|
|
|
|
| Re: Paris Configuration settings [message #79423 is a reply to message #79422] |
Fri, 02 February 2007 14:28   |
RZ
Messages: 61
Registered: July 2005
|
Member |
|
|
Thanks John,
There's a whole lot of interesting info on that site. I still don't know
what a manual punch delay is, but I think it being set to short was my
problem. Easy fix. Thanks again.
"John" <no@no.com> wrote in message news:45c3b574$1@linux...
>
> Some samples are under Setup / paris.cfg at http://www.kfocus.com/paris/
> Also, set your punch in to medium or long
>
> "RZ" <pearlmusic@sbcglobal.net> wrote:
>>I should probably know this since I've been using Paris for almost 8
>>years,
>
>>but can anyone enlighten me on ideal configuration settings (disk I/O,
>>disk
>
>>cache size)? Are there any issues with standard format NTFS drives? I've
>
>>been using a 3 card system on XP for a couple years and now use the
>>Seagate
>
>>drives with 16MB cache, but still have problems doing punches with more
> than
>>2 tracks. I always get the pesky "data could not be streamed fast enough,
>
>>set playback for a slower machine", message as the playback chokes. It
>
>>seems I got better performance years ago on a Pentium II. And what the
> heck
>>is a manual punch delay? Any input would be much appreciated, thanks.
>>Richard
>>
>>
>>
>>
>
|
|
|
|
| Re: Paris Configuration settings [message #79427 is a reply to message #79423] |
Fri, 02 February 2007 16:21 |
John [1]
Messages: 2229
Registered: September 2005
|
Senior Member |
|
|
I think it means when you do a punch by pressing record while in play or by
enabling through the jack on the back of the C16 that Paris will have a slight
delay before the punch happens and this setting deterimes that. For a screaming
pc with nothing going in short would work. Medium and long have been most
popular though and if you just pick long you can always slide the ends of
the track to adjust it to be just right after the recording is done.
"RZ" <pearlmusic@sbcglobal.net> wrote:
>Thanks John,
>There's a whole lot of interesting info on that site. I still don't know
>what a manual punch delay is, but I think it being set to short was my
>problem. Easy fix. Thanks again.
>
>
>"John" <no@no.com> wrote in message news:45c3b574$1@linux...
>>
>> Some samples are under Setup / paris.cfg at http://www.kfocus.com/paris/
>> Also, set your punch in to medium or long
>>
>> "RZ" <pearlmusic@sbcglobal.net> wrote:
>>>I should probably know this since I've been using Paris for almost 8
>>>years,
>>
>>>but can anyone enlighten me on ideal configuration settings (disk I/O,
>>>disk
>>
>>>cache size)? Are there any issues with standard format NTFS drives?
I've
>>
>>>been using a 3 card system on XP for a couple years and now use the
>>>Seagate
>>
>>>drives with 16MB cache, but still have problems doing punches with more
>> than
>>>2 tracks. I always get the pesky "data could not be streamed fast enough,
>>
>>>set playback for a slower machine", message as the playback chokes. It
>>
>>>seems I got better performance years ago on a Pentium II. And what the
>> heck
>>>is a manual punch delay? Any input would be much appreciated, thanks.
>>>Richard
>>>
>>>
>>>
>>>
>>
>
>
|
|
|
|
| Re: Paris Configuration settings [message #79428 is a reply to message #79423] |
Fri, 02 February 2007 15:20 |
Aaron Allen
Messages: 1988
Registered: May 2008
|
Senior Member |
|
|
It has to do with record ready buffer.. short delay means the time between
when you hit 'record' and when it actually starts to record is a shorter
time than say medium or long. On a smaller EDS system, short is cool but get
past a 2 or 3 card system and things start getting a little whacky. Besides,
Paris' punch isn't exactly super tight so generally you'll end up punching a
little early and peeling back in the editor anyway.
AA
"RZ" <pearlmusic@sbcglobal.net> wrote in message news:45c3bb7b$1@linux...
> Thanks John,
> There's a whole lot of interesting info on that site. I still don't know
> what a manual punch delay is, but I think it being set to short was my
> problem. Easy fix. Thanks again.
>
>
> "John" <no@no.com> wrote in message news:45c3b574$1@linux...
>>
>> Some samples are under Setup / paris.cfg at
>> http://www.kfocus.com/paris/
>> Also, set your punch in to medium or long
>>
>> "RZ" <pearlmusic@sbcglobal.net> wrote:
>>>I should probably know this since I've been using Paris for almost 8
>>>years,
>>
>>>but can anyone enlighten me on ideal configuration settings (disk I/O,
>>>disk
>>
>>>cache size)? Are there any issues with standard format NTFS drives?
>>>I've
>>
>>>been using a 3 card system on XP for a couple years and now use the
>>>Seagate
>>
>>>drives with 16MB cache, but still have problems doing punches with more
>> than
>>>2 tracks. I always get the pesky "data could not be streamed fast
>>>enough,
>>
>>>set playback for a slower machine", message as the playback chokes. It
>>
>>>seems I got better performance years ago on a Pentium II. And what the
>> heck
>>>is a manual punch delay? Any input would be much appreciated, thanks.
>>>Richard
>>>
>>>
>>>
>>>
>>
>
>
|
|
|
|
| Re: Paris Configuration settings [message #79432 is a reply to message #79428] |
Fri, 02 February 2007 19:56 |
John Macy
Messages: 242
Registered: April 2006
|
Senior Member |
|
|
Also for me, doing a bunch of tracks like a drum punch,
using autopunch works a whole lot better than manual...
"Aaron Allen" <know-spam@not_here.dude> wrote:
>It has to do with record ready buffer.. short delay means the time between
>when you hit 'record' and when it actually starts to record is a shorter
>time than say medium or long. On a smaller EDS system, short is cool but
get
>past a 2 or 3 card system and things start getting a little whacky. Besides,
>Paris' punch isn't exactly super tight so generally you'll end up punching
a
>little early and peeling back in the editor anyway.
>
>AA
>
>"RZ" <pearlmusic@sbcglobal.net> wrote in message news:45c3bb7b$1@linux...
>> Thanks John,
>> There's a whole lot of interesting info on that site. I still don't know
>> what a manual punch delay is, but I think it being set to short was my
>> problem. Easy fix. Thanks again.
>>
>>
>> "John" <no@no.com> wrote in message news:45c3b574$1@linux...
>>>
>>> Some samples are under Setup / paris.cfg at
>>> http://www.kfocus.com/paris/
>>> Also, set your punch in to medium or long
>>>
>>> "RZ" <pearlmusic@sbcglobal.net> wrote:
>>>>I should probably know this since I've been using Paris for almost 8
>>>>years,
>>>
>>>>but can anyone enlighten me on ideal configuration settings (disk I/O,
>>>>disk
>>>
>>>>cache size)? Are there any issues with standard format NTFS drives?
>>>>I've
>>>
>>>>been using a 3 card system on XP for a couple years and now use the
>>>>Seagate
>>>
>>>>drives with 16MB cache, but still have problems doing punches with more
>>> than
>>>>2 tracks. I always get the pesky "data could not be streamed fast
>>>>enough,
>>>
>>>>set playback for a slower machine", message as the playback chokes.
It
>>>
>>>>seems I got better performance years ago on a Pentium II. And what the
>>> heck
>>>>is a manual punch delay? Any input would be much appreciated, thanks.
>>>>Richard
>>>>
>>>>
>>>>
>>>>
>>>
>>
>>
>
>
|
|
|
|
|
|
| Re: Paris Configuration settings [message #79449 is a reply to message #79427] |
Sat, 03 February 2007 17:17 |
Rob Arsenault
Messages: 152
Registered: September 2005
|
Senior Member |
|
|
One thing I noticed and could reproduce while tracking drums last week was
that Paris will punchin better and not show its ugly "data could not be
streamed...yadayada error" as much if you clear all takes/splices after the
now line on the tracks being recorded. Must be a HD seek / through-put
issues.
3 card sys on ME, 1.4Gig Athlon
Rob
"john" <no@no.com> wrote in message news:45c3c777$1@linux...
>
> I think it means when you do a punch by pressing record while in play or
> by
> enabling through the jack on the back of the C16 that Paris will have a
> slight
> delay before the punch happens and this setting deterimes that. For a
> screaming
> pc with nothing going in short would work. Medium and long have been most
> popular though and if you just pick long you can always slide the ends of
> the track to adjust it to be just right after the recording is done.
>
> "RZ" <pearlmusic@sbcglobal.net> wrote:
>>Thanks John,
>>There's a whole lot of interesting info on that site. I still don't know
>
>>what a manual punch delay is, but I think it being set to short was my
>>problem. Easy fix. Thanks again.
>>
>>
>>"John" <no@no.com> wrote in message news:45c3b574$1@linux...
>>>
>>> Some samples are under Setup / paris.cfg at
>>> http://www.kfocus.com/paris/
>>> Also, set your punch in to medium or long
>>>
>>> "RZ" <pearlmusic@sbcglobal.net> wrote:
>>>>I should probably know this since I've been using Paris for almost 8
>>>>years,
>>>
>>>>but can anyone enlighten me on ideal configuration settings (disk I/O,
>
>>>>disk
>>>
>>>>cache size)? Are there any issues with standard format NTFS drives?
> I've
>>>
>>>>been using a 3 card system on XP for a couple years and now use the
>>>>Seagate
>>>
>>>>drives with 16MB cache, but still have problems doing punches with more
>>> than
>>>>2 tracks. I always get the pesky "data could not be streamed fast
>>>>enough,
>>>
>>>>set playback for a slower machine", message as the playback chokes. It
>>>
>>>>seems I got better performance years ago on a Pentium II. And what the
>>> heck
>>>>is a manual punch delay? Any input would be much appreciated, thanks.
>>>>Richard
>>>>
>>>>
>>>>
>>>>
>>>
>>
>>
>
|
|
|
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
