Home » The PARIS Forums » PARIS: Main » Anyone using FX Teleport here?
|
|
| Re: Anyone using FX Teleport here? [message #66074 is a reply to message #66067] |
Sun, 02 April 2006 14:41   |
Edna Sloan
Messages: 304
Registered: October 2005
|
Senior Member |
|
|
I have it set up and it works fine - not in PARIS though:( I have used it
with Wavelab so far. I don't think it matters where FXT is installed as far
as plugins go. As I am sure you know, you do have to install it on both
computers, host installation and server installation. I used the default
locations. I have all my plugins in the same named folder on both machines,
VstPlugins. These locations will prompted in the install window that comes
up. I'm not sure about using multiple locations? I would try something
simple to get it going first. On the host machine FXT will make an FX
Teleport subfolder in the Plugins folder and it will have all your plugins
with a "lan" extension. . Then when you enable a plugin in your host
sequencer you will have a choice of the plugin with or without the lan
extension. When the server is ready it will display a ready window.
HTH, Edna
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:443026f4@linux...
> On my cubase SX (host) machine, there are numerous folders where VST
> plusgins reside, as follows:
>
> c>Program files>Steinberg>VST Plugins>Powered Plugins
> c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are subfolders
> in this directory with various plugins)
>
> In my remote server machine, the VST plugins live in directories with
> similar names. Cubase SX is not installed on the server, but the directory
> path to the plugins is the same.
>
> Both computers are properly networked using the INTEL NIC cards and the
> Linksys switch that is recommended by Ric at FXTand the network is
> functioning properly.
>
> When I install the FXT program, it prompts a default installation path of
> C>Program Files>FX Telport.
>
> If I use this default path, the FXT program doesn't reecognize any of my
> plugins. If I install it to the directory paths of the VST plugins, same
> thing.
>
> Do I need to uninstall my VST plugins, install FXT and then Reinstall the
> plugins?
>
> WTF do I do here?
>
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66076 is a reply to message #66074] |
Sun, 02 April 2006 15:33 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
So you created a folder, named it VST plugins and put it where?....and then
FXT just automatically found it?
"Edna" <edna@texomaonline.com> wrote in message news:443046a1@linux...
> I have it set up and it works fine - not in PARIS though:( I have used it
> with Wavelab so far. I don't think it matters where FXT is installed as
far
> as plugins go. As I am sure you know, you do have to install it on both
> computers, host installation and server installation. I used the default
> locations. I have all my plugins in the same named folder on both
machines,
> VstPlugins. These locations will prompted in the install window that
comes
> up. I'm not sure about using multiple locations? I would try something
> simple to get it going first. On the host machine FXT will make an FX
> Teleport subfolder in the Plugins folder and it will have all your plugins
> with a "lan" extension. . Then when you enable a plugin in your host
> sequencer you will have a choice of the plugin with or without the lan
> extension. When the server is ready it will display a ready window.
> HTH, Edna
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:443026f4@linux...
> > On my cubase SX (host) machine, there are numerous folders where VST
> > plusgins reside, as follows:
> >
> > c>Program files>Steinberg>VST Plugins>Powered Plugins
> > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
subfolders
> > in this directory with various plugins)
> >
> > In my remote server machine, the VST plugins live in directories with
> > similar names. Cubase SX is not installed on the server, but the
directory
> > path to the plugins is the same.
> >
> > Both computers are properly networked using the INTEL NIC cards and the
> > Linksys switch that is recommended by Ric at FXTand the network is
> > functioning properly.
> >
> > When I install the FXT program, it prompts a default installation path
of
> > C>Program Files>FX Telport.
> >
> > If I use this default path, the FXT program doesn't reecognize any of my
> > plugins. If I install it to the directory paths of the VST plugins, same
> > thing.
> >
> > Do I need to uninstall my VST plugins, install FXT and then Reinstall
the
> > plugins?
> >
> > WTF do I do here?
> >
> >
> >
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66079 is a reply to message #66076] |
Sun, 02 April 2006 16:56 |
Edna Sloan
Messages: 304
Registered: October 2005
|
Senior Member |
|
|
Well, I already had a folder on my host, under C:\Program
Files\Steinberg\VstPlugins. I put this same thing on my server and copied
all my plugins there. Then install FXT on the server. With the server FXT
running, then you install FXT on your host. Then a configure applet will
come up to install the wrappers. Follow instructions in this window and it
will scan and list the plugins. Install what you want, and tell it where to
install the wrappers. I used the string above, and it made an FX Teleport
subfolder in my VstPlugins folder with the wrappers or lan plugins
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:4430535c@linux...
> So you created a folder, named it VST plugins and put it where?....and
then
> FXT just automatically found it?
>
> "Edna" <edna@texomaonline.com> wrote in message news:443046a1@linux...
> > I have it set up and it works fine - not in PARIS though:( I have used
it
> > with Wavelab so far. I don't think it matters where FXT is installed as
> far
> > as plugins go. As I am sure you know, you do have to install it on both
> > computers, host installation and server installation. I used the
default
> > locations. I have all my plugins in the same named folder on both
> machines,
> > VstPlugins. These locations will prompted in the install window that
> comes
> > up. I'm not sure about using multiple locations? I would try something
> > simple to get it going first. On the host machine FXT will make an FX
> > Teleport subfolder in the Plugins folder and it will have all your
plugins
> > with a "lan" extension. . Then when you enable a plugin in your host
> > sequencer you will have a choice of the plugin with or without the lan
> > extension. When the server is ready it will display a ready window.
> > HTH, Edna
> >
> > "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > news:443026f4@linux...
> > > On my cubase SX (host) machine, there are numerous folders where VST
> > > plusgins reside, as follows:
> > >
> > > c>Program files>Steinberg>VST Plugins>Powered Plugins
> > > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> > > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
> subfolders
> > > in this directory with various plugins)
> > >
> > > In my remote server machine, the VST plugins live in directories with
> > > similar names. Cubase SX is not installed on the server, but the
> directory
> > > path to the plugins is the same.
> > >
> > > Both computers are properly networked using the INTEL NIC cards and
the
> > > Linksys switch that is recommended by Ric at FXTand the network is
> > > functioning properly.
> > >
> > > When I install the FXT program, it prompts a default installation path
> of
> > > C>Program Files>FX Telport.
> > >
> > > If I use this default path, the FXT program doesn't reecognize any of
my
> > > plugins. If I install it to the directory paths of the VST plugins,
same
> > > thing.
> > >
> > > Do I need to uninstall my VST plugins, install FXT and then Reinstall
> the
> > > plugins?
> > >
> > > WTF do I do here?
> > >
> > >
> > >
> >
> >
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66083 is a reply to message #66079] |
Sun, 02 April 2006 19:29 |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
Deej, sounds like you might have to move some plugins around
within your folders, so don't forget you'll have to reconfigure
your plugins in all your CubaseSX projects if you move them to
other folders, so you might want to save your plugin settings
as presets (easy to do if you jsut create new folders within
each of your projects in SX, then save each plugin setting on
each channel as a preset - .fxp file - takes up hardly any room
on your hard drive) or even write them down - whichever you
find easier... me I'd go with opton #1, saving them all as
presets!
SX will tell you which plugins you're missing (the ones that
have been moved), when you load a given project, so write these
down as it prompts you, or you can save the contents of that
prompt window as a text file & printout if you'd rather do that.
Save the plugin presets BEFORE you move them to other folders!!!
Neil
"Edna" <edna@texomaonline.com> wrote:
>Well, I already had a folder on my host, under C:\Program
>Files\Steinberg\VstPlugins. I put this same thing on my server and copied
>all my plugins there. Then install FXT on the server. With the server
FXT
>running, then you install FXT on your host. Then a configure applet will
>come up to install the wrappers. Follow instructions in this window and
it
>will scan and list the plugins. Install what you want, and tell it where
to
>install the wrappers. I used the string above, and it made an FX Teleport
>subfolder in my VstPlugins folder with the wrappers or lan plugins
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>news:4430535c@linux...
>> So you created a folder, named it VST plugins and put it where?....and
>then
>> FXT just automatically found it?
>>
>> "Edna" <edna@texomaonline.com> wrote in message news:443046a1@linux...
>> > I have it set up and it works fine - not in PARIS though:( I have used
>it
>> > with Wavelab so far. I don't think it matters where FXT is installed
as
>> far
>> > as plugins go. As I am sure you know, you do have to install it on
both
>> > computers, host installation and server installation. I used the
>default
>> > locations. I have all my plugins in the same named folder on both
>> machines,
>> > VstPlugins. These locations will prompted in the install window that
>> comes
>> > up. I'm not sure about using multiple locations? I would try something
>> > simple to get it going first. On the host machine FXT will make an
FX
>> > Teleport subfolder in the Plugins folder and it will have all your
>plugins
>> > with a "lan" extension. . Then when you enable a plugin in your host
>> > sequencer you will have a choice of the plugin with or without the lan
>> > extension. When the server is ready it will display a ready window.
>> > HTH, Edna
>> >
>> > "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> > news:443026f4@linux...
>> > > On my cubase SX (host) machine, there are numerous folders where VST
>> > > plusgins reside, as follows:
>> > >
>> > > c>Program files>Steinberg>VST Plugins>Powered Plugins
>> > > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
>> > > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
>> subfolders
>> > > in this directory with various plugins)
>> > >
>> > > In my remote server machine, the VST plugins live in directories with
>> > > similar names. Cubase SX is not installed on the server, but the
>> directory
>> > > path to the plugins is the same.
>> > >
>> > > Both computers are properly networked using the INTEL NIC cards and
>the
>> > > Linksys switch that is recommended by Ric at FXTand the network is
>> > > functioning properly.
>> > >
>> > > When I install the FXT program, it prompts a default installation
path
>> of
>> > > C>Program Files>FX Telport.
>> > >
>> > > If I use this default path, the FXT program doesn't reecognize any
of
>my
>> > > plugins. If I install it to the directory paths of the VST plugins,
>same
>> > > thing.
>> > >
>> > > Do I need to uninstall my VST plugins, install FXT and then Reinstall
>> the
>> > > plugins?
>> > >
>> > > WTF do I do here?
>> > >
>> > >
>> > >
>> >
>> >
>>
>>
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66087 is a reply to message #66083] |
Sun, 02 April 2006 19:58 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
If this program won't ID my plugins where they currently live, it's
worthless to me. I'm not going to jack around with reconfiguring about 20
songs in Cubase SX right now. The thing that seems to be happening is that
it's not finding the plugins on the server.
I told the developer I'd do some beta testing for him using my 4 x UAD-1
cards. I've got an email to him in the pipeline but he hasn't answered.
"Neil" <OIUOIU@OIU.com> wrote in message news:4430886d$1@linux...
>
> Deej, sounds like you might have to move some plugins around
> within your folders, so don't forget you'll have to reconfigure
> your plugins in all your CubaseSX projects if you move them to
> other folders, so you might want to save your plugin settings
> as presets (easy to do if you jsut create new folders within
> each of your projects in SX, then save each plugin setting on
> each channel as a preset - .fxp file - takes up hardly any room
> on your hard drive) or even write them down - whichever you
> find easier... me I'd go with opton #1, saving them all as
> presets!
>
> SX will tell you which plugins you're missing (the ones that
> have been moved), when you load a given project, so write these
> down as it prompts you, or you can save the contents of that
> prompt window as a text file & printout if you'd rather do that.
>
> Save the plugin presets BEFORE you move them to other folders!!!
>
> Neil
>
>
> "Edna" <edna@texomaonline.com> wrote:
> >Well, I already had a folder on my host, under C:\Program
> >Files\Steinberg\VstPlugins. I put this same thing on my server and
copied
> >all my plugins there. Then install FXT on the server. With the server
> FXT
> >running, then you install FXT on your host. Then a configure applet will
> >come up to install the wrappers. Follow instructions in this window and
> it
> >will scan and list the plugins. Install what you want, and tell it where
> to
> >install the wrappers. I used the string above, and it made an FX
Teleport
> >subfolder in my VstPlugins folder with the wrappers or lan plugins
> >
> >"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >news:4430535c@linux...
> >> So you created a folder, named it VST plugins and put it where?....and
> >then
> >> FXT just automatically found it?
> >>
> >> "Edna" <edna@texomaonline.com> wrote in message news:443046a1@linux...
> >> > I have it set up and it works fine - not in PARIS though:( I have
used
> >it
> >> > with Wavelab so far. I don't think it matters where FXT is installed
> as
> >> far
> >> > as plugins go. As I am sure you know, you do have to install it on
> both
> >> > computers, host installation and server installation. I used the
> >default
> >> > locations. I have all my plugins in the same named folder on both
> >> machines,
> >> > VstPlugins. These locations will prompted in the install window that
> >> comes
> >> > up. I'm not sure about using multiple locations? I would try
something
> >> > simple to get it going first. On the host machine FXT will make an
> FX
> >> > Teleport subfolder in the Plugins folder and it will have all your
> >plugins
> >> > with a "lan" extension. . Then when you enable a plugin in your
host
> >> > sequencer you will have a choice of the plugin with or without the
lan
> >> > extension. When the server is ready it will display a ready window.
> >> > HTH, Edna
> >> >
> >> > "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >> > news:443026f4@linux...
> >> > > On my cubase SX (host) machine, there are numerous folders where
VST
> >> > > plusgins reside, as follows:
> >> > >
> >> > > c>Program files>Steinberg>VST Plugins>Powered Plugins
> >> > > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> >> > > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
> >> subfolders
> >> > > in this directory with various plugins)
> >> > >
> >> > > In my remote server machine, the VST plugins live in directories
with
> >> > > similar names. Cubase SX is not installed on the server, but the
> >> directory
> >> > > path to the plugins is the same.
> >> > >
> >> > > Both computers are properly networked using the INTEL NIC cards and
> >the
> >> > > Linksys switch that is recommended by Ric at FXTand the network is
> >> > > functioning properly.
> >> > >
> >> > > When I install the FXT program, it prompts a default installation
> path
> >> of
> >> > > C>Program Files>FX Telport.
> >> > >
> >> > > If I use this default path, the FXT program doesn't reecognize any
> of
> >my
> >> > > plugins. If I install it to the directory paths of the VST plugins,
> >same
> >> > > thing.
> >> > >
> >> > > Do I need to uninstall my VST plugins, install FXT and then
Reinstall
> >> the
> >> > > plugins?
> >> > >
> >> > > WTF do I do here?
> >> > >
> >> > >
> >> > >
> >> >
> >> >
> >>
> >>
> >
> >
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66091 is a reply to message #66087] |
Sun, 02 April 2006 21:23 |
Edna Sloan
Messages: 304
Registered: October 2005
|
Senior Member |
|
|
Have you told FXT where to find them? (in the configure applet) - your
shared location on the server?
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:44309187$1@linux...
> If this program won't ID my plugins where they currently live, it's
> worthless to me. I'm not going to jack around with reconfiguring about 20
> songs in Cubase SX right now. The thing that seems to be happening is that
> it's not finding the plugins on the server.
>
> I told the developer I'd do some beta testing for him using my 4 x UAD-1
> cards. I've got an email to him in the pipeline but he hasn't answered.
>
>
> "Neil" <OIUOIU@OIU.com> wrote in message news:4430886d$1@linux...
> >
> > Deej, sounds like you might have to move some plugins around
> > within your folders, so don't forget you'll have to reconfigure
> > your plugins in all your CubaseSX projects if you move them to
> > other folders, so you might want to save your plugin settings
> > as presets (easy to do if you jsut create new folders within
> > each of your projects in SX, then save each plugin setting on
> > each channel as a preset - .fxp file - takes up hardly any room
> > on your hard drive) or even write them down - whichever you
> > find easier... me I'd go with opton #1, saving them all as
> > presets!
> >
> > SX will tell you which plugins you're missing (the ones that
> > have been moved), when you load a given project, so write these
> > down as it prompts you, or you can save the contents of that
> > prompt window as a text file & printout if you'd rather do that.
> >
> > Save the plugin presets BEFORE you move them to other folders!!!
> >
> > Neil
> >
> >
> > "Edna" <edna@texomaonline.com> wrote:
> > >Well, I already had a folder on my host, under C:\Program
> > >Files\Steinberg\VstPlugins. I put this same thing on my server and
> copied
> > >all my plugins there. Then install FXT on the server. With the server
> > FXT
> > >running, then you install FXT on your host. Then a configure applet
will
> > >come up to install the wrappers. Follow instructions in this window
and
> > it
> > >will scan and list the plugins. Install what you want, and tell it
where
> > to
> > >install the wrappers. I used the string above, and it made an FX
> Teleport
> > >subfolder in my VstPlugins folder with the wrappers or lan plugins
> > >
> > >"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > >news:4430535c@linux...
> > >> So you created a folder, named it VST plugins and put it
where?....and
> > >then
> > >> FXT just automatically found it?
> > >>
> > >> "Edna" <edna@texomaonline.com> wrote in message
news:443046a1@linux...
> > >> > I have it set up and it works fine - not in PARIS though:( I have
> used
> > >it
> > >> > with Wavelab so far. I don't think it matters where FXT is
installed
> > as
> > >> far
> > >> > as plugins go. As I am sure you know, you do have to install it on
> > both
> > >> > computers, host installation and server installation. I used the
> > >default
> > >> > locations. I have all my plugins in the same named folder on both
> > >> machines,
> > >> > VstPlugins. These locations will prompted in the install window
that
> > >> comes
> > >> > up. I'm not sure about using multiple locations? I would try
> something
> > >> > simple to get it going first. On the host machine FXT will make an
> > FX
> > >> > Teleport subfolder in the Plugins folder and it will have all your
> > >plugins
> > >> > with a "lan" extension. . Then when you enable a plugin in your
> host
> > >> > sequencer you will have a choice of the plugin with or without the
> lan
> > >> > extension. When the server is ready it will display a ready
window.
> > >> > HTH, Edna
> > >> >
> > >> > "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > >> > news:443026f4@linux...
> > >> > > On my cubase SX (host) machine, there are numerous folders where
> VST
> > >> > > plusgins reside, as follows:
> > >> > >
> > >> > > c>Program files>Steinberg>VST Plugins>Powered Plugins
> > >> > > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> > >> > > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
> > >> subfolders
> > >> > > in this directory with various plugins)
> > >> > >
> > >> > > In my remote server machine, the VST plugins live in directories
> with
> > >> > > similar names. Cubase SX is not installed on the server, but the
> > >> directory
> > >> > > path to the plugins is the same.
> > >> > >
> > >> > > Both computers are properly networked using the INTEL NIC cards
and
> > >the
> > >> > > Linksys switch that is recommended by Ric at FXTand the network
is
> > >> > > functioning properly.
> > >> > >
> > >> > > When I install the FXT program, it prompts a default installation
> > path
> > >> of
> > >> > > C>Program Files>FX Telport.
> > >> > >
> > >> > > If I use this default path, the FXT program doesn't reecognize
any
> > of
> > >my
> > >> > > plugins. If I install it to the directory paths of the VST
plugins,
> > >same
> > >> > > thing.
> > >> > >
> > >> > > Do I need to uninstall my VST plugins, install FXT and then
> Reinstall
> > >> the
> > >> > > plugins?
> > >> > >
> > >> > > WTF do I do here?
> > >> > >
> > >> > >
> > >> > >
> > >> >
> > >> >
> > >>
> > >>
> > >
> > >
> >
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66092 is a reply to message #66087] |
Sun, 02 April 2006 21:32 |
Edna Sloan
Messages: 304
Registered: October 2005
|
Senior Member |
|
|
BTW, the instructions mentions paths, plural, so it seems likely that you
can have multiple locations on the server, just enter them all in the
install window. I will try this on mine when I hook my temporaray server
back up tomorrow. In any case, you could make a new vst folder just for
FXT, leaving the others where they are for your other songs. I was having
the same problem as you until I got the shared location right in the config
applet.
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:44309187$1@linux...
> If this program won't ID my plugins where they currently live, it's
> worthless to me. I'm not going to jack around with reconfiguring about 20
> songs in Cubase SX right now. The thing that seems to be happening is that
> it's not finding the plugins on the server.
>
> I told the developer I'd do some beta testing for him using my 4 x UAD-1
> cards. I've got an email to him in the pipeline but he hasn't answered.
>
>
> "Neil" <OIUOIU@OIU.com> wrote in message news:4430886d$1@linux...
> >
> > Deej, sounds like you might have to move some plugins around
> > within your folders, so don't forget you'll have to reconfigure
> > your plugins in all your CubaseSX projects if you move them to
> > other folders, so you might want to save your plugin settings
> > as presets (easy to do if you jsut create new folders within
> > each of your projects in SX, then save each plugin setting on
> > each channel as a preset - .fxp file - takes up hardly any room
> > on your hard drive) or even write them down - whichever you
> > find easier... me I'd go with opton #1, saving them all as
> > presets!
> >
> > SX will tell you which plugins you're missing (the ones that
> > have been moved), when you load a given project, so write these
> > down as it prompts you, or you can save the contents of that
> > prompt window as a text file & printout if you'd rather do that.
> >
> > Save the plugin presets BEFORE you move them to other folders!!!
> >
> > Neil
> >
> >
> > "Edna" <edna@texomaonline.com> wrote:
> > >Well, I already had a folder on my host, under C:\Program
> > >Files\Steinberg\VstPlugins. I put this same thing on my server and
> copied
> > >all my plugins there. Then install FXT on the server. With the server
> > FXT
> > >running, then you install FXT on your host. Then a configure applet
will
> > >come up to install the wrappers. Follow instructions in this window
and
> > it
> > >will scan and list the plugins. Install what you want, and tell it
where
> > to
> > >install the wrappers. I used the string above, and it made an FX
> Teleport
> > >subfolder in my VstPlugins folder with the wrappers or lan plugins
> > >
> > >"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > >news:4430535c@linux...
> > >> So you created a folder, named it VST plugins and put it
where?....and
> > >then
> > >> FXT just automatically found it?
> > >>
> > >> "Edna" <edna@texomaonline.com> wrote in message
news:443046a1@linux...
> > >> > I have it set up and it works fine - not in PARIS though:( I have
> used
> > >it
> > >> > with Wavelab so far. I don't think it matters where FXT is
installed
> > as
> > >> far
> > >> > as plugins go. As I am sure you know, you do have to install it on
> > both
> > >> > computers, host installation and server installation. I used the
> > >default
> > >> > locations. I have all my plugins in the same named folder on both
> > >> machines,
> > >> > VstPlugins. These locations will prompted in the install window
that
> > >> comes
> > >> > up. I'm not sure about using multiple locations? I would try
> something
> > >> > simple to get it going first. On the host machine FXT will make an
> > FX
> > >> > Teleport subfolder in the Plugins folder and it will have all your
> > >plugins
> > >> > with a "lan" extension. . Then when you enable a plugin in your
> host
> > >> > sequencer you will have a choice of the plugin with or without the
> lan
> > >> > extension. When the server is ready it will display a ready
window.
> > >> > HTH, Edna
> > >> >
> > >> > "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > >> > news:443026f4@linux...
> > >> > > On my cubase SX (host) machine, there are numerous folders where
> VST
> > >> > > plusgins reside, as follows:
> > >> > >
> > >> > > c>Program files>Steinberg>VST Plugins>Powered Plugins
> > >> > > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> > >> > > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
> > >> subfolders
> > >> > > in this directory with various plugins)
> > >> > >
> > >> > > In my remote server machine, the VST plugins live in directories
> with
> > >> > > similar names. Cubase SX is not installed on the server, but the
> > >> directory
> > >> > > path to the plugins is the same.
> > >> > >
> > >> > > Both computers are properly networked using the INTEL NIC cards
and
> > >the
> > >> > > Linksys switch that is recommended by Ric at FXTand the network
is
> > >> > > functioning properly.
> > >> > >
> > >> > > When I install the FXT program, it prompts a default installation
> > path
> > >> of
> > >> > > C>Program Files>FX Telport.
> > >> > >
> > >> > > If I use this default path, the FXT program doesn't reecognize
any
> > of
> > >my
> > >> > > plugins. If I install it to the directory paths of the VST
plugins,
> > >same
> > >> > > thing.
> > >> > >
> > >> > > Do I need to uninstall my VST plugins, install FXT and then
> Reinstall
> > >> the
> > >> > > plugins?
> > >> > >
> > >> > > WTF do I do here?
> > >> > >
> > >> > >
> > >> > >
> > >> >
> > >> >
> > >>
> > >>
> > >
> > >
> >
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66094 is a reply to message #66087] |
Sun, 02 April 2006 23:13 |
Edna Sloan
Messages: 304
Registered: October 2005
|
Senior Member |
|
|
One other item, is, if your server vst folder is in the program files folder
path, make sure you have access to it thru this path over the network. I
noticed when I set my network up that Program Files was not automatically
shared just because my C drive was shared. So I had to drag it into the
shared files folder and make my shared connection through this path. Of
course, you can try putting the vst folder in the shared files folder
instead. Anyway, make sure you can access the vst folder on the server from
the host thru the network - so it can be found on the host scan. Gotta go,
hub yelling at me.
Edna
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:44309187$1@linux...
> If this program won't ID my plugins where they currently live, it's
> worthless to me. I'm not going to jack around with reconfiguring about 20
> songs in Cubase SX right now. The thing that seems to be happening is that
> it's not finding the plugins on the server.
>
> I told the developer I'd do some beta testing for him using my 4 x UAD-1
> cards. I've got an email to him in the pipeline but he hasn't answered.
>
>
> "Neil" <OIUOIU@OIU.com> wrote in message news:4430886d$1@linux...
> >
> > Deej, sounds like you might have to move some plugins around
> > within your folders, so don't forget you'll have to reconfigure
> > your plugins in all your CubaseSX projects if you move them to
> > other folders, so you might want to save your plugin settings
> > as presets (easy to do if you jsut create new folders within
> > each of your projects in SX, then save each plugin setting on
> > each channel as a preset - .fxp file - takes up hardly any room
> > on your hard drive) or even write them down - whichever you
> > find easier... me I'd go with opton #1, saving them all as
> > presets!
> >
> > SX will tell you which plugins you're missing (the ones that
> > have been moved), when you load a given project, so write these
> > down as it prompts you, or you can save the contents of that
> > prompt window as a text file & printout if you'd rather do that.
> >
> > Save the plugin presets BEFORE you move them to other folders!!!
> >
> > Neil
> >
> >
> > "Edna" <edna@texomaonline.com> wrote:
> > >Well, I already had a folder on my host, under C:\Program
> > >Files\Steinberg\VstPlugins. I put this same thing on my server and
> copied
> > >all my plugins there. Then install FXT on the server. With the server
> > FXT
> > >running, then you install FXT on your host. Then a configure applet
will
> > >come up to install the wrappers. Follow instructions in this window
and
> > it
> > >will scan and list the plugins. Install what you want, and tell it
where
> > to
> > >install the wrappers. I used the string above, and it made an FX
> Teleport
> > >subfolder in my VstPlugins folder with the wrappers or lan plugins
> > >
> > >"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > >news:4430535c@linux...
> > >> So you created a folder, named it VST plugins and put it
where?....and
> > >then
> > >> FXT just automatically found it?
> > >>
> > >> "Edna" <edna@texomaonline.com> wrote in message
news:443046a1@linux...
> > >> > I have it set up and it works fine - not in PARIS though:( I have
> used
> > >it
> > >> > with Wavelab so far. I don't think it matters where FXT is
installed
> > as
> > >> far
> > >> > as plugins go. As I am sure you know, you do have to install it on
> > both
> > >> > computers, host installation and server installation. I used the
> > >default
> > >> > locations. I have all my plugins in the same named folder on both
> > >> machines,
> > >> > VstPlugins. These locations will prompted in the install window
that
> > >> comes
> > >> > up. I'm not sure about using multiple locations? I would try
> something
> > >> > simple to get it going first. On the host machine FXT will make an
> > FX
> > >> > Teleport subfolder in the Plugins folder and it will have all your
> > >plugins
> > >> > with a "lan" extension. . Then when you enable a plugin in your
> host
> > >> > sequencer you will have a choice of the plugin with or without the
> lan
> > >> > extension. When the server is ready it will display a ready
window.
> > >> > HTH, Edna
> > >> >
> > >> > "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > >> > news:443026f4@linux...
> > >> > > On my cubase SX (host) machine, there are numerous folders where
> VST
> > >> > > plusgins reside, as follows:
> > >> > >
> > >> > > c>Program files>Steinberg>VST Plugins>Powered Plugins
> > >> > > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> > >> > > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
> > >> subfolders
> > >> > > in this directory with various plugins)
> > >> > >
> > >> > > In my remote server machine, the VST plugins live in directories
> with
> > >> > > similar names. Cubase SX is not installed on the server, but the
> > >> directory
> > >> > > path to the plugins is the same.
> > >> > >
> > >> > > Both computers are properly networked using the INTEL NIC cards
and
> > >the
> > >> > > Linksys switch that is recommended by Ric at FXTand the network
is
> > >> > > functioning properly.
> > >> > >
> > >> > > When I install the FXT program, it prompts a default installation
> > path
> > >> of
> > >> > > C>Program Files>FX Telport.
> > >> > >
> > >> > > If I use this default path, the FXT program doesn't reecognize
any
> > of
> > >my
> > >> > > plugins. If I install it to the directory paths of the VST
plugins,
> > >same
> > >> > > thing.
> > >> > >
> > >> > > Do I need to uninstall my VST plugins, install FXT and then
> Reinstall
> > >> the
> > >> > > plugins?
> > >> > >
> > >> > > WTF do I do here?
> > >> > >
> > >> > >
> > >> > >
> > >> >
> > >> >
> > >>
> > >>
> > >
> > >
> >
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66150 is a reply to message #66067] |
Wed, 05 April 2006 06:11 |
Rob Arsenault
Messages: 152
Registered: September 2005
|
Senior Member |
|
|
DJ, so does this mean one could have UAD plugs running in real-time in
Cubase SX on a second box and have Paris networked to this box via TX
teleport therefore allowing for "Auto latency compensation" within Paris?
If so, this is awesome news...!!
If not, then back to regular scheduled programming.
RoB a
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:443026f4@linux...
> On my cubase SX (host) machine, there are numerous folders where VST
> plusgins reside, as follows:
>
> c>Program files>Steinberg>VST Plugins>Powered Plugins
> c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are subfolders
> in this directory with various plugins)
>
> In my remote server machine, the VST plugins live in directories with
> similar names. Cubase SX is not installed on the server, but the directory
> path to the plugins is the same.
>
> Both computers are properly networked using the INTEL NIC cards and the
> Linksys switch that is recommended by Ric at FXTand the network is
> functioning properly.
>
> When I install the FXT program, it prompts a default installation path of
> C>Program Files>FX Telport.
>
> If I use this default path, the FXT program doesn't reecognize any of my
> plugins. If I install it to the directory paths of the VST plugins, same
> thing.
>
> Do I need to uninstall my VST plugins, install FXT and then Reinstall the
> plugins?
>
> WTF do I do here?
>
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66152 is a reply to message #66150] |
Wed, 05 April 2006 06:26 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
If Cubase SX PDC works with FXT then I think this will work. Right now, I
can use UAD-1 plugins as inserts by sending/returning audio from Paris
to/from Cubase SX with the UAD-1 cards residing in the Cubase SX machine. I
will be experimenting with installing an FX Teleport *wrapped* UAD-1 plugin
from the FXT server into an insert in Cubase SX, then sending/returning
audio from Paris to/from this plugin in Cubase SX.
I will probably be posting up about this tomorrow night.
Deej
"Rob Arsenault" <info@studiomanitou.com> wrote in message
news:4433c2a5@linux...
> DJ, so does this mean one could have UAD plugs running in real-time in
> Cubase SX on a second box and have Paris networked to this box via TX
> teleport therefore allowing for "Auto latency compensation" within Paris?
>
> If so, this is awesome news...!!
> If not, then back to regular scheduled programming.
>
> RoB a
>
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:443026f4@linux...
> > On my cubase SX (host) machine, there are numerous folders where VST
> > plusgins reside, as follows:
> >
> > c>Program files>Steinberg>VST Plugins>Powered Plugins
> > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
subfolders
> > in this directory with various plugins)
> >
> > In my remote server machine, the VST plugins live in directories with
> > similar names. Cubase SX is not installed on the server, but the
directory
> > path to the plugins is the same.
> >
> > Both computers are properly networked using the INTEL NIC cards and the
> > Linksys switch that is recommended by Ric at FXTand the network is
> > functioning properly.
> >
> > When I install the FXT program, it prompts a default installation path
of
> > C>Program Files>FX Telport.
> >
> > If I use this default path, the FXT program doesn't reecognize any of my
> > plugins. If I install it to the directory paths of the VST plugins, same
> > thing.
> >
> > Do I need to uninstall my VST plugins, install FXT and then Reinstall
the
> > plugins?
> >
> > WTF do I do here?
> >
> >
> >
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66153 is a reply to message #66152] |
Wed, 05 April 2006 06:57 |
Rob Arsenault
Messages: 152
Registered: September 2005
|
Senior Member |
|
|
Thanks man, good stuff, please do keep us informed.
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:4433c79c@linux...
> If Cubase SX PDC works with FXT then I think this will work. Right now, I
> can use UAD-1 plugins as inserts by sending/returning audio from Paris
> to/from Cubase SX with the UAD-1 cards residing in the Cubase SX machine.
> I
> will be experimenting with installing an FX Teleport *wrapped* UAD-1
> plugin
> from the FXT server into an insert in Cubase SX, then sending/returning
> audio from Paris to/from this plugin in Cubase SX.
>
> I will probably be posting up about this tomorrow night.
>
> Deej
>
>
> "Rob Arsenault" <info@studiomanitou.com> wrote in message
> news:4433c2a5@linux...
>> DJ, so does this mean one could have UAD plugs running in real-time in
>> Cubase SX on a second box and have Paris networked to this box via TX
>> teleport therefore allowing for "Auto latency compensation" within Paris?
>>
>> If so, this is awesome news...!!
>> If not, then back to regular scheduled programming.
>>
>> RoB a
>>
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> news:443026f4@linux...
>> > On my cubase SX (host) machine, there are numerous folders where VST
>> > plusgins reside, as follows:
>> >
>> > c>Program files>Steinberg>VST Plugins>Powered Plugins
>> > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
>> > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
> subfolders
>> > in this directory with various plugins)
>> >
>> > In my remote server machine, the VST plugins live in directories with
>> > similar names. Cubase SX is not installed on the server, but the
> directory
>> > path to the plugins is the same.
>> >
>> > Both computers are properly networked using the INTEL NIC cards and the
>> > Linksys switch that is recommended by Ric at FXTand the network is
>> > functioning properly.
>> >
>> > When I install the FXT program, it prompts a default installation path
> of
>> > C>Program Files>FX Telport.
>> >
>> > If I use this default path, the FXT program doesn't reecognize any of
>> > my
>> > plugins. If I install it to the directory paths of the VST plugins,
>> > same
>> > thing.
>> >
>> > Do I need to uninstall my VST plugins, install FXT and then Reinstall
> the
>> > plugins?
>> >
>> > WTF do I do here?
>> >
>> >
>> >
>>
>>
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66156 is a reply to message #66153] |
Wed, 05 April 2006 07:44 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
Will do. I've been having some problems getting FXT to work, but I believe I
have determined what the problem is so hopefully I will have time tomorrow
to get this resolved.
Deej
"Rob Arsenault" <info@studiomanitou.com> wrote in message
news:4433cd85@linux...
> Thanks man, good stuff, please do keep us informed.
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:4433c79c@linux...
> > If Cubase SX PDC works with FXT then I think this will work. Right now,
I
> > can use UAD-1 plugins as inserts by sending/returning audio from Paris
> > to/from Cubase SX with the UAD-1 cards residing in the Cubase SX
machine.
> > I
> > will be experimenting with installing an FX Teleport *wrapped* UAD-1
> > plugin
> > from the FXT server into an insert in Cubase SX, then sending/returning
> > audio from Paris to/from this plugin in Cubase SX.
> >
> > I will probably be posting up about this tomorrow night.
> >
> > Deej
> >
> >
> > "Rob Arsenault" <info@studiomanitou.com> wrote in message
> > news:4433c2a5@linux...
> >> DJ, so does this mean one could have UAD plugs running in real-time in
> >> Cubase SX on a second box and have Paris networked to this box via TX
> >> teleport therefore allowing for "Auto latency compensation" within
Paris?
> >>
> >> If so, this is awesome news...!!
> >> If not, then back to regular scheduled programming.
> >>
> >> RoB a
> >>
> >>
> >>
> >> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >> news:443026f4@linux...
> >> > On my cubase SX (host) machine, there are numerous folders where VST
> >> > plusgins reside, as follows:
> >> >
> >> > c>Program files>Steinberg>VST Plugins>Powered Plugins
> >> > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> >> > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
> > subfolders
> >> > in this directory with various plugins)
> >> >
> >> > In my remote server machine, the VST plugins live in directories with
> >> > similar names. Cubase SX is not installed on the server, but the
> > directory
> >> > path to the plugins is the same.
> >> >
> >> > Both computers are properly networked using the INTEL NIC cards and
the
> >> > Linksys switch that is recommended by Ric at FXTand the network is
> >> > functioning properly.
> >> >
> >> > When I install the FXT program, it prompts a default installation
path
> > of
> >> > C>Program Files>FX Telport.
> >> >
> >> > If I use this default path, the FXT program doesn't reecognize any of
> >> > my
> >> > plugins. If I install it to the directory paths of the VST plugins,
> >> > same
> >> > thing.
> >> >
> >> > Do I need to uninstall my VST plugins, install FXT and then Reinstall
> > the
> >> > plugins?
> >> >
> >> > WTF do I do here?
> >> >
> >> >
> >> >
> >>
> >>
> >
> >
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66189 is a reply to message #66156] |
Wed, 05 April 2006 18:24 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
I will be all over this if it pans dude.
AA
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:4433dd0c@linux...
> Will do. I've been having some problems getting FXT to work, but I believe
> I
> have determined what the problem is so hopefully I will have time tomorrow
> to get this resolved.
>
> Deej
>
> "Rob Arsenault" <info@studiomanitou.com> wrote in message
> news:4433cd85@linux...
>> Thanks man, good stuff, please do keep us informed.
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> news:4433c79c@linux...
>> > If Cubase SX PDC works with FXT then I think this will work. Right now,
> I
>> > can use UAD-1 plugins as inserts by sending/returning audio from Paris
>> > to/from Cubase SX with the UAD-1 cards residing in the Cubase SX
> machine.
>> > I
>> > will be experimenting with installing an FX Teleport *wrapped* UAD-1
>> > plugin
>> > from the FXT server into an insert in Cubase SX, then sending/returning
>> > audio from Paris to/from this plugin in Cubase SX.
>> >
>> > I will probably be posting up about this tomorrow night.
>> >
>> > Deej
>> >
>> >
>> > "Rob Arsenault" <info@studiomanitou.com> wrote in message
>> > news:4433c2a5@linux...
>> >> DJ, so does this mean one could have UAD plugs running in real-time in
>> >> Cubase SX on a second box and have Paris networked to this box via TX
>> >> teleport therefore allowing for "Auto latency compensation" within
> Paris?
>> >>
>> >> If so, this is awesome news...!!
>> >> If not, then back to regular scheduled programming.
>> >>
>> >> RoB a
>> >>
>> >>
>> >>
>> >> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> >> news:443026f4@linux...
>> >> > On my cubase SX (host) machine, there are numerous folders where VST
>> >> > plusgins reside, as follows:
>> >> >
>> >> > c>Program files>Steinberg>VST Plugins>Powered Plugins
>> >> > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
>> >> > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
>> > subfolders
>> >> > in this directory with various plugins)
>> >> >
>> >> > In my remote server machine, the VST plugins live in directories
>> >> > with
>> >> > similar names. Cubase SX is not installed on the server, but the
>> > directory
>> >> > path to the plugins is the same.
>> >> >
>> >> > Both computers are properly networked using the INTEL NIC cards and
> the
>> >> > Linksys switch that is recommended by Ric at FXTand the network is
>> >> > functioning properly.
>> >> >
>> >> > When I install the FXT program, it prompts a default installation
> path
>> > of
>> >> > C>Program Files>FX Telport.
>> >> >
>> >> > If I use this default path, the FXT program doesn't reecognize any
>> >> > of
>> >> > my
>> >> > plugins. If I install it to the directory paths of the VST plugins,
>> >> > same
>> >> > thing.
>> >> >
>> >> > Do I need to uninstall my VST plugins, install FXT and then
>> >> > Reinstall
>> > the
>> >> > plugins?
>> >> >
>> >> > WTF do I do here?
>> >> >
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66194 is a reply to message #66189] |
Wed, 05 April 2006 19:43 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
I had a friend of mine who is a networking guru configure a number of
machines here in order to deal with some issues that are, as usual,
complicated by my insistence on doing things *my way*. This has created a
scenario that FXT does not like. We're going to rethink this tomorrow
morning. Souldn't be impossible to suss. Certain Symantec issues are
involved though, so who knows?
Deej
"Aaron Allen" <nospam@not_here.dude> wrote in message news:44346f9d@linux...
> I will be all over this if it pans dude.
> AA
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:4433dd0c@linux...
> > Will do. I've been having some problems getting FXT to work, but I
believe
> > I
> > have determined what the problem is so hopefully I will have time
tomorrow
> > to get this resolved.
> >
> > Deej
> >
> > "Rob Arsenault" <info@studiomanitou.com> wrote in message
> > news:4433cd85@linux...
> >> Thanks man, good stuff, please do keep us informed.
> >>
> >>
> >> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >> news:4433c79c@linux...
> >> > If Cubase SX PDC works with FXT then I think this will work. Right
now,
> > I
> >> > can use UAD-1 plugins as inserts by sending/returning audio from
Paris
> >> > to/from Cubase SX with the UAD-1 cards residing in the Cubase SX
> > machine.
> >> > I
> >> > will be experimenting with installing an FX Teleport *wrapped* UAD-1
> >> > plugin
> >> > from the FXT server into an insert in Cubase SX, then
sending/returning
> >> > audio from Paris to/from this plugin in Cubase SX.
> >> >
> >> > I will probably be posting up about this tomorrow night.
> >> >
> >> > Deej
> >> >
> >> >
> >> > "Rob Arsenault" <info@studiomanitou.com> wrote in message
> >> > news:4433c2a5@linux...
> >> >> DJ, so does this mean one could have UAD plugs running in real-time
in
> >> >> Cubase SX on a second box and have Paris networked to this box via
TX
> >> >> teleport therefore allowing for "Auto latency compensation" within
> > Paris?
> >> >>
> >> >> If so, this is awesome news...!!
> >> >> If not, then back to regular scheduled programming.
> >> >>
> >> >> RoB a
> >> >>
> >> >>
> >> >>
> >> >> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >> >> news:443026f4@linux...
> >> >> > On my cubase SX (host) machine, there are numerous folders where
VST
> >> >> > plusgins reside, as follows:
> >> >> >
> >> >> > c>Program files>Steinberg>VST Plugins>Powered Plugins
> >> >> > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
> >> >> > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
> >> > subfolders
> >> >> > in this directory with various plugins)
> >> >> >
> >> >> > In my remote server machine, the VST plugins live in directories
> >> >> > with
> >> >> > similar names. Cubase SX is not installed on the server, but the
> >> > directory
> >> >> > path to the plugins is the same.
> >> >> >
> >> >> > Both computers are properly networked using the INTEL NIC cards
and
> > the
> >> >> > Linksys switch that is recommended by Ric at FXTand the network is
> >> >> > functioning properly.
> >> >> >
> >> >> > When I install the FXT program, it prompts a default installation
> > path
> >> > of
> >> >> > C>Program Files>FX Telport.
> >> >> >
> >> >> > If I use this default path, the FXT program doesn't reecognize any
> >> >> > of
> >> >> > my
> >> >> > plugins. If I install it to the directory paths of the VST
plugins,
> >> >> > same
> >> >> > thing.
> >> >> >
> >> >> > Do I need to uninstall my VST plugins, install FXT and then
> >> >> > Reinstall
> >> > the
> >> >> > plugins?
> >> >> >
> >> >> > WTF do I do here?
> >> >> >
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>
> I choose Polesoft Lockspam to fight spam, and you?
> http://www.polesoft.com/refer.html
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66202 is a reply to message #66194] |
Wed, 05 April 2006 21:35 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
If by Symantec you mean Norton firewall, spam/spyware blockers or A/V...
well, good luck with that one man. I swore that crap off back in Win98 days.
Norton sucks, don't make a headache for yourself man. The only thing they
have done right IMO is Ghost. Even Go Back has proven to be a nightmare to
some of my users/family.
AA
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:4434826f$1@linux...
>I had a friend of mine who is a networking guru configure a number of
> machines here in order to deal with some issues that are, as usual,
> complicated by my insistence on doing things *my way*. This has created a
> scenario that FXT does not like. We're going to rethink this tomorrow
> morning. Souldn't be impossible to suss. Certain Symantec issues are
> involved though, so who knows?
>
> Deej
>
> "Aaron Allen" <nospam@not_here.dude> wrote in message
> news:44346f9d@linux...
>> I will be all over this if it pans dude.
>> AA
>>
>>
>> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> news:4433dd0c@linux...
>> > Will do. I've been having some problems getting FXT to work, but I
> believe
>> > I
>> > have determined what the problem is so hopefully I will have time
> tomorrow
>> > to get this resolved.
>> >
>> > Deej
>> >
>> > "Rob Arsenault" <info@studiomanitou.com> wrote in message
>> > news:4433cd85@linux...
>> >> Thanks man, good stuff, please do keep us informed.
>> >>
>> >>
>> >> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> >> news:4433c79c@linux...
>> >> > If Cubase SX PDC works with FXT then I think this will work. Right
> now,
>> > I
>> >> > can use UAD-1 plugins as inserts by sending/returning audio from
> Paris
>> >> > to/from Cubase SX with the UAD-1 cards residing in the Cubase SX
>> > machine.
>> >> > I
>> >> > will be experimenting with installing an FX Teleport *wrapped* UAD-1
>> >> > plugin
>> >> > from the FXT server into an insert in Cubase SX, then
> sending/returning
>> >> > audio from Paris to/from this plugin in Cubase SX.
>> >> >
>> >> > I will probably be posting up about this tomorrow night.
>> >> >
>> >> > Deej
>> >> >
>> >> >
>> >> > "Rob Arsenault" <info@studiomanitou.com> wrote in message
>> >> > news:4433c2a5@linux...
>> >> >> DJ, so does this mean one could have UAD plugs running in real-time
> in
>> >> >> Cubase SX on a second box and have Paris networked to this box via
> TX
>> >> >> teleport therefore allowing for "Auto latency compensation" within
>> > Paris?
>> >> >>
>> >> >> If so, this is awesome news...!!
>> >> >> If not, then back to regular scheduled programming.
>> >> >>
>> >> >> RoB a
>> >> >>
>> >> >>
>> >> >>
>> >> >> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>> >> >> news:443026f4@linux...
>> >> >> > On my cubase SX (host) machine, there are numerous folders where
> VST
>> >> >> > plusgins reside, as follows:
>> >> >> >
>> >> >> > c>Program files>Steinberg>VST Plugins>Powered Plugins
>> >> >> > c>Program files>Steinberg>VST Plugins>Powered Plugins>mono
>> >> >> > c>Program files>Steinberg>Cubase SX3>VST Plugins (and there are
>> >> > subfolders
>> >> >> > in this directory with various plugins)
>> >> >> >
>> >> >> > In my remote server machine, the VST plugins live in directories
>> >> >> > with
>> >> >> > similar names. Cubase SX is not installed on the server, but the
>> >> > directory
>> >> >> > path to the plugins is the same.
>> >> >> >
>> >> >> > Both computers are properly networked using the INTEL NIC cards
> and
>> > the
>> >> >> > Linksys switch that is recommended by Ric at FXTand the network
>> >> >> > is
>> >> >> > functioning properly.
>> >> >> >
>> >> >> > When I install the FXT program, it prompts a default installation
>> > path
>> >> > of
>> >> >> > C>Program Files>FX Telport.
>> >> >> >
>> >> >> > If I use this default path, the FXT program doesn't reecognize
>> >> >> > any
>> >> >> > of
>> >> >> > my
>> >> >> > plugins. If I install it to the directory paths of the VST
> plugins,
>> >> >> > same
>> >> >> > thing.
>> >> >> >
>> >> >> > Do I need to uninstall my VST plugins, install FXT and then
>> >> >> > Reinstall
>> >> > the
>> >> >> > plugins?
>> >> >> >
>> >> >> > WTF do I do here?
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>> I choose Polesoft Lockspam to fight spam, and you?
>> http://www.polesoft.com/refer.html
>>
>>
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66218 is a reply to message #66202] |
Thu, 06 April 2006 08:14 |
Dedric Terry
Messages: 788
Registered: June 2007
|
Senior Member |
|
|
Ditto here - I have Norton Internet Security on one machine for internet
access - sometimes I have to turn it off to ftp files to and from client
servers, depending on the server. I'm also almost positive that's what is
blocking Vegas' network rendering service - works fine between the two
non-AV PCs, when I've had occasion to use it.
Like Aaron said, Norton sucks. A virus would be less of a hog, and it
probably wouldn't care what FXT did. You might be able to get Norton to
allow FXT if you can set a manual rule for it, but I haven't tried. Just
get rid of it where not absolutely necessary.
Regards,
Dedric
On 4/5/06 10:35 PM, in article 44349c59$1@linux, "Aaron Allen"
<nospam@not_here.dude> wrote:
> If by Symantec you mean Norton firewall, spam/spyware blockers or A/V...
> well, good luck with that one man. I swore that crap off back in Win98 days.
> Norton sucks, don't make a headache for yourself man. The only thing they
> have done right IMO is Ghost. Even Go Back has proven to be a nightmare to
> some of my users/family.
>
> AA
>
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:4434826f$1@linux...
>> I had a friend of mine who is a networking guru configure a number of
>> machines here in order to deal with some issues that are, as usual,
>> complicated by my insistence on doing things *my way*. This has created a
>> scenario that FXT does not like. We're going to rethink this tomorrow
>> morning. Souldn't be impossible to suss. Certain Symantec issues are
>> involved though, so who knows?
>>
>> Deej
>>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66219 is a reply to message #66218] |
Thu, 06 April 2006 08:18 |
EK Sound
Messages: 939
Registered: June 2005
|
Senior Member |
|
|
Lets be honest... Norton IS a virus. I would bet my last dollar that
these clowns are the ones writing the Viri in the first place!!
David.
Norton free zone
Dedric Terry wrote:
> Ditto here - I have Norton Internet Security on one machine for internet
> access - sometimes I have to turn it off to ftp files to and from client
> servers, depending on the server. I'm also almost positive that's what is
> blocking Vegas' network rendering service - works fine between the two
> non-AV PCs, when I've had occasion to use it.
>
> Like Aaron said, Norton sucks. A virus would be less of a hog, and it
> probably wouldn't care what FXT did. You might be able to get Norton to
> allow FXT if you can set a manual rule for it, but I haven't tried. Just
> get rid of it where not absolutely necessary.
>
> Regards,
> Dedric
>
> On 4/5/06 10:35 PM, in article 44349c59$1@linux, "Aaron Allen"
> <nospam@not_here.dude> wrote:
>
>
>>If by Symantec you mean Norton firewall, spam/spyware blockers or A/V...
>>well, good luck with that one man. I swore that crap off back in Win98 days.
>>Norton sucks, don't make a headache for yourself man. The only thing they
>>have done right IMO is Ghost. Even Go Back has proven to be a nightmare to
>>some of my users/family.
>>
>>AA
>>
>>
>>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>>news:4434826f$1@linux...
>>
>>>I had a friend of mine who is a networking guru configure a number of
>>>machines here in order to deal with some issues that are, as usual,
>>>complicated by my insistence on doing things *my way*. This has created a
>>>scenario that FXT does not like. We're going to rethink this tomorrow
>>>morning. Souldn't be impossible to suss. Certain Symantec issues are
>>>involved though, so who knows?
>>>
>>>Deej
>>>
>
>
|
|
|
|
| Re: Anyone using FX Teleport here? [message #66233 is a reply to message #66219] |
Thu, 06 April 2006 11:31 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
Norton is only on my office/internet machine. There is a protected folder on
this machine that is accessible to/from my DAWs in the studio. I can DL
program updates from the office and access them from the DAWs and burn MP3's
on the DAWs and access them from from the office machine. There is no AV
software at all on my DAWs.
"EK Sound" <askme@nospam.com> wrote in message news:443532ea$1@linux...
> Lets be honest... Norton IS a virus. I would bet my last dollar that
> these clowns are the ones writing the Viri in the first place!!
>
> David.
> Norton free zone
>
> Dedric Terry wrote:
> > Ditto here - I have Norton Internet Security on one machine for internet
> > access - sometimes I have to turn it off to ftp files to and from client
> > servers, depending on the server. I'm also almost positive that's what
is
> > blocking Vegas' network rendering service - works fine between the two
> > non-AV PCs, when I've had occasion to use it.
> >
> > Like Aaron said, Norton sucks. A virus would be less of a hog, and it
> > probably wouldn't care what FXT did. You might be able to get Norton to
> > allow FXT if you can set a manual rule for it, but I haven't tried.
Just
> > get rid of it where not absolutely necessary.
> >
> > Regards,
> > Dedric
> >
> > On 4/5/06 10:35 PM, in article 44349c59$1@linux, "Aaron Allen"
> > <nospam@not_here.dude> wrote:
> >
> >
> >>If by Symantec you mean Norton firewall, spam/spyware blockers or A/V...
> >>well, good luck with that one man. I swore that crap off back in Win98
days.
> >>Norton sucks, don't make a headache for yourself man. The only thing
they
> >>have done right IMO is Ghost. Even Go Back has proven to be a nightmare
to
> >>some of my users/family.
> >>
> >>AA
> >>
> >>
> >>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >>news:4434826f$1@linux...
> >>
> >>>I had a friend of mine who is a networking guru configure a number of
> >>>machines here in order to deal with some issues that are, as usual,
> >>>complicated by my insistence on doing things *my way*. This has
created a
> >>>scenario that FXT does not like. We're going to rethink this tomorrow
> >>>morning. Souldn't be impossible to suss. Certain Symantec issues are
> >>>involved though, so who knows?
> >>>
> >>>Deej
> >>>
> >
> >
|
|
|
|
Goto Forum:
Current Time: Sun Dec 15 09:49:19 PST 2024
Total time taken to generate the page: 0.01842 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
