Home » The PARIS Forums » PARIS: Main » DJ your thoughts on Mojave vs. Se Gemini
|
|
| Re: DJ your thoughts on Mojave vs. Se Gemini [message #58786 is a reply to message #58782] |
Wed, 05 October 2005 18:35   |
![Deej [1] is currently offline](/theme/PARIS_Forum_Template/images/offline.png "Deej [1] is currently offline")
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
>like a quality piece. I can't really speak for the new Mojave's that are
>also being manufactured in China, but if they are anything like my hand
made
>mics, they are wonderful.
>
> It's really hard to believe that mics this good can be had for $1000.00.
>
>Deej
>
>
>
>
>"Tyrone Corbett" <tyronecorbett@comcast.net> wrote in message
>news:4344265d$1@linux...
>>
>> Hey Deej, I was speaking with Morgan about mic's and he mentioned that
you
>> have both the Mojave and Se Gemini. What are your impressions?
>>
>> Thanks!
>>
>> Tyrone
>
>
>I have an old one too, It does have that foam which I never noltice before.
DIes that protect it from high SPL say infront of a kick?
"David Leonard" <david@writeside.biz> wrote:
>I just looked at mine. It was one of the first made. I don't see any foam.
> Is that something they added to later versions of the mic?
>
>David
>
>On 4-Oct-2005, "Neil" <OIUOIU@OIU.com> wrote:
>
>> IMO, the best mod for a 4033 is to rip the foam out of the
>> birdcage.You guys should head down to the corner of 2nd ave and 6th street for some
Indian.
Try the extra hot vindaloo....Yumm! Cheap, there is a place on 2nd that has
all kinds of Christmas lights out front..they have a courtyard in the back
that is very nice.
Also a good one down stairs on 6th
The manger of my band lives almost across the street so we go there fairly
often.
I still hope to go to NYC.
"jason Miles" <Jmiles45@aol.com> wrote:
>
>"Thought of a place for The Paris Diner-Greys Papaya 72 and Amsterdam-$1.00
>hot dogs-Pina Coladda drinks-
>JMI'm building a computer for a friend to run cubase on. Got everything going
fine, EXCEPT the mobile rack tray (IDE) for the system drive.
Here's the history. I bought 2 of these on line (he wanted black, so I had
to go with a different brand than I normally use) neither one of them worked
I got "ERROR in READING DRIVE)
on boot (this is the system drive). It is on ide bus 1 by itself and is set
properly with the jumper for single master.
I already tried different ide cables...no worky, BUT, when I switched to
a mobile rack that I use, it worked fine. So I figured it was just crappy
racks. (mines beige and this guy wants black).
I went to comp usa and bought one of their "brand" black mobile drives on
a recomendation from a friend and get the same dang error again. Now, it
could be that this drive from CRAP USA is also bad, but I'm starting to wonder
if something else is going on that I'm missing. I'll do some more troubleshooting
as I get the time, but I would welcome any suggestions as to what may be
another reason fkor the problem.
I have a hard time believing that this mobo just doesn't like "black" rack
drives.
RodAre these rated for 133?? I had a similar problem with 66 trays in XP.
David.
Rod Lincoln wrote:
> I'm building a computer for a friend to run cubase on. Got everything going
> fine, EXCEPT the mobile rack tray (IDE) for the system drive.
> Here's the history. I bought 2 of these on line (he wanted black, so I had
> to go with a different brand than I normally use) neither one of them worked
> I got "ERROR in READING DRIVE)
> on boot (this is the system drive). It is on ide bus 1 by itself and is set
> properly with the jumper for single master.
> I already tried different ide cables...no worky, BUT, when I switched to
> a mobile rack that I use, it worked fine. So I figured it was just
|
|
|
|
| Re: DJ your thoughts on Mojave vs. Se Gemini [message #58792 is a reply to message #58786] |
Thu, 06 October 2005 06:20 |
Cujjo
Messages: 325
Registered: June 2007
|
Senior Member |
|
|
bass cab/upright which were the only things I
have
> >ever used it on.
> >
> >About 4 years ago, Mike Claytor read the TapeOp article by David Royer
and
> >put one of these mics together. I ended up with it on a loan and used it
> on
> >a female vocalist in a demo session. On her voice, it had that same rich
> >velvety vibe that I remembered about the U47. I have used it on male
> >vocalists as well. I liked it so much that I bought another one that Mike
> >made. These mics are point-to-point wired through perfboard with Peluso
> >capsules so this may set them apart from the Mojave mics which are most
> >likely designed around prefab PCB's like the later Royer kits. I also
don't
> >know anything about the capsules that Mojave is using. I will say that
the
> >original Marshallcapsules that were used in my mics sounded excellent.
The
> >Peluso capsules have a bit more detail to my ears. This is slight, but
> >audible in the *car key* test. The Mojave has very good mid and HF
handling
> >characteristics and is very flattering to the human voice with a very
warm
> >bottom which is, inthe case of my mics, probably due to the Jensen
> >transformers.
> >
> >The SE Gemini sounds similar in some ways. The bottom sounds different
from
> >the Mojave, probably due to the fact that there is a tube at the output
> >stage rather than a transformer. I haven't played around with this as
much
> >as I intend to, but I can envision a bit of variety by switching tubes.
> The
> >Gemini has a bit more output gain than my Mojaves, but the self noise is
> >just a low (both are very well behaved for tube mics). The Gemini has
*lots*
> >of low level detail. If expression is what you're looking for, you're
going
> >to get it in spades with the Gemini.
> >
> >I heard an interview with Allison Krause's engineer once describing the
> way
> >he used a Sony C800G on her voice and how this picked up every nuance.
The
> >Gemini has this kind of low level detail. The C800G is a $5k microphone.
> At
> >first I was a bit put off by the Gemini because it's so heavy. You need
> a
> >moose of a mic stand to support it. I use a big Atlas boom. If you decide
> on
> >one of these make sure you've got the infrasturcture to use it.
> >
> >I love them both. They have both done justice to vocals and instruments
> (the
> >Gemini can be an awesome guitar mic when placed about 2' from the guitar
> due
> >to it's high output and detail-the Mojave usually gets the nod on upright
> >bass) If I want to get the *breathy thing* going with a femme vocalist,
> I
> >reach for the Gemini. Since the Gemini covers about 95% of what the
Movaje
> >does tonally, it might be a more versatile piece, especially since the
tubes
> >can be swapped out to taste.
> >
> >Both of these smoke my Stephen Paul U87 for vocal tracking. It's hard to
> >admit it, but I just keep the Stephen Paul mic around here these days to
> >impress people. It's a beautiful and very *true* sounding mic and it
still
> >gets used a lot on instrumental dubs but it seldom gets the nod on a
vocal
> >session after a singer has heard their voice on the Gemini or Mojave.
> >
> >Also, I'd say that though the Gemini is manufactured in Shanghai, don't
> let
> >that worry you at all. This thing is beyond the Studio Projects
offerings.
> >SE doesn't appear to be trying to make *cheap mics* It looks and sounds
> >like a quality piece. I can't really speak for the new Mojave's that are
> >also being manufactured in China, but if they are anything like my hand
> made
> >mics, they are wonderful.
> >
> > It's really hard to believe that mics this good can be had for $1000.00.
> >
> >Deej
> >
> >
> >
> >
> >"Tyrone Corbett" <tyronecorbett@comcast.net> wrote in message
> >news:4344265d$1@linux...
> >>
> >> Hey Deej, I was speaking with Morgan about mic's and he mentioned that
> you
> >> have both the Mojave and Se Gemini. What are your impressions?
> >>
> >> Thanks!
> >>
> >> Tyrone
> >
>
|
|
|
|
| Re: DJ your thoughts on Mojave vs. Se Gemini [message #58797 is a reply to message #58792] |
Thu, 06 October 2005 09:08 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
;as I get the time, but I would welcome any suggestions as to what may
>
> be
>
>>>another reason fkor the problem.
>>>I have a hard time believing that this mobo just doesn't like "black"
>
> rack
>
>>>drives.
>>>Rod
>
>Yeah, I'm using a short rounder cable, I've tried several, all with the same
results. I've tried CS. The results are still the same. The guy is REALLY
stuck on wanting the WHOLE computer black, or, I would just use the beige
drive that works.
I may just put the sys drive in an internal bracket and slap the cover over
the hole and call it good, but this kind of bugs me, and I'd like to figure
it out. I appreciate the suggestions. Keep those cards and letters coming.
Rod
EK Sound <spamnot.info@eksoundNO.com> wrote:
>Are you using a nice "short" high density IDE cable? Try CS mode on
>the drive to see if this helps also.
>
>David.
>
>Rod Lincoln wrote:
>
>> they say 66/100/133
>> Rod
>> EK Sound <spamnot.info@eksoundNO.com> wrote:
>>
>>>Are these rated for 133?? I had a similar problem with 66 trays in XP.
>>>
>>>David.
>>>
>>>Rod Lincoln wrote:
>>>
>>>>I'm building a computer for a friend to run cubase on. Got everything
>>
>> going
>>
>>>>fine, EXCEPT the mobile rack tray (IDE) for the system drive.
>>>>Here's the history. I bought 2 of these on line (he wanted black, so
I
>>
>> had
>>
>>>>to go with a different brand than I normally use) neither one of them
>>
>> worked
>>
>>>>I got "ERROR in READING DRIVE)
>>>>on boot (this is the system drive). It is on ide bus 1 by itself and
is
>>
>> set
>>
>>>>properly with the jumper for single master.
>>>>I already tried different ide cables...no worky, BUT, when I switched
>>
>> to
>>
>>>>a mobile rack that I use, it worked fine. So I figured it was just crappy
>>>>racks. (mines beige and this guy wants black).
>>>>I went to comp usa and bought one of their "brand" black mobile drives
>>
>> on
>>
>>>>a recomendation from a friend and get the same dang error again. Now,
>>
>> it
>>
>>>>could be that this drive from CRAP USA is also bad, but I'm starting
to
>>
>> wonder
>>
>>>>if something else is going on that I'm missing. I'll do some more troubleshooting
>>>>as I get the time, but I would welcome any suggestions as to what may
>>
>> be
>>
>>>>another reason fkor the problem.
>>>>I have a hard time believing that this mobo just doesn't like "black"
>>
>> rack
>>
>>>>drives.
>>>>Rod
>>
>>if all else fails spray paint the beige on black
"Rod Lincoln" <rlincoln@kc.rr.com> wrote in message news:43454d37$1@linux...
>
> OK, I tried a DIFFERENT rack (Kingwin) that I've had for a while, better
> made,
> and worked....IT DOESN"T WORK, but I put in the cheapo beige drive that I
> use (I have several of these laying around) and is works fine. Something
> is up, because I know the Kingwin rack is good.
>
> RodHA, I actually thought of that. Wonder if the paint would hold?
Rod
"Don Nafe" <dnafe@magma.ca> wrote:
>if all else fails spray paint the beige on black
>
>
>"Rod Lincoln" <rlincoln@kc.rr.com> wrote in message news:43454d37$1@linux...
>>
>> OK, I tried a DIFFERENT rack (Kingwin) that I've had for a while, better
>> made,
>> and worked....IT DOESN"T WORK, but I put in the cheapo beige drive that
I
>> use (I have several of these laying around) and is works fine. Something
>> is up, because I know the Kingwin rack is good.
>>
>> Rod
>
>This is a multi-part message in MIME format.
------=_NextPart_000_0123_01C5CA85.036F8AF0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Rod,
I did that for a friend. Spray it flat black.
He doesn't use it much so I'm not sure it
will stand the test of time but it's a fix.
Tom
"Rod Lincoln" <rlincoln@kc.rr.com> wrote in message =
news:43456d74$1@linux...
HA, I actually thought of that. Wonder if the paint would hold?
Rod
"Don Nafe" <dnafe@magma.ca> wrote:
>if all else fails spray paint the beige on black
>
>
>"Rod Lincoln" <rlincoln@
|
|
|
|
|
|
|
|
| Re: DJ your thoughts on Mojave vs. Se Gemini [message #58821 is a reply to message #58797] |
Fri, 07 October 2005 02:05 |
rick
Messages: 1976
Registered: February 2006
|
Senior Member |
|
|
gt;as I get the time, but I would welcome any suggestions as to what may
>>>
>>> be
>>>
>>>>>another reason fkor the problem.
>>>>>I have a hard time believing that this mobo just doesn't like "black"
>>>
>>> rack
>>>
>>>>>drives.
>>>>>Rod
>>>
>>>not really, i just see nothing special about macs...several years ago
maybe but certainly not now.
On 7 Oct 2005 17:47:18 +1000, "Ab" <ab.vangoor@wanadoo.fr> wrote:
>
>But, Rick is a die-hard PC guy, and Macs do notice when you try to handle
>them
>in a PC-sh way;-?
>
>
>"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>>
>> To recap my PC was just giving me lights and fans so I
>>stripped it down,replaced the power supply,no go.
>>
>> Took it to the local PC shop who said I had a bad processor.
>>He said he put in a new processor and it fired back up.
>>
>> So I've waited about 2 weeks or so to get a new processor;got
>>it today,installed it and......drum roll-lights and fans;no
>>change!DAMN!!!DOUBLE DAMN!!!!
>>
>> Needless to say I will be visiting the local PC shop tommorrow
>>to "discuss"this matter with them.
>>
>> Let me go on record saying Morgan at Eastcoast has been nothing
>>but helpful with this,staying in constant contact and updating
>>me.Thanks Morgan.
>>
>> I just have to say for the Mac bashers I never has any problems
>>like this before I got my PC.Got an old 9600 thats still kicking
>>it after all these years.Sorry had to rant a little;I know these
>>probs can happen to anyone on any machine at anytime.
>> Was it Rick who had the looong Apple saga?
>>
>>Tune in tommorrow......
>>
>>Peteyup.
On 7 Oct 2005 12:10:55 +1000, "Pete Ruthenburg"
<ruthenburg@sbcglobal.net> wrote:
>
> To recap my PC was just giving me lights and fans so I
>stripped it down,replaced the power supply,no go.
>
> Took it to the local PC shop who said I had a bad processor.
>He said he put in a new processor and it fired back up.
>
> So I've waited about 2 weeks or so to get a new processor;got
>it today,installed it and......drum roll-lights and fans;no
>change!DAMN!!!DOUBLE DAMN!!!!
>
> Needless to say I will be visiting the local PC shop tommorrow
>to "discuss"this matter with them.
>
> Let me go on record saying Morgan at Eastcoast has been nothing
>but helpful with this,staying in constant contact and updating
>me.Thanks Morgan.
>
> I just have to say for the Mac bashers I never has any problems
>like this before I got my PC.Got an old 9600 thats still kicking
>it after all these years.Sorry had to rant a little;I know these
>probs can happen to anyone on any machine at anytime.
> Was it Rick who had the looong Apple saga?
>
>Tune in tommorrow......
>
>PeteNyuk.....nyuk........
;o)
"rick" <parnell68@hotmail.com> wrote in message
news:3ieck1dd95evvikjpculr4tc2t1m1cnltk@4ax.com...
> golly beave...
>
> On Thu, 6 Oct 2005 10:08:41 -0600, "DJ"
> <animix_spam-this-ahole_@animas.net> wrote:
>
> >I'm sure that Mike will do this for you if you pay me $1000.000.
> >
> >;O) arf arf!!!.....kiddin'!!!!.......just kiddin.
> >
> >Last I heard, Mike had retired from modding other mikes because he said
he
> >needs more time to work on himself.
> >
> >(damn......am I Mr. Clever today or what?)
> >
> >;o)
> >
> >"cuio" <chris@applemanstudio.com> wrote in message
news:43452495$1@linux...
> >>
> >>
> >>
> >> DJ, do you know if Mike C will do these mods for anyone else?
> >> I'd like to mod a PPA 2ube for a lower noise floor and slightly
smoother
> >> presence.
> >>
> >>
> >> "DJ" <animix_spam-this-ahole_@animas.net> wrote:
> >> >Well......hmmmmm. I don't own and have little experience with the U47.
> >I've
> >> >used one a couple of times. I though it was very flattering to to
> >> >male,/female vocals and bass cab/upright which were the only things I
> >have
> >> >ever used it on.
> >> >
> >> >About 4 years ago, Mike Claytor read the TapeOp article by David Royer
> >and
> >> >put one of these mics together. I ended up with it on a loan and used
it
> >> on
> >> >a female vocalist in a demo session. On her voice, it had that same
rich
> >> >velvety vibe that I remembered about the U47. I have used it on male
> >> >vocalists as well. I liked it so much that I bought another one that
Mike
> >> >made. These mics are point-to-point wired through perfboard with
Peluso
> >> >capsules so this may set them apart from the Mojave mics which are
most
> >> >likely designed around prefab PCB's like the later Royer kits. I also
> >don't
> >> >know anything about the capsules that Mojave is using. I will say that
> >the
> >> >original Marshallcapsules that were used in my mics sounded excellent.
> >The
> >> >Peluso capsules have a bit more detail to my ears. This is sligh
|
|
|
|
| Re: DJ your thoughts on Mojave vs. Se Gemini [message #58825 is a reply to message #58821] |
Fri, 07 October 2005 05:36 |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
ad to rant a little;I know these
>>>probs can happen to anyone on any machine at anytime.
>>> Was it Rick who had the looong Apple saga?
>>>
>>>Tune in tommorrow......
>>>
>>>Pete
>I don't know if anyone has come up to this but the free FFX4 DX chainer or
the commercial buy of FFX16 can load the UAD plugins with VU indications and
Preset handling.
The latency is 4096 for a normal UAD plugin instance.
Regards,
DimitriosD..where's the 4 slot free version? I can't find it.
Rod
"Dimitrios" <musurgio@otenet.gr> wrote:
>I don't know if anyone has come up to this but the free FFX4 DX chainer
or
>the commercial buy of FFX16 can load the UAD plugins with VU indications
and
>Preset handling.
>The latency is 4096 for a normal UAD plugin instance.
>Regards,
>Dimitrios
>
>Spray Paint and be done with it :)
El Miguel
"Rod Lincoln" <rlincoln@kc.rr.com> wrote in message news:43455e37$1@linux...
>
> Yeah, I'm using a short rounder cable, I've tried several, all with the
same
> results. I've tried CS. The results are still the same. The guy is REALLY
> stuck on wanting the WHOLE computer black, or, I would just use the beige
> drive that works.
> I may just put the sys drive in an internal bracket and slap the cover
over
> the hole and call it good, but this kind of bugs me, and I'd like to
figure
> it out. I appreciate the suggestions. Keep those cards and letters coming.
>
> Rod
>
> EK Sound <spamnot.info@eksoundNO.com> wrote:
> >Are you using a nice "short" high density IDE cable? Try CS mode on
> >the drive to see if this helps also.
> >
> >David.
> >
> >Rod Lincoln wrote:
> >
> >> they say 66/100/133
> >> Rod
> >> EK Sound <spamnot.info@eksoundNO.com> wrote:
> >>
> >>>Are these rated for 133?? I had a similar problem with 66 trays in XP.
> >>>
> >>>David.
> >>>
> >>>Rod Lincoln wrote:
> >>>
> >>>>I'm building a computer for a friend to run cubase on. Got everything
> >>
> >> going
> >>
> >>>>fine, EXCEPT the mobile rack tray (IDE) for the system drive.
> >>>>Here's the history. I bought 2 of these on line (he wanted black, so
> I
> >>
> >> had
> >>
> >>>>to go with a different brand than I normally use) neither one of them
> >>
> >> worked
> >>
> >>>>I got "ERROR in READING DRIVE)
> >>>>on boot (this is the system drive). It is on ide bus 1 by itself and
> is
> >>
> >> set
> >>
> >>>>properly with the jumper for single master.
> >>>>I already tried different ide cables...no worky, BUT, when I switched
> >>
> >> to
> >>
> >>>>a mobile rack that I use, it worked fine. So I figured it was just
crappy
> >>>>racks. (mines beige and this guy wants black).
> >>>>I went to comp usa and bought one of their "brand" black mobile drives
> >>
> >> on
> >>
> >>>>a recomendation from a friend and get the same dang error again. Now,
> >>
> >> it
> >>
> >>>>could be that this drive from CRAP USA is also bad, but I'm starting
> to
> >>
> >> wonder
> >>
> >>>>if something else is going on that I'm missing. I'll do some more
troubleshooting
> >>>>as I get the time, but I would welcome any suggestions as to what may
> >>
> >> be
> >>
> >>>>another reason fkor the problem.
> >>>>I have a hard time believing that this mobo just doesn't like "black"
> >>
> >> rack
> >>
> >>>>drives.
> >>>>Rod
> >>
> >>
>USB 2.0 External drive bay could be your answer.... they're cheap too now.
AA
"Rod Lincoln" <rlincoln@kc.rr.com> wrote in message news:43455e37$1@linux...
>
> Yeah, I'm using a short rounder cable, I've tried several, all with the
> same
> results. I've tried CS. The results are still the same. The guy is REALLY
> stuck on wanting the WHOLE computer black, or, I would just use the beige
> drive that works.
> I may just put the sys drive in an internal bracket and slap the cover
> over
> the hole and call it good, but this kind of bugs me, and I'd like to
> figure
> it out. I appreciate the suggestions. Keep those cards and letters coming.
>
> Rod
>
> EK Sound <spamnot.info@eksoundNO.com> wrote:
>>Are you using a nice "short" high density IDE cable? Try CS mode on
>>the drive to see if this helps also.
>>
>>David.
>>
>>Rod Lincoln wrote:
>>
>>> they say 66/100/133
>>> Rod
>>> EK Sound <spamnot.info@eksoundNO.com> wrote:
>>>
>>>>Are these rated for 133?? I had a similar problem with 66 trays in XP.
>>>>
>>>>David.
>>>>
>>>>Rod Lincoln wrote:
>>>>
>>>>>I'm building a computer for a friend to run cubase on. Got everything
>>>
>>> going
>>>
>>>>>fine, EXCEPT the mobile rack tray (IDE) for the system drive.
>>>>>Here's the history. I bought 2 of these on line (he wanted black, so
> I
>>>
>>> had
>>>
>>>>>to go with a different brand than I normally use) neither one of them
>>>
>>> worked
>>>
>>>>>I got "ERROR in READING DRIVE)
>>>>>on boot (this is the system drive). It is on ide bus 1 by itself and
> is
>>>
>>> set
>>>
>>>>>properly with the jumper for single master.
>>>>>I already tried different ide cables...no worky, BUT, when I switched
>>>
>>> to
>>>
>>>>>a mobile rack that I use, it worked fine. So I figured it was just
>>>>>crappy
>>>>>racks. (mines beige and this guy wants black).
>>>>>I went to comp usa and bought one of their "
|
|
|
|
| Re: DJ your thoughts on Mojave vs. Se Gemini [message #58837 is a reply to message #58825] |
Fri, 07 October 2005 10:02 |
rick
Messages: 1976
Registered: February 2006
|
Senior Member |
|
|
l, all with
=
>the=20
> > same
> > results. I've tried CS. The results are still the same. The guy is =
>REALLY
> > stuck on wanting the WHOLE computer black, or, I would just use the
=
>beige
> > drive that works.
> > I may just put the sys drive in an internal bracket and slap the =
>cover=20
> > over
> > the hole and call it good, but this kind of bugs me, and I'd like to
=
>
> > figure
> > it out. I appreciate the suggestions. Keep those cards and letters =
>coming.
> >
> > Rod
> >
> > EK Sound <spamnot.info@eksoundNO.com> wrote:
> >>Are you using a nice "short" high density IDE cable? Try CS mode on
> >>the drive to see if this helps also.
> >>
> >>David.
> >>
> >>Rod Lincoln wrote:
> >>
> >>> they say 66/100/133
> >>> Rod
> >>> EK Sound <spamnot.info@eksoundNO.com> wrote:
> >>>
> >>>>Are these rated for 133?? I had a similar problem with 66 trays in
=
>XP.
> >>>>
> >>>>David.
> >>>>
> >>>>Rod Lincoln wrote:
> >>>>
> >>>>>I'm building a computer for a friend to run cubase on. Got =
>everything
> >>>
> >>> going
> >>>
> >>>>>fine, EXCEPT the mobile rack tray (IDE) for the system drive.
> >>>>>Here's the history. I bought 2 of these on line (he wanted black,
=
>so
> > I
> >>>
> >>> had
> >>>
> >>>>>to go with a different brand than I normally use) neither one of
=
>them
> >>>
> >>> worked
> >>>
> >>>>>I got "ERROR in READING DRIVE)
> >>>>>on boot (this is the system drive). It is on ide bus 1 by itself
=
>and
> > is
> >>>
> >>> set
> >>>
> >>>>>properly with the jumper for single master.
> >>>>>I already tried different ide cables...no worky, BUT, when I =
>switched
> >>>
> >>> to
> >>>
> >>>>>a mobile rack that I use, it worked fine. So I figured it was =
>just=20
> >>>>>crappy
> >>>>>racks. (mines beige and this guy wants black).
> >>>>>I went to comp usa and bought one of their "brand" black mobile =
>drives
> >>>
> >>> on
> >>>
> >>>>>a recomendation from a friend and get the same dang error again.
=
>Now,
> >>>
> >>> it
> >>>
> >>>>>could be that this drive from CRAP USA is also bad, but I'm =
>starting
> > to
> >>>
> >>> wonder
> >>>
> >>>>>if something else is going on that I'm missing. I'll do some more
=
>
> >>>>>troubleshooting
> >>>>>as I get the time, but I would welcome any suggestions as to what
=
>may
> >>>
> >>> be
> >>>
> >>>>>another reason fkor the problem.
> >>>>>I have a hard time believing that this mobo just doesn't like =
>"black"
> >>>
> >>> rack
> >>>
> >>>>>drives.
> >>>>>Rod
> >>>
> >>>
> >=20
>
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DArial size=3D2>Yes but it STILL has to be =
>black...</FONT></DIV>
><DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Aaron Allen" <<A=20
> href=3D"mailto:nospam@not_here.dude">nospam@not_here.dude</A>> =
>wrote in=20
> message <A =
>href=3D"news:4346957e@linux">news:4346957e@linux</A>...</DIV>USB 2.0=20
> External drive bay could be your answer.... they're cheap too=20
> now.<BR>AA<BR><BR><BR>"Rod Lincoln" <<A=20
> href=3D"mailto:rlincoln@kc.rr.com">rlincoln@kc.rr.com</A>> wrote in =
>message=20
> <A =
>href=3D"news:43455e37$1@linux">news:43455e37$1@linux</A>...<BR>><BR>&g=
>t;=20
> Yeah, I'm using a short rounder cable, I've tried several, all with =
>the=20
> <BR>> same<BR>> results. I've tried CS. The results are still =
>the same.=20
> The guy is REALLY<BR>> stuck on wanting the WHOLE computer black, =
>or, I=20
> would just use the beige<BR>> drive that works.<BR>> I may just =
>put the=20
> sys drive in an internal bracket and slap the cover <BR>> =
>over<BR>> the=20
> hole and call it good, but this kind of bugs me, and I'd like to =
><BR>>=20
> figure<BR>> it out. I appreciate the suggestions. Keep those cards =
>and=20
> letters coming.<BR>><BR>> Rod<BR>><BR>> EK Sound <<A=20
> =
>href=3D"mailto:spamnot.info@eksoundNO.com">spamnot.info@eksoundNO.com</A>=
>>=20
> wrote:<BR>>>Are you using a nice "short" high density IDE =
>cable? =20
> Try CS mode on<BR>>>the drive to see if this helps=20
> also.<BR>>><BR>>>David.<BR>>><BR>>>Rod Lincoln =
>
> wrote:<BR>>><BR>>>> they say 66/100/133<BR>>>> =
>
> Rod<BR>>>> EK Sound <<A=20
> =
>href=3D"mailto:spamnot.info@eksoundNO.com">spamnot.info@eksoundNO.com</A>=
>>=20
> wrote:<BR>>>><BR>>>>>Are these rated for 133?? I =
>had a=20
> similar problem with 66 trays in=20
> =
>XP.<BR>>>>><BR>>>>>David.<BR>>>>><BR>=
>>>>>Rod=20
> Lincoln wrote:<BR>>>>><BR>>>>>>I'm building =
>a=20
> computer for a friend to run cubase on. Got=20
> everything<BR>>>><BR>>>>=20
> going<BR>>>><BR>>>>>>fine, EXCEPT the mobile =
>rack tray=20
> (IDE) for
|
|
|
|
Goto Forum:
Current Time: Sat Dec 14 14:00:00 PST 2024
Total time taken to generate the page: 0.01530 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
