The PARIS Forums: PARIS: Main » Tubes for Atomic Reactor guitar amp

Home » The PARIS Forums » PARIS: Main » Tubes for Atomic Reactor guitar amp

Show: Today's Messages :: Polls :: Message Navigator

Tubes for Atomic Reactor guitar amp [message #99607]

Mon, 21 July 2008 14:56

Wayne

Messages: 206
Registered: July 2008
Location: Las Vegas

Senior Member

Hi gang,

I'm looking for recommendations on tube brands for my guitar amp.

I use the Atomic Reactor AR112-50. This is a modeling amp with a tuned
speaker and cabinet. No preamp section. The POD is the preamp. This amp is
designed to be neutral in tone so that any digital amp/cabinet modeling
scenario in the POD or floorboard is accurately reproduced and warm'd with
tubes. The POD plugs directly in the power amp. It has two 6L6GC for
power and a 12AX7 (phase inverter).

Is there a difference between a 6L6GC and a premium JJ 6L6?
Is there a difference between a 12AX7 and a 12AX7A?
Any recommendation on a brand for mid/top quality clear and clean neutral
tone? The 6L6 should be a matched set.

I use the Line6 Variax guitar and use Tele, Strat, LP and acoustic models.
The LesPaul and acoustic models carry a lot of low mids and I notice the amp
seems to break up when I pick or strum the 3 low strings when at stage
volume. The tubes have 1-1/2 years on them and roughly 500 hours of use.

On a slightly off topic, does the feedback sounds or tones come from the POD
or is it a function of the amp's phase inverter and power tubes? I always
thought that it was a function of the guitar pickups and the sound from the
speakers being reinserted back into the guitar pickup. But the Variax has a
strange pickup. The pickup is in the bridge (where the string actually
touches, much like acoustics) yet I am able to turn towards the amp and
still get the traditional feedback loop thing going on. I don't get it. Is
it possible to continue to get tubes that don't break up but still offer the
feedback loop, or is it a compromise?

Any thoughts or recommendations would be appreciated. Sorry for all the
questions.

Thanks,
Wayne
Paris since '97

Report message to a moderator

Re: Tubes for Atomic Reactor guitar amp [message #99611 is a reply to message #99607]

Tue, 22 July 2008 08:01

John [1]
Messages: 2229
Registered: September 2005

Senior Member

I just got the 212 for $400 from a guy at work. awesome amp. you should
call Tom at Atomic, he would probably have some great advice for you.

john

Report message to a moderator

Re: Tubes for Atomic Reactor guitar amp [message #99612 is a reply to message #99611]

Tue, 22 July 2008 09:36

Wayne

Messages: 206
Registered: July 2008
Location: Las Vegas

Senior Member

John,
I'm sure the 212 has a huge sound. Although the 112 is rated at 200w it may
be the speaker that breaks up a bit with the low strings at stage volume.
After all it is a single 12" doing the job.

wayne

"John" <no@no.com> wrote in message news:4885f63b$1@linux...
>
> I just got the 212 for $400 from a guy at work. awesome amp. you should
> call Tom at Atomic, he would probably have some great advice for you.
>
> john

Report message to a moderator

Re: Tubes for Atomic Reactor guitar amp [message #99623 is a reply to message #99607]

Wed, 23 July 2008 04:30

John [1]
Messages: 2229
Registered: September 2005

Senior Member

That amp should not be breaking up. Are you sure you're not overdriving the
Input to it? Crank the amp up full and then slowly turn the output of your
POD up to find the point where it breaks up.

Report message to a moderator

Re: Tubes for Atomic Reactor guitar amp [message #99650 is a reply to message #99623]

Thu, 24 July 2008 07:20

tonehouse

Messages: 184
Registered: July 2006

Senior Member

Every individual tube has a slightly different sound..I have a tech who
tests my tubes for me,and rates them. I have 30 year old tubes that are
great,and new ones that suck...
"John" <no@no.com> wrote in message news:48871648$1@linux...
>
> That amp should not be breaking up. Are you sure you're not overdriving
the
> Input to it? Crank the amp up full and then slowly turn the output of
your
> POD up to find the point where it breaks up.

Report message to a moderator

Re: Tubes for Atomic Reactor guitar amp [message #99723 is a reply to message #99623]

Mon, 28 July 2008 13:56

Wayne

Messages: 206
Registered: July 2008
Location: Las Vegas

Senior Member

Thanks John. I just got back into town and just now getting to the
newsgroup. I run the POD full open but have the individual patches back'd
off, so this may in fact be what is the problem. I finger pick an acoustic
patch which is the queitest so all other patches are balanced with that one.
I will try backing off the output level. Thanks for the possible fix.

Wayne

"John" <no@no.com> wrote in message news:48871648$1@linux...
>
> That amp should not be breaking up. Are you sure you're not overdriving
> the
> Input to it? Crank the amp up full and then slowly turn the output of
> your
> POD up to find the point where it breaks up.

Report message to a moderator

Previous Topic:	micrphones . . .
Next Topic:	Problem loading up 3.0

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 01 12:49:28 PDT 2025

Total time taken to generate the page: 0.02822 seconds