The PARIS Forums


Home » The PARIS Forums » PARIS: Main » "Celtic Woman" PBS - 4060
"Celtic Woman" PBS - 4060 [message #61185] Sun, 11 December 2005 11:03 Go to next message
gene lennon is currently offline  gene lennon
Messages: 565
Registered: July 2006
Senior Member
ltiplies your mic inventory since you
can
>use the same microphone element on a variety of RF body packs or XLR preamps.
>
>Three sensitivity levels are available: the DPA4060 (134-dB SPL peak); DPA4061
>(144-dB SPL peak); and DPA4062 (154-dB SPL peak). I was sent the most sensitive
>version (the DPA4060) and was unable to overload them with the instruments
>I tried. Really loud situations, however, might require the built-in padding
>of the 4061 or 4062. And for the cosmetically inclined, you can get them
>in black, beige, or white. A point that, while unimportant to most studios,
>is important for on-air talent (...lights, cameras, action!).
>
>
> I tried them on acoustic piano and guitar in the studio, and the sound
>was surprisingly natural considering the small element. But the DPA4060
got
>the MVT Award (Most Valuable Transducer) from me at a live/recording concert
>with Celtic musician Robin Bullock. The C-Ducer contact pickup in his Cittern
>(sort of a round-back, Celtic mandolin) went noisy without a spare in the
>house. We simply taped a DPA4060 near the sound hole, and the sound was
fantastic.
>There was plenty of gain before feedback, and none of the bass build-up
you
>can get with a cardioid mic. Plus, there was none of the brittle string
tone
>you often get with a contact pickup. In fact he liked it so much, I loaned
>him one to take next week on a quick Paris/Germany tour.
>
>The only thing that's needed to make the system complete is a good mounting
>system for instruments. For piano, a pair of soda straws make acceptable
>mini-booms, and some double-sided tape works for acoustic guitar, but these
>are jury-rigs at best that won't make it on the live stage. No, what's needed
>is a variety of clips and mini-booms that can be attached to violins, guitars,
>dulcimers, and banjos. Yes, these mics would be right at home with the Celtic
>and Bluegrass crowd if only there were a quick mounting system that didn't
>require duct tape.
>
>So if you like the sonic integrity of using B&K mics, but used to faint
at
>the price, try out the DPA4060's. They offer a champagne sound to those
on
>a beer budget. Bottom line: A real value, offering tremendous sonic bang
>for the buck.
>
>MANUFACTURER:
>DPA Microphones (formerly known as Bruel & Kjaer). Distributed by TGI North
>America, 300 Gage Avenue, Unit 1, Kitchner, Ontario, Canada N2M 2C8. Tel:
>519-745-1158. Web: www.dpamicrophones.com
>APPLICATION:
>Miniature voice/performance microphones that also can be used for acoustic
>instrument miking.
>SUMMARY:
>Brings legendary B&K sound within price range of every studio.
>STRENGTHS:
>Connection adapters allow mics to be used with a variety of RF body packs
>or standard XLR inputs; different protection grids are supplied that provide
>acoustical equalization for different mic positions on a performer.
>WEAKNESSES:
>No mounts supplied (please don't make me use duct tape again); omni pattern
>only.
>
>
>
---=_linux439c6a03
Content-Type: image/jpeg; name="DPA-4060.jpg"
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename="DPA-4060.jpg"
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Re: "Celtic Woman" PBS - 4060 [message #61186 is a reply to message #61185] Sun, 11 December 2005 11:03 Go to previous messageGo to next message
gene lennon is currently offline  gene lennon
Messages: 565
Registered: July 2006
Senior Member
yWZX3kJN0MfggeqpDTV9QBBEjgp1kfVzO+14LWPM20ex3mPzStZS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---=_linux439c6a03--http://www.geekspeakweekly.com/cowbell/Rendering works:
Under proper (read: in windows, this means no use of certain characters like
#$%^&*()!, etc...) naming conventions.
Only with native effects -DirectX or VST.
In stereo, only if you open the editor and drag a stereo pair - save the
preset you intend to use first.

Be sure that your crossfades are exact on both tracks of the stereo pair.
You can render the track, render to disk and render the section.

If you're using SPDIF, you want to put external inserts on the tracks you
are going to render in a loopback and tap those loops into the next set of
open channels on the same submix, then record to the open channels. This
will include any effects, including VST, DX and EDS that are inserted before
the external loop on the tracks to be rendered. BTW, you can also do this
trick with adat ports and any analog I/O you have. Adat is typically my
preferred method if I have a lot of tracks to render, and SPDIF if I want a
24 bit render clone.

I probably forgot some details in this but I'm pretty tied at the moment
packing boxes to move into a new house :)

AA


>
> "John" <no@no.com> wrote in message news:439c2a4d@linux...
>>I was testing Rendering last night and Render appears to work. My notes
>>say it doesn't. Can anyone enlighten me on the status of Render? From
>>the Editor window Render to Selection without Native Effects and Render to
>>Selection WITH Native Effects both appear o work. So, what is your
>>experience with Render?
>>
>>
>> I also tried the SPDIF trick listed below and it worked for 1 track but
>> when I tried a stereo track (two tracks) with Native effects crossing
>> them when I add the 2nd EDS External effect I get an Insert error but the
>> Render still appears to work. So, tell me what works for you guys
>> please.
>>
>> Can you render Native, EDS and EQ? Is that possible?
>>
>> Here's my SPDIF notes:
>>
>>
>> SPDIF Rendering
>> --------------------------
>> Patchbay workaround for bouncing tracks and rendering plugins
>>
>> Tired of zeroing/clearing a mix to bounce a track or tracks to a new
>> file? Or wish you could render native plugins while listening and
>> adjusting in context. No problem.
>>
>> Open the Patch Bay. Clear all your SPDIF I/O connections. Physically (as
>> in, on the back of your Paris 442 or MEC) loop your Paris SPDIF in to
>> your Paris SPDIF out with a short cable. Go back to the Patch Bay.
>>
>> In the Patch Bay, connect the "Mixer Insert" SEND of the source channel
>> for the bounce to the left SPDIF output (dL) on your 442 or MEC. Connect
>> the SPDIF left input (dL) back to the same channel's "Mixer Insert"
>> Return to complete the loop. Now connect the same left SPDIF output to
>> the "Submixer Input" of the Destination channel you want to bounce/record
>> to. Select "External" on the EDS insert on the source channel.
>>
>> Enable Record on the Destination channel. That's it. Bounce away. You
>> can use your mixer normally while you bounce with no ill effect. And in a
>> case of good fortune, since the EDS inserts are after the native inserts,
>> any active plugins will be printed while bouncing. Great for rendering
>> AutoTune or various other plugin settings for different song sections.
>> For the price of time and disk space, you have unlimited plugins.
>>
>> Example. You have a track on track 10 and you want to render this to
>> track 11. In the Patchbay:
>> Mixer-A channel 11 connects to MEC-Master-A Digital In Left
>> MEC-Master-A Digital In Left connects to Mixer-A-Insert Return10
>> MEC-Master-A Digital Out Left connects to Mixer-A-Insert Send10
>> Select "External" on the EDS insert on the source channel.
>>
>> You can do the same thing with an ADAT card by looping the in and out
>> with a lightpipe cable, but it will be 16 bit only. Also, you can save
>> Patch Bay setups in your default song for all your likely bouncing
>> scenarios.
>
>It is broken in 3.00... every version that included that feature leading up
to that point works fine.
AA


"John" <no@no.com> wrote in message news:439c2b61@linux...
> My notes also show that Compacting is broken. Is that accurate?
>
> How to delete files on hard drive that are NOT used in the project. No
> objects exit on the playing field and no segments exist in the audio
> window but when I pick Select Unused Files from the Audio window nothing
> is selected.
>
> I recorded a bunch of tracks in constrained mode and then removed the
> objects from the playing field and their segments from the Audio window so
> that only the filename was left. So, is there a way to get Paris to clean
> up unused items? Am I missing something?
>
> Thanks,
> JohnWhen I was using Paris, I used render all the time, especially with
Voiceover, Doco work, and it never failed.
I could never understand why some couldn't get it to work properly.
I guess it's like some people can't get Paris to run on XP...To me, it was
at it's best on XP.
Different strokes for different folks, I guess.
--
Martin Harrington
www.lendanear-sound.com

"John" <no@no.com> wrote in message news:439c2a4d@linux...
>I was testing Rendering last night and Render appears to work. My notes
>say it doesn't. Can anyone enlighten me on the status of Render? From the
>Editor window Render to Selection without Native Effects and Render to
>Selection WITH Native Effects both appear o work. So, what is your
>experience with Render?
>
>
> I also tried the SPDIF trick listed below and it worked for 1 track but
> when I tried a stereo track (two tracks) with Native effects crossing them
> when I add the 2nd EDS External effect I get an Insert error but the
> Render still appears to work. So, tell me what works for you guys please.
>
> Can you render Native, EDS and EQ? Is that possible?
>
> Here's my SPDIF notes:
>
>
> SPDIF Rendering
> --------------------------
> Patchbay workaround for bouncing tracks and rendering plugins
>
> Tired of zeroing/clearing a mix to bounce a track or tracks to a new file?
> Or wish you could render native plugins while listening and adjusting in
> context. No problem.
>
> Open the Patch Bay. Clear all your SPDIF I/O connections. Physically (as
> in, on the back of your Paris 442 or MEC) loop your Paris SPDIF in to your
> Paris SPDIF out with a short cable. Go back to the Patch Bay.
>
> In the Patch Bay, connect the "Mixer Insert" SEND of the source channel
> for the bounce to the left SPDIF output (dL) on your 442 or MEC. Connect
> the SPDIF left input (dL) back to the same channel's "Mixer Insert" Return
> to complete the loop. Now connect the same left SPDIF output to the
> "Submixer Input" of the Destination channel you want to bounce/record to.
> Select "External" on the EDS insert on the source channel.
>
> Enable Record on the Destination channel. That's it. Bounce away. You can
> use your mixer normally while you bounce with no ill effect. And in a case
> of good fortune, since the EDS inserts are after the native inserts, any
> active plugins will be printed while bouncing. Great for rendering
> AutoTune or various other plugin settings for different song sections. For
> the price of time and disk space, you have unlimited plugins.
>
> Example. You have a track on track 10 and you want to render this to
> track 11. In the Patchbay:
> Mixer-A channel 11 connects to MEC-Master-A Digital In Left
> MEC-Master-A Digital In Left connects to Mixer-A-Insert Return10
> MEC-Master-A Digital Out Left connects to Mixer-A-Insert Send10
> Select "External" on the EDS insert on the source channel.
>
> You can do the same thing with an ADAT card by looping the in and out with
> a lightpipe cable, but it will be 16 bit only. Also, you can save Patch
> Bay setups in your default song for all your likely bouncing scenarios.Some of my favorite tracks I've gotten with upright bass in a
jazz setting have included sticking an Earthwoks QTC1 up under
the bridge.The QTC1 is omni so you get bleed,but its jazz and
gives a nice woody sound.But then you have to make sure you get
the mic nice and snug so it doesn't slide in the foam or whatever
you wrap it in;and keep the cord out of the players way.
Seems like this could be a nice alternative(I just saw the pic
of it).

Pete
"gene lennon" <glennon@NOSPmyrealbox.com> wrote:
>
Re: "Celtic Woman" PBS - 4060 [message #61191 is a reply to message #61185] Sun, 11 December 2005 16:29 Go to previous messageGo to next message
Pete Ruthenburg is currently offline  Pete Ruthenburg   
Messages: 127
Registered: June 2005
Senior Member
ank">http://www.planet-waves.com/Pcablesdetails.aspx?ID=2
>>
>>Files are posted @
>>www.mercysakes.com
>>
>>Good Luck !!
>>
>>
>>Please send your entry to:
>>Morgan@Eastcoastmusicmall.com
>>
>>Any questions - Call or Email me
>>
>>Morgan
>>Eastcoast Music Mall
>>800-901-2001
>>
>>
>>
>
>
>Greetings ,

Since no one has successfuly put the mics in order
so far .
Listen to the files and guess which one is the
Holy grail of mics - the U47 :)

http://www.mercysakes.com/paris/Morgan%20Pettinato/Mic%20Con test/

Good Luck - Prizes will still stand !
info on my previous post ( Listening challenge @ the File vault )

MorganLetsee.....over the last couple of days, while channel surfing, I've run
across Dawn Of The Dead, Night Of The Living Dead, Day Of The Dead, Shawn Of
The Dead and a very bizarre and disturbing flick called Resident Evil.

Is it just me or does this seem like some pretty bizarre and arguably
inappropriate programming for the holiday season?........then again....at
least I'm not watching the 400754th rerun of It's a wonderful Life.....yet.

Maybe I'm just old and out of touch.

;oPAnd "Wolf Creek" releases Christmas day...

Eat your turkey and go watch a horror flick...great way to celebrate the
birth of a savior.

:-(

JH

DJ wrote:
> Letsee.....over the last couple of days, while channel surfing, I've run
> across Dawn Of The Dead, Night Of The Living Dead, Day Of The Dead, Shawn Of
> The Dead and a very bizarre and disturbing flick called Resident Evil.
>
> Is it just me or does this seem like some pretty bizarre and arguably
> inappropriate programming for the holiday season?........then again....at
> least I'm not watching the 400754th rerun of It's a wonderful Life.....yet.
>
> Maybe I'm just old and out of touch.
>
> ;oP
>
>I saw something even more frightening tonight fellas..........
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
.... a very brady christmas....
<shivers>
AA


"Jeff hoover" <jkhoover@excite.com> wrote in message news:439d352b@linux...
> And "Wolf Creek" releases Christmas day...
>
> Eat your turkey and go watch a horror flick...great way to celebrate the
> birth of a savior.
>
> :-(
>
> JH
>
> DJ wrote:
>> Letsee.....over the last couple of days, while channel surfing, I've run
>> across Dawn Of The Dead, Night Of The Living Dead, Day Of The Dead, Shawn
>> Of
>> The Dead and a very bizarre and disturbing flick called Resident Evil.
>>
>> Is it just me or does this seem like some pretty bizarre and arguably
>> inappropriate programming for the holiday season?........then again....at
>> least I'm not watching the 400754th rerun of It's a wonderful
>> Life.....yet.
>>
>> Maybe I'm just old and out of touch.
>>
>> ;oP
>>now that's a horror movie; those others imho are just pretenders.

On Mon, 12 Dec 2005 02:44:05 -0600, "Aaron Allen"
<nospam@not_here.dude> wrote:

>I saw something even more frightening tonight fellas..........
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>.
>... a very brady christmas....
><shivers>
>AA
>
>
>"Jeff hoover" <jkhoover@excite.com> wrote in message news:439d352b@linux...
>> And "Wolf Creek" releases Christmas day...
>>
>> Eat your turkey and go watch a horror flick...great way to celebrate the
>> birth of a savior.
>>
>> :-(
>>
>> JH
>>
>> DJ wrote:
>>> Letsee.....over the last couple of days, while channel surfing, I've run
>>> across Dawn Of The Dead, Night Of The Living Dead, Day Of The Dead, Shawn
>>> Of
>>> The Dead and a very bizarre and disturbing flick called Resident Evil.
>>>
>>> Is it just me or does this seem like some pretty bizarre and arguably
>>> inappropriate programming for the holiday season?........then again....at
>>> least I'm not watching the 400754th rerun of It's a wonderful
>>> Life.....yet.
>>>
>>> Maybe I'm just old and out of touch.
>>>
>>> ;oP
>>>Hey all. I little while back my paris computer failed. I bought a new motherboard,
CPU and memory (Pent 4). After getting all back together, I noticed that
my computer was louder! So I researched and read some good reviews on teh
Antec Sonata. I bought one and anxiously transferred everything to the new
case. Got to the last component, the Paris EDS card and guess what? Yep,
it don't fit. Sheesh! There is an open area on the case's bottom slot to
allow the card, but my motherboard (Epox) is a small factor and only has
3 PCI slots and it don't go down that far.

Now I really love this case. It IS very quiet and I like how components are
installed easily. Internal drives are installed with rubber washers, etc.
So I want to definately keep this case... especially since I paid almost
a hundred for it!

My options: As most of you know there are a few external PCI boxes that
allow using PCI cards. But they are so expensive. I scratch my head why
they would charge double the cost of a bare bones computer for this... Anyway,
perhaps I found another alternative. As I stated, the EDS card would fit
in the bottom case lot, but wouldn't go into a motherboard PCI slot. I found
a company that sells PCI extenders. I wrote to them and STILL waiting for
their reply, but is anyone familiar with these products?

http://www.risercardshop.com/items~CartId~%7B35EED1B9-E142-4 35C-8CFB-B4EVEREST819EF82CC5%7
Re: "Celtic Woman" PBS - 4060 [message #61215 is a reply to message #61185] Mon, 12 December 2005 08:48 Go to previous message
tonehouse is currently offline  tonehouse   UNITED STATES
Messages: 184
Registered: July 2006
Senior Member
/> >
> 2. TELEFUNKEN U47 (BLUE)
> LO-MID TONAL CENTER, FLAT HIGHS, BELOW AVERAGE REACH.
>
> 3. SE GEMINI
> HI-MID TONAL CENTER, EXTENDED HIGHS, VERY GOOD REACH.
>
> 4. SOUNDELUX U95 (AKG C12)
> MID TONAL CENTER, EXTENDED HIGHS, AVERAGE REACH.
>
> 5. SE ICIS
> MID TONAL CENTER, EXTENDED HIGHS, GOOD REACH.
>
> John wrote:
>> Too quiet, I can't hear them. Sorry
>>
>> Morgan wrote:
>>
>>> Greetings ,
>>>
>>> Since no one has successfuly put the mics in order
>>> so far .
>>> Listen to the files and guess which one is the
>>> Holy grail of mics - the U47 :)
>>>
>>> http://www.mercysakes.com/paris/Morgan%20Pettinato/Mic%20Con test/
>>>
>>> Good Luck - Prizes will still stand !
>>> info on my previous post ( Listening challenge @ the File vault )
>>>
>>> Morgan
>>>
>Don't touch them. They are continuously rotating. You cannot just turn them
to a stopping point and thne back them off a certain amount. You will need
to feed them a test tone.

"cujo" <chris@nospamapplemanstudio.com> wrote in message
news:439dbc74$1@linux...
>
>
> I am finding that with my BAE and OSA pres the sigal is way too hot into
> Paris.
> What is the best wey to set the inputs in the 8 in? is there a problem
with
> just tuning em way down? Are they detended? I dontl want to touch em ti
find
> out.
> Should I run a tone trough em and even em all out?
>
> Thanks.
> C> I searched through here and I see DJ stated that the Magma boxes work
well
> with the EDS card. At $1400 a pop, it's had to justify. Oh well... time
> to rethink things.... thanks...

You can find Magma chassis' used for much less than this. the best place to
fish around for one is on the digidesign User's forum in the For Sale area.
Those poor guys have to upgrade their hardware every 10 minutes or so and
quite often they sell their 32 bit Magma's cheap. I got my 13 slot Magma
there for $250.00.

Deej


"Ed" <askme@email.com> wrote in message news:439d6a33@linux...
>
> Hi Kim. You probably don't remember me too well, but I been around on here
> for a number of years. Mostly lurking and had various usernames... anyway,
> my question was mainly about the products from risercardshop.com. I was
> hoping someone was familiar with their products. Yes, I am only using one
> EDS card. My last resource is to either pay the ridiculous price for an
external
> PCI box or buy a hand tool metal cutter and cut out a hole for the one
card.
> Since you are familiar with the case, and you agree that tearing out
internal
> drive bay would be difficult, I think the better option would be to cut a
> hole for the EDS card. I suppose no one found a cheaper external PCI box.
> I searched through here and I see DJ stated that the Magma boxes work
well
> with the EDS card. At $1400 a pop, it's had to justify. Oh well... time
> to rethink things.... thanks...
>
> "Kim W." <no@way.com> wrote:
> >
> >Ahh, Deja Vu.
> >Yep, I too bought the Sonata, and it ended up being the case for
> >my Cubase box.
> >I toyed with the idea of ripping out the lower drive bays, so I could fit
> >my EDS's (4 of them), but in the end it was all too hard.
> >Rip out the power supply and stick it in your existing box.
> >(Antec supplies are quiet.) I doubt whether you'd notice the noise
difference.
> >With one EDS card, I'm sure heat build-up won't be an issue,
> >so don't even worry about the 5 1/4" case fan.
> >Good Luck.
> >Kim
> >
> >
> >"Ed" <askme@email.com> wrote:
> >>
> >>Hey all. I little while back my paris computer failed. I bought a new
motherboard,
> >>CPU and memory (Pent 4). After getting all back together, I noticed that
> >>my computer was louder! So I researched and read some good reviews on
teh
> >>Antec Sonata. I bought one and anxiously transferred everything to the
> new
> >>case. Got to the last component, the Paris EDS card and guess what? Yep,
> >>it don't fit. Sheesh! There is an open area on the case's bottom slot
> >to
> >>allow the card, but my motherboard (Epox) is a small factor and only has
> >>3 PCI slots and it don't go down that far.
> >>
> >>Now I really love this case. It IS very quiet and I like how components
> >are
> >>installed easily. Internal drives are installed with rubber washers,
etc.
> >> So I want to definately keep this case... especially since I paid
almost
> >>a hundred for it!
> >>
> >>My options: As most of you know there are a few external PCI boxes that
> >>allow using PCI cards. But they are so expensive. I scratch my head why
> >>they would charge double the cost of a bare bones computer for this...
>
> >Anyway,
> >>perhaps I found another alternative. As I stated, the EDS card would
fit
> >>in the bottom case lot, but wouldn't go into a motherboard PCI slot. I
> >found
> >>a company that sells PCI extenders. I wrote to them and STILL waiting
> for
> >>their reply, but is anyone familiar with these products?
> >>
>
>> http://www.risercardshop.com/items~CartId~%7B35EED1B9-E142-4 35C-8CFB-B4EVE
REST819EF82CC5%7D~Cc~PCI32~iTpStatus~0~Tp~~Bc~.asp
> >>
> >>I want to mount the EDS card in my case's bottom slot and perhaps use
one
> >>of these items to extend from the motherboard. Will this work or has
anyone
> >>tried this? I believe I need a certain voltage too. Anyone know what
> voltage
> >>the EDS card is? Or has anyone found an alternative to the PCI
external?
> >> Thanks... ~ Ed
> >>
> >
>http://theaudiocave.com/flex1.wmvThanks DJ.
Oh, I have a tone CD that is for ear training but the tones are
Previous Topic: A fascinating interview . . .
Next Topic: The holiday spirit is really evident in TV programming
Goto Forum:
  


Current Time: Sat Nov 23 11:38:29 PST 2024

Total time taken to generate the page: 0.01967 seconds