Home » The PARIS Forums » PARIS: Main » Ya know.....this is really strange, but I miss Paris
|
|
| Re: Ya know.....this is really strange, but I miss Paris [message #83205 is a reply to message #83203] |
Mon, 16 April 2007 20:44   |
TCB
Messages: 1261
Registered: July 2007
|
Senior Member |
|
|
9 years on PARIS. What, a couple of months on SX? Imagine nine years with
the same girl. Then you make a break, and three months into your next relationship
you're wondering if it was the right call. Maybe it was, maybe it wasn't,
but you can't even know by now.
Give it time, there's lots of stuff out there. A few of the really 'whoa'
f/x I've found (reverbs in particular) have been with the Creamware card.
So you can think of that as and option as well. If after a year or so you're
still pining for your ex, Morgan will set you back up.
TCB
"DJ" <www.aarrrrggghhh!!!.com> wrote:
>I know I'm nuts. Cubase 4 has every friggin' thing that Paris does not and
>my system sounds great. I went ahead and worked out a deal on that Neve
5042
>so now it's mine and is a permanent fixture here. I have no complaints.
I
>guess that it's just that having used the Paris system for 9 years, I was
so
>comfortable with certain things about it that I didn't think I'd
>miss.....like the plate reverbs. I didn't know I liked them that much.
>Chucks modulation FX sounded great too and NoLimit???....well, it had
>something that nothing that I have here had. I'm able to use anything I
want
>nowadays as a channel insert or on an aux and I can create as many busses
as
>I want ..........and don't have to worry about not being able to patch
>acorss submixes and the Paris mono delays are just wonderful in a mix. It's
>easy to take a lot of things for granted I guess.
>
>Would I go back??...I don't think so..........not now. If I had it to do
all
>over again, would I sell the Paris rig and the insane digital routing matrix
>that was sometimes so confusing and frustrating and full of so many
>potential clocking disasters, but that I knew so well because I had created
>it and was familiar with it's quirks???......I don't think
>so....................not now.
>
>With the Cubase rig......I turn it on....it works.
>
>(yawn)
>
>;o)
>
>
>
|
|
|
|
| Re: Ya know.....this is really strange, but I miss Paris [message #83209 is a reply to message #83205] |
Mon, 16 April 2007 21:21 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
..... I have 2 of his ex's here, they aren't leaving (bought the 2 creamware
cards) and a third on it's way for a tryout (mobo/cpu), heh. Til death (or
connection to a Behringer product) do us.....
Seriously, I'm adoring the Creamware stuff if I can just get enough time off
work to wrap my head around it.
AA
"TCB" <nobody@ishere.com> wrote in message news:46244296$1@linux...
>
> 9 years on PARIS. What, a couple of months on SX? Imagine nine years with
> the same girl. Then you make a break, and three months into your next
> relationship
> you're wondering if it was the right call. Maybe it was, maybe it wasn't,
> but you can't even know by now.
>
> Give it time, there's lots of stuff out there. A few of the really 'whoa'
> f/x I've found (reverbs in particular) have been with the Creamware card.
> So you can think of that as and option as well. If after a year or so
> you're
> still pining for your ex, Morgan will set you back up.
>
> TCB
>
> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>I know I'm nuts. Cubase 4 has every friggin' thing that Paris does not and
>
>>my system sounds great. I went ahead and worked out a deal on that Neve
> 5042
>>so now it's mine and is a permanent fixture here. I have no complaints.
> I
>>guess that it's just that having used the Paris system for 9 years, I was
> so
>>comfortable with certain things about it that I didn't think I'd
>>miss.....like the plate reverbs. I didn't know I liked them that much.
>>Chucks modulation FX sounded great too and NoLimit???....well, it had
>>something that nothing that I have here had. I'm able to use anything I
> want
>>nowadays as a channel insert or on an aux and I can create as many busses
> as
>>I want ..........and don't have to worry about not being able to patch
>>acorss submixes and the Paris mono delays are just wonderful in a mix.
>>It's
>
>>easy to take a lot of things for granted I guess.
>>
>>Would I go back??...I don't think so..........not now. If I had it to do
> all
>>over again, would I sell the Paris rig and the insane digital routing
>>matrix
>
>>that was sometimes so confusing and frustrating and full of so many
>>potential clocking disasters, but that I knew so well because I had
>>created
>
>>it and was familiar with it's quirks???......I don't think
>>so....................not now.
>>
>>With the Cubase rig......I turn it on....it works.
>>
>>(yawn)
>>
>>;o)
>>
>>
>>
>
|
|
|
|
| Re: Ya know.....this is really strange, but I miss Paris [message #83211 is a reply to message #83203] |
Mon, 16 April 2007 22:02 |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
And if you had been in a wheelchair for a number of years, then
all of sudden be able to walk again, you'd probably miss that
chair for certain things, too (like in your case, being able to
harness the dogs up to it & have your own version of the
Ititarod sled race), but in the end isn't it nicer to be able
to just take off running whenever you want to?
Neil
"DJ" <www.aarrrrggghhh!!!.com> wrote:
>I know I'm nuts. Cubase 4 has every friggin' thing that Paris does not and
>my system sounds great. I went ahead and worked out a deal on that Neve
5042
>so now it's mine and is a permanent fixture here. I have no complaints.
I
>guess that it's just that having used the Paris system for 9 years, I was
so
>comfortable with certain things about it that I didn't think I'd
>miss.....like the plate reverbs. I didn't know I liked them that much.
>Chucks modulation FX sounded great too and NoLimit???....well, it had
>something that nothing that I have here had. I'm able to use anything I
want
>nowadays as a channel insert or on an aux and I can create as many busses
as
>I want ..........and don't have to worry about not being able to patch
>acorss submixes and the Paris mono delays are just wonderful in a mix. It's
>easy to take a lot of things for granted I guess.
>
>Would I go back??...I don't think so..........not now. If I had it to do
all
>over again, would I sell the Paris rig and the insane digital routing matrix
>that was sometimes so confusing and frustrating and full of so many
>potential clocking disasters, but that I knew so well because I had created
>it and was familiar with it's quirks???......I don't think
>so....................not now.
>
>With the Cubase rig......I turn it on....it works.
>
>(yawn)
>
>;o)
>
>
>
|
|
|
|
|
|
| Re: Ya know.....this is really strange, but I miss Paris [message #83229 is a reply to message #83205] |
Tue, 17 April 2007 00:17 |
Deej [4]
Messages: 1292
Registered: January 2007
|
Senior Member |
|
|
The reverbs were the first thing I noiced when I got my Pulsar cards. In
fact, right after I got mine, I think I posted something here about how I
thought that the Pulsar II card would be worth the price just for the
reverbs. I's still liking the RME cards quite a bit though. The new drivers
are very good.
BTW....sorta' OT but I'm gonna be recording some lap steel OD's tomorrow
night using my Lexicon 284 and the stereo cab with a '57 on one cone and an
sE ribbon on the other. The cab will be isolated in my Eckel Industries
audiologist booth (like an anechoc chamber). The direct outs of the amp will
probably be used simultaneously as well and I'll likely split the guiitar
output to a Radial Tonebone and send one of the leads to my POD for a
different tone.
Should be interesting.
"TCB" <nobody@ishere.com> wrote in message news:46244296$1@linux...
>
> 9 years on PARIS. What, a couple of months on SX? Imagine nine years with
> the same girl. Then you make a break, and three months into your next
> relationship
> you're wondering if it was the right call. Maybe it was, maybe it wasn't,
> but you can't even know by now.
>
> Give it time, there's lots of stuff out there. A few of the really 'whoa'
> f/x I've found (reverbs in particular) have been with the Creamware card.
> So you can think of that as and option as well. If after a year or so
> you're
> still pining for your ex, Morgan will set you back up.
>
> TCB
>
> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>I know I'm nuts. Cubase 4 has every friggin' thing that Paris does not and
>
>>my system sounds great. I went ahead and worked out a deal on that Neve
> 5042
>>so now it's mine and is a permanent fixture here. I have no complaints.
> I
>>guess that it's just that having used the Paris system for 9 years, I was
> so
>>comfortable with certain things about it that I didn't think I'd
>>miss.....like the plate reverbs. I didn't know I liked them that much.
>>Chucks modulation FX sounded great too and NoLimit???....well, it had
>>something that nothing that I have here had. I'm able to use anything I
> want
>>nowadays as a channel insert or on an aux and I can create as many busses
> as
>>I want ..........and don't have to worry about not being able to patch
>>acorss submixes and the Paris mono delays are just wonderful in a mix.
>>It's
>
>>easy to take a lot of things for granted I guess.
>>
>>Would I go back??...I don't think so..........not now. If I had it to do
> all
>>over again, would I sell the Paris rig and the insane digital routing
>>matrix
>
>>that was sometimes so confusing and frustrating and full of so many
>>potential clocking disasters, but that I knew so well because I had
>>created
>
>>it and was familiar with it's quirks???......I don't think
>>so....................not now.
>>
>>With the Cubase rig......I turn it on....it works.
>>
>>(yawn)
>>
>>;o)
>>
>>
>>
>
-
Attachment: Eckel.lnk
(Size: 0.70KB, Downloaded 48 times)
|
|
|
|
|
|
| Re: Ya know.....this is really strange, but I miss Paris [message #83239 is a reply to message #83229] |
Tue, 17 April 2007 06:21 |
TCB
Messages: 1261
Registered: July 2007
|
Senior Member |
|
|
That does sound like some interesting geetar tracking. Since I've just gone
back (after many, many years as a Top Hat monogamist I"m now a Savage polygamist)
to a two amp setup I'm not sure how I'm going to record Monkie guitars. When
I was a one amp guy I was going to go with the pure Steve Albini approach,
one bright mic and one dark mic, both roughly a foot off the cab, pointed
right at the cone. Now do close mic each cab with a bright/dark mic? Move
the two mics I was planning on using back a few inches? Pick one amp per
overdub but use the pair live? More testing to do.
Here's an odd one. I think drummer should have to justify, in writing, every
time they hit a tom, because they hit them a lot less. This assumes, of course,
the drummers can write, so I might be starting from false assumptions, but
I just think toms get in the way and that fills should be Charlie Watts/Al
Jackson kick/snare/cymbal things. However, our drummer uses toms quite a
bit so we were doing some testing on mics. We tried four mics, a 57, a Rode
NT5, an AKG 412, and a Behringer pencil condenser that I think cost less
than $150 for the pair. I wouldn't be telling this story if the Behringer
didn't win. It has a tighter pattern so there's less extraneous trash (the
NT5 had by far the most trash) and the tom sounded just fine through it.
So Behringer it is, and that frees up the pair of NT5s to do other jobs.
TCB
"DJ" <www.aarrrrggghhh!!!.com> wrote:
>The reverbs were the first thing I noiced when I got my Pulsar cards. In
>fact, right after I got mine, I think I posted something here about how
I
>thought that the Pulsar II card would be worth the price just for the
>reverbs. I's still liking the RME cards quite a bit though. The new drivers
>are very good.
>
>
>BTW....sorta' OT but I'm gonna be recording some lap steel OD's tomorrow
>night using my Lexicon 284 and the stereo cab with a '57 on one cone and
an
>sE ribbon on the other. The cab will be isolated in my Eckel Industries
>audiologist booth (like an anechoc chamber). The direct outs of the amp
will
>probably be used simultaneously as well and I'll likely split the guiitar
>output to a Radial Tonebone and send one of the leads to my POD for a
>different tone.
>
>Should be interesting.
>
>
>"TCB" <nobody@ishere.com> wrote in message news:46244296$1@linux...
>>
>> 9 years on PARIS. What, a couple of months on SX? Imagine nine years with
>> the same girl. Then you make a break, and three months into your next
>> relationship
>> you're wondering if it was the right call. Maybe it was, maybe it wasn't,
>> but you can't even know by now.
>>
>> Give it time, there's lots of stuff out there. A few of the really 'whoa'
>> f/x I've found (reverbs in particular) have been with the Creamware card.
>> So you can think of that as and option as well. If after a year or so
>> you're
>> still pining for your ex, Morgan will set you back up.
>>
>> TCB
>>
>> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>>I know I'm nuts. Cubase 4 has every friggin' thing that Paris does not
and
>>
>>>my system sounds great. I went ahead and worked out a deal on that Neve
>> 5042
>>>so now it's mine and is a permanent fixture here. I have no complaints.
>> I
>>>guess that it's just that having used the Paris system for 9 years, I
was
>> so
>>>comfortable with certain things about it that I didn't think I'd
>>>miss.....like the plate reverbs. I didn't know I liked them that much.
>>>Chucks modulation FX sounded great too and NoLimit???....well, it had
>>>something that nothing that I have here had. I'm able to use anything
I
>> want
>>>nowadays as a channel insert or on an aux and I can create as many busses
>> as
>>>I want ..........and don't have to worry about not being able to patch
>>>acorss submixes and the Paris mono delays are just wonderful in a mix.
>>>It's
>>
>>>easy to take a lot of things for granted I guess.
>>>
>>>Would I go back??...I don't think so..........not now. If I had it to
do
>> all
>>>over again, would I sell the Paris rig and the insane digital routing
>>>matrix
>>
>>>that was sometimes so confusing and frustrating and full of so many
>>>potential clocking disasters, but that I knew so well because I had
>>>created
>>
>>>it and was familiar with it's quirks???......I don't think
>>>so....................not now.
>>>
>>>With the Cubase rig......I turn it on....it works.
>>>
>>>(yawn)
>>>
>>>;o)
>>>
>>>
>>>
>>
>
>
>
|
|
|
|
|
|
|
|
| Re: Ya know.....this is really strange, but I miss Paris [message #83265 is a reply to message #83239] |
Tue, 17 April 2007 09:18 |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
Thadster, if you're still in "gear acquisition mode",
try a B.L.U.E. Ball and/or an Audix i5 fer yer guitar amp, and
some Audix D3's or 4's for your toms.
Neil
"TCB" <nobody@ishere.com> wrote:
>
>That does sound like some interesting geetar tracking. Since I've just gone
>back (after many, many years as a Top Hat monogamist I"m now a Savage polygamist)
>to a two amp setup I'm not sure how I'm going to record Monkie guitars.
When
>I was a one amp guy I was going to go with the pure Steve Albini approach,
>one bright mic and one dark mic, both roughly a foot off the cab, pointed
>right at the cone. Now do close mic each cab with a bright/dark mic? Move
>the two mics I was planning on using back a few inches? Pick one amp per
>overdub but use the pair live? More testing to do.
>
>Here's an odd one. I think drummer should have to justify, in writing, every
>time they hit a tom, because they hit them a lot less. This assumes, of
course,
>the drummers can write, so I might be starting from false assumptions, but
>I just think toms get in the way and that fills should be Charlie Watts/Al
>Jackson kick/snare/cymbal things. However, our drummer uses toms quite a
>bit so we were doing some testing on mics. We tried four mics, a 57, a Rode
>NT5, an AKG 412, and a Behringer pencil condenser that I think cost less
>than $150 for the pair. I wouldn't be telling this story if the Behringer
>didn't win. It has a tighter pattern so there's less extraneous trash (the
>NT5 had by far the most trash) and the tom sounded just fine through it.
>So Behringer it is, and that frees up the pair of NT5s to do other jobs.
>
>
>TCB
>
>"DJ" <www.aarrrrggghhh!!!.com> wrote:
>>The reverbs were the first thing I noiced when I got my Pulsar cards. In
>
>>fact, right after I got mine, I think I posted something here about how
>I
>>thought that the Pulsar II card would be worth the price just for the
>>reverbs. I's still liking the RME cards quite a bit though. The new drivers
>
>>are very good.
>>
>>
>>BTW....sorta' OT but I'm gonna be recording some lap steel OD's tomorrow
>
>>night using my Lexicon 284 and the stereo cab with a '57 on one cone and
>an
>>sE ribbon on the other. The cab will be isolated in my Eckel Industries
>
>>audiologist booth (like an anechoc chamber). The direct outs of the amp
>will
>>probably be used simultaneously as well and I'll likely split the guiitar
>
>>output to a Radial Tonebone and send one of the leads to my POD for a
>>different tone.
>>
>>Should be interesting.
>>
>>
>>"TCB" <nobody@ishere.com> wrote in message news:46244296$1@linux...
>>>
>>> 9 years on PARIS. What, a couple of months on SX? Imagine nine years
with
>>> the same girl. Then you make a break, and three months into your next
>
>>> relationship
>>> you're wondering if it was the right call. Maybe it was, maybe it wasn't,
>>> but you can't even know by now.
>>>
>>> Give it time, there's lots of stuff out there. A few of the really 'whoa'
>>> f/x I've found (reverbs in particular) have been with the Creamware card.
>>> So you can think of that as and option as well. If after a year or so
>
>>> you're
>>> still pining for your ex, Morgan will set you back up.
>>>
>>> TCB
>>>
>>> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>>>I know I'm nuts. Cubase 4 has every friggin' thing that Paris does not
>and
>>>
>>>>my system sounds great. I went ahead and worked out a deal on that Neve
>>> 5042
>>>>so now it's mine and is a permanent fixture here. I have no complaints.
>>> I
>>>>guess that it's just that having used the Paris system for 9 years, I
>was
>>> so
>>>>comfortable with certain things about it that I didn't think I'd
>>>>miss.....like the plate reverbs. I didn't know I liked them that much.
>>>>Chucks modulation FX sounded great too and NoLimit???....well, it had
>>>>something that nothing that I have here had. I'm able to use anything
>I
>>> want
>>>>nowadays as a channel insert or on an aux and I can create as many busses
>>> as
>>>>I want ..........and don't have to worry about not being able to patch
>>>>acorss submixes and the Paris mono delays are just wonderful in a mix.
>
>>>>It's
>>>
>>>>easy to take a lot of things for granted I guess.
>>>>
>>>>Would I go back??...I don't think so..........not now. If I had it to
>do
>>> all
>>>>over again, would I sell the Paris rig and the insane digital routing
>
>>>>matrix
>>>
>>>>that was sometimes so confusing and frustrating and full of so many
>>>>potential clocking disasters, but that I knew so well because I had
>>>>created
>>>
>>>>it and was familiar with it's quirks???......I don't think
>>>>so....................not now.
>>>>
>>>>With the Cubase rig......I turn it on....it works.
>>>>
>>>>(yawn)
>>>>
>>>>;o)
>>>>
>>>>
>>>>
>>>
>>
>>
>>
>
|
|
|
|
|
|
| Re: Ya know.....this is really strange, but I miss Paris [message #83291 is a reply to message #83289] |
Tue, 17 April 2007 18:09 |
Deej [4]
Messages: 1292
Registered: January 2007
|
Senior Member |
|
|
You really should try it. You will gain at least 3.5Khz on the top
end, -6db lower noise levels and an extra 14db
of dynamic range
hehehe!!
"Neil" <OIUIOU@OIU.com> wrote in message news:46256bc0$1@linux...
>
> Kewl, thanks - I may give 'em a whirl this weekend.
>
> Neil
>
> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>Yes.....they are definitely for the Multiface.
>>
>>Back up your system and give them a spin. You will have to do a firmware
>
>>update for your PCI card so make sure you know where your old firmware
>>flash
>
>>is located, just in case.
>>
>>
>>;o)
>>
>>
>>"Neil" <OIUO@OIU.om> wrote in message news:4624d15a$1@linux...
>>>
>>> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>>>The reverbs were the first thing I noiced when I got my Pulsar cards.
> In
>>>
>>>>fact, right after I got mine, I think I posted something here about how
>>> I
>>>>thought that the Pulsar II card would be worth the price just for the
>>>>reverbs. I's still liking the RME cards quite a bit though. The new
>>>>drivers
>>>
>>>>are very good.
>>>
>>> Deej, I never did try those RME beta drivers you posted that
>>> link for, because it occurred to me after I downloaded them...
>>> those aren't for the Multiface, are they (or ARE they?)
>>>
>>>
>>>>BTW....sorta' OT but I'm gonna be recording some lap steel OD's tomorrow
>>>
>>>>night using my Lexicon 284 and the stereo cab with a '57 on one cone and
>>> an
>>>>sE ribbon on the other. The cab will be isolated in my Eckel Industries
>>>
>>>>audiologist booth (like an anechoc chamber). The direct outs of the amp
>>> will
>>>>probably be used simultaneously as well and I'll likely split the
>>>>guiitar
>>>
>>>>output to a Radial Tonebone and send one of the leads to my POD for a
>>>>different tone.
>>>
>>> Four tracks for a single pass of lap steel?
>>>
>>> Don't forget to double it afterwards.
>>>
>>> :D
>>
>>
>
|
|
|
|
|
|
| Re: Ya know.....this is really strange, but I miss Paris [message #83294 is a reply to message #83291] |
Tue, 17 April 2007 18:40 |
Nil
Messages: 245
Registered: March 2007
|
Senior Member |
|
|
Good; that, plus my no-patchbay approach should put me well into
high-end frequency ranges that are on the verge of violating FCC
regulations due to interfering with microwave transmitters;
noise levels so low that passing extraterrestrials avoid
getting within 100 light years of my convertors because they
think it's a black hole, and dynamic ranges that will cause
mile-long icebergs to calve off the coast of Antarctica.
I should be relatively happy with that kind of performance for
awhile.
:)
"DJ" <www.aarrrrggghhh!!!.com> wrote:
>You really should try it. You will gain at least 3.5Khz on the top
>end, -6db lower noise levels and an extra 14db
>of dynamic range
>
>hehehe!!
>
>"Neil" <OIUIOU@OIU.com> wrote in message news:46256bc0$1@linux...
>>
>> Kewl, thanks - I may give 'em a whirl this weekend.
>>
>> Neil
>>
>> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>>Yes.....they are definitely for the Multiface.
>>>
>>>Back up your system and give them a spin. You will have to do a firmware
>>
>>>update for your PCI card so make sure you know where your old firmware
>>>flash
>>
>>>is located, just in case.
>>>
>>>
>>>;o)
>>>
>>>
>>>"Neil" <OIUO@OIU.om> wrote in message news:4624d15a$1@linux...
>>>>
>>>> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>>>>The reverbs were the first thing I noiced when I got my Pulsar cards.
>> In
>>>>
>>>>>fact, right after I got mine, I think I posted something here about
how
>>>> I
>>>>>thought that the Pulsar II card would be worth the price just for the
>>>>>reverbs. I's still liking the RME cards quite a bit though. The new
>>>>>drivers
>>>>
>>>>>are very good.
>>>>
>>>> Deej, I never did try those RME beta drivers you posted that
>>>> link for, because it occurred to me after I downloaded them...
>>>> those aren't for the Multiface, are they (or ARE they?)
>>>>
>>>>
>>>>>BTW....sorta' OT but I'm gonna be recording some lap steel OD's tomorrow
>>>>
>>>>>night using my Lexicon 284 and the stereo cab with a '57 on one cone
and
>>>> an
>>>>>sE ribbon on the other. The cab will be isolated in my Eckel Industries
>>>>
>>>>>audiologist booth (like an anechoc chamber). The direct outs of the
amp
>>>> will
>>>>>probably be used simultaneously as well and I'll likely split the
>>>>>guiitar
>>>>
>>>>>output to a Radial Tonebone and send one of the leads to my POD for
a
>>>>>different tone.
>>>>
>>>> Four tracks for a single pass of lap steel?
>>>>
>>>> Don't forget to double it afterwards.
>>>>
>>>> :D
>>>
>>>
>>
>
>
|
|
|
|
Goto Forum:
Current Time: Tue Oct 15 02:28:17 PDT 2024
Total time taken to generate the page: 0.01508 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
