The PARIS Forums: PARIS: Main » Help needed re WordClock

Home » The PARIS Forums » PARIS: Main » Help needed re WordClock

Show: Today's Messages :: Polls :: Message Navigator

Help needed re WordClock [message #81801]

Tue, 20 March 2007 08:41

hank
Messages: 25
Registered: August 2005

Junior Member

Ive done the config file bit( UseHousesync=1) opened up Paris from within
the folder so I can change it to wordclock and then save as a default file.
i get a lashing red sync
in the project window and all my cards on the MEC keep flashing red.
Sometimes I cant load Paris as I get the message :engine cant etc check leads."
I then take the string out of the config file and it loads up. I try to change
to word clock and I get flashing red sync plus cards flash. Ive tried it
with Big Beb in off, on without and i cant change to word clock ,both MEC's
flash. ive reinstalled paris twice. Has anyone had the wordclock input ever
fail on a MEC
Hope someone can help
Hank

Report message to a moderator

Re: Help needed re WordClock [message #81803 is a reply to message #81801]

Tue, 20 March 2007 07:53

EK Sound

Messages: 939
Registered: June 2005

Senior Member

"both MEC's"... you realize you only need the house sync line if you
have three or more MEC's right??? Do yourself a favour, remove the
line in the config file, feed external clock the the first MEC, loop
to the second and be done. Simply set the project to word clock
sync... we've been doing it that way for years with "0" trouble.

David.

hank wrote:
> Ive done the config file bit( UseHousesync=1) opened up Paris from within
> the folder so I can change it to wordclock and then save as a default file.
> i get a lashing red sync
> in the project window and all my cards on the MEC keep flashing red.
> Sometimes I cant load Paris as I get the message :engine cant etc check leads."
> I then take the string out of the config file and it loads up. I try to change
> to word clock and I get flashing red sync plus cards flash. Ive tried it
> with Big Beb in off, on without and i cant change to word clock ,both MEC's
> flash. ive reinstalled paris twice. Has anyone had the wordclock input ever
> fail on a MEC
> Hope someone can help
> Hank

Report message to a moderator

Re: Help needed re WordClock [message #81808 is a reply to message #81801]

Tue, 20 March 2007 08:54

Deej [4]

Messages: 1292
Registered: January 2007

Senior Member

If you are using an external WC and your default project is not set to
48KHz, then you will never achieve reliable sync. You have to do
this......or you will die.

"hank" <hkovac@bigpond.net.au> wrote in message news:45fff283$1@linux...
>
> Ive done the config file bit( UseHousesync=1) opened up Paris from within
> the folder so I can change it to wordclock and then save as a default
> file.
> i get a lashing red sync
> in the project window and all my cards on the MEC keep flashing red.
> Sometimes I cant load Paris as I get the message :engine cant etc check
> leads."
> I then take the string out of the config file and it loads up. I try to
> change
> to word clock and I get flashing red sync plus cards flash. Ive tried it
> with Big Beb in off, on without and i cant change to word clock ,both
> MEC's
> flash. ive reinstalled paris twice. Has anyone had the wordclock input
> ever
> fail on a MEC
> Hope someone can help
> Hank

Report message to a moderator

Re: Help needed re WordClock [message #81862 is a reply to message #81808]

Wed, 21 March 2007 08:16

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Hey DJ,
How are you ?
I have read saying that many times !
Hiw come I use external wordclock for over a year now with Usehousesync three
mecs and my default project is always at 44.1 with 0 problems ?
Maybe if I use the 48khz I amy be getting even better ? :)
Regards,
Dimitrios

"DJ" <www.aarrrrggghhh!!!.com> wrote:
>If you are using an external WC and your default project is not set to
>48KHz, then you will never achieve reliable sync. You have to do
>this......or you will die.
>
>"hank" <hkovac@bigpond.net.au> wrote in message news:45fff283$1@linux...
>>
>> Ive done the config file bit( UseHousesync=1) opened up Paris from within
>> the folder so I can change it to wordclock and then save as a default

>> file.
>> i get a lashing red sync
>> in the project window and all my cards on the MEC keep flashing red.
>> Sometimes I cant load Paris as I get the message :engine cant etc check

>> leads."
>> I then take the string out of the config file and it loads up. I try to

>> change
>> to word clock and I get flashing red sync plus cards flash. Ive tried
it
>> with Big Beb in off, on without and i cant change to word clock ,both

>> MEC's
>> flash. ive reinstalled paris twice. Has anyone had the wordclock input

>> ever
>> fail on a MEC
>> Hope someone can help
>> Hank
>
>

Report message to a moderator

Re: Help needed re WordClock [message #81881 is a reply to message #81862]

Wed, 21 March 2007 10:37

Deej [4]

Messages: 1292
Registered: January 2007

Senior Member

How many MECs are you using?

Doing fine BTW?

;o)

"Dimitrios" <musurgio@otenet.gr> wrote in message news:46013e34$1@linux...
>
> Hey DJ,
> How are you ?
> I have read saying that many times !
> Hiw come I use external wordclock for over a year now with Usehousesync
> three
> mecs and my default project is always at 44.1 with 0 problems ?
> Maybe if I use the 48khz I amy be getting even better ? :)
> Regards,
> Dimitrios
>
>
>
>
> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>If you are using an external WC and your default project is not set to
>>48KHz, then you will never achieve reliable sync. You have to do
>>this......or you will die.
>>
>>"hank" <hkovac@bigpond.net.au> wrote in message news:45fff283$1@linux...
>>>
>>> Ive done the config file bit( UseHousesync=1) opened up Paris from
>>> within
>>> the folder so I can change it to wordclock and then save as a default
>
>>> file.
>>> i get a lashing red sync
>>> in the project window and all my cards on the MEC keep flashing red.
>>> Sometimes I cant load Paris as I get the message :engine cant etc check
>
>>> leads."
>>> I then take the string out of the config file and it loads up. I try to
>
>>> change
>>> to word clock and I get flashing red sync plus cards flash. Ive tried
> it
>>> with Big Beb in off, on without and i cant change to word clock ,both
>
>>> MEC's
>>> flash. ive reinstalled paris twice. Has anyone had the wordclock input
>
>>> ever
>>> fail on a MEC
>>> Hope someone can help
>>> Hank
>>
>>
>

Report message to a moderator

Re: Help needed re WordClock [message #81885 is a reply to message #81881]

Wed, 21 March 2007 12:11

Dimitrios

Messages: 1056
Registered: August 2005

Senior Member

Fine thanks !
I have three mecs.
Four adat modules and two in modules.
Regards,
Dimitrios

"DJ" <www.aarrrrggghhh!!!.com> wrote:
>How many MECs are you using?
>
>Doing fine BTW?
>
>;o)
>
>"Dimitrios" <musurgio@otenet.gr> wrote in message news:46013e34$1@linux...
>>
>> Hey DJ,
>> How are you ?
>> I have read saying that many times !
>> Hiw come I use external wordclock for over a year now with Usehousesync

>> three
>> mecs and my default project is always at 44.1 with 0 problems ?
>> Maybe if I use the 48khz I amy be getting even better ? :)
>> Regards,
>> Dimitrios
>>
>>
>>
>>
>> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>>If you are using an external WC and your default project is not set to
>>>48KHz, then you will never achieve reliable sync. You have to do
>>>this......or you will die.
>>>
>>>"hank" <hkovac@bigpond.net.au> wrote in message news:45fff283$1@linux...
>>>>
>>>> Ive done the config file bit( UseHousesync=1) opened up Paris from
>>>> within
>>>> the folder so I can change it to wordclock and then save as a default
>>
>>>> file.
>>>> i get a lashing red sync
>>>> in the project window and all my cards on the MEC keep flashing red.
>>>> Sometimes I cant load Paris as I get the message :engine cant etc check
>>
>>>> leads."
>>>> I then take the string out of the config file and it loads up. I try
to
>>
>>>> change
>>>> to word clock and I get flashing red sync plus cards flash. Ive tried
>> it
>>>> with Big Beb in off, on without and i cant change to word clock ,both
>>
>>>> MEC's
>>>> flash. ive reinstalled paris twice. Has anyone had the wordclock input
>>
>>>> ever
>>>> fail on a MEC
>>>> Hope someone can help
>>>> Hank
>>>
>>>
>>
>
>

Report message to a moderator

Re: Help needed re WordClock [message #81897 is a reply to message #81885]

Wed, 21 March 2007 13:15

Deej [4]

Messages: 1292
Registered: January 2007

Senior Member

Hmmm.....I dunno. I could never achieve reliable sync unless I went with the
48k setting in the project.

"Dimitrios" <musurgio@Nospam.otenet.gr> wrote in message
news:4601754b$1@linux...
>
> Fine thanks !
> I have three mecs.
> Four adat modules and two in modules.
> Regards,
> Dimitrios
>
> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>How many MECs are you using?
>>
>>Doing fine BTW?
>>
>>;o)
>>
>>"Dimitrios" <musurgio@otenet.gr> wrote in message news:46013e34$1@linux...
>>>
>>> Hey DJ,
>>> How are you ?
>>> I have read saying that many times !
>>> Hiw come I use external wordclock for over a year now with Usehousesync
>
>>> three
>>> mecs and my default project is always at 44.1 with 0 problems ?
>>> Maybe if I use the 48khz I amy be getting even better ? :)
>>> Regards,
>>> Dimitrios
>>>
>>>
>>>
>>>
>>> "DJ" <www.aarrrrggghhh!!!.com> wrote:
>>>>If you are using an external WC and your default project is not set to
>>>>48KHz, then you will never achieve reliable sync. You have to do
>>>>this......or you will die.
>>>>
>>>>"hank" <hkovac@bigpond.net.au> wrote in message news:45fff283$1@linux...
>>>>>
>>>>> Ive done the config file bit( UseHousesync=1) opened up Paris from
>>>>> within
>>>>> the folder so I can change it to wordclock and then save as a default
>>>
>>>>> file.
>>>>> i get a lashing red sync
>>>>> in the project window and all my cards on the MEC keep flashing red.
>>>>> Sometimes I cant load Paris as I get the message :engine cant etc
>>>>> check
>>>
>>>>> leads."
>>>>> I then take the string out of the config file and it loads up. I try
> to
>>>
>>>>> change
>>>>> to word clock and I get flashing red sync plus cards flash. Ive tried
>>> it
>>>>> with Big Beb in off, on without and i cant change to word clock ,both
>>>
>>>>> MEC's
>>>>> flash. ive reinstalled paris twice. Has anyone had the wordclock input
>>>
>>>>> ever
>>>>> fail on a MEC
>>>>> Hope someone can help
>>>>> Hank
>>>>
>>>>
>>>
>>
>>
>

Report message to a moderator

Previous Topic:	New guitar!
Next Topic:	OT: Fun things to do with a ADK laptop.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 15 22:43:47 PST 2024

Total time taken to generate the page: 0.10208 seconds