The PARIS Forums


Home » The PARIS Forums » PARIS: Main » Problem with PARIS Launching/Opening (PARIS Won't Open)
Problem with PARIS Launching/Opening [message #107090] Sat, 23 June 2012 14:20 Go to next message
Anonymous   UNITED STATES
I suddenly started having problems with PARIS opening. It has worked fine for years, but now, all other programs on my computer opens except Paris. I deleted the paris.cgi file, then copied the paris.cgi backup file and saved it as paris.cgi and it worked. (I found this technique on the 3.0 CD ROM.) I shut down the computer and tried again the next morning and it stopped working again. I repeated the same procedure above and nothing. Anyone have any tips on how to get this problem resolved? I'm using version 3.0 on Windows XP. I have not changed anything outside of the basic system and so I'm using only 1 card and 1 MEC.

Ray

[Updated on: Sat, 23 June 2012 16:27] by Moderator

Report message to a moderator

Re: Problem with PARIS Launching/Opening [message #107091 is a reply to message #107090] Sat, 23 June 2012 19:53 Go to previous messageGo to next message
kerryg is currently offline  kerryg   CANADA
Messages: 1529
Registered: February 2009
Senior Member
Administrator
I've got nothing myself but while we wait for one of the other users to chime in, PARIS now has a Wiki of its own, give the bugs/troubleshooting section a shot while you wait just in case something jumps off the page at you - and welcome to the PARIS forums, glad you found us! Check out Mike Audet's developments, if you haven't been here yet then prepare for a few surprises Very Happy

"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon

[Updated on: Sat, 23 June 2012 19:53]

Report message to a moderator

Re: Problem with PARIS Launching/Opening [message #107092 is a reply to message #107091] Sun, 24 June 2012 15:43 Go to previous messageGo to next message
Anonymous   UNITED STATES
Thanks! I did check out the trouble shooting section, but I didn't see anything yet. I tried the process that puts a text file in the Paris folder but it didn't work. I'm working on it more tonight.

Thanks for the response. I'm so glad we have a forum for Paris users. Great site!

Ray
Re: Problem with PARIS Launching/Opening [message #107093 is a reply to message #107092] Sun, 24 June 2012 22:16 Go to previous messageGo to next message
Wayne is currently offline  Wayne   UNITED STATES
Messages: 206
Registered: July 2008
Location: Las Vegas
Senior Member
Ray, I've got a couple of ideas.

I understand that PARIS worked before. I don't know if an automatic update screwed things up or not. I don't update my PARIS XP rigs past SP2. I have 2 new fresh XP installs and use an XP SP2 install disc which was mailed to me years ago because I was on dial up.

So with a fresh install of XP and SP2 I then install Paris at C:\PARIS_3. With no second hard drive I put the Paris audio folder at C:\PARIS_AUDIO and projects at C:\Paris projects. Everything right on the C:\ directory.

Some people have had better luck installing the Paris program right on the C:\ because Paris may not be so good with long file names. Remember it's older coding.

1st I create a folder at C:\Paris install. I place the 3 install components in here.

2nd I install the XP drivers and reboot. I check the system folder in the device manager to make sure the scherzo is there and when all goes well it has it's own IRQ.

3rd I install the Paris program to the C:\ prompt as above. And reboot.

4th I install the subsystem and reboot again.

Then before I launch PARIS I open the config in Textpad and change the config to 128, 8192, 128 and 256. I noticed that the install Paris config has very low numbers like 10,2048,128, 256 or something like that. I think I even had a problem on my new installs and changed the config in Textpad and it's worked superbly since. So, this might be your culprit.

I just did 2 new installs this way last week on a backup system and a garage system (video green screen recording mostly, see website below) and both are rock solid. My main rig in my home studio is pretty solid too. All XP machines. On the 2 new machines HyperTreading is disabled in the bios. My studio rig it's enable but I'm also using Mike Audet's drivers here.

I've tweaked every machine to be audio friendly. Turned off all windows enhancements, updating, indexing, hybernation, system restore, firewall, fast user switching, messenger disabled, etc. Disabled all com, lpt, ports not used, etc. Disabled almost all startup items and I don't run anti-virus. The only thing on is the clock in the lower right corner.

I hope some of this helps.
Wayne
Audio-Audition Digital Studios
www.audio-audition.com
Re: Problem with PARIS Launching/Opening [message #107140 is a reply to message #107093] Sat, 14 July 2012 08:41 Go to previous messageGo to next message
Anonymous   UNITED STATES
THANKS WAYNE!! I did try those steps and it worked!! I'm back in business! Thanks so much for the info!! I sure am glad I found this site.

By the way, I just posted a questions about installing a new MEC Expansion Module. Do you know how to install?

Thanks again for your suggestion.

Ray

Re: Problem with PARIS Launching/Opening [message #107145 is a reply to message #107140] Sun, 15 July 2012 11:11 Go to previous message
Wayne is currently offline  Wayne   UNITED STATES
Messages: 206
Registered: July 2008
Location: Las Vegas
Senior Member
You're welcome. I'm glad it worked.
Previous Topic: Digital Noise 2
Next Topic: SMPT
Goto Forum:
  


Current Time: Fri Nov 22 10:54:38 PST 2024

Total time taken to generate the page: 0.02407 seconds