Well, it might finally be time... [message #102551] |
Tue, 17 February 2009 20:44 |
|
My alternate G4, which I use in the studio for Digital Performer and outside
the studio for the occasional remote, has died. Don't know what the problem
is. It might be a simple fix but if it costs more than $50 or so it might
make more sense to replace it. I'm thinking that it might finally be time
to try running Paris on a PC. Kerry tells me I can put a smokin' Paris PC
together for under $200. Can anyone steer me to which bits and pieces would
work? If I were to make this my main studio machine I have a Magma 13 slot
expansion chassis so PCI slots is not an issue. Also, anotgher BIG question
- How would I use my old Mac formatted drives w/ a PC system. Would I have
to somehow copy them all over to PC formatted drives? That's a bit daunting!
Thanks!
Gantt
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
|
|
|
Re: Well, it might finally be time... [message #102607 is a reply to message #102601] |
Fri, 20 February 2009 21:30 |
|
Will MacDrive allow me to actually record and mix from Mac formatted drives
or would I have to copy from the Mac drive to a PC drive?
"Sandy Tipping" <tippsand@earthling.net> wrote:
>Use MacDrive to access your Mac data. Obviously, not the OS or boot stuff,
>but the Paris projects and paf stuff? Macdrive...
>
>"John" <no@no.com> wrote in message news:499c08ee$1@linux...
>>
>> I'm sure others will chime in with more recent setups but here are the
old
>> ones that worked.
>>
>> http://www.kfocus.com/paris/
>>
>> read the _setup section....motherboards......brian tankersley
>> setup....etc...
>
>
Gantt Kushner
Gizmo Recording Company
Silver Spring, MD
www.gizmorecording.com
|
|
|
Re: Well, it might finally be time... [message #102608 is a reply to message #102607] |
Sat, 21 February 2009 07:17 |
Neil
Messages: 1645 Registered: April 2006
|
Senior Member |
|
|
It allows to you to open/read & copy files from a mac-formatted
drive to your PC's drive(s).
Neil
"Gantt Kushner" <ganttmann@comcast.net> wrote:
>
>Will MacDrive allow me to actually record and mix from Mac formatted drives
>or would I have to copy from the Mac drive to a PC drive?
>
>"Sandy Tipping" <tippsand@earthling.net> wrote:
>>Use MacDrive to access your Mac data. Obviously, not the OS or boot stuff,
>
>>but the Paris projects and paf stuff? Macdrive...
>>
>>"John" <no@no.com> wrote in message news:499c08ee$1@linux...
>>>
>>> I'm sure others will chime in with more recent setups but here are the
>old
>>> ones that worked.
>>>
>>> http://www.kfocus.com/paris/
>>>
>>> read the _setup section....motherboards......brian tankersley
>>> setup....etc...
>>
>>
>
|
|
|