Senior Member

eight to the bar?

"Brandon" <a@a.com> wrote:
>When you say 8 release....
>You mean:?
>8.
>.8
>.08
>.008
>.0008
>??????????
>
>--
>Thanks,
>
>Brandon
>
>
>
>
>"Don Nafe" <dnafe@magma.ca> wrote in message news:45a38aec@linux...
>> Thanks Dimitrious
>>
>>
>> "Dimitrios" <musurgio@otenet.gr> wrote in message news:45a0d36c$1@linux...
>> >
>> > I would like to post the alternative to bus compressing using Paris
eds
>> > compressor.
>> > I combined some users tips here...
>> > You use aux 1 as a stereo feed to eds stereo compressor.
>> > You use the aux as pre and mute every drumtrack.
>> > Now using the aux pan pot you send the drumtracks to the stereo field
as
>> > needed.
>> > You open a eds compressor with 1.20 ratio 8 (yes only 8) release attack
>> > about
>> > 12 o'clock predelay 3 (if you want you can nudge all drumtracks 3 ms
to
>> > the
>> > left) threshold -96 and output like 4-5 db.
>> > Now these will be the compressed only drums.
>> > Now on aux 2 stereo again pre again yiou use the same aux settings and
>you
>> > put on aux 2 same eds compressor with same predelay BUT with no
>threshold
>> > and no ratio as to have the dry only signal.
>> > Thus with aux1 you control the compressed drummix only and with aux2
the
>> > dry drums.
>> > Happy new Year.
>> > Dimitrios
>>
>>
>
>

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78078 is a reply to message #78072]

Tue, 09 January 2007 11:57

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

The smallest...
0.00008 whatever it is...
:)
Glad you like this drumsubmix compressing thing...
REgards,
Dimitrios

"Brandon" <a@a.com> wrote:
>When you say 8 release....
>You mean:?
>8.
>.8
>.08
>.008
>.0008
>??????????
>
>--
>Thanks,
>
>Brandon
>
>
>
>
>"Don Nafe" <dnafe@magma.ca> wrote in message news:45a38aec@linux...
>> Thanks Dimitrious
>>
>>
>> "Dimitrios" <musurgio@otenet.gr> wrote in message news:45a0d36c$1@linux...
>> >
>> > I would like to post the alternative to bus compressing using Paris
eds
>> > compressor.
>> > I combined some users tips here...
>> > You use aux 1 as a stereo feed to eds stereo compressor.
>> > You use the aux as pre and mute every drumtrack.
>> > Now using the aux pan pot you send the drumtracks to the stereo field
as
>> > needed.
>> > You open a eds compressor with 1.20 ratio 8 (yes only 8) release attack
>> > about
>> > 12 o'clock predelay 3 (if you want you can nudge all drumtracks 3 ms
to
>> > the
>> > left) threshold -96 and output like 4-5 db.
>> > Now these will be the compressed only drums.
>> > Now on aux 2 stereo again pre again yiou use the same aux settings and
>you
>> > put on aux 2 same eds compressor with same predelay BUT with no
>threshold
>> > and no ratio as to have the dry only signal.
>> > Thus with aux1 you control the compressed drummix only and with aux2
the
>> > dry drums.
>> > Happy new Year.
>> > Dimitrios
>>
>>
>
>

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78113 is a reply to message #78078]

Tue, 09 January 2007 21:10

Tom Bruhl

Messages: 1368
Registered: June 2007

Senior Member

This is a multi-part message in MIME format.

------=_NextPart_000_0356_01C7344B.ABA5CD70
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Dimitrios it's simple it's silly. The only problem is we can't automate
using this type of routing. Sometimes that's necessary.
"dimitrios" <musurgio@otenet.gr> wrote in message =
news:45a3e5af$1@linux...

The smallest...
0.00008 whatever it is...
:)
Glad you like this drumsubmix compressing thing...
REgards,
Dimitrios

"Brandon" <a@a.com> wrote:
>When you say 8 release....
>You mean:?
>8.
>.8
>.08
>.008
>.0008
>??????????
>
>--=20
>Thanks,
>
>Brandon
>
>
>
>
>"Don Nafe" <dnafe@magma.ca> wrote in message news:45a38aec@linux...
>> Thanks Dimitrious
>>
>>
>> "Dimitrios" <musurgio@otenet.gr> wrote in message =
news:45a0d36c$1@linux...
>> >
>> > I would like to post the alternative to bus compressing using =
Paris
eds
>> > compressor.
>> > I combined some users tips here...
>> > You use aux 1 as a stereo feed to eds stereo compressor.
>> > You use the aux as pre and mute every drumtrack.
>> > Now using the aux pan pot you send the drumtracks to the stereo =
field
as
>> > needed.
>> > You open a eds compressor with 1.20 ratio 8 (yes only 8) release =
attack
>> > about
>> > 12 o'clock predelay 3 (if you want you can nudge all drumtracks 3 =
ms
to
>> > the
>> > left) threshold -96 and output like 4-5 db.
>> > Now these will be the compressed only drums.
>> > Now on aux 2 stereo again pre again yiou use the same aux =
settings and
>you
>> > put on aux 2 same eds compressor with same predelay BUT with no
>threshold
>> > and no ratio as to have the dry only signal.
>> > Thus with aux1 you control the compressed drummix only and with =
aux2
the
>> > dry drums.
>> > Happy new Year.
>> > Dimitrios
>>
>>
>
>

I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_0356_01C7344B.ABA5CD70
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Dimitrios it's simple it's silly.  =
The only=20
problem is we can't automate</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>using this type of routing.  =
Sometimes that's=20
necessary.</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"dimitrios" <<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote in =
message=20
<A =
href=3D"news:45a3e5af$1@linux">news:45a3e5af$1@linux</A>...</DIV><BR>The =

smallest...<BR>0.00008 whatever it is...<BR>:)<BR>Glad you like this=20
drumsubmix compressing =
thing...<BR>REgards,<BR>Dimitrios<BR><BR>"Brandon"=20
<<A href=3D"mailto:a@a.com">a@a.com</A>> wrote:<BR>>When you =
say 8=20
release....<BR>>You=20
=
mean:?<BR>>8.<BR>>.8<BR>>.08<BR>>.008 <BR>>.0008<BR>>???=
???????<BR>><BR>>--=20
=
<BR>>Thanks,<BR>><BR>>Brandon<BR>> <BR>><BR>><BR>><BR=
>>"Don=20
Nafe" <<A href=3D"mailto:dnafe@magma.ca">dnafe@magma.ca</A>> =
wrote in=20
message <A =
href=3D"news:45a38aec@linux">news:45a38aec@linux</A>...<BR>>>=20
Thanks Dimitrious<BR>>><BR>>><BR>>> "Dimitrios" =
<<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote in =
message=20
<A =
href=3D"news:45a0d36c$1@linux">news:45a0d36c$1@linux</A>...<BR>>>=20
><BR>>> > I would like to post the alternative to bus =
compressing=20
using Paris<BR>eds<BR>>> > compressor.<BR>>> > I =
combined=20
some users tips here...<BR>>> > You use aux 1 as a stereo =
feed to eds=20
stereo compressor.<BR>>> > You use the aux as pre and mute =
every=20
drumtrack.<BR>>> > Now using the aux pan pot you send the =
drumtracks=20
to the stereo field<BR>as<BR>>> > needed.<BR>>> > =
You open a=20
eds compressor with 1.20 ratio 8 (yes only 8) release =
attack<BR>>> >=20
about<BR>>> > 12 o'clock predelay 3 (if you want you can =
nudge all=20
drumtracks 3 ms<BR>to<BR>>> > the<BR>>> > left) =
threshold=20
-96 and output like 4-5 db.<BR>>> > Now these will be the =
compressed=20
only drums.<BR>>> > Now on aux 2 stereo again pre again yiou =
use the=20
same aux settings and<BR>>you<BR>>> > put on aux 2 same =
eds=20
compressor with same predelay BUT with no<BR>>threshold<BR>>> =
>=20
and no ratio as to have the dry only signal.<BR>>> > Thus =
with aux1=20
you control the compressed drummix only and with =
aux2<BR>the<BR>>> >=20
dry drums.<BR>>> > Happy new Year.<BR>>> >=20
Dimitrios<BR>>><BR>>><BR>> <BR>><BR></BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>   </FONT></DIV></BODY ></HTML>

------=_NextPart_000_0356_01C7344B.ABA5CD70--

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78117 is a reply to message #78113]

Tue, 09 January 2007 23:43

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Dear Tom,
Regarding automation what exactly would you like to automate in this situation
?
You cann always run a wire out from after the aux1 and wire in on a paris
channel and automate from there.
Same for aux2.
I never care about automation much...
Regards,
Dimitrios

"Tom Bruhl" <arpegio@comcast.net> wrote:
>
>
>Dimitrios it's simple it's silly. The only problem is we can't automate
>using this type of routing. Sometimes that's necessary.
> "dimitrios" <musurgio@otenet.gr> wrote in message =
>news:45a3e5af$1@linux...
>
> The smallest...
> 0.00008 whatever it is...
> :)
> Glad you like this drumsubmix compressing thing...
> REgards,
> Dimitrios
>
> "Brandon" <a@a.com> wrote:
> >When you say 8 release....
> >You mean:?
> >8.
> >.8
> >.08
> >.008
> >.0008
> >??????????
> >
> >--=20
> >Thanks,
> >
> >Brandon
> >
> >
> >
> >
> >"Don Nafe" <dnafe@magma.ca> wrote in message news:45a38aec@linux...
> >> Thanks Dimitrious
> >>
> >>
> >> "Dimitrios" <musurgio@otenet.gr> wrote in message =
>news:45a0d36c$1@linux...
> >> >
> >> > I would like to post the alternative to bus compressing using =
>Paris
> eds
> >> > compressor.
> >> > I combined some users tips here...
> >> > You use aux 1 as a stereo feed to eds stereo compressor.
> >> > You use the aux as pre and mute every drumtrack.
> >> > Now using the aux pan pot you send the drumtracks to the stereo =
>field
> as
> >> > needed.
> >> > You open a eds compressor with 1.20 ratio 8 (yes only 8) release
=
>attack
> >> > about
> >> > 12 o'clock predelay 3 (if you want you can nudge all drumtracks 3
=
>ms
> to
> >> > the
> >> > left) threshold -96 and output like 4-5 db.
> >> > Now these will be the compressed only drums.
> >> > Now on aux 2 stereo again pre again yiou use the same aux =
>settings and
> >you
> >> > put on aux 2 same eds compressor with same predelay BUT with no
> >threshold
> >> > and no ratio as to have the dry only signal.
> >> > Thus with aux1 you control the compressed drummix only and with =
>aux2
> the
> >> > dry drums.
> >> > Happy new Year.
> >> > Dimitrios
> >>
> >>
> >
> >
>
>
>
>I choose Polesoft Lockspam to fight spam, and you?
>http://www.polesoft.com/refer.html
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Dimitrios it's simple it's silly.� =
>The only=20
>problem is�we can't automate</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>using this type of routing.� =
>Sometimes that's=20
>necessary.</FONT></DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"dimitrios" <<A=20
> href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote in =
>message=20
> <A =
>href=3D"news:45a3e5af$1@linux">news:45a3e5af$1@linux</A>...</DIV><BR>The
=
>
> smallest...<BR>0.00008 whatever it is...<BR>:)<BR>Glad you like this=20
> drumsubmix compressing =
>thing...<BR>REgards,<BR>Dimitrios<BR><BR>"Brandon"=20
> <<A href=3D"mailto:a@a.com">a@a.com</A>> wrote:<BR>>When you =
>say 8=20
> release....<BR>>You=20
> =
>mean:?<BR>>8.<BR>>.8<BR>>.08<BR>>.008<BR>>.0008<BR >>???=
>???????<BR>><BR>>--=20
> =
><BR>>Thanks,<BR>><BR>>Brandon<BR>><BR>><BR>><BR>><BR=
>>>"Don=20
> Nafe" <<A href=3D"mailto:dnafe@magma.ca">dnafe@magma.ca</A>> =
>wrote in=20
> message <A =
>href=3D"news:45a38aec@linux">news:45a38aec@linux</A>...<BR>>>=20
> Thanks Dimitrious<BR>>><BR>>><BR>>> "Dimitrios" =
><<A=20
> href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote in =
>message=20
> <A =
>href=3D"news:45a0d36c$1@linux">news:45a0d36c$1@linux</A>...<BR>>>=20
> ><BR>>> > I would like to post the alternative to bus =
>compressing=20
> using Paris<BR>eds<BR>>> > compressor.<BR>>> > I =
>combined=20
> some users tips here...<BR>>> > You use aux 1 as a stereo =
>feed to eds=20
> stereo compressor.<BR>>> > You use the aux as pre and mute =
>every=20
> drumtrack.<BR>>> > Now using the aux pan pot you send the =
>drumtracks=20
> to the stereo field<BR>as<BR>>> > needed.<BR>>> > =
>You open a=20
> eds compressor with 1.20 ratio 8 (yes only 8) release =
>attack<BR>>> >=20
> about<BR>>> > 12 o'clock predelay 3 (if you want you can =
>nudge all=20
> drumtracks 3 ms<BR>to<BR>>> > the<BR>>> > left) =
>threshold=20
> -96 and output like 4-5 db.<BR>>> > Now these will be the =
>compressed=20
> only drums.<BR>>> > Now on aux 2 stereo again pre again yiou =
>use the=20
> same aux settings and<BR>>you<BR>>> > put on aux 2 same =
>eds=20
> compressor with same predelay BUT with no<BR>>threshold<BR>>> =
>>=20
> and no ratio as to have the dry only signal.<BR>>> > Thus =
>with aux1=20
> you control the compressed drummix only and with =
>aux2<BR>the<BR>>> >=20
> dry drums.<BR>>> > Happy new Year.<BR>>> >=20
> Dimitrios<BR>>><BR>>><BR>><BR>><BR></BLOCKQUOTE>
><DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
>and=20
>you?<BR><A=20
>href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
>.html</A>��</FONT></DIV></BODY></HTML>
>
>

Report message to a moderator

Re: Using EDS compressor for whole drummix in Paris ! [message #78174 is a reply to message #78113]

Wed, 10 January 2007 16:53

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

This is a multi-part message in MIME format.

------=_NextPart_000_00D2_01C734E8.95A516F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

actually, I think you can. visit analogx.com and look in the paris =
section. he has an applet there that will midi automate the mini mixer, =
but there are a few catches and I don't know for sure it runs with Ver =
3.0... my catch on this is the FX and how to get your EDS stuff =
happening using auxes to mix. You can do a surround mix also using =
auxes, it's just a pain.=20

AA

"Tom Bruhl" <arpegio@comcast.net> wrote in message =
news:45a472ae$1@linux...
Dimitrios it's simple it's silly. The only problem is we can't =
automate
using this type of routing. Sometimes that's necessary.
"dimitrios" <musurgio@otenet.gr> wrote in message =
news:45a3e5af$1@linux...

The smallest...
0.00008 whatever it is...
:)
Glad you like this drumsubmix compressing thing...
REgards,
Dimitrios

"Brandon" <a@a.com> wrote:
>When you say 8 release....
>You mean:?
>8.
>.8
>.08
>.008
>.0008
>??????????
>
>--=20
>Thanks,
>
>Brandon
>
>
>
>
>"Don Nafe" <dnafe@magma.ca> wrote in message news:45a38aec@linux...
>> Thanks Dimitrious
>>
>>
>> "Dimitrios" <musurgio@otenet.gr> wrote in message =
news:45a0d36c$1@linux...
>> >
>> > I would like to post the alternative to bus compressing using =
Paris
eds
>> > compressor.
>> > I combined some users tips here...
>> > You use aux 1 as a stereo feed to eds stereo compressor.
>> > You use the aux as pre and mute every drumtrack.
>> > Now using the aux pan pot you send the drumtracks to the stereo =
field
as
>> > needed.
>> > You open a eds compressor with 1.20 ratio 8 (yes only 8) =
release attack
>> > about
>> > 12 o'clock predelay 3 (if you want you can nudge all drumtracks =
3 ms
to
>> > the
>> > left) threshold -96 and output like 4-5 db.
>> > Now these will be the compressed only drums.
>> > Now on aux 2 stereo again pre again yiou use the same aux =
settings and
>you
>> > put on aux 2 same eds compressor with same predelay BUT with no
>threshold
>> > and no ratio as to have the dry only signal.
>> > Thus with aux1 you control the compressed drummix only and with =
aux2
the
>> > dry drums.
>> > Happy new Year.
>> > Dimitrios
>>
>>
>
>

I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
------=_NextPart_000_00D2_01C734E8.95A516F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.5730.11" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>actually, I think you can. visit =
analogx.com and=20
look in the paris section. he has an applet there that will midi =
automate the=20
mini mixer, but there are a few catches and I don't know for sure it =
runs with=20
Ver 3.0... my catch on this is the FX and how to get your EDS stuff =
happening=20
using auxes to mix.  You can do a surround mix also using auxes, =
it's just=20
a pain. </FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>AA</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Tom Bruhl" <<A=20
href=3D"mailto:arpegio@comcast.net">arpegio@comcast.net</A>> wrote =
in message=20
<A href=3D"news:45a472ae$1@linux">news:45a472ae$1@linux</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>Dimitrios it's simple it's =
silly.  The only=20
problem is we can't automate</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>using this type of routing.  =
Sometimes=20
that's necessary.</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"dimitrios" <<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote =
in message=20
<A =
href=3D"news:45a3e5af$1@linux">news:45a3e5af$1@linux</A>...</DIV><BR>The =

smallest...<BR>0.00008 whatever it is...<BR>:)<BR>Glad you like this =

drumsubmix compressing =
thing...<BR>REgards,<BR>Dimitrios<BR><BR>"Brandon"=20
<<A href=3D"mailto:a@a.com">a@a.com</A>> wrote:<BR>>When =
you say 8=20
release....<BR>>You=20
=
mean:?<BR>>8.<BR>>.8<BR>>.08<BR>>.008 <BR>>.0008<BR>>???=
???????<BR>><BR>>--=20
=
<BR>>Thanks,<BR>><BR>>Brandon<BR>> <BR>><BR>><BR>><BR=
>>"Don=20
Nafe" <<A href=3D"mailto:dnafe@magma.ca">dnafe@magma.ca</A>> =
wrote in=20
message <A =
href=3D"news:45a38aec@linux">news:45a38aec@linux</A>...<BR>>>=20
Thanks Dimitrious<BR>>><BR>>><BR>>> "Dimitrios" =
<<A=20
href=3D"mailto:musurgio@otenet.gr">musurgio@otenet.gr</A>> wrote =
in message=20
<A =
href=3D"news:45a0d36c$1@linux">news:45a0d36c$1@linux</A>...<BR>>>=20
><BR>>> > I would like to post the alternative to bus=20
compressing using Paris<BR>eds<BR>>> > =
compressor.<BR>>> >=20
I combined some users tips here...<BR>>> > You use aux 1 as =
a=20
stereo feed to eds stereo compressor.<BR>>> > You use the =
aux as=20
pre and mute every drumtrack.<BR>>> > Now using the aux pan =
pot you=20
send the drumtracks to the stereo field<BR>as<BR>>> >=20
needed.<BR>>> > You open a eds compressor with 1.20 ratio 8 =
(yes=20
only 8) release attack<BR>>> > about<BR>>> > 12 =
o'clock=20
predelay 3 (if you want you can nudge all drumtracks 3 =
ms<BR>to<BR>>>=20
> the<BR>>> > left) threshold -96 and output like 4-5=20
db.<BR>>> > Now these will be the compressed only=20
drums.<BR>>> > Now on aux 2 stereo again pre again yiou use =
the=20
same aux settings and<BR>>you<BR>>> > put on aux 2 same =
eds=20
compressor with same predelay BUT with =
no<BR>>threshold<BR>>> >=20
and no ratio as to have the dry only signal.<BR>>> > Thus =
with aux1=20
you control the compressed drummix only and with =
aux2<BR>the<BR>>>=20
> dry drums.<BR>>> > Happy new Year.<BR>>> >=20
Dimitrios<BR>>><BR>>><BR>> <BR>><BR></BLOCKQUOTE>
<DIV><FONT size=3D2><BR><BR>I choose Polesoft Lockspam to fight spam, =
and=20
you?<BR><A=20
=
href=3D"http://www.polesoft.com/refer.html">http://www.polesoft.com/refer=
..html</A>   </FONT></DIV></BLOCKQUOTE ></BODY></HTML>

------=_NextPart_000_00D2_01C734E8.95A516F0--

Report message to a moderator

Previous Topic:	Perfect drummiking-triggering for super production !
Next Topic:	Ping-Rod Lincoln-

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Dec 24 00:51:58 PST 2024

Total time taken to generate the page: 0.01472 seconds