The PARIS Forums: PARIS: Main » Frequency development micing

Home » The PARIS Forums » PARIS: Main » Frequency development micing

Show: Today's Messages :: Polls :: Message Navigator

Frequency development micing [message #78024]

Sun, 07 January 2007 10:28

brandon[2]
Messages: 380
Registered: June 2006

Senior Member

Ok... I have been over thinking rock n' roll lately.
What I am thinking is....
If it takes roughly 28 feet for a 40hz wave form to develop
does that mean that that is the optimal distance for micing that frequency?
I figure only about 440hz and higher develop fully within 4 feet of the kick
drum.
So if i remember correctly a 60hz frequency will go thru one cylce at approximately
20-30ms into the kick sound.
So I was wondering if shifting the lower frequencies back towards the beginning
of kick beat by approximately 20-30ms if that would give a more powerful
kick sound/tone.
Make sense?
Anyway I will be trying it.
Wonder if the same will help bass guitar or any instrument.
Perhaps I ned to just go to sleep.

B

Report message to a moderator

Re: Frequency development micing [message #78026 is a reply to message #78024]

Sun, 07 January 2007 11:15

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

Don't forget to think about proximity effect in this equation. I do
encourage you to do experiments, keep going man. What you'll learn about
your mics, instruments and rooms will stay with you long after any recording
medium. Acoustic knowledge never goes out of style.

AA

"Brandon" <a@a.com> wrote in message news:45a12dc0$1@linux...
>
> Ok... I have been over thinking rock n' roll lately.
> What I am thinking is....
> If it takes roughly 28 feet for a 40hz wave form to develop
> does that mean that that is the optimal distance for micing that
> frequency?
> I figure only about 440hz and higher develop fully within 4 feet of the
> kick
> drum.
> So if i remember correctly a 60hz frequency will go thru one cylce at
> approximately
> 20-30ms into the kick sound.
> So I was wondering if shifting the lower frequencies back towards the
> beginning
> of kick beat by approximately 20-30ms if that would give a more powerful
> kick sound/tone.
> Make sense?
> Anyway I will be trying it.
> Wonder if the same will help bass guitar or any instrument.
> Perhaps I ned to just go to sleep.
>
> B
>

Report message to a moderator

Re: Frequency development micing [message #78043 is a reply to message #78024]

Mon, 08 January 2007 02:07

rick

Messages: 1976
Registered: February 2006

Senior Member

i have my room mics set about 3.6' in in front of the kit and 4' off
the floor using M/S encoding. the overheads are 5' off the floor, 6'
apart and 4' back from the drummer. for a different vibe the room
mics can be placed up to 15' away from the kit and the file is shifted
to approximately the same time as the overheads to reduce some of the
delay which mostly affects the kicks clarity.

On 8 Jan 2007 04:28:32 +1000, "Brandon" <a@a.com> wrote:

>
>Ok... I have been over thinking rock n' roll lately.
>What I am thinking is....
>If it takes roughly 28 feet for a 40hz wave form to develop
>does that mean that that is the optimal distance for micing that frequency?
>I figure only about 440hz and higher develop fully within 4 feet of the kick
>drum.
>So if i remember correctly a 60hz frequency will go thru one cylce at approximately
>20-30ms into the kick sound.
>So I was wondering if shifting the lower frequencies back towards the beginning
>of kick beat by approximately 20-30ms if that would give a more powerful
>kick sound/tone.
>Make sense?
>Anyway I will be trying it.
>Wonder if the same will help bass guitar or any instrument.
>Perhaps I ned to just go to sleep.
>
>B

Report message to a moderator

Previous Topic:	EDS Compressor
Next Topic:	Good deal on mic drum kit

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Feb 05 13:52:09 PST 2025

Total time taken to generate the page: 0.00774 seconds