Home » The PARIS Forums » PARIS: Main » Any of you guys overclockers or understand voltage-CPU cycles?
|
|
|
Re: Any of you guys overclockers or understand voltage-CPU cycles? [message #74599 is a reply to message #74597] |
Sat, 21 October 2006 17:32 |
animix
Messages: 356 Registered: September 2006
|
Senior Member |
|
|
Chris,
I just want to get it clocked above 200MHZ right now. that's it's default
and it has the most recent bios already. what would the voltage settings be
to get this puppy to 2100 mHZ?
Thanks,
Deej
"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:453aa792$1@linux...
> Never mind i saw it in the other post.
> Before you start toying with over clocking make sure you did these
> things. They will increase the odds for stability with the Paris and
> over clocking.
>
> 1. Make sure you have the most current BIOS.
> 2. Use the the newest Nividia motherboard chipset driver s from Nvidias
> website.
> 3. Install AMD dual core optimizer driver from AMDs website.
> Install MIcrosoft CPU Hotfix driver.
> 4. Install current Nividia video driver
> 5. Install all the latest xp updates. Use the custom option. "Install
> the framework 2.0 last"
> 6. Do XP tweaks
>
>
> Install the Paris stuff and see if it works before you start fooling
> around. I would also suggest doing a system image before you start over
> clocking, especially if you get paris working OK. Over clocking to far
> will some time hose your xp install.
>
> Chris
>
>
>
>
> Chris Ludwig wrote:
>
> > HI DJ,
> > Which motherboard was it again?
> >
> > Chris
> >
> >
> > DJ wrote:
> >
> >> I'm no overclocker (or any kind of clocker I guess). I'm testing a
mobo,
> >> getting ready to load Windows on this beast and when the system
> >> posts, the
> >> AMD 4200 dual core is showing up at 200mhz. If I boot to the bios
> >> there are
> >> clock settings but I'm an idiot and don't know what to set to get tis
> >> thing
> >> happening at 2100MHZ........and since I blow stuff up sometimes, I
> >> want to
> >> at least get some advice before I fry the CPU. I'll be testing a 3 card
> >> Paris system on this rig to see how/if it can work with dual core
> >> CPU's and
> >> multiple C-16's so so if anyone wants to pitch in, please give me a
ring
> >>
> >> 970-375-7081
> >>
> >> Thanks,
> >>
> >> Deej
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
>
> --
> Chris Ludwig
> ADK
> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> www.adkproaudio.com <http://www.adkproaudio.com/>
> (859) 635-5762
|
|
|
Re: Any of you guys overclockers or understand voltage-CPU cycles? [message #74614 is a reply to message #74599] |
Sun, 22 October 2006 07:31 |
IOUOI
Messages: 38 Registered: June 2007
|
Member |
|
|
Deej, 200 MHz is the core cycle setting ONLY... it's an
internal setting on the CPU, not the CPU speed itself - you can
look at it as kinda like a baseline reference point. It doesn't
mean the normal operating speed of the CPU. Your processor will
run at it's stated speed with this setting.
It's when you get into the settings higher than that that you
start overclocking. Chris is right, get the thing booted up &
stable before you start tweaking with overperformance. Boot it
up & load a heavy project with the settings just as they are...
you'll see, it'll be fine - if the processor itself were only
running @ 200mhz, you'd never be able to load more than a few
tracks & a few plugins.
Neil
"DJ" <notachance@net.net> wrote:
>Chris,
>
>I just want to get it clocked above 200MHZ right now. that's it's default
>and it has the most recent bios already. what would the voltage settings
be
>to get this puppy to 2100 mHZ?
>
>Thanks,
>
>Deej
>
>"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
>news:453aa792$1@linux...
>> Never mind i saw it in the other post.
>> Before you start toying with over clocking make sure you did these
>> things. They will increase the odds for stability with the Paris and
>> over clocking.
>>
>> 1. Make sure you have the most current BIOS.
>> 2. Use the the newest Nividia motherboard chipset driver s from Nvidias
>> website.
>> 3. Install AMD dual core optimizer driver from AMDs website.
>> Install MIcrosoft CPU Hotfix driver.
>> 4. Install current Nividia video driver
>> 5. Install all the latest xp updates. Use the custom option. "Install
>> the framework 2.0 last"
>> 6. Do XP tweaks
>>
>>
>> Install the Paris stuff and see if it works before you start fooling
>> around. I would also suggest doing a system image before you start over
>> clocking, especially if you get paris working OK. Over clocking to far
>> will some time hose your xp install.
>>
>> Chris
>>
>>
>>
>>
>> Chris Ludwig wrote:
>>
>> > HI DJ,
>> > Which motherboard was it again?
>> >
>> > Chris
>> >
>> >
>> > DJ wrote:
>> >
>> >> I'm no overclocker (or any kind of clocker I guess). I'm testing a
>mobo,
>> >> getting ready to load Windows on this beast and when the system
>> >> posts, the
>> >> AMD 4200 dual core is showing up at 200mhz. If I boot to the bios
>> >> there are
>> >> clock settings but I'm an idiot and don't know what to set to get tis
>> >> thing
>> >> happening at 2100MHZ........and since I blow stuff up sometimes, I
>> >> want to
>> >> at least get some advice before I fry the CPU. I'll be testing a 3
card
>> >> Paris system on this rig to see how/if it can work with dual core
>> >> CPU's and
>> >> multiple C-16's so so if anyone wants to pitch in, please give me a
>ring
>> >>
>> >> 970-375-7081
>> >>
>> >> Thanks,
>> >>
>> >> Deej
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >
>>
>> --
>> Chris Ludwig
>> ADK
>> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>> www.adkproaudio.com <http://www.adkproaudio.com/>
>> (859) 635-5762
>
>
|
|
|
Re: Any of you guys overclockers or understand voltage-CPU cycles? [message #74616 is a reply to message #74599] |
Sun, 22 October 2006 08:15 |
Chris Ludwig
Messages: 868 Registered: May 2006
|
Senior Member |
|
|
HI DJ,
200mhz is the proper FSB multiplier settings. If it is above that then
you are over clocking.
The MB Intelligent Tweaker section of the BIOS should running defaults.
CPU Clock Ratio = Auto
CPU Over clock in MHz = 200
AGP Over clock in MHz = 66
All the voltage controls = normal
This will be the default non -over clocked settings.
Chris
DJ wrote:
>Chris,
>
>I just want to get it clocked above 200MHZ right now. that's it's default
>and it has the most recent bios already. what would the voltage settings be
>to get this puppy to 2100 mHZ?
>
>Thanks,
>
>Deej
>
>"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
>news:453aa792$1@linux...
>
>
>>Never mind i saw it in the other post.
>>Before you start toying with over clocking make sure you did these
>>things. They will increase the odds for stability with the Paris and
>>over clocking.
>>
>>1. Make sure you have the most current BIOS.
>>2. Use the the newest Nividia motherboard chipset driver s from Nvidias
>>website.
>>3. Install AMD dual core optimizer driver from AMDs website.
>>Install MIcrosoft CPU Hotfix driver.
>>4. Install current Nividia video driver
>>5. Install all the latest xp updates. Use the custom option. "Install
>>the framework 2.0 last"
>>6. Do XP tweaks
>>
>>
>>Install the Paris stuff and see if it works before you start fooling
>>around. I would also suggest doing a system image before you start over
>>clocking, especially if you get paris working OK. Over clocking to far
>>will some time hose your xp install.
>>
>>Chris
>>
>>
>>
>>
>>Chris Ludwig wrote:
>>
>>
>>
>>>HI DJ,
>>>Which motherboard was it again?
>>>
>>>Chris
>>>
>>>
>>>DJ wrote:
>>>
>>>
>>>
>>>>I'm no overclocker (or any kind of clocker I guess). I'm testing a
>>>>
>>>>
>mobo,
>
>
>>>>getting ready to load Windows on this beast and when the system
>>>>posts, the
>>>>AMD 4200 dual core is showing up at 200mhz. If I boot to the bios
>>>>there are
>>>>clock settings but I'm an idiot and don't know what to set to get tis
>>>>thing
>>>>happening at 2100MHZ........and since I blow stuff up sometimes, I
>>>>want to
>>>>at least get some advice before I fry the CPU. I'll be testing a 3 card
>>>>Paris system on this rig to see how/if it can work with dual core
>>>>CPU's and
>>>>multiple C-16's so so if anyone wants to pitch in, please give me a
>>>>
>>>>
>ring
>
>
>>>>970-375-7081
>>>>
>>>>Thanks,
>>>>
>>>>Deej
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>--
>>Chris Ludwig
>>ADK
>>chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
>>www.adkproaudio.com <http://www.adkproaudio.com/>
>>(859) 635-5762
>>
>>
>
>
>
>
--
Chris Ludwig
ADK
chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
www.adkproaudio.com <http://www.adkproaudio.com/>
(859) 635-5762
|
|
|
Re: Any of you guys overclockers or understand voltage-CPU cycles? [message #74626 is a reply to message #74616] |
Sun, 22 October 2006 11:13 |
animix
Messages: 356 Registered: September 2006
|
Senior Member |
|
|
OK then guys. Thanks for the help.
;o)
"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
news:453b8917$1@linux...
> HI DJ,
> 200mhz is the proper FSB multiplier settings. If it is above that then
> you are over clocking.
>
> The MB Intelligent Tweaker section of the BIOS should running defaults.
> CPU Clock Ratio = Auto
> CPU Over clock in MHz = 200
> AGP Over clock in MHz = 66
> All the voltage controls = normal
>
> This will be the default non -over clocked settings.
>
>
> Chris
>
>
> DJ wrote:
>
> >Chris,
> >
> >I just want to get it clocked above 200MHZ right now. that's it's default
> >and it has the most recent bios already. what would the voltage settings
be
> >to get this puppy to 2100 mHZ?
> >
> >Thanks,
> >
> >Deej
> >
> >"Chris Ludwig" <chrisl@adkproaudio.com> wrote in message
> >news:453aa792$1@linux...
> >
> >
> >>Never mind i saw it in the other post.
> >>Before you start toying with over clocking make sure you did these
> >>things. They will increase the odds for stability with the Paris and
> >>over clocking.
> >>
> >>1. Make sure you have the most current BIOS.
> >>2. Use the the newest Nividia motherboard chipset driver s from Nvidias
> >>website.
> >>3. Install AMD dual core optimizer driver from AMDs website.
> >>Install MIcrosoft CPU Hotfix driver.
> >>4. Install current Nividia video driver
> >>5. Install all the latest xp updates. Use the custom option. "Install
> >>the framework 2.0 last"
> >>6. Do XP tweaks
> >>
> >>
> >>Install the Paris stuff and see if it works before you start fooling
> >>around. I would also suggest doing a system image before you start over
> >>clocking, especially if you get paris working OK. Over clocking to far
> >>will some time hose your xp install.
> >>
> >>Chris
> >>
> >>
> >>
> >>
> >>Chris Ludwig wrote:
> >>
> >>
> >>
> >>>HI DJ,
> >>>Which motherboard was it again?
> >>>
> >>>Chris
> >>>
> >>>
> >>>DJ wrote:
> >>>
> >>>
> >>>
> >>>>I'm no overclocker (or any kind of clocker I guess). I'm testing a
> >>>>
> >>>>
> >mobo,
> >
> >
> >>>>getting ready to load Windows on this beast and when the system
> >>>>posts, the
> >>>>AMD 4200 dual core is showing up at 200mhz. If I boot to the bios
> >>>>there are
> >>>>clock settings but I'm an idiot and don't know what to set to get tis
> >>>>thing
> >>>>happening at 2100MHZ........and since I blow stuff up sometimes, I
> >>>>want to
> >>>>at least get some advice before I fry the CPU. I'll be testing a 3
card
> >>>>Paris system on this rig to see how/if it can work with dual core
> >>>>CPU's and
> >>>>multiple C-16's so so if anyone wants to pitch in, please give me a
> >>>>
> >>>>
> >ring
> >
> >
> >>>>970-375-7081
> >>>>
> >>>>Thanks,
> >>>>
> >>>>Deej
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>--
> >>Chris Ludwig
> >>ADK
> >>chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> >>www.adkproaudio.com <http://www.adkproaudio.com/>
> >>(859) 635-5762
> >>
> >>
> >
> >
> >
> >
>
> --
> Chris Ludwig
> ADK
> chrisl@adkproaudio.com <mailto:chrisl@adkproaudio.com>
> www.adkproaudio.com <http://www.adkproaudio.com/>
> (859) 635-5762
|
|
|
Goto Forum:
Current Time: Sat Dec 21 18:09:53 PST 2024
Total time taken to generate the page: 0.00988 seconds
|