The PARIS Forums: PARIS: Main » Two small comments on the signal flow chart

Home » The PARIS Forums » PARIS: Main » Two small comments on the signal flow chart

Show: Today's Messages :: Polls :: Message Navigator

Two small comments on the signal flow chart [message #68113]

Fri, 12 May 2006 11:35

chuck duffy
Messages: 453
Registered: July 2005

Senior Member

1. Dimitrios - review the diagram and you will see why it is not possible
to swap the order of native/eds plugins. Data is streamed from disk through
the native section and then passed to the EDS. Once it's on the EDS - it's
there until it goes out one of the EDS outputs, or back to disk.

2. The signal flow for auxes is technically correct, but there is one interesting
thing I noted in the internals of the paris mixer code... The aux outputs
don't flow back to the global bus individually. All 8 Aux outputs sum down
to a single stereo pair in the effects subsystem, then that sum passes on
to the globals.

Chuck

Report message to a moderator

Re: Two small comments on the signal flow chart [message #68128 is a reply to message #68113]

Fri, 12 May 2006 19:00

John [1]
Messages: 2229
Registered: September 2005

Senior Member

Nice aux info. Well, this gives us more time to do auto plugin latency compensation!
woo hoo

"chuck" <c@c.com> wrote:
>
>1. Dimitrios - review the diagram and you will see why it is not possible
>to swap the order of native/eds plugins. Data is streamed from disk through
>the native section and then passed to the EDS. Once it's on the EDS - it's
>there until it goes out one of the EDS outputs, or back to disk.
>
>2. The signal flow for auxes is technically correct, but there is one interesting
>thing I noted in the internals of the paris mixer code... The aux outputs
>don't flow back to the global bus individually. All 8 Aux outputs sum down
>to a single stereo pair in the effects subsystem, then that sum passes on
>to the globals.
>
>Chuck

Report message to a moderator

Re: Two small comments on the signal flow chart [message #68136 is a reply to message #68128]

Fri, 12 May 2006 21:09

Rob Arsenault

Messages: 152
Registered: September 2005

Senior Member

That would be so cool.....!!!

"John" <no@no.com> wrote in message news:44653da7$1@linux...
>
> Nice aux info. Well, this gives us more time to do auto plugin latency
compensation!
> woo hoo
>
>
> "chuck" <c@c.com> wrote:
> >
> >1. Dimitrios - review the diagram and you will see why it is not possible
> >to swap the order of native/eds plugins. Data is streamed from disk
through
> >the native section and then passed to the EDS. Once it's on the EDS -
it's
> >there until it goes out one of the EDS outputs, or back to disk.
> >
> >2. The signal flow for auxes is technically correct, but there is one
interesting
> >thing I noted in the internals of the paris mixer code... The aux
outputs
> >don't flow back to the global bus individually. All 8 Aux outputs sum
down
> >to a single stereo pair in the effects subsystem, then that sum passes on
> >to the globals.
> >
> >Chuck
>

Report message to a moderator

Previous Topic:	OT - Beovox S60 speakers - as monitors?
Next Topic:	Chuck Proposal To Release The Reverb Plugin !!!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 10 16:54:25 PST 2024

Total time taken to generate the page: 0.37593 seconds