The PARIS Forums: PARIS: Main » What am I doing wrong Digital SPDIF

Home » The PARIS Forums » PARIS: Main » What am I doing wrong Digital SPDIF

Show: Today's Messages :: Polls :: Message Navigator

What am I doing wrong Digital SPDIF [message #69857]

Sat, 01 July 2006 10:08

brandon[2]
Messages: 380
Registered: June 2006

Senior Member

I just can't seem to get the SPDIF interface to work.
I am trying to send digital RCA SPDIF OUT from an EMU 0404 to the RCA SPDIF
IN on the MEC. I have tried every configuration...:
1. 0404 - External (I/O coaxial - spdif)& PARIS - Internal
2. 0404 - External (I/O coaxial - spdif)& PARIS - Digital
3. 0404 - Internal (I/O coaxial - spdif)& PARIS - Digital
4. 0404 - Internal (I/O coaxial - spdif)& PARIS - Internal

I have the MON select box checked for the PCI SPDIF card in PatchMix software
for the 0404.

I have a new Monster Cable RCA SPDIF cable running from the
0404 OUT to the MEC SPDIF IN.

Now if I am wanting to use PARIS as the master do I have to have two SPDIF
cables running?

But shouldn't I be able to get a LOCK using the 0404 as the master with one
SPDIF cable?

NOTE: I just want to use PARIS to monitor thru in this setup.
BOTH Cubase and PARIS are on the same computer.

ANY help would be appreciated.

THANKS!!

b

Report message to a moderator

Re: What am I doing wrong Digital SPDIF [message #69860 is a reply to message #69857]

Sat, 01 July 2006 10:18

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

I would create a Paris project, route the Paris spdif I/O to a pair of Paris
channel inserts in the Paris virtual patchbay and hook up the EMU spdif
input and output to the Paris spdif input and output. Then go to the inserts
on the Paris channels and set them to externsl. You should now be able to
hear whatever is playing through the EMU interface. on the pair of Paris
channles.

"Brandon" <a@a.com> wrote in message news:44a6ac29$1@linux...
>
> I just can't seem to get the SPDIF interface to work.
> I am trying to send digital RCA SPDIF OUT from an EMU 0404 to the RCA
SPDIF
> IN on the MEC. I have tried every configuration...:
> 1. 0404 - External (I/O coaxial - spdif)& PARIS - Internal
> 2. 0404 - External (I/O coaxial - spdif)& PARIS - Digital
> 3. 0404 - Internal (I/O coaxial - spdif)& PARIS - Digital
> 4. 0404 - Internal (I/O coaxial - spdif)& PARIS - Internal
>
>
> I have the MON select box checked for the PCI SPDIF card in PatchMix
software
> for the 0404.
>
> I have a new Monster Cable RCA SPDIF cable running from the
> 0404 OUT to the MEC SPDIF IN.
>
> Now if I am wanting to use PARIS as the master do I have to have two SPDIF
> cables running?
>
> But shouldn't I be able to get a LOCK using the 0404 as the master with
one
> SPDIF cable?
>
> NOTE: I just want to use PARIS to monitor thru in this setup.
> BOTH Cubase and PARIS are on the same computer.
>
> ANY help would be appreciated.
>
> THANKS!!
>
> b
>
>
>

Report message to a moderator

Re: What am I doing wrong Digital SPDIF [message #69863 is a reply to message #69860]

Sat, 01 July 2006 10:32

brandon[2]
Messages: 380
Registered: June 2006

Senior Member

Ah so you have to have the EDS FX set to EXTERNAL on the two channels you
route to in the patch bay???
I was not doing this.
Does this have to do with all digital signals (optical and coaxial?

Thanks

"DJ" <animix_spam-this-ahole_@animas.net> wrote:
>I would create a Paris project, route the Paris spdif I/O to a pair of Paris
>channel inserts in the Paris virtual patchbay and hook up the EMU spdif
>input and output to the Paris spdif input and output. Then go to the inserts
>on the Paris channels and set them to externsl. You should now be able to
>hear whatever is playing through the EMU interface. on the pair of Paris
>channles.
>
>"Brandon" <a@a.com> wrote in message news:44a6ac29$1@linux...
>>
>> I just can't seem to get the SPDIF interface to work.
>> I am trying to send digital RCA SPDIF OUT from an EMU 0404 to the RCA
>SPDIF
>> IN on the MEC. I have tried every configuration...:
>> 1. 0404 - External (I/O coaxial - spdif)& PARIS - Internal
>> 2. 0404 - External (I/O coaxial - spdif)& PARIS - Digital
>> 3. 0404 - Internal (I/O coaxial - spdif)& PARIS - Digital
>> 4. 0404 - Internal (I/O coaxial - spdif)& PARIS - Internal
>>
>>
>> I have the MON select box checked for the PCI SPDIF card in PatchMix
>software
>> for the 0404.
>>
>> I have a new Monster Cable RCA SPDIF cable running from the
>> 0404 OUT to the MEC SPDIF IN.
>>
>> Now if I am wanting to use PARIS as the master do I have to have two SPDIF
>> cables running?
>>
>> But shouldn't I be able to get a LOCK using the 0404 as the master with
>one
>> SPDIF cable?
>>
>> NOTE: I just want to use PARIS to monitor thru in this setup.
>> BOTH Cubase and PARIS are on the same computer.
>>
>> ANY help would be appreciated.
>>
>> THANKS!!
>>
>> b
>>
>>
>>
>
>

Report message to a moderator

Re: What am I doing wrong Digital SPDIF [message #69864 is a reply to message #69857]

Sat, 01 July 2006 10:37

EK Sound

Messages: 939
Registered: June 2005

Senior Member

Some answers below...

Brandon wrote:

> I just can't seem to get the SPDIF interface to work.
> I am trying to send digital RCA SPDIF OUT from an EMU 0404 to the RCA SPDIF
> IN on the MEC. I have tried every configuration...:
> 1. 0404 - External (I/O coaxial - spdif)& PARIS - Internal
> 2. 0404 - External (I/O coaxial - spdif)& PARIS - Digital
> 3. 0404 - Internal (I/O coaxial - spdif)& PARIS - Digital
> 4. 0404 - Internal (I/O coaxial - spdif)& PARIS - Internal
>
>
> I have the MON select box checked for the PCI SPDIF card in PatchMix software
> for the 0404.
>
> I have a new Monster Cable RCA SPDIF cable running from the
> 0404 OUT to the MEC SPDIF IN.
In this config, the 0404 would be clock master and Paris would be
clock slave.

>
> Now if I am wanting to use PARIS as the master do I have to have two SPDIF
> cables running?

Yes, you would have to have a SPDIF line from Paris to the 0404 and
set the 0404 to clock to SPDIF
>
> But shouldn't I be able to get a LOCK using the 0404 as the master with one
> SPDIF cable?
Lock? There is no sync capability with SPDIF.

>
> NOTE: I just want to use PARIS to monitor thru in this setup.
> BOTH Cubase and PARIS are on the same computer.

This will work... I tried mixing directly into WaveLab on the Paris
computer through another card just to see if it would work and it did.
You will have to use two cables and set Paris as master, and the 0404
as a SPDIF slave device. Generally, the monitoring end wants to be a
slave, so you will have to be carefull to avoid the "dog chasing its
tail" problem.
>
> ANY help would be appreciated.
>
> THANKS!!
>
> b
>
>
>
David.

Report message to a moderator

Re: What am I doing wrong Digital SPDIF [message #69907 is a reply to message #69864]

Sun, 02 July 2006 20:48

brandon[2]
Messages: 380
Registered: June 2006

Senior Member

Guys,
I just can't get it.
I went and bought a second SPDIF cable today and tried everyconfig I could
think of.
I tried setting up sends in the Patchmix software and everything.
I don't think it should be this difficult to get a digial signal to work.
Something must be wrong here.
I am going to call EMU tech support tomorrow and see if they can walk me
thru it. I really hope there is something wrong with the card cause the alternative
would mean I am not as techniacal as I thought I was....might be time for
a slice of humble pie.

B

EK Sound <askme@nospam.com> wrote:
>Some answers below...
>
>Brandon wrote:
>
>> I just can't seem to get the SPDIF interface to work.
>> I am trying to send digital RCA SPDIF OUT from an EMU 0404 to the RCA
SPDIF
>> IN on the MEC. I have tried every configuration...:
>> 1. 0404 - External (I/O coaxial - spdif)& PARIS - Internal
>> 2. 0404 - External (I/O coaxial - spdif)& PARIS - Digital
>> 3. 0404 - Internal (I/O coaxial - spdif)& PARIS - Digital
>> 4. 0404 - Internal (I/O coaxial - spdif)& PARIS - Internal
>>
>>
>> I have the MON select box checked for the PCI SPDIF card in PatchMix software
>> for the 0404.
>>
>> I have a new Monster Cable RCA SPDIF cable running from the
>> 0404 OUT to the MEC SPDIF IN.
>In this config, the 0404 would be clock master and Paris would be
>clock slave.
>
>>
>> Now if I am wanting to use PARIS as the master do I have to have two SPDIF
>> cables running?
>
>Yes, you would have to have a SPDIF line from Paris to the 0404 and
>set the 0404 to clock to SPDIF
>>
>> But shouldn't I be able to get a LOCK using the 0404 as the master with
one
>> SPDIF cable?
>Lock? There is no sync capability with SPDIF.
>
>>
>> NOTE: I just want to use PARIS to monitor thru in this setup.
>> BOTH Cubase and PARIS are on the same computer.
>
>This will work... I tried mixing directly into WaveLab on the Paris
>computer through another card just to see if it would work and it did.
>You will have to use two cables and set Paris as master, and the 0404
>as a SPDIF slave device. Generally, the monitoring end wants to be a
>slave, so you will have to be carefull to avoid the "dog chasing its
>tail" problem.
>>
>> ANY help would be appreciated.
>>
>> THANKS!!
>>
>> b
>>
>>
>>
>David.

Report message to a moderator

Previous Topic:	Clip Light Macro
Next Topic:	Another "greatest of all time" list

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 25 01:43:16 PST 2024

Total time taken to generate the page: 0.01482 seconds