Home » The PARIS Forums » PARIS: Main » Found the solution: EDS Compressor Problem
|
|
|
|
|
|
Re: Found the solution: EDS Compressor Problem [message #87183 is a reply to message #87167] |
Mon, 25 June 2007 14:31 |
Mark[1]
Messages: 2 Registered: June 2007
|
Junior Member |
|
|
I think PC Freebies was the problem - although right now just for
troubleshooting, I also removed FreakQ, I did previously have that running
with no problem.
"PaulN" <pn@nospam.com> wrote in message news:467fcd01$1@linux...
>
> My experience is that "PC Freebies" is the culpret. I had all kinds of
> weirdness
> going on until I uninstalled them.
>
>
> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>FreakQ is the one that seemed to cause the most issues I believe, and it
>
>>seemed like there was a little 3 pack that had something in it that
>>created
>
>>issues, name escapes me at the moment. Define "all" of them that you
>>installed and I can likely pick the one out.
>>
>>AA
>>
>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>news:467fb883$1@linux...
>>>I had installed all of the skunkworks plugs - I removed all but the
>>>eventiter and the mods.
>>>
>>> I really love the plugs and as time permits, I'll start adding them in
>
>>> again until I isolate which one was causing the problem on my computer.
>>>
>>>
>>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>>> news:467ea667@linux...
>>>>I hadn't seen that reaction yet, but I think some of the skunkworks
>>>>plugs
>
>>>>were deemed too buggy and it was suggested to not install them. Which
> of
>>>>them did you have installed?
>>>>
>>>> AA
>>>>
>>>>
>>>> "Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>> news:467e51e8@linux...
>>>>>I sure appreciate all the helpful tips posted here and wanted to share
>
>>>>>that I found the solution to a problem when I migrated Paris to Windows
>
>>>>>XP Pro.
>>>>>
>>>>> The problem was that the EDS compressors were not working for the
>>>>> channel inserts. It was frustrating since I really like using them and
>
>>>>> all the other insert efx were working.
>>>>>
>>>>> I'm a big fan of Chuck's plugins and had installed all of them.
>>>>> Unfortunately, on my box, there was a conflict. When I removed all but
>
>>>>> the basic EDS effects dlls from the system32 folder the compressors
>
>>>>> worked again.
>>>>>
>>>>> I still have the eventiter and modulation efx working so that good
>>>>> since
>
>>>>> I like them alot too.
>>>>>
>>>>> Anyways, since I had posted in the midst of my confusion, thought I
> post
>>>>> the solution too.
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
|
|
|
Re: Found the solution: EDS Compressor Problem [message #87189 is a reply to message #87183] |
Mon, 25 June 2007 16:46 |
Aaron Allen
Messages: 1988 Registered: May 2008
|
Senior Member |
|
|
right, remembering more of it now.... FreakQ was the one that would foul up
on the lo pass band.. I think. Jeez. Old age sucks, heh...
PC Freebies was the one Chuck said to not install.
AA
"Mark" <mark47366@yahoo.com> wrote in message news:468035cb$1@linux...
>I think PC Freebies was the problem - although right now just for
>troubleshooting, I also removed FreakQ, I did previously have that running
>with no problem.
>
>
>
> "PaulN" <pn@nospam.com> wrote in message news:467fcd01$1@linux...
>>
>> My experience is that "PC Freebies" is the culpret. I had all kinds of
>> weirdness
>> going on until I uninstalled them.
>>
>>
>> "Aaron Allen" <know-spam@not_here.dude> wrote:
>>>FreakQ is the one that seemed to cause the most issues I believe, and it
>>
>>>seemed like there was a little 3 pack that had something in it that
>>>created
>>
>>>issues, name escapes me at the moment. Define "all" of them that you
>>>installed and I can likely pick the one out.
>>>
>>>AA
>>>
>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>news:467fb883$1@linux...
>>>>I had installed all of the skunkworks plugs - I removed all but the
>>>>eventiter and the mods.
>>>>
>>>> I really love the plugs and as time permits, I'll start adding them in
>>
>>>> again until I isolate which one was causing the problem on my computer.
>>>>
>>>>
>>>> "Aaron Allen" <know-spam@not_here.dude> wrote in message
>>>> news:467ea667@linux...
>>>>>I hadn't seen that reaction yet, but I think some of the skunkworks
>>>>>plugs
>>
>>>>>were deemed too buggy and it was suggested to not install them. Which
>> of
>>>>>them did you have installed?
>>>>>
>>>>> AA
>>>>>
>>>>>
>>>>> "Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>> news:467e51e8@linux...
>>>>>>I sure appreciate all the helpful tips posted here and wanted to share
>>
>>>>>>that I found the solution to a problem when I migrated Paris to
>>>>>>Windows
>>
>>>>>>XP Pro.
>>>>>>
>>>>>> The problem was that the EDS compressors were not working for the
>>>>>> channel inserts. It was frustrating since I really like using them
>>>>>> and
>>
>>>>>> all the other insert efx were working.
>>>>>>
>>>>>> I'm a big fan of Chuck's plugins and had installed all of them.
>>>>>> Unfortunately, on my box, there was a conflict. When I removed all
>>>>>> but
>>
>>>>>> the basic EDS effects dlls from the system32 folder the compressors
>>
>>>>>> worked again.
>>>>>>
>>>>>> I still have the eventiter and modulation efx working so that good
>>>>>> since
>>
>>>>>> I like them alot too.
>>>>>>
>>>>>> Anyways, since I had posted in the midst of my confusion, thought I
>> post
>>>>>> the solution too.
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>
>
|
|
|
Re: Found the solution: EDS Compressor Problem [message #87197 is a reply to message #87189] |
Mon, 25 June 2007 23:08 |
JeffH
Messages: 307 Registered: October 2007 Location: Wamic, OR
|
Senior Member |
|
|
Aaron
SO here's the list
PC Freebies
1. Sine generator.
2. Volume Control.
3. Comb filter.
PC Value Pack
1. FreakQ
2. BarbEQ
3. KickBack
4. ModPack
5. Nolimit
6. Pseudo
7. Eventiter
Sounds likethe freebies and FreakQ are out. Any others?
Jeff
> right, remembering more of it now.... FreakQ was the one that would foul up
> on the lo pass band.. I think. Jeez. Old age sucks, heh...
> PC Freebies was the one Chuck said to not install.
>
> AA
>
>
> "Mark" <mark47366@yahoo.com> wrote in message news:468035cb$1@linux...
>
>>I think PC Freebies was the problem - although right now just for
>>troubleshooting, I also removed FreakQ, I did previously have that running
>>with no problem.
>>
>>
>>
>>"PaulN" <pn@nospam.com> wrote in message news:467fcd01$1@linux...
>>
>>>My experience is that "PC Freebies" is the culpret. I had all kinds of
>>>weirdness
>>>going on until I uninstalled them.
>>>
>>>
>>>"Aaron Allen" <know-spam@not_here.dude> wrote:
>>>
>>>>FreakQ is the one that seemed to cause the most issues I believe, and it
>>>
>>>>seemed like there was a little 3 pack that had something in it that
>>>>created
>>>
>>>>issues, name escapes me at the moment. Define "all" of them that you
>>>>installed and I can likely pick the one out.
>>>>
>>>>AA
>>>>
>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>news:467fb883$1@linux...
>>>>
>>>>>I had installed all of the skunkworks plugs - I removed all but the
>>>>>eventiter and the mods.
>>>>>
>>>>>I really love the plugs and as time permits, I'll start adding them in
>>>
>>>>>again until I isolate which one was causing the problem on my computer.
>>>>>
>>>>>
>>>>>"Aaron Allen" <know-spam@not_here.dude> wrote in message
>>>>>news:467ea667@linux...
>>>>>
>>>>>>I hadn't seen that reaction yet, but I think some of the skunkworks
>>>>>>plugs
>>>
>>>>>>were deemed too buggy and it was suggested to not install them. Which
>>>
>>>of
>>>
>>>>>>them did you have installed?
>>>>>>
>>>>>>AA
>>>>>>
>>>>>>
>>>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>>>news:467e51e8@linux...
>>>>>>
>>>>>>>I sure appreciate all the helpful tips posted here and wanted to share
>>>
>>>>>>>that I found the solution to a problem when I migrated Paris to
>>>>>>>Windows
>>>
>>>>>>>XP Pro.
>>>>>>>
>>>>>>>The problem was that the EDS compressors were not working for the
>>>>>>>channel inserts. It was frustrating since I really like using them
>>>>>>>and
>>>
>>>>>>>all the other insert efx were working.
>>>>>>>
>>>>>>>I'm a big fan of Chuck's plugins and had installed all of them.
>>>>>>>Unfortunately, on my box, there was a conflict. When I removed all
>>>>>>>but
>>>
>>>>>>>the basic EDS effects dlls from the system32 folder the compressors
>>>
>>>>>>>worked again.
>>>>>>>
>>>>>>>I still have the eventiter and modulation efx working so that good
>>>>>>>since
>>>
>>>>>>>I like them alot too.
>>>>>>>
>>>>>>>Anyways, since I had posted in the midst of my confusion, thought I
>>>
>>>post
>>>
>>>>>>>the solution too.
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>
>
>
|
|
|
Re: Found the solution: EDS Compressor Problem [message #87198 is a reply to message #87197] |
Tue, 26 June 2007 00:14 |
Aaron Allen
Messages: 1988 Registered: May 2008
|
Senior Member |
|
|
Memory serving, that is all but I think I recall a little bug in NoLimit
with the outer reaches of timeline that cause problems. I'd have to fire up
the Paris rig out in the studio to say for sure, but fully clockwise and/or
fully counterclockwise I think brought about issues when adjusting
lookahead. Otherwise the plug was fine and, IMHO, awesome at what it does.
AA
"Jeff Hoover" <jkhoover@excite.com> wrote in message news:4680af00@linux...
> Aaron
>
> SO here's the list
>
> PC Freebies
> 1. Sine generator.
> 2. Volume Control.
> 3. Comb filter.
>
> PC Value Pack
> 1. FreakQ
> 2. BarbEQ
> 3. KickBack
> 4. ModPack
> 5. Nolimit
> 6. Pseudo
> 7. Eventiter
>
> Sounds likethe freebies and FreakQ are out. Any others?
>
> Jeff
>
>
>> right, remembering more of it now.... FreakQ was the one that would foul
>> up on the lo pass band.. I think. Jeez. Old age sucks, heh...
>> PC Freebies was the one Chuck said to not install.
>>
>> AA
>>
>>
>> "Mark" <mark47366@yahoo.com> wrote in message news:468035cb$1@linux...
>>
>>>I think PC Freebies was the problem - although right now just for
>>>troubleshooting, I also removed FreakQ, I did previously have that
>>>running with no problem.
>>>
>>>
>>>
>>>"PaulN" <pn@nospam.com> wrote in message news:467fcd01$1@linux...
>>>
>>>>My experience is that "PC Freebies" is the culpret. I had all kinds of
>>>>weirdness
>>>>going on until I uninstalled them.
>>>>
>>>>
>>>>"Aaron Allen" <know-spam@not_here.dude> wrote:
>>>>
>>>>>FreakQ is the one that seemed to cause the most issues I believe, and
>>>>>it
>>>>
>>>>>seemed like there was a little 3 pack that had something in it that
>>>>>created
>>>>
>>>>>issues, name escapes me at the moment. Define "all" of them that you
>>>>>installed and I can likely pick the one out.
>>>>>
>>>>>AA
>>>>>
>>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>>news:467fb883$1@linux...
>>>>>
>>>>>>I had installed all of the skunkworks plugs - I removed all but the
>>>>>>eventiter and the mods.
>>>>>>
>>>>>>I really love the plugs and as time permits, I'll start adding them in
>>>>
>>>>>>again until I isolate which one was causing the problem on my
>>>>>>computer.
>>>>>>
>>>>>>
>>>>>>"Aaron Allen" <know-spam@not_here.dude> wrote in message
>>>>>>news:467ea667@linux...
>>>>>>
>>>>>>>I hadn't seen that reaction yet, but I think some of the skunkworks
>>>>>>>plugs
>>>>
>>>>>>>were deemed too buggy and it was suggested to not install them. Which
>>>>
>>>>of
>>>>
>>>>>>>them did you have installed?
>>>>>>>
>>>>>>>AA
>>>>>>>
>>>>>>>
>>>>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>>>>news:467e51e8@linux...
>>>>>>>
>>>>>>>>I sure appreciate all the helpful tips posted here and wanted to
>>>>>>>>share
>>>>
>>>>>>>>that I found the solution to a problem when I migrated Paris to
>>>>>>>>Windows
>>>>
>>>>>>>>XP Pro.
>>>>>>>>
>>>>>>>>The problem was that the EDS compressors were not working for the
>>>>>>>>channel inserts. It was frustrating since I really like using them
>>>>>>>>and
>>>>
>>>>>>>>all the other insert efx were working.
>>>>>>>>
>>>>>>>>I'm a big fan of Chuck's plugins and had installed all of them.
>>>>>>>>Unfortunately, on my box, there was a conflict. When I removed all
>>>>>>>>but
>>>>
>>>>>>>>the basic EDS effects dlls from the system32 folder the compressors
>>>>
>>>>>>>>worked again.
>>>>>>>>
>>>>>>>>I still have the eventiter and modulation efx working so that good
>>>>>>>>since
>>>>
>>>>>>>>I like them alot too.
>>>>>>>>
>>>>>>>>Anyways, since I had posted in the midst of my confusion, thought I
>>>>
>>>>post
>>>>
>>>>>>>>the solution too.
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>
>>
|
|
|
Re: Found the solution: EDS Compressor Problem [message #87206 is a reply to message #87198] |
Tue, 26 June 2007 06:46 |
Rod Lincoln
Messages: 883 Registered: September 2005
|
Senior Member |
|
|
That's correct, stay away from 50ms lookahead, which is all the way to the
right.
Rod
"Aaron Allen" <know-spam@not_here.dude> wrote:
>Memory serving, that is all but I think I recall a little bug in NoLimit
>with the outer reaches of timeline that cause problems. I'd have to fire
up
>the Paris rig out in the studio to say for sure, but fully clockwise and/or
>fully counterclockwise I think brought about issues when adjusting
>lookahead. Otherwise the plug was fine and, IMHO, awesome at what it does.
>
>AA
>
>
>"Jeff Hoover" <jkhoover@excite.com> wrote in message news:4680af00@linux...
>> Aaron
>>
>> SO here's the list
>>
>> PC Freebies
>> 1. Sine generator.
>> 2. Volume Control.
>> 3. Comb filter.
>>
>> PC Value Pack
>> 1. FreakQ
>> 2. BarbEQ
>> 3. KickBack
>> 4. ModPack
>> 5. Nolimit
>> 6. Pseudo
>> 7. Eventiter
>>
>> Sounds likethe freebies and FreakQ are out. Any others?
>>
>> Jeff
>>
>>
>>> right, remembering more of it now.... FreakQ was the one that would foul
>>> up on the lo pass band.. I think. Jeez. Old age sucks, heh...
>>> PC Freebies was the one Chuck said to not install.
>>>
>>> AA
>>>
>>>
>>> "Mark" <mark47366@yahoo.com> wrote in message news:468035cb$1@linux...
>>>
>>>>I think PC Freebies was the problem - although right now just for
>>>>troubleshooting, I also removed FreakQ, I did previously have that
>>>>running with no problem.
>>>>
>>>>
>>>>
>>>>"PaulN" <pn@nospam.com> wrote in message news:467fcd01$1@linux...
>>>>
>>>>>My experience is that "PC Freebies" is the culpret. I had all kinds
of
>>>>>weirdness
>>>>>going on until I uninstalled them.
>>>>>
>>>>>
>>>>>"Aaron Allen" <know-spam@not_here.dude> wrote:
>>>>>
>>>>>>FreakQ is the one that seemed to cause the most issues I believe, and
>>>>>>it
>>>>>
>>>>>>seemed like there was a little 3 pack that had something in it that
>>>>>>created
>>>>>
>>>>>>issues, name escapes me at the moment. Define "all" of them that you
>>>>>>installed and I can likely pick the one out.
>>>>>>
>>>>>>AA
>>>>>>
>>>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>>>news:467fb883$1@linux...
>>>>>>
>>>>>>>I had installed all of the skunkworks plugs - I removed all but the
>>>>>>>eventiter and the mods.
>>>>>>>
>>>>>>>I really love the plugs and as time permits, I'll start adding them
in
>>>>>
>>>>>>>again until I isolate which one was causing the problem on my
>>>>>>>computer.
>>>>>>>
>>>>>>>
>>>>>>>"Aaron Allen" <know-spam@not_here.dude> wrote in message
>>>>>>>news:467ea667@linux...
>>>>>>>
>>>>>>>>I hadn't seen that reaction yet, but I think some of the skunkworks
>>>>>>>>plugs
>>>>>
>>>>>>>>were deemed too buggy and it was suggested to not install them. Which
>>>>>
>>>>>of
>>>>>
>>>>>>>>them did you have installed?
>>>>>>>>
>>>>>>>>AA
>>>>>>>>
>>>>>>>>
>>>>>>>>"Mark" <sharonaloveslife@yahoo.com> wrote in message
>>>>>>>>news:467e51e8@linux...
>>>>>>>>
>>>>>>>>>I sure appreciate all the helpful tips posted here and wanted to
>>>>>>>>>share
>>>>>
>>>>>>>>>that I found the solution to a problem when I migrated Paris to
>>>>>>>>>Windows
>>>>>
>>>>>>>>>XP Pro.
>>>>>>>>>
>>>>>>>>>The problem was that the EDS compressors were not working for the
>>>>>>>>>channel inserts. It was frustrating since I really like using them
>>>>>>>>>and
>>>>>
>>>>>>>>>all the other insert efx were working.
>>>>>>>>>
>>>>>>>>>I'm a big fan of Chuck's plugins and had installed all of them.
>>>>>>>>>Unfortunately, on my box, there was a conflict. When I removed all
>>>>>>>>>but
>>>>>
>>>>>>>>>the basic EDS effects dlls from the system32 folder the compressors
>>>>>
>>>>>>>>>worked again.
>>>>>>>>>
>>>>>>>>>I still have the eventiter and modulation efx working so that good
>>>>>>>>>since
>>>>>
>>>>>>>>>I like them alot too.
>>>>>>>>>
>>>>>>>>>Anyways, since I had posted in the midst of my confusion, thought
I
>>>>>
>>>>>post
>>>>>
>>>>>>>>>the solution too.
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>
>>>
>
|
|
|
Goto Forum:
Current Time: Sun Dec 29 16:29:33 PST 2024
Total time taken to generate the page: 0.03075 seconds
|