The PARIS Forums: PARIS: Main » please help!!!(mec master b )not showing up in 2nd mec

Home » The PARIS Forums » PARIS: Main » please help!!!(mec master b )not showing up in 2nd mec

Show: Today's Messages :: Polls :: Message Navigator

please help!!!(mec master b )not showing up in 2nd mec [message #88015]

Thu, 12 July 2007 19:05

DAVID POSEY

Messages: 19
Registered: December 2005

Junior Member

Hi all,
I am trying to help a friend get his paris system working. The problem that
I am having is that 2nd mec is not showing (mec master b and mec-module b)
in the patchbay. I have tried moving the input card to couple different slots
but this did not help. It's kind of hit and miss sometimes it shows and most
of the time it does not.Have switched mec,s to no avail as well,changed eds
cable and changed eds1000 and have reinstalled software more times than I
want to think about. Any input would be appreciated much
David using xp and paris 3.0

Report message to a moderator

Re: please help!!!(mec master b )not showing up in 2nd mec [message #88016 is a reply to message #88015]

Thu, 12 July 2007 19:23

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

Do you have a (quality) wordclock BNC cable from the master MEC to the 2nd
one?

AA

"David" <crosscreekrecording@hotmail.com> wrote in message
news:4696ddfa$1@linux...
>
> Hi all,
> I am trying to help a friend get his paris system working. The problem
> that
> I am having is that 2nd mec is not showing (mec master b and mec-module b)
> in the patchbay. I have tried moving the input card to couple different
> slots
> but this did not help. It's kind of hit and miss sometimes it shows and
> most
> of the time it does not.Have switched mec,s to no avail as well,changed
> eds
> cable and changed eds1000 and have reinstalled software more times than I
> want to think about. Any input would be appreciated much
> David using xp and paris 3.0

Report message to a moderator

Re: please help!!!(mec master b )not showing up in 2nd mec [message #88017 is a reply to message #88016]

Thu, 12 July 2007 19:54

DAVID POSEY

Messages: 19
Registered: December 2005

Junior Member

Hey Aaron,
It is a new bnc that I had purchased for my own system from morgan, should
be ok. I was wondering about the length of this bnc though it is probably
about 8ft.

"Aaron Allen" <know-spam@not_here.dude> wrote:

>Do you have a (quality) wordclock BNC cable from the master MEC to the 2nd

>one?
>
>AA
>
>"David" <crosscreekrecording@hotmail.com> wrote in message
>news:4696ddfa$1@linux...
>>
>> Hi all,
>> I am trying to help a friend get his paris system working. The problem

>> that
>> I am having is that 2nd mec is not showing (mec master b and mec-module
b)
>> in the patchbay. I have tried moving the input card to couple different

>> slots
>> but this did not help. It's kind of hit and miss sometimes it shows and

>> most
>> of the time it does not.Have switched mec,s to no avail as well,changed

>> eds
>> cable and changed eds1000 and have reinstalled software more times than
I
>> want to think about. Any input would be appreciated much
>> David using xp and paris 3.0
>
>

Report message to a moderator

Re: please help!!!(mec master b )not showing up in 2nd mec [message #88018 is a reply to message #88015]

Thu, 12 July 2007 20:29

Terry T
Messages: 32
Registered: February 2007

Member

"David" <crosscreekrecording@hotmail.com> wrote:
>Try skipping mec b and connect mec c in your global master sometimes on
my system mec b does not work, then check your patchbay to see if mec c shows
up. Hope that helps
>Hi all,
>I am trying to help a friend get his paris system working. The problem that
>I am having is that 2nd mec is not showing (mec master b and mec-module
b)
>in the patchbay. I have tried moving the input card to couple different
slots
>but this did not help. It's kind of hit and miss sometimes it shows and
most
>of the time it does not.Have switched mec,s to no avail as well,changed
eds
>cable and changed eds1000 and have reinstalled software more times than
I
>want to think about. Any input would be appreciated much
>David using xp and paris 3.0

Report message to a moderator

Re: please help!!!(mec master b )not showing up in 2nd mec [message #88019 is a reply to message #88018]

Thu, 12 July 2007 20:46

DAVID POSEY

Messages: 19
Registered: December 2005

Junior Member

Terry, not sure I understand. Are you using 3 eds1000 cards?

"Terry Thomas" <god1stjt@alltel.net> wrote:
>
>"David" <crosscreekrecording@hotmail.com> wrote:
>>Try skipping mec b and connect mec c in your global master sometimes on
>my system mec b does not work, then check your patchbay to see if mec c
shows
>up. Hope that helps
>>Hi all,
>>I am trying to help a friend get his paris system working. The problem
that
>>I am having is that 2nd mec is not showing (mec master b and mec-module
>b)
>>in the patchbay. I have tried moving the input card to couple different
>slots
>>but this did not help. It's kind of hit and miss sometimes it shows and
>most
>>of the time it does not.Have switched mec,s to no avail as well,changed
>eds
>>cable and changed eds1000 and have reinstalled software more times than
>I
>>want to think about. Any input would be appreciated much
>>David using xp and paris 3.0
>

Report message to a moderator

Re: please help!!!(mec master b )not showing up in 2nd mec [message #88022 is a reply to message #88019]

Thu, 12 July 2007 21:05

Terry T
Messages: 32
Registered: February 2007

Member

"david" <crosscreekrecording@hotmail.com> wrote:
>I'am using 4 cards two mecs. How many are you using? How many pci slots
do you have available

>Terry, not sure I understand. Are you using 3 eds1000 cards?
>
>"Terry Thomas" <god1stjt@alltel.net> wrote:
>>
>>"David" <crosscreekrecording@hotmail.com> wrote:
>>>Try skipping mec b and connect mec c in your global master sometimes on
>>my system mec b does not work, then check your patchbay to see if mec c
>shows
>>up. Hope that helps
>>>Hi all,
>>>I am trying to help a friend get his paris system working. The problem
>that
>>>I am having is that 2nd mec is not showing (mec master b and mec-module
>>b)
>>>in the patchbay. I have tried moving the input card to couple different
>>slots
>>>but this did not help. It's kind of hit and miss sometimes it shows and
>>most
>>>of the time it does not.Have switched mec,s to no avail as well,changed
>>eds
>>>cable and changed eds1000 and have reinstalled software more times than
>>I
>>>want to think about. Any input would be appreciated much
>>>David using xp and paris 3.0
>>
>

Report message to a moderator

Re: please help!!!(mec master b )not showing up in 2nd mec [message #88023 is a reply to message #88022]

Thu, 12 July 2007 21:29

Terry T
Messages: 32
Registered: February 2007

Member

"Terry Thomas" <god1stjt@alltel.net> wrote:
>David in your pci slots next to mec A skip mec b and go to your next slot
in most cases would be slot c thats why I asked how many pci slots did you
had available
>"david" <crosscreekrecording@hotmail.com> wrote:
>>I'am using 4 cards two mecs. How many are you using? How many pci slots
>do you have available
>
>>Terry, not sure I understand. Are you using 3 eds1000 cards?
>>
>>"Terry Thomas" <god1stjt@alltel.net> wrote:
>>>
>>>"David" <crosscreekrecording@hotmail.com> wrote:
>>>>Try skipping mec b and connect mec c in your global master sometimes
on
>>>my system mec b does not work, then check your patchbay to see if mec
c
>>shows
>>>up. Hope that helps
>>>>Hi all,
>>>>I am trying to help a friend get his paris system working. The problem
>>that
>>>>I am having is that 2nd mec is not showing (mec master b and mec-module
>>>b)
>>>>in the patchbay. I have tried moving the input card to couple different
>>>slots
>>>>but this did not help. It's kind of hit and miss sometimes it shows and
>>>most
>>>>of the time it does not.Have switched mec,s to no avail as well,changed
>>>eds
>>>>cable and changed eds1000 and have reinstalled software more times than
>>>I
>>>>want to think about. Any input would be appreciated much
>>>>David using xp and paris 3.0
>>>
>>
>

Report message to a moderator

Re: please help!!!(mec master b )not showing up in 2nd mec [message #88038 is a reply to message #88023]

Fri, 13 July 2007 06:06

DAVID POSEY

Messages: 19
Registered: December 2005

Junior Member

Terry, I have 3 pci slots left, that only thing I haven't tried . I'll give
it go thanks

"Terry Thomas" <god1stjt@alltel.net> wrote:
>
>"Terry Thomas" <god1stjt@alltel.net> wrote:
>>David in your pci slots next to mec A skip mec b and go to your next slot
>in most cases would be slot c thats why I asked how many pci slots did
you
>had available
>>"david" <crosscreekrecording@hotmail.com> wrote:
>>>I'am using 4 cards two mecs. How many are you using? How many pci slots
>>do you have available
>>
>>>Terry, not sure I understand. Are you using 3 eds1000 cards?
>>>
>>>"Terry Thomas" <god1stjt@alltel.net> wrote:
>>>>
>>>>"David" <crosscreekrecording@hotmail.com> wrote:
>>>>>Try skipping mec b and connect mec c in your global master sometimes
>on
>>>>my system mec b does not work, then check your patchbay to see if mec
>c
>>>shows
>>>>up. Hope that helps
>>>>>Hi all,
>>>>>I am trying to help a friend get his paris system working. The problem
>>>that
>>>>>I am having is that 2nd mec is not showing (mec master b and mec-module
>>>>b)
>>>>>in the patchbay. I have tried moving the input card to couple different
>>>>slots
>>>>>but this did not help. It's kind of hit and miss sometimes it shows
and
>>>>most
>>>>>of the time it does not.Have switched mec,s to no avail as well,changed
>>>>eds
>>>>>cable and changed eds1000 and have reinstalled software more times than
>>>>I
>>>>>want to think about. Any input would be appreciated much
>>>>>David using xp and paris 3.0
>>>>
>>>
>>
>

Report message to a moderator

Previous Topic:	Need some bass?
Next Topic:	Honda to Discontinue Hybrid Accord Sedan

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 01 11:32:41 PDT 2025

Total time taken to generate the page: 0.01745 seconds