The PARIS Forums: PARIS: Main » Just in from Universal Audio

Home » The PARIS Forums » PARIS: Main » Just in from Universal Audio

Show: Today's Messages :: Polls :: Message Navigator

Just in from Universal Audio [message #58807]

Thu, 06 October 2005 12:39

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

>>
>>If not what do we need to do to make this happen?
>>
>>Thanks!
>>
>>Gantt
>>Deej, thanks so much for the in depth response. I too had a U47 and am quite
familiar with the Sony C800G. Anything close to modeling either of those
(in any capacity) would be a nice addition.

Thanks so very much for the tracks. I enjoyed listening to them from a musical
perspective as well as a technical one. I am curious as to the signal path
from mic to Paris for these sessions if you recall. Also, how many interchangeable
capsules are there? I'll check the web to see what I can dig up.

Cool photo...I had not received it under my e-mail account, but noticed the
attachment when I came to respond.

Again, many thanks!

TyroneThe session cancelled, but thanks!

What issues do you suppose I might have had w/ a PC formatted drive?

Gantt

EK Sound wrote:

> 3.0 *can* open 2.2 sessions... it's more involved the other way around.
>
> David.
>
> James McCloskey wrote:
>
> > I believe, you can't open 2.2 Paris files in 3.0. I think you would have
> > to export individual track/files and bring them back in to Paris 3.0.
> >
> > James
> >
> >
> > Gantt Kushner <gizmo@his.com> wrote:
> >
> >>I have a project coming in that was recorded in Paris 2.2 on a
> >>Win XP machine. I run Paris 3.0 on a G4 Mac. If he brings
> >

Report message to a moderator

Re: Just in from Universal Audio [message #58808 is a reply to message #58807]

Thu, 06 October 2005 12:47

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

>me a firewire drive w/ his project on it will my machine "see" it?
> >>
> >>If not what do we need to do to make this happen?
> >>
> >>Thanks!
> >>
> >>Gantt
> >>Hi Tyrone. The signal path is very simple......Mic>Forssell CS-1> Paris A/D
converter. Forssell was set to 1.5:1 compression, attack: 1ms, rel :250ms,
Threshold -16dB, all cabling by Mogami. Bounced in Paris with NoLimit set to
0dB ceiling, threshold -1.1dB. Dithered in Wavelab using Waves IDR and MP3
created in Wavelab.

;o)

Deej

"Tyrone Corbett" <tyronecorbett@comcast.net> wrote in message
news:43458538$1@linux...
>
> Deej, thanks so much for the in depth response. I too had a U47 and am
quite
> familiar with the Sony C800G. Anything close to modeling either of those
> (in any capacity) would be a nice addition.
>
> Thanks so very much for the tracks. I enjoyed listening to them from a
musical
> perspective as well as a technical one. I am curious as to the signal path
> from mic to Paris for these sessions if you recall. Also, how many
interchangeable
> capsules are there? I'll check the web to see what I can dig up.
>
> Cool photo...I had not received it under my e-mail account, but noticed
the
> attachment when I came to respond.
>
> Again, many thanks!
>
> Tyrone
>Hey Gantt,

I have been told (I'm not a MAC guy, well, not since 7.2!) that MAC's
can read NTFS formatted discs for file transfer purposes. This means
you *should* be able to take the PC drive and drag its contents to
your MAC and open them up. The only other issue I can think of would
possibly be file extension naming.

David.

Gantt Kushner wrote:
> The session cancelled, but thanks!
>

Report message to a moderator

Re: Just in from Universal Audio [message #58809 is a reply to message #58808]

Thu, 06 October 2005 12:52

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

r /> > What issues do you suppose I might have had w/ a PC formatted
> drive?
>
> Gantt
>
> EK Sound wrote:
>
>
>> 3.0 *can* open 2.2 sessions... it's more involved the other way
>> around.
>>
>> David.
>>
>> James McCloskey wrote:
>>
>>
>>> I believe, you can't open 2.2 Paris files in 3.0. I think you
>>> would have to export individual track/files and bring them back
>>> in to Paris 3.0.
>>>
>>> James
>>>
>>>
>>> Gantt Kushner <gizmo@his.com> wrote:
>>>
>>>
>>>> I have a project coming in that was recorded in Paris 2.2 on
>>>> a Win XP machine. I run Paris 3.0 on a G4 Mac. If he brings
>>>> me a firewire drive w/ his project on it will my machine
>>>> "see" it?
>>>>
>>>> If not what do we need to do to make this happen?
>>>>
>>>> Thanks!
>>>>
>>>> Gantt
>>>>
>
>I'm running PARIS on W98SE. Has anyone had any problems running any of the
upgradess to the Universal software?

Thanksv4.0 will only work on Win XP

"Gary Flanigan" <gary_flanigan@ce9.uscourts.gov> wrote in message
news:4345b2f6$1@linux...
>
> I'm running PARIS on W98SE. Has anyone had any problems running any of
the
> upgradess to the Universal software?
>
> ThanksTo recap my PC was just giving me lights and fans so I
stripped it down,replaced the power supply,no go.

Took it to the local PC shop who said I had a bad processor.
He said he put in a new processor and it fired back up.

So I've waited about 2 weeks or so to get a new processor;got
it today,installed it and......drum roll-lights and fans;no
change!DAMN!!!DOUBLE DAMN!!!!

Needless to say I will be visiting the local PC shop tommorrow
to "discuss"this matter with them.

Let me go on record saying Morgan at Eastcoast has been nothing
but helpful with this,staying in constant contact and updating
me.Thanks Morgan.

I just have to say for the Mac bashers I never has any problems
like this before I got my PC.Got an old 9600 thats still kicking
it after all these years.Sorry had to rant a little;I know these
probs can happen to anyone on any machine at anytime.

Report message to a moderator

Re: Just in from Universal Audio [message #58810 is a reply to message #58808]

Thu, 06 October 2005 12:53

excelav

Messages: 2130
Registered: July 2005
Location: Metro Detroit

Senior Member

Was it Rick who had the looong Apple saga?

Tune in tommorrow......

PeteI've been watching your issues. Computer problems are incredibly frustrating.
Hang in there. You'll get it sorted...

Cheers,
Kim.

"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>
> To recap my PC was just giving me lights and fans so I
>stripped it down,replaced the power supply,no go.
>
> Took it to the local PC shop who said I had a bad processor.
>He said he put in a new processor and it fired back up.
>
> So I've waited about 2 weeks or so to get a new processor;got
>it today,installed it and......drum roll-lights and fans;no
>change!DAMN!!!DOUBLE DAMN!!!!
>
> Needless to say I will be visiting the local PC shop tommorrow
>to "discuss"this matter with them.
>
> Let me go on record saying Morgan at Eastcoast has been nothing
>but helpful with this,staying in constant contact and updating
>me.Thanks Morgan.
>
> I just have to say for the Mac bashers I never has any problems
>like this before I got my PC.Got an old 9600 thats still kicking
>it after all these years.Sorry had to rant a little;I know these
>probs can happen to anyone on any machine at anytime.
> Was it Rick who had the looong Apple saga?
>
>Tune in tommorrow......
>
>PeteBut, Rick is a die-hard PC guy, and Macs do notice when you try to handle
them
in a PC-sh way;-?

"Pete Ruthenburg" <ruthenburg@sbcglobal.net> wrote:
>
> To recap my PC was just giving me lights and fans so I
>stripped it down,replaced the power supply,no go.
>
> Took it to the local PC shop who said I had a bad processor.
>He said he put in a new processor and it fired back up.
>
> So I've waited about 2 weeks or so to get a new processor;got
>it today,installed it and......drum roll-lights and fans;no
>change!DAMN!!!DOUBLE DAMN!!!!
>
> Needless to say I will be visiting the local PC shop tommorrow
>to "discuss"this matter with them.
>
> Let me go on record saying Morgan at Eastcoast has been nothing
>but helpful with this,staying in constant contact and updating
>me.Thanks Morgan.
>
> I just have to say for the Mac b

Report message to a moderator

Previous Topic:	AES Paris dinner
Next Topic:	Win XP to Mac transfer question!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Feb 13 11:22:12 PST 2025

Total time taken to generate the page: 0.01580 seconds