Home » The PARIS Forums » PARIS: Main » Mike's Multi Processor Drivers - Confirmed working with Mac Pro,Virtuavia
|
|
| Re: Mike's Multi Processor Drivers - Confirmed working with Mac Pro, [message #101747 is a reply to message #101744] |
Mon, 22 December 2008 15:29   |
|
|
Good job guys!! I can't wait to try the drivers and get Paris up and running
in 2009..
TC <tc@spammetodeathyoubastards.org> wrote:
>Hi all,
>
>I just wanted to confirm that I've got Paris running on my Mac Pro with
>the virtuavia expansion chassis running XP. This is a 4 card/4 mec setup
>with multiple adat cards as well as analog cards in each mec.
>
>I have MTC sending and receiving to a second mac pro running PTHD with
>Pro Tools 8, (2 Lynx Auroras and 2 Digi 192 digital i/o's) with 32
>channels of adat piping from PT to Paris, then 2 channels of spdif back
>from Paris to Pro Tools for mixdown. All the mecs and digi interfaces
>are clocked from a Lucid GenX 192. Sync seems to work ok with either PT
>or Paris as master, but I have no way of testing adat sync since the PT
>interfaces don't have it.
>
>Thanks to Mike for his assistance over the weekend. The new drivers work
>great!
>
>Cheers,
>
>
>TC
|
|
|
|
|
|
|
|
| Re: Mike's Multi Processor Drivers - Confirmed working with Mac Pro, [message #102132 is a reply to message #102127] |
Thu, 15 January 2009 08:39 |
TC
Messages: 327
Registered: September 2005
|
Senior Member |
|
|
Bootcamp here, XP on it's own internal drive.
Cheers,
TC
Micha wrote:
> Great! Do you run XP with bootcamp, or do you emulate it in OS X?
>
> Micha
>
> TC <tc@spammetodeathyoubastards.org> wrote:
>> Hi all,
>>
>> I just wanted to confirm that I've got Paris running on my Mac Pro with
>
>> the virtuavia expansion chassis running XP. This is a 4 card/4 mec setup
>
>> with multiple adat cards as well as analog cards in each mec.
>>
>> I have MTC sending and receiving to a second mac pro running PTHD with
>> Pro Tools 8, (2 Lynx Auroras and 2 Digi 192 digital i/o's) with 32
>> channels of adat piping from PT to Paris, then 2 channels of spdif back
>
>>from Paris to Pro Tools for mixdown. All the mecs and digi interfaces
>> are clocked from a Lucid GenX 192. Sync seems to work ok with either PT
>
>> or Paris as master, but I have no way of testing adat sync since the PT
>
>> interfaces don't have it.
>>
>> Thanks to Mike for his assistance over the weekend. The new drivers work
>
>> great!
>>
>> Cheers,
>>
>>
>> TC
>
|
|
|
|
| Re: Mike's Multi Processor Drivers - Confirmed working with Mac Pro, [message #102133 is a reply to message #102132] |
Thu, 15 January 2009 10:38 |
Micha
Messages: 72
Registered: January 2009
|
Member |
|
|
TC,
why doesn´t it work when you plug the EDS directly on the mainboard of the
Mac?
(I heard anywhere that the EDS is PCI and the Mac supports only PCI express,
or so... is that true?)
TC <tc@spammetodeathyoubastards.org> wrote:
>Bootcamp here, XP on it's own internal drive.
>
>Cheers,
>
>TC
>
>
>Micha wrote:
>> Great! Do you run XP with bootcamp, or do you emulate it in OS X?
>>
>> Micha
>>
>> TC <tc@spammetodeathyoubastards.org> wrote:
>>> Hi all,
>>>
>>> I just wanted to confirm that I've got Paris running on my Mac Pro with
>>
>>> the virtuavia expansion chassis running XP. This is a 4 card/4 mec setup
>>
>>> with multiple adat cards as well as analog cards in each mec.
>>>
>>> I have MTC sending and receiving to a second mac pro running PTHD with
>>> Pro Tools 8, (2 Lynx Auroras and 2 Digi 192 digital i/o's) with 32
>>> channels of adat piping from PT to Paris, then 2 channels of spdif back
>>
>>>from Paris to Pro Tools for mixdown. All the mecs and digi interfaces
>>> are clocked from a Lucid GenX 192. Sync seems to work ok with either
PT
>>
>>> or Paris as master, but I have no way of testing adat sync since the
PT
>>
>>> interfaces don't have it.
>>>
>>> Thanks to Mike for his assistance over the weekend. The new drivers work
>>
>>> great!
>>>
>>> Cheers,
>>>
>>>
>>> TC
>>
|
|
|
|
| Re: Mike's Multi Processor Drivers - Confirmed working with Mac Pro, [message #102134 is a reply to message #102133] |
Thu, 15 January 2009 09:36 |
TC
Messages: 327
Registered: September 2005
|
Senior Member |
|
|
Hi Micha,
That's correct. I use a virtuavia 4 slot Pci -> Pcie expansion chassis.
Virtuavia Pcie host card in the mac pro, 4 eds cards in the chassis.
Cheers,
TC
Micha wrote:
> TC,
> why doesn´t it work when you plug the EDS directly on the mainboard of the
> Mac?
> (I heard anywhere that the EDS is PCI and the Mac supports only PCI express,
> or so... is that true?)
>
> TC <tc@spammetodeathyoubastards.org> wrote:
>> Bootcamp here, XP on it's own internal drive.
>>
>> Cheers,
>>
>> TC
>>
>>
>> Micha wrote:
>>> Great! Do you run XP with bootcamp, or do you emulate it in OS X?
>>>
>>> Micha
>>>
>>> TC <tc@spammetodeathyoubastards.org> wrote:
>>>> Hi all,
>>>>
>>>> I just wanted to confirm that I've got Paris running on my Mac Pro with
>>>> the virtuavia expansion chassis running XP. This is a 4 card/4 mec setup
>>>> with multiple adat cards as well as analog cards in each mec.
>>>>
>>>> I have MTC sending and receiving to a second mac pro running PTHD with
>
>>>> Pro Tools 8, (2 Lynx Auroras and 2 Digi 192 digital i/o's) with 32
>>>> channels of adat piping from PT to Paris, then 2 channels of spdif back
>>> >from Paris to Pro Tools for mixdown. All the mecs and digi interfaces
>
>>>> are clocked from a Lucid GenX 192. Sync seems to work ok with either
> PT
>>>> or Paris as master, but I have no way of testing adat sync since the
> PT
>>>> interfaces don't have it.
>>>>
>>>> Thanks to Mike for his assistance over the weekend. The new drivers work
>>>> great!
>>>>
>>>> Cheers,
>>>>
>>>>
>>>> TC
>
|
|
|
|
| Re: Mike's Multi Processor Drivers - Confirmed working with Mac Pro, [message #102135 is a reply to message #102134] |
Thu, 15 January 2009 12:07 |
Micha
Messages: 72
Registered: January 2009
|
Member |
|
|
..interesting alternative to magma!
is this the model you have?
http://www.virtuavia.eu/shop/pci-e-to-pci-expansion-card-kit .html
TC <tc@spammetodeathyoubastards.org> wrote:
>Hi Micha,
>
>That's correct. I use a virtuavia 4 slot Pci -> Pcie expansion chassis.
>
>Virtuavia Pcie host card in the mac pro, 4 eds cards in the chassis.
>
>Cheers,
>
>TC
>
>
>Micha wrote:
>> TC,
>> why doesn´t it work when you plug the EDS directly on the mainboard of
the
>> Mac?
>> (I heard anywhere that the EDS is PCI and the Mac supports only PCI express,
>> or so... is that true?)
>>
>> TC <tc@spammetodeathyoubastards.org> wrote:
>>> Bootcamp here, XP on it's own internal drive.
>>>
>>> Cheers,
>>>
>>> TC
>>>
>>>
>>> Micha wrote:
>>>> Great! Do you run XP with bootcamp, or do you emulate it in OS X?
>>>>
>>>> Micha
>>>>
>>>> TC <tc@spammetodeathyoubastards.org> wrote:
>>>>> Hi all,
>>>>>
>>>>> I just wanted to confirm that I've got Paris running on my Mac Pro
with
>>>>> the virtuavia expansion chassis running XP. This is a 4 card/4 mec
setup
>>>>> with multiple adat cards as well as analog cards in each mec.
>>>>>
>>>>> I have MTC sending and receiving to a second mac pro running PTHD with
>>
>>>>> Pro Tools 8, (2 Lynx Auroras and 2 Digi 192 digital i/o's) with 32
>>>>> channels of adat piping from PT to Paris, then 2 channels of spdif
back
>>>> >from Paris to Pro Tools for mixdown. All the mecs and digi interfaces
>>
>>>>> are clocked from a Lucid GenX 192. Sync seems to work ok with either
>> PT
>>>>> or Paris as master, but I have no way of testing adat sync since the
>> PT
>>>>> interfaces don't have it.
>>>>>
>>>>> Thanks to Mike for his assistance over the weekend. The new drivers
work
>>>>> great!
>>>>>
>>>>> Cheers,
>>>>>
>>>>>
>>>>> TC
>>
|
|
|
|
| Re: Mike's Multi Processor Drivers - Confirmed working with Mac Pro, [message #102136 is a reply to message #102134] |
Thu, 15 January 2009 14:03 |
excelav
Messages: 2130
Registered: July 2005
Location: Metro Detroit
|
Senior Member |
|
|
Hey TC! Have you had any trouble with the power supply on the virtuavia?
Some people here thought the power supply was too small.
TC <tc@spammetodeathyoubastards.org> wrote:
>Hi Micha,
>
>That's correct. I use a virtuavia 4 slot Pci -> Pcie expansion chassis.
>
>Virtuavia Pcie host card in the mac pro, 4 eds cards in the chassis.
>
>Cheers,
>
>TC
>
>
>Micha wrote:
>> TC,
>> why doesn´t it work when you plug the EDS directly on the mainboard of
the
>> Mac?
>> (I heard anywhere that the EDS is PCI and the Mac supports only PCI express,
>> or so... is that true?)
>>
>> TC <tc@spammetodeathyoubastards.org> wrote:
>>> Bootcamp here, XP on it's own internal drive.
>>>
>>> Cheers,
>>>
>>> TC
>>>
>>>
>>> Micha wrote:
>>>> Great! Do you run XP with bootcamp, or do you emulate it in OS X?
>>>>
>>>> Micha
>>>>
>>>> TC <tc@spammetodeathyoubastards.org> wrote:
>>>>> Hi all,
>>>>>
>>>>> I just wanted to confirm that I've got Paris running on my Mac Pro
with
>>>>> the virtuavia expansion chassis running XP. This is a 4 card/4 mec
setup
>>>>> with multiple adat cards as well as analog cards in each mec.
>>>>>
>>>>> I have MTC sending and receiving to a second mac pro running PTHD with
>>
>>>>> Pro Tools 8, (2 Lynx Auroras and 2 Digi 192 digital i/o's) with 32
>>>>> channels of adat piping from PT to Paris, then 2 channels of spdif
back
>>>> >from Paris to Pro Tools for mixdown. All the mecs and digi interfaces
>>
>>>>> are clocked from a Lucid GenX 192. Sync seems to work ok with either
>> PT
>>>>> or Paris as master, but I have no way of testing adat sync since the
>> PT
>>>>> interfaces don't have it.
>>>>>
>>>>> Thanks to Mike for his assistance over the weekend. The new drivers
work
>>>>> great!
>>>>>
>>>>> Cheers,
>>>>>
>>>>>
>>>>> TC
>>
|
|
|
|
| Re: Mike's Multi Processor Drivers - Confirmed working with Mac Pro, [message #102138 is a reply to message #102135] |
Thu, 15 January 2009 15:42 |
TC
Messages: 327
Registered: September 2005
|
Senior Member |
|
|
That's the one.. I put it in a rackmount ATX case with a beefy power
supply and a speed switchable fan. It runs very quiet.
Cheers,
TC
Micha wrote:
> .interesting alternative to magma!
> is this the model you have?
> http://www.virtuavia.eu/shop/pci-e-to-pci-expansion-card-kit .html
>
>
> TC <tc@spammetodeathyoubastards.org> wrote:
>> Hi Micha,
>>
>> That's correct. I use a virtuavia 4 slot Pci -> Pcie expansion chassis.
>>
>> Virtuavia Pcie host card in the mac pro, 4 eds cards in the chassis.
>>
>> Cheers,
>>
>> TC
>>
>>
>> Micha wrote:
>>> TC,
>>> why doesn´t it work when you plug the EDS directly on the mainboard of
> the
>>> Mac?
>>> (I heard anywhere that the EDS is PCI and the Mac supports only PCI express,
>>> or so... is that true?)
>>>
>>> TC <tc@spammetodeathyoubastards.org> wrote:
>>>> Bootcamp here, XP on it's own internal drive.
>>>>
>>>> Cheers,
>>>>
>>>> TC
>>>>
>>>>
>>>> Micha wrote:
>>>>> Great! Do you run XP with bootcamp, or do you emulate it in OS X?
>>>>>
>>>>> Micha
>>>>>
>>>>> TC <tc@spammetodeathyoubastards.org> wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> I just wanted to confirm that I've got Paris running on my Mac Pro
> with
>>>>>> the virtuavia expansion chassis running XP. This is a 4 card/4 mec
> setup
>>>>>> with multiple adat cards as well as analog cards in each mec.
>>>>>>
>>>>>> I have MTC sending and receiving to a second mac pro running PTHD with
>>>>>> Pro Tools 8, (2 Lynx Auroras and 2 Digi 192 digital i/o's) with 32
>
>>>>>> channels of adat piping from PT to Paris, then 2 channels of spdif
> back
>>>>> >from Paris to Pro Tools for mixdown. All the mecs and digi interfaces
>>>>>> are clocked from a Lucid GenX 192. Sync seems to work ok with either
>>> PT
>>>>>> or Paris as master, but I have no way of testing adat sync since the
>>> PT
>>>>>> interfaces don't have it.
>>>>>>
>>>>>> Thanks to Mike for his assistance over the weekend. The new drivers
> work
>>>>>> great!
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>>
>>>>>> TC
>
|
|
|
|
| Re: Mike's Multi Processor Drivers - Confirmed working with Mac Pro, [message #102139 is a reply to message #102136] |
Thu, 15 January 2009 15:44 |
TC
Messages: 327
Registered: September 2005
|
Senior Member |
|
|
Hi James,
I got the version Micha referenced above and put it in an atx case with
a 500W power supply.
I wouldn't have trusted that other little box that they have. Best thing
is to just get the host card/board and use your own case/psu.
Cheers,
TC
James McCloskey wrote:
> Hey TC! Have you had any trouble with the power supply on the virtuavia?
> Some people here thought the power supply was too small.
>
> TC <tc@spammetodeathyoubastards.org> wrote:
>> Hi Micha,
>>
>> That's correct. I use a virtuavia 4 slot Pci -> Pcie expansion chassis.
>>
>> Virtuavia Pcie host card in the mac pro, 4 eds cards in the chassis.
>>
>> Cheers,
>>
>> TC
>>
>>
>> Micha wrote:
>>> TC,
>>> why doesn´t it work when you plug the EDS directly on the mainboard of
> the
>>> Mac?
>>> (I heard anywhere that the EDS is PCI and the Mac supports only PCI express,
>>> or so... is that true?)
>>>
>>> TC <tc@spammetodeathyoubastards.org> wrote:
>>>> Bootcamp here, XP on it's own internal drive.
>>>>
>>>> Cheers,
>>>>
>>>> TC
>>>>
>>>>
>>>> Micha wrote:
>>>>> Great! Do you run XP with bootcamp, or do you emulate it in OS X?
>>>>>
>>>>> Micha
>>>>>
>>>>> TC <tc@spammetodeathyoubastards.org> wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> I just wanted to confirm that I've got Paris running on my Mac Pro
> with
>>>>>> the virtuavia expansion chassis running XP. This is a 4 card/4 mec
> setup
>>>>>> with multiple adat cards as well as analog cards in each mec.
>>>>>>
>>>>>> I have MTC sending and receiving to a second mac pro running PTHD with
>>>>>> Pro Tools 8, (2 Lynx Auroras and 2 Digi 192 digital i/o's) with 32
>
>>>>>> channels of adat piping from PT to Paris, then 2 channels of spdif
> back
>>>>> >from Paris to Pro Tools for mixdown. All the mecs and digi interfaces
>>>>>> are clocked from a Lucid GenX 192. Sync seems to work ok with either
>>> PT
>>>>>> or Paris as master, but I have no way of testing adat sync since the
>>> PT
>>>>>> interfaces don't have it.
>>>>>>
>>>>>> Thanks to Mike for his assistance over the weekend. The new drivers
> work
>>>>>> great!
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>>
>>>>>> TC
>
|
|
|
|
Goto Forum:
Current Time: Sat Nov 09 12:51:32 PST 2024
Total time taken to generate the page: 0.00870 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
